I installed Ubuntu on my HP 550 Laptop and i've got a problem. I want to choose my WiFi connection but it says that it hasn't got a firmware.. When i click on the wireless icon, this opens:
View 4 RepliesI recently installed Debian Jesse (Gnome) onto a laptop with a Broadcom BCM4360 802.11ac Wireless Network Adapter. It does not recognize wireless internet.
I have followed all steps (linked below) to install necessary firmware, but receive this error at the last step:
modprobe: FATAL: Module wl not found.
I have having trouble getting the WiFi to work on my Gateway laptop model M6752. It has the Marvell Technologies Ethernet card. I am attaching the output of various commands like lpsci - nn, ndiswrapper -l etc. I have followed the instructions from one of the threads and got the driver installed. It even says that the device is present. I don't know why it is not connecting.Also, Under System->Administration->Network Tools, it is showing on Local Loopback and wired eth0 interface. The wireless interface is not showing up there.
View 2 Replies View RelatedHello, I just installed fedora on my Dell Insprion 1545 labtop but don't know what firmware to install to get WIFI active.
View 1 Replies View RelatedThe wifi adapter doesn't work. The system tray icon says there is a wifi adapter present, but next to it: device not ready (firmware missing).
View 7 Replies View Relatedusing Ubuntu 10.04 for a week ,I started to download some package from ubuntu software but i could not download them ,then after searching in the internet i tried a few of them but none of them worked .Finally I gave this command sudo dpkg --configure -aand I got a reply asdpkg: status database area is locked by another processthen I gave this command cat /etc/apt/sources.listand got a reply as# deb cdrom:[Ubuntu 10.04 LTS _Lucid Lynx_ - Release i386 (20100429)]/ lucid main restricteddeb-src http://archive.ubuntu.com/ubuntu lucid main restricted #Added by software-properties# See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to
View 1 Replies View RelatedWorking on Debian 7.2.0.
In a specific context I want to automatically make operationnal some USB WiFI devices, deploying automaticaly firwmare (may be not free packages) depending on device ID (vendor ID/product ID). Dev device is a Netgear WNA1000 (driver ath9k, with htc_9271.fw firmware).
I tried to reset the USB bus (modprobe -vr ehci_hcd; modprobe -v ehci_hcd) but it's not really reliable, with sometimes kernel panic.
Is there an "official" way to "mount" the device (the system create the device wlan0) just after deploying the firmware? Maybe using udev ?
I tried to implement the solution given at: [URL] on a Dell Inspiron 1525 laptop, running Ubuntu 11.04. However, I still can't connect to wifi.
I can see that the files were extracted inside /lib/firmware/ (I see a b43 and a b43 legacy folder).
The lspci -vnn | grep 14e4 returns:
Code:
0b:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g LP-PHY [14e4:4315] (rev 01)
i'd like to install the b43 firmware driver on my laptop without internet connection. It requires internet connection to download the firmware-b43-installer...tar.bz2. I have this tar.bz2 on my hard drive, the problem is i don't know how to make debian use that for the install, instead of trying to download it.
View 6 Replies View RelatedI was preferring Abiword so I uninstalled OpenOffice but have discovered that Abiword can't deal with larger documents so am trying to reinstall OpenOffice and got the error messagePrevious installation hasn't been completed.The installation could have failed because of an error in the corresponding software package or it was cancelled in an unfriendly way. You have to repair this before you can install or remove any further software.
View 2 Replies View RelatedI have recently installed Squeeze on my 2009 Acer Aspire laptop and updated the wifi firmware and still do not have wifi connection, I wasn't too concerned as I thought I would just use a usb wifi adapter however it doesn't work with that either, yet that same adpater works with Squeeze on my 2007 Desktop computer
View 10 Replies View RelatedI just installed Fedora 15 on my HP mini 210-1000, everything is working fine except my wifi is not up. It says firmware missing. How do i fix this problem? Previously I used to have Ubuntu 11.04 on it and wifi worked fine, but I need Fedora as i am using .rpm based applications. So please assist me in getting my Wifi up! lscpi gives this:
Code:
02:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)
*edit* sorry, found a solution in another post on the forum : [URL]...
When I'm in the Ubuntu software center and I try to install a new app / game, It gives me the message:
"The installation could have failed because of an error in the corresponding software package or it was canceled in an unfriendly way. You have to repair this before you can install or remove any further software."
I accidentally shutdown while my computer was installing VLC media player.
Now when I go to install it I get a message "Previous installation hasn't been completed", and I am told that I have to repair this before i can install or remove any further software.
