I recently installed Debian Jesse (Gnome) onto a laptop with a Broadcom BCM4360 802.11ac Wireless Network Adapter. It does not recognize wireless internet.
I have followed all steps (linked below) to install necessary firmware, but receive this error at the last step:
modprobe: FATAL: Module wl not found.
Working on Debian 7.2.0.
In a specific context I want to automatically make operationnal some USB WiFI devices, deploying automaticaly firwmare (may be not free packages) depending on device ID (vendor ID/product ID). Dev device is a Netgear WNA1000 (driver ath9k, with htc_9271.fw firmware).
I tried to reset the USB bus (modprobe -vr ehci_hcd; modprobe -v ehci_hcd) but it's not really reliable, with sometimes kernel panic.
Is there an "official" way to "mount" the device (the system create the device wlan0) just after deploying the firmware? Maybe using udev ?
I installed Ubuntu on my HP 550 Laptop and i've got a problem. I want to choose my WiFi connection but it says that it hasn't got a firmware.. When i click on the wireless icon, this opens:
View 4 Replies View RelatedI'm having an issue with the installation. I've downloaded the live ISO and put it on my USB. Everything appeared fine except for the wireless because it requires non-free firmware. The installation tells me that I can insert a USB device with the firmware on it, so I ran to a different computer to download it off the manufacturer's website and put it on the root of another USB.
However, when the installation tries to detect the firmware on the USB, it fails.
The installation is claiming to look for rt2561.bin. I have placed this in the root of the USB as well as the .zip file it came in and a .bz2 file for manual installation of the firmware. Unfortunately, I cannot install the firmware manually either because the system is missing various commands (make, etc.). I am assuming these would be installed automatically with an internet connection.
After a dist-upgrade in Sid, i get the following message: W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168d-2.fw for module r8169
View 6 Replies View RelatedI am trying to install my D-Link DWL-G120 usb wireless.
I have followed instructions [url] and installed the firmware in /usr/local/lib/firmware/isl13386usb/ and I have also tried the firmware 13390usb
dmesg output:
Obviously its not loading the firmware for some reason, iwconfig shows no wireless devices.
Hello, I just installed fedora on my Dell Insprion 1545 labtop but don't know what firmware to install to get WIFI active.
View 1 Replies View RelatedWhile attempting to install 7.7 on i7 Samsung notebook, iwlwifi and rtl_nic files cannot be found on usb or sdc (have no floppy to try) Added the missing files to iso and burned new disc which would not boot.
View 1 Replies View RelatedDELL Inspiron 15 3543 (3000 Series)5th Generation Intel Core i5-5200U Processor (3M Cache, up to 2.70 GHz).I have installed Debian 8 and received following message relating missing firmware files rtl_nic/rtl8106e-1.fw (EDIT: I understand this is not wireless adapter, but wired adapter which appears to be working ok as I can connect to internet ok.)The wireless adapter wasn't recognised so I used LAN cable and completed the install.this is details of wireless adapter....
Code: Select allit@it:~$ lspci -vvnn | grep -A 9 Network
06:00.0 Network controller [0280]: Broadcom Corporation BCM43142 802.11b/g/n [14e4:4365] (rev 01)
Subsystem: Dell Wireless 1704 802.11n + BT 4.0 [1028:0016]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
[code]...
I would like to upgrade from Win8.1 to Debian 8. This post might require some Wind expertise as well. I have to deal with the dreaded UEFI interface.
I got the iso with the added firmware from here: [URL] ....
The i386 download and it appears to be 334 MB. I pretty got it because I don't want to mess with the wireless controller (been there done that.)
As far as the Wind side goes I disabled secure boot. Just whenever I get to the fancy blue screen, I select boot from EFI DVD. Then it just says it can't load it and asks if I want to continue loading the OS. This might be useful I used the default Desktop Burning Gadget to burn the disk image.
The wifi adapter doesn't work. The system tray icon says there is a wifi adapter present, but next to it: device not ready (firmware missing).
