I have always use dual-booting vista--ubuntu, I am getting bit tired of windows, so I want to install ubuntu, specially lucid is coming soon. I want to have the possibility to install windows in case I will need it in the future, like working with Visual Studio, ubuntu always detect if windows is installed, if windows is installed first, does windows also detect if ubuntu is installed ?
View 8 Replies
Usually I have no problems with linux but with fedora it didnt automatically set up the dual boot with vista. I cant remember how to set up grub to boot vista, how to set this up.
View 1 Replies View RelatedThis is not strictly a Linux question, although I am interested in any Linux cautions as to what to avoid that could impact my Linux on the computer in question. I have Linux (openSUSE-11.1) setup on dual boot with MS-Vista on a Dell Studio 1537 laptop. My wife is "fed up" with Vista, and has asked that I replace Vista with WinXP on this Laptop. I would like to do this over the Christmas holiday break. The laptop's 1 year support warrantee has expired. can someone explain to me the function of the two Dell /dev/sda1 and /dev/sda2 partitions ?
This laptop was purchased with MS Vista installed, with 3 primary partitions (small /dev/sda1 (called "Dell Utility" ),10GB /dev/sda2 (unknown - appears to be some sort of Dell backup/recovery partition ? ), /dev/sda3 (MS Vista which had the remainder of the 250GB drive, although I have subsequently reduced this to 69GB ).
Again, I note /dev/sda3 is the 69GB MS Vista partition (I reduced it to 69GB when I installed Linux (openSUSE-11.1)). I also believe it may be in /dev/sda3 where I should plan on installing winXP. Currently I have openSUSE-11.1 Linux in /dev/sda4 (divided into extended partitions, with /dev/sda5 (swap), /dev/sda6 (root), and /dev/sda7 (/home) for Linux and it works well. I plan to keep openSUSE-11.1 Linux when Vista is replaced by WinXP Can I remove and merge /dev/sda1, /dev/sda2, and /dev/sda3 and replace them with one partition for WinXP ?
Or am I better OFF keeping /sdev/sda1 (Dell Utility) ? and am I better off to keep /dev/sda2 (some sort of Vista ?? recovery) ? and only put winXP on /dev/sda3 ? Aside from the MBR with Grub being destroyed (when I replace Vista with winXP) is there anything else I need to be careful of wrt keeping my openSUSE-11.1 Linux install on this laptop ?
I've also sent a slightly different version of this post as a question to the Dell Support mailing list. p.s. for information, here is some output from Linux commands showing the contents:
[Code]....
I 'm currently using grub to dual boot Windows Vista and Ubuntu 10.10.These are some of my partitions:
- one NTFS partition for Vista
- one NTFS partition for my Vista Data (shared with Ubuntu)
- one ext3 partition for Ubuntu (mounted at /)
- one very large ext3 partition for my Ubuntu home folder (mounted at /home)
I would now like to add Windows XP to this setup, but I am not sure where to start.I know I need to somehow shrink the large ext3 partition so I have an extra partition for XP, which should be NTFS.Then I assume I need to install XP on this partition, and somehow make XP appear in grub.how to do these things. Can anyone help? Please keep the instructions very basic, do not assume that I know anything.
I have a laptop running windows vista already and I need to run Red Hat 7.2/7.3 or Fedora Core 1 on there as well. I am in the process of downloading Red Hat 7.3. I haven't done this before so I'm wondering if there are any guides out there that detail how to set this up to dual boot? Is Red Hat 7.3 a better option over Fedora Core 1?
View 2 Replies View RelatedI have 3 hard drives: one with vista installed on it working fine, one with 10.04 installed on it and working fine and the last is just a media storage drive. Currently I have been unplugging the windows or ubuntu drive depending on which OS I want to boot. What do I need to do so that I don't have to physically disconnect the drives and can just pick which OS to boot on power up?
View 3 Replies View RelatedInstalling Ubuntu on the laptop said it succeeded and required a restart, then before shutting down and after the cd popped out a string of
end_request: I/O error dev sr0, sector 2xxxxxx...
end_request: I/O error dev sr0, sector
end_request: I/O error dev sr0, sector
Thing is, grub didn't install! I'm pretty sure a full install of ubuntu 10.10 in on a partition that I can't access. To complicate matters further, loading Vista necessitated a restart when it installed a "generic volume driver" by itself. Restarting vista doesn't show any difference (obviously since vista can't see linux formatted partitions).