I'm a newbie, but will post this here since it mentions specific software programs. Obviously, if I'm posting to the wrong forum topic,Trying to view linked items in firefox (sometimes media, sometimes other things, sometimes just loading pages which i believe have embedded elements) results in an error which doesn't include links or suggestions or even a complete error code.I can't remember in which app, but not firefox, I was getting an error that included a file or app or utility which wasn't installed which began with gt or possibly gtk.Going to ubuntu software center and searching for "gtk..." or trying to install media playing software such as GnomePlayer, I get the following error:Previous Installation hasn't been completed. The installation could have failed because of an error in the corresponding software package or it was cancelled in an unfriendly way. You have to repair this before you can install or remove any further software.
As a newbie, this is meaningless to me without some kind of indication of what to do next. I get this error for basically every installable option in the software center that might fix the issue of not being able to view/subscribe/download media. (eg, Gnome Mplayer, DVD::rip, Avidemux gtk+, pulse audio device chooser, gftp, bluetooth manager, geany, miro, gtkpod... the list is seemingly infinite)
after installing Ubuntu Natty Narwhal 11.04, I'm experiencing tons and tons of complications with the wireless Internet connection. I have solved most of them. Now I have only one thing left. When I hit the drop-down menu for wireless connections, it says "Wireless connection (Firmware missing)"
I have installed the driver for my wireless card but what is the firmware? I honestly don't know what it is although it's very basic. I have a Broadcom 43xx as my wireless card (specifically 4306). How do I get the firmware for it? Do I find it in Windows? Also I cannot get b43-fwcutter because I have absolutely to Internet connection on Ubuntu. To post this, I'm using Windows.
I occasionally stay at hotels where I get free wired internet but not wifi, I'd like to use my laptop as an access point so that I can have internet on my Ipod Touch. I know it's possible because after trying unsuccessfully in Ubuntu 9.04 a few times I decided to try it with windows vista and it took me a matter of seconds and both the laptop and ipod touch were surfing the internet. I'd prefer not to boot into windows just for this.
In ubuntu when I create a new wireless network, network manager shows that I'm connected to both the autoeth0 and the wireless network I created but neither computer has internet access.
I have a linksys networkrouter WiFi a laptop Windows Vista an a Laptop Ubuntu.On the vista machine i have 54mb/s on the ubuntu i have sometimes 1 and sometimes 25 mb/s When it was a Windows machine it was also 54mb/s.So y question what can i doo to speed it up ?
Some test results:
Windows:
Download 1368.2 kbyte/sec
Upload 86 kbyte/sec
Connection 631 conn/min[code]...
I have a Thomson TG782T, I live with 2 people, I don't want one of them using my internet as i never see any money for it, I don't want to change the WPA, Is there anyway i can just block the one laptop?
View 9 Replies View RelatedI have a laptop with Ubuntu 9.10. And I want to connect it to Internet using wifi. Also I have desktop with Ubuntu 9.10 (another desktop with Win XP, but for some day it will run under Ubuntu too ). I want one of this these desktops to share wifi with laptop. I think that a wifi adapter is a way to solve this problem. I found a D-Link dwa-110. i've read on forums that someone successfully installed drivers [URL]. Is there any other ways to share wifi with laptop (only 1 laptop needs to be shared with)? Had someone connected desktop with D-Link dwa-110 and laptop (as I want)? Both desktops connected to Internet via wire.
View 5 Replies View RelatedI'm having a really strange problem with my wifi connection on my laptop. The ethernet connection works fine and so does the wifi connection - as long as I sit within one meters range from my router! As soon as I take the laptop further away the connection drops. The router is still being found by network-manager and the signal is just below 100%, but when I try to establish a connection it fails.
I'm sitting here on a fresh Ubuntu 10.04 install, and I had exactly the same problem with 9.10. That time I went through a lot of different procedures, and in some strange way the problem was solved. I haven't been that lucky this time though, I've tried reinstalling network-manager, using ndiswrapper, installing the wireless backports package, tried all kinds of drivers.. nothing works.
There shouldn't be any problem with the connection itself; I've had a perfect connection downstairs but now I can't even connect if I stand two metres from the router! Has anyone experienced anything like this and managed to fix it? My wireless card is Atheros AR2413. This is an example from daemon.log
Quote:
Apr 30 00:45:51 petter-laptop NetworkManager: <info> Activation (wlan0) starting connection 'Auto Wester'
Apr 30 00:45:51 petter-laptop NetworkManager: <info> (wlan0): device state change: 3 -> 4 (reason 0)
[Code]...
