I tried to implement the solution given at: [URL] on a Dell Inspiron 1525 laptop, running Ubuntu 11.04. However, I still can't connect to wifi.
I can see that the files were extracted inside /lib/firmware/ (I see a b43 and a b43 legacy folder).
The lspci -vnn | grep 14e4 returns:
Code:
0b:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g LP-PHY [14e4:4315] (rev 01)
I thought I'd give Ubuntu 11.04 (Natty Narwhal??) a try on an old Dell Latitude D600 I had lying around. Install went great. Everything seems to run nice and slick.. except one thing.. the wireless is giving me the old "Device not ready (firmware missing)" So I can only use my lappy on a leash.
It's a pretty common Broadcom NIC... and I've tried running the System / Administration / Additional Drivers and nothing comes up.
It seems to me I need a driver someplace...I don't know where or how to get it installed.
i have recently installed Ubuntu 10.10 on my computer, which is HP 4710s ProBook.I've installed it with wubi and everything seem to be working just fine, except for my wireless.It is showing me: device not ready(firmware missing).
View 1 Replies View RelatedHas anyone had this problem before?,
b43-phy0 ERROR: Firmware file "b43/ucode16_mimo.fw" not found
b43-phy0 ERROR: Firmware file "b43-open/ucode16_mimo.fw" not found
couldnt find the firmware for mac 10.6 osx wireless.
Recently, I wiped my existing install of Ubuntu 10.10 and reinstalled it over. That went smoothly, except for one little snag. Now when I try to connect to the Internet, up on the top when I click the little network icon, under Wireless Networks, instead of showing the networks I can connect to, it says:
"Device Not Ready (Firmware Missing)" So I move the little wireless switch on my laptop, and then it says:
"Wireless Disabled" What did I do, and how do I fix it?
I have installed Ubuntu 11.04 on my laptop. For some reason Wireless Network does not work any more (there was installed 9.04 before).
lspci says:
Code:
00:06.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link)
System->Administration->Additional Drivers doesn't list anything.
The wifi adapter doesn't work. The system tray icon says there is a wifi adapter present, but next to it: device not ready (firmware missing).
View 7 Replies View RelatedEverytime I to turn on my wireless device, and try to connect to a wireless network, i see the phrase " device not ready" greyed out, and not able to access a wireless network. i do not know what to do
View 6 Replies View RelatedWorking on Debian 7.2.0.
In a specific context I want to automatically make operationnal some USB WiFI devices, deploying automaticaly firwmare (may be not free packages) depending on device ID (vendor ID/product ID). Dev device is a Netgear WNA1000 (driver ath9k, with htc_9271.fw firmware).
I tried to reset the USB bus (modprobe -vr ehci_hcd; modprobe -v ehci_hcd) but it's not really reliable, with sometimes kernel panic.
Is there an "official" way to "mount" the device (the system create the device wlan0) just after deploying the firmware? Maybe using udev ?
I have just installed the last FC distro, and everything works good, except the wireless network.I have a Linksys N-Ultra WirelessN USB wifi card, model WUSB600N.It uses the rt2x00 driver, concretely the rt2870 driver (at least, thats the driver included in the original device drivers CD).Right now, the problem is that i don't know how to make my Fedora 12 to enable and/or connect to internet.
dmesg | tail
usb 1-3: Manufacturer: Cisco-Linksys LLC
usb 1-3: configuration #1 chosen from 1 choice
[code]...
When I try to connect to the internet wirelessly with Fedora 14 it tells that the wirless firmware is missing. Is there anywayI can fix this or find the firmware for a Dell Wireless 1379 Wlan mini-chip? The Chipset is BCM4315Also my computer is a Dell Inspiron 1545
View 3 Replies View RelatedI've tried to install Linux systems have been failures. Trying to make this work, trying to get on the right wagon, and it's frustrating as all get-out.
Installed netbook remix onto a HP Mini 1000 (1116NR?) and everything seems to be working alright, except no wireless networking. I tried a couple of things and now it shows "device not ready" instead of "disabled", so I figure I'm getting somewhere.
The device is:
Broadcom Corporation BCM4312 802.11b/g (rev 01)
I want in. This is my 3rd try over the years of running Linux and I always hit snags like this that I can't fix because I've never gotten to play with it enough to learn what I'm doing and generally don't have a 2nd computer like I do right now.
I just installed Fedora 15 on my HP mini 210-1000, everything is working fine except my wifi is not up. It says firmware missing. How do i fix this problem? Previously I used to have Ubuntu 11.04 on it and wifi worked fine, but I need Fedora as i am using .rpm based applications. So please assist me in getting my Wifi up! lscpi gives this:
Code:
02:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)
*edit* sorry, found a solution in another post on the forum : [URL]...
I have a Dell Mini 10v with a fresh install of latest Ubuntu Netbook Edition. I have enabled proprietary drivers in order to get the WiFi card to work and managed to connect at home, starbucks etc. Good stuff.
For some reason I can detect but not connect to the WiFi at work - I get prompted for the pword and after entering it the WiFi indicater will pulse for a while only to return to the pword prompt. yes, I have the right pword and can connect my iPhone and other laptops. I am really puzzled by this and really need to get on the WiFi at work - wired connection works.
my colleague has the same dell model with windows 7 installed and is able to connect fine - I really don't want that @@@@ installed just to get WiFi. I know password entry error is the obvious solution but I connect new windows devices to it routinely and had other people try too.