Cannot install Ubuntu10.10 from usb stick to Vista PC for dual boot-installer crashes.Launchpad report bug not allowing me to report new bug either!I have been trying to install 10.10 ALL day unsuccessfully. Unhappy about unsuccessful outcome!
View 9 Replies View RelatedI have just downloaded Ubuntu 11.04 and am trying to install it on a dual boot system with Windows Vista. I get as far as "Allocate drive space" but there are no partitions to choose from. I currently have Windows and Linux Mint on the hard drive and want to install Ubuntu in the same partition as Mint to overwrite it.
View 9 Replies View RelatedI'm stuck with installing Fedora Core I have 2 hard drives both 80Gb I want to install a fresh copy on one of the drives to do a dual boot I have vista on the main hard drive this is where I am at Installation requires partitioning of your hard drive by default, a partitioning layout is chosen which is reasonable for most users. You can either choose to use this or create your owe. Select the drive to use for this installation?
View 10 Replies View RelatedI have a single hard-drive on a spare computer and I decided to try out Ubuntu on recommendation from a friend. I really like it now but at first I just dual-booted it, and now I want Vista gone. I know it's unnecessary to have just one OS but my hard-drive isn't particularly big and I'd prefer to have Ubuntu by itself. Can anyone tell me how to eliminate vista and leave Ubuntu as my sole operating system (I've all my files from computer on another computer so I don't have to worry about losing anything).
View 2 Replies View RelatedI wanted to start exploring web development and perhaps hosting my own server as well as learning about linux and all the things that go with it so I downloaded the ubuntu 9.1 Server edition and burned it to a CD. I thought to put it on my Dell laptop as it is newer than my main PC and I could bring it to and fro between class. It had Vista installed and I definitely wanted to keep that in the meantime until I got more familiar with Ubuntu. The laptop has a 320GB hard drive with a 10 GB recovery partition. I went ahead and formatted the 10GB to make room for ubuntu. Also I was able to "shrink" the main windows partition by 16GB to make even more room. I could not combine the two small drives but alas. I had hoped to use the 16GB partition for the main install and the 10GB for a necessary swap drive (I am completely new to all this).
So I reboot on the server CD and get to the partition section. I was following this guide here: [url]
It seemed I did not want to do anything "guided" or "automatic" because the options were listing the entire drive and again i wanted to keep my vista untouched. So I go to manual partitioning and although the guide didn't go into enough detail I went ahead and assigned an "ext2" filetype to the larger partition and a "swap" to the smaller partition. Then I went to write changes to disk and after completing one of the two successfully the installer failed to configure the swap drive. I don't know why. I restarted to make sure windows was OK and surely it was not, as I got the dreaded "missing operating system" screen. I ran the windows recovery CD and lo and behold it could not find any drives at all, much less repair them. The data I had on the vista partition were not particularly vital, but it would be nice to have it back.
So my questions are, is there a way to recovery the windows partition? And how is the correct way to configure a dual boot system with Vista and Ubuntu 9.1 Server edition?
I want to set up grub for a dual boot system of xp and vista. The thing is that I have vista installed and would have to install it ance again after setting up XP in order to use the microsoft bootloader. And secondly I slowly want to get into linux...
This is how I tried it: I have four partitions on my HD and want to install the Bootloader on /dev/sda3. I started up the ubuntu live cd, mounted partition3, opened the console and tried this command line which I found in a tutorial
grub-install --root-directory=/media/hda3 --recheck /dev/hda However I get the following error message:
mkdir: cannot create directory '/media/hda3/boot': No such file or directory
I have recently installed Ubuntu 10.04 on a Compaq Presario V3000.
To prepare the install, I freed about 15 GB of space, booted from an USB. I chose "use largest continous free space" when it got to that point and then proceeded with the rest.
Now when I choose vista it will not load properly, here's what happens:
1.Windows says loading windows files.
2.After a while, I have to choose a language.
3.Windows looks for operating systems to repair.
If I choose not to, it will take me to a menu where I can choose to fix boot problems, command line, etc...