View 7 Replies View RelatedSo, I am having certain issues regarding Debian installation. Since my Wi-Fi card, Intel PRO/Wireless 3945ABG, requires non-free drivers not provided within Debian install image, I am bound to use USB stick during installation process to get those drivers, iwlwifi-3965-1.ucode and iwlwifi-3965-2.ucode, to enable Wi-FI on my system. However, no matter what I do, I cannot get debian-installer to detect drivers present on the machine. I have tried virtually everything - downloading drivers from multiple sources, renaming drivers properly, using ext4 instal of fat32, using gpt instead of msdos, placing files in /firmware instead of root directory - but no matter what I do, the outcome is the same. USB stick seems to be working properly. Am I bound to downloading non-free image now, or is there a solution?
View 9 Replies View RelatedNow, my issue is that I have no access to ethernet in my apartment so I need to rely on wifi for my install. But during the install when it is looking for the network hardware it never sees the TP-Link Dongle and never asks if I wan to load the firmware. I even tried it with the CD image that has the non-free drivers included but it never asks for the drivers. Any other distro, like Linux Mint 7.3, sees the dongle fine.
So is there a way to force load the realtek-firmware drivers during install?
I'm trying to install Squeeze onto a new DELL Vostro 1520 laptop. The Windows Device Manager says it is Realtek PCIe GBE Family Controller.
During the network card detection phase, it prompts to install missing firmware file rtl8168d-1.fw from removable media. I understand that this is a non-free blob removed from kernel v2.6.32.
I have a HP ProLiant DL380 server and I am trying to install Debian on it.
I had an error that said dhcp configuration failed at the base installation and Debian found my NICs but asked for driver.
I've Googled it and found out that I need to install required Broadcom NetExtreme NIC drivers.
There are images that 3rd people have created but I don't want to use them as it will be a server.
Another way to install them is to download .deb package and install it from a removable media when asked.
So I went ahead and did an expert install mode and choosed adding packages from a media so an option appeared for me to install stuff from removable media now.
Each time I choose it, my flash drive's lights are blinking but then I am getting an error says this package can not be installed are you sure to install a non signed package.
I say yes at that stage but I still can't install and then it says this is probably happening because of kernel version miss match.
I downloaded latest stable copy of Debian and also downloaded the stable squeeze copy of the driver from official Debian site too. [url]
Is this a kernel mismatch between my Deb. version and the driver?
And after many try my server started hanging at detecting network hardware stage, how can I deal with this?
Also finally I started to get this...
[url]
Is this happening because I am using wrong architecture CD?
I have i386 image and my server has 2 x Pentium 3 processor.
I tried to implement the solution given at: [URL] on a Dell Inspiron 1525 laptop, running Ubuntu 11.04. However, I still can't connect to wifi.
I can see that the files were extracted inside /lib/firmware/ (I see a b43 and a b43 legacy folder).
The lspci -vnn | grep 14e4 returns:
Code:
0b:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g LP-PHY [14e4:4315] (rev 01)
If you have a Radeon graphics chip and upgrade to Jessie, install firmware-linux-nonfree, before rebooting.
My dist-upgrade to Jessie seemed flawless until I rebooted and couldn't get into X.
Seems Jessie boots into Gnome by default, but Gnome now requires 3-D acceleration. For my Radeon graphics chip (ATI Radeon 3100), this requires firmware-linux-nonfree, which I didn't need before and was not installed as part of the upgrade.
A boot message alerted me to this need.
I was able to get X going with xinit. I used FVWM; for XFCE I believe the command is:
xinit /usr/bin/xfce4-session -- :1
and from there I installed the package firmware-linux-nonfree.
I just installed Fedora 15 on my HP mini 210-1000, everything is working fine except my wifi is not up. It says firmware missing. How do i fix this problem? Previously I used to have Ubuntu 11.04 on it and wifi worked fine, but I need Fedora as i am using .rpm based applications. So please assist me in getting my Wifi up! lscpi gives this:
Code:
02:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)
*edit* sorry, found a solution in another post on the forum : [URL]...
I've been installing multiple versions of ubunutu over years and now I better understand why I faced always problems with wifi configuration on these different baselines : Debian root of course.
Now on Debian 7.4 :
The Broadcom BCM4313 driver is not loaded by default (not free product) for my wifi card. This is stated thru the UNCLAIMED declaration
Code: Select all
sudo lshw -c network
*-network UNCLAIMED
description: Network controller
product: BCM4313 802.11b/g/n Wireless LAN Controller
vendor: Broadcom Corporation
physical id: 0
[Code] ...