I just recently installed ubuntu, my first experience with linux. I don't know if it isn't recognizing my wireless card or if it is another issue, but I am unable to view any wireless networks/connect to any. When I click on the network icon it says "wireless" with Device Not Ready underneath.
View 9 Replies View RelatedI just installed Ubuntu 10.04 and I can't seem to get the wireless connection to function. Ubuntu either says that the card is turned off or if I toggle the wireless switch on my keyboard it then says 'device not ready.' I'm using a Dell Wireless 1397 WLAN Mini-Card, and it works fine when I boot in Windows 7.
View 8 Replies View RelatedI hav googled and tried everything postedoso reinstall fedora 14but still doesnot workI try to install these 3 fileskmod-wl-2.6.35.6-45.fc14.i686-5.60.48.36-2.fc14.1.i686.rpmerr: kmod-wl-2.6.35.6-45.fc14.i686-5.60.48.36-2.fc14.1.i686 requires wl-kmod-common >= 5.60.48.36kmod-wl-5.60.48.36-2.fc14.1.i686.rpmerr:kmod-wl-5.60.48.36-2.fc14.1.i686 requires kmod-wl-2.6.35.6-45.fc14.i686 >= 5.60.48.36-.1broadcom-wl-5.60.48.36-1.fc13.noarch.rpmerr:broadcom-wl
View 3 Replies View RelatedThis morning I installed Fedora 14 on my laptop. During the setup, I was able to configure the wireless connection and use it to install additional software from the FreshRPMs and Livna repos. When the install was completed, I was surprised to find the wireless not working. When I click on the NetworkManager icon at the bottom right corner, I see "Wireless Networks" Under that it says "device not ready" and it is greyed out so it cannot be click on.
Running lspci -vnn returned
07:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR5001 Wireless Network Adapter [168c:001c] (rev 01)
Kernel driver in use: ath5k
Kernel modules: ath5k
Running lsmod confirmed that ath5k is in fact loaded.
I am running Ubuntu 10.10 Netbook Remix on a Toshiba Netbook NB300. After performing an upgrade I find myself unable to connect to my wirless network and have lost the wifi icon in the task bar. Ethernet connectivity is however working.
iwconfig shows:
wlan0 IEEE 802.11bgn ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:off
ifconfig shows
[Code]...
I need to take to bring back wireless connectivity to my netbook and restore the wifi icon to the task bar.
I tried all the threads to load and compile the driver for the Belkin wireless-N F5D8053 (Ralink RT2870 chip) I still cannot get it to come up - the wireless status says device not ready. Here is some of the system info relating to the adapter:
terry@terry-desktop:~$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:14:bf:53:02:8f
inet6 addr: fe80::214:bfff:fe53:28f/64 Scope:Link
[code]....
I have a HP Elitebook 6930 with Intel 5300 wireless card and today I update it from Fedora11 to Fedora 12 and now I cannot connect with my home wireless network. Previously with F11 I connected without problems but now the wireless connection presents a "Device not ready" message. I tried to switch on/off the wireless card but without results. I had to set intel_iommu=off as kernel parameter to complete the boot. Is something related to it?
View 2 Replies View RelatedWhen I click on the wireless I get a message saying that I am missing firmware. I've tried connecting via ethernet, however this doesn't work either, would it be a problem if I just found a download for firmware, downloaded on another comp and copy it to my linux computer?
View 9 Replies View RelatedWilreless network disconnected ...
in Dell inspiron 1525
Hello, I just installed fedora on my Dell Insprion 1545 labtop but don't know what firmware to install to get WIFI active.
View 1 Replies View RelatedMy laptop has an internal wireless device and a button to turn it on/off, but since it has bad reception I use an external USB wireless adapter.The problem is that if I turn the internal wireless device off using the button, it also turns the USB wireless adapter off.Is there anyway to use the killswitch (the button) only for the internal wireless device?This only started to happen in Ubuntu 10.04.
View 7 Replies View RelatedIn the past I've installed 9.10 using a hardwired network port for the web with the above card in the machine. After the install I got a notification of an update which downloaded the appropriate software for the above wireless card. Worked like a charm. Today I installed 11.04 and zilch. No wireless. Supposedly the firmware is missing. I guess my question is why is something that worked well in the past now missing?
View 3 Replies View RelatedI am using a hp pavilion zd7000, computer says firmware is missing for wireless controller. i also have a wirless g notebook card made by belkin which will scan for networks but wont connect to them for some unknown reason. if i can get either the wireless g card to work or the built in wireless to work thata be great. I am well experienced in windows but very new to linux and how everything works.
View 1 Replies View RelatedI had 10.04 and my wireless worked out of the box.
I just installed the latest and my wireless says "firmware missing"
The card is : 00:09.0 Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03)
Fedora OS: 2.6.38.8-35.fc15.i686 NOtebook: Compaq Presario V3424TU Wireless connection is not enabling and it is showing "Firmware missing" I need to connect wireless to help my final year project.
View 1 Replies View Relatedafter installing Ubuntu Natty Narwhal 11.04, I'm experiencing tons and tons of complications with the wireless Internet connection. I have solved most of them. Now I have only one thing left. When I hit the drop-down menu for wireless connections, it says "Wireless connection (Firmware missing)"
I have installed the driver for my wireless card but what is the firmware? I honestly don't know what it is although it's very basic. I have a Broadcom 43xx as my wireless card (specifically 4306). How do I get the firmware for it? Do I find it in Windows? Also I cannot get b43-fwcutter because I have absolutely to Internet connection on Ubuntu. To post this, I'm using Windows.