Linux is running very well, vista is the problem here, I have a recovery disk*, but I wanted to ask you guys if that is the correct move. I really need to keep windows to run some windows only apps.
*This disk was burnt on another computer, an HP from a friend who has the same vista edition. Will this work? This computer's burner is broken..
This is actually something for my gf, she has an account on my computer(only ubuntu on it) and uses it often (Mendley, Zotero, and sciency things in general). She loved it and asked me to install a dual boot with her win system. She use SPSS for whatever kind of statistical analysis it does and she likes ms office better then open office, and I would like to leave her with the choice....
Have just installed 9.10, again, many failed attempts previously.Cannot get to boot up and show menu on dual boot with Vista initially,However when I delete the grubenv file the system boots ok and works fine.But does not show the grub menu to choose boot up choices.Got the information to delete the file on some posts elsewhere about booting problem, and tried a longshot and got into Ubuntu for the first time from trying to install now for 3 months!The problem is the file grubenv is created each time so on subsequent boot ups the sytem fails to boot again.The Grub version is 1.97 beta 4, most up to date for Karmic I think, I have seen a version 1.98 but dont think its for Karmic?
Is there a way to modify the grub.cfg file to stop this problem ( all posts say dont touch this file??Or install a script to delete the grubenv file on shutdown as a workaround for me, (I have no idea how to do this whatsoever, I'm not familiar with linux at all)I did read that this problem was fixed/patched in Grub version 2, but dosn't seem.so on my system afetr I updated it when I got into Ubuntu.I couldnt find the patch or fix, I got the information I am on about from this post:URL...It seems to say it was fixed or patched by Colin Watson reading through, but I don't really understand whats being said or how to get the patch on my system if indeed there is one?Sorry for being a bit thick about all this, its a bit beyond my brain now, hope somebody can help out as I have enjoyed my brief bit of fun in Ubuntu.
I have just installed Ubuntu 10.4 x64 onto a machine with Vista Ultimate x64. When I boot the machine, the Windows option comes up in the GRUB menu. However, when I attempt to boot Windows, I receive the following error: No such device: de80ab9f80ab7d21. error: No such partition. Press any key to continue...
I looked around and found a similar issue at [URL] However, before trying to fix the issue by guesswork or via solutions that worked for a similar, though not necessarily identical problem. I've run the boot info script (see output below) mentioned several places on this site as a valuable input for boot problem tracking. how to get Windows to boot on my computer?
[Code]...
I'm trying to get a dual boot set up for vista and 9.10
I already have 3 logical partitions
Code:
ubuntu@ubuntu:~$ sudo fdisk -l
Disk /dev/sda: 750.2 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x48000000
[Code]....
If I were to install windows vista shrink the partition to fit only the OS and dual boot Ubuntu over it would I be able to use windows programs on the Ubuntu install.
In a sense I am wondering if I can use Ubuntu as my primary OS and use my Windows Utilities through Ubuntu on the Ubuntu partition?
If not would it be possible to install them on the windows partition and launch them through Ubuntu?
Been trying this by the guess and error method for days.I know about the "Swerdna" post but it is way to difficult for me.I do this every other output from Microsoft, so it is very difficult to rememberwhat transpired. Bedsides it changes with each new distro.I'm tempted to use the VM program that Dedoimodo recommended but I don't knowhow it handles Email and urls. If they are permanent or not.
Setup:
HD1 - Vista - sda
HD2 - Opensuse 11.2 - No boot to MBR - sdb
[code]....
I recently installed Ubuntu Lucid on my sisters laptop and it will now no longer boot into Windows Vista.
When Vista is selected, the loading bar is briefly displayed before the screen turns black and returns to GRUB.
EDIT : More specifically, first a long bar is displayed at the bottom of the screen that says something like 'loading windows files' above it. Then the standard vista loading bar, with (c) microsoft under it. Then I get an hourglass pointer and a message "please wait a moment" in the centre of the screen. After a few seconds, the screen then goes black and the computer reboots.
I used a live CD to install Ubuntu and I chose the default automatic option for the dual boot partitioning. All the data on Windows can be accessed from Ubuntu, it just will not boot.
Here is the output of the boot info script:
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in partition #5 for /boot/grub.
[Code].....
upgraded from 9.10 to 10.04 beta today.Ubuntu boots but not Vista boot info script info for my system as follows...Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #7 for /boot/grub.