Running 9.10 Ubuntu on my laptop. It connects fine to regular access poitns, but for some reason it won't connect to my android wifi adhoc sharing. I have it as dual boot with Windows and windows connects to it perfectly. From Ubuntu 9.10 it tries to connect... then just disconnects. Would be killer to be able to use it with my adhoc wifi sharing! I prefer my Ubuntu boot, rather than my windows one
View 6 Replies View RelatedI have a Dell Studio 1737 running Ubuntu 10.04 LTS.My WiFi was working fine a few days ago until I tried to boot into another mode that allows me to boot into my other Ubuntu 10.04 or Windows Vista.I booted into that Ubuntu, which I thought had been overwritten when I was having problems and installed the one I am currently using.I shut down since it didn't have anything of any use to me at the moment, and I booted back into this current Ubuntu.Now, whenever I shut my laptop screen and open it back up to login, the WiFi is disconnected.(I was also having this problem on the Ubuntu that I booted into earlier, but that WiFi did this from the start on that one.)
View 4 Replies View RelatedI have an Ubuntu laptop connected by wifi to a Cisco router and a desktopUbuntu PC conneted by wire to the same router. I would like, if it's possible to connect them without using the Internet (I mean what I want it's not just communicate between them using SSH over the Internet, for instance, but also communicate without connecting to the Internet). My DSL connection it's 4 Mb/s while my router can work up to 100 Mb/s so I would like to take advantage of these 100 Mb/s to transfer files between the two computers instead of using 4 MB/s
View 5 Replies View RelatedI can't my system because of this error: Code: linux-firmware: /lib/firmware/radeon/R700_rlc.bin exists in filesystem Note that in the beginning, it asks:
Code: :: Replace kernel26-firmware with core/linux-firmware? [Y/n] There are so many updates by now that the list fills in a few pages in the terminal! Also, I wonder why so many Arch updates get stuck or broken compared to almost any other distro? Is it poorly designed packages? Is it a design flaw in pacman/the package format?
I cant get wifi working on my laptop anyone have any ideas or can you poingt me in the right direction, also anyone know if hdmi is supported in debian
[Code]...
I've been using Ubuntu for a few years now and in general am very pleased with it; it's Achilles Heel is however WiFi.My daughter has an older HP laptop with built in Broadcom wifi, Lucid did not recognise this, neither did it recognise a Netgear PCI card or a Netgear USB adapter.Network manager showes wifi greyed out.lspci -vnn shows BCM4303 802.11b [14E4:4301] (rev 02)lshw shows *-network:1 UNCLAIMED and shows product as BCM4303 802.11b wireless LAN controller.Wifi is the most popular connection method for the average user, until it is made simpler to resolve problems a lot of potential Linux users
View 3 Replies View RelatedUbuntu 10.10 (kernel 2.6.35-23, amd64), Network Manager is installed, the laptop HP 6735s (I am certain that wifi is working, - I can connect to other wireless networks), connected to the Internet through ppp0 (VPN), eth0 looks at LAN interface, WiFi - eth1 (info from iwconfig).
WiFi driver "Broadcom 802.11 Linux STA wireless driverfor use with Broadcom's BCM4311-, BCM4312-, BCM4321-, andBCM4322-based hardware" is installed.
Objective - to create WiFi access point and connect through it to ppp0 with my phone (HTC Desire) or other devices.
My VPN connection (ppp0) and network are registered through my internet provider's script - [URL], not set up not by Network Manager. If I create a new wireless network in NM (point-to-point or access point, IPv4 set to auto) - laptop can not find the network, Internet immediately fall off. Through the manual settings and complex scripts that I found websites and forums I could not get it to work ..
I have an emachines D620 laptop running Ubuntu 10.10 with a Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01). I havent done anything with it and cant seem to get it to work. I know this because when I had visto on it the card worked, but know it says that its firmware is not enabled and ive tried installing the drivers using the Additional Drivers under Administration. I would like it to be working so I can use my laptop's internet.
View 5 Replies View RelatedWith most Linux distributions, I can only get a short range to connect my laptop to the wifi. However, when using Ubuntu 10.10, this issue seemed to cure itself and I was able to use wifi in my room. I recently installed Ubuntu 11.04, but suddenly my wifi issues have come back again - I can only connect if I am near my router.
I am using an Intel Wifi 5100. I should also note I can get a wifi connection if I boot into Windows 7.