=> No boot loader is installed in the MBR of /dev/sdb
[code]...
I just successfully upgraded to 10.04 on my Ubuntu-Vista dual boot SONY VAIO. I do have a separate Ubuntu partition for /home. I have decided I want to abandon Vista entirely and do a fresh install of 10.04 so I will be able to use GRUB2. How do I proceed, short of totally wiping out the drive?
View 1 Replies View RelatedI'm new to the world of Ubuntu 10.10. My PC had windows Vista running on an 80GB HDD, and on Friday 03/12/10 I decided to install Ubuntu 10.10 on a second 160GB HDD. Wrongly I assumed I could simply have 2 HDD's in my PC and it would magically allow me to chose between Windows Vista and Ubuntu 10.10. Well that was 50 hours ago and I still can't get it to work. As you can see I have the results of my boot_info_script055.sh below.
PHP Code:
Boot Info Script 0.55 dated February 15th, 2010
Boot Info Summary:
Grub 2 isnstalled in the MBR of /dev/sda and looks on the same drive in partition # 1 for (,msdos1)/boot/grub.
=> Windows is installed in the MBR of /dev/sdbsda1:
File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 10.10
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub .....
Firstlyi want to specify that i read many threads and guides before posting this, tried to follow some advice and solutions but nothing worked (but I am a beginner user, and maybe i did something wrong!)My laptop is a Lenovo SL410 (i bought it in China) which came with pre-installed Windows Vista.I had many trouble with resizing the partition in order to make room for Ubuntu but i finally managed. I successfully installed Ubuntu 10.04 and everything works fine.My problem is that Grub shows"Windows Recovery Environment (loader) (on /dev/sda1)" instead of normal Windows Vista (which is on /dev/sda2)If i choose Windows Recovery Env. i can load Vista but is not stable, keeps crashing, or giving me warning about low memory
View 9 Replies View Relatedi have openSUSE 11.3 as my primary OS. and i want to be able to dual boot windows vista. from what i read i would have to reinstall the 11.3 to set up to dual boot. i may have that wrong.
View 2 Replies View RelatedI tried a lot of distros and the one who i liked was openSUSE, I really liked it! And now I want to install openSUSE in my PC, but, there's two problems.
1- I need to keep Windows Vista, because i am the only onein my house who knows how to use a linux (at least, use a little bit, hehe).
2- I don't know how to make a dual boot with Vista and openSUSE.
I want a tutorial showing me how to make the Dual Boot (Windows Vista x openSUSE), and, if possible, with screenshots.
My Laptop runs on Windows vista.And I just downloaded Opensuse 11.4 KDE in want to Dual Boot So I first Created around 25GB of Unallocated Space Using Disk Management in Vista and Ran SUSE live from a CDROM But i cant seem to understand the disk partition and where suse will be installed.I want to install suse only in my unallocated space.How come other distros automatically detect unallocated space.Please help.Used to tun linux virtually but i thought i'll dual boot it
View 2 Replies View RelatedI have a PC with two 40 Gb hard drives. Vista is currently installed on drive 0. Nothing is installed on drive 1. If I switch cables to the drives, Vista will be installed on drive 1. Nothing will be installed on drive 0. If I then install Fedora 10 on drive 0, will it automatically detect Vista on drive 1 and allow me the option of using Grub or something else to boot it? I want to avoid having Vista overwrite my MBR, but I don't want to piss my wife off because she can't access windows for two weeks while I figure out how to customize Grub or install something else. If I need to customize Grub, (or some other boot loader), I would need step by step instructions. Is there a book or online tutorial?
View 4 Replies View RelatedI downloaded Ubuntu about 5 months ago and love it.Problem is, I didn't know if I wanted to make it permanent on my computer, so I used the option which allowed me to download it as an application on my Windows Vista Control Panel.How can I increase the partition (I think I only have 9 GB left on my home folder) without loosing all of the preferences, applications, and hardware solutions that I have put on there?
View 1 Replies View RelatedI'm currently running Ubuntu 9.04 and Windows Vista in a dual boot system. I would like to completely erase Windows without damaging Ubuntu. I rarely use Windows and would like to clear up hard drive space.
View 9 Replies View Related