Unclaimed means : no driver found (no kernel association)
So I installed the driver located in the non-free backports by adding this target into the repository
Code: Select alldeb http://http.debian.net/debian/ wheezy main contrib non-free
and install :
Code: Select allsudo apt-get update && apt-get install firmware-brcm80211
sudo modprobe brcm80211
Check seems OK :
Code: Select allsudo lshw -c network
*-network
description: Wireless interface
product: BCM4313 802.11b/g/n Wireless LAN Controller
vendor: Broadcom Corporation
physical id: 0
[Code] ....
I can't connect with wlan0, it doesn't work. I found information here regarding WPA2/PSK wifi configuration on debian : [URL] ....
so I added this setup to my interfaces file an got :
Code: Select allauto lo
iface lo inet loopback
allow-hotplug wlan0
iface wlan0 inet dhcp
wpa-ssid Hznteam-Datacenter
# hexadecimal psk is encoded from a plaintext passphrase
wpa-psk 12345678901234567890123456
It's worth ! no more wifi network are detected and ifconfig gives no ip address allocated :
Code: Select allwlan0 Link encap:Ethernet HWaddr 78:e4:00:4e:49:a3
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
[Code] ....
My debian system does not have any wifi drivers unfortunately. I suspect highly that the driver is not in the 3.2 kernel so ideally I'd like to update to a newer kernel.. However, the laptop doesn't have a network port and I don't have a network to usb cable. So in other words: updating the kernel offline using a usb stick..
View 2 Replies View RelatedI have an old Dell Latitude D630 laptop that i have just installed Jessie on. So far I am unable to get the WiFi working. I have followed a guide to add the backports repository but when i try to install the firmware i am told that there is no installation candidate.
View 1 Replies View RelatedI recently started installing Debian and I want to download and install a GUI in it. For that I could use my university Wi-Fi connection. I was told that it's a WPA2 secured connection. But when I tried to configure it, it keeps asking me for a "passphrase". I don't have a passphrase! All I have is my username and password for the Wi-Fi. What should I enter as my passphrase ? I tried both username and password and neither of them worked.
View 4 Replies View RelatedI just now down loaded firmware-brcm80211, I want to put it on a usb stick, so that when I am installing debian, and it asks to insert the "medium" that has the driver, I have it on a usb stick.
My question, do I just copy the package to the device(usb stick), or do I need to extract it onto the stick ?
I have just installed 505 on an old laptop, and it's running sweet, I'm trying to get the builtin wireless lan to work and have downloaded the atmel_at76c506.bin driver but I'm not sure what to do with it at this stage, have installed network-manager too,
View 3 Replies View RelatedI'm was trying to choose between GNOME and KDE for version 8. However both the live DVD's fail to pick up the Wifi card on my system. I am also unable to use certain basic commands such as ifconfig on the live CD. I am completely new to Linux and Debian (of course). Pardon me for the hand holding. This will be my first install of a Linux system.
What steps I can take to ensure that the Wifi card and the network card will be supported - hardware compatibility test maybe? Is there a way to try before installing? This will be a dualboot with Windows 8.1
Wifi card: Ralink RT3290 802.11bgn Wi-Fi Adapter
LAN card: Realtek PCIe GBE Family Controller
I've just finished installing Jessie and everything went well, however when I boot into the installed system the WiFi option says that the hardware is disabled. My laptop is a Lenovo G50 which doesn't have a physical switch. the odd thing is that during installation I'm able to connect to my wifi with no problem!
View 8 Replies View RelatedI upgraded my laptop from Debian Wheezy to Jessie the other day, and just as before my wifi auto-connects to my router, and I can "ping http://www.google.com" just fine, but only for like a minute. Then the Internet access dies, but I'm still connected fine to my router, and I can ping its IP address. If I connect to the router through cable / eth0 everything works just fine, and I have full Internet access.
I assume there is something wonky with how ip address is assigned after the upgrade, how can I fix this, or trouble shoot further?
(I run Gnome desktop, with network manager).
I can't my system because of this error: Code: linux-firmware: /lib/firmware/radeon/R700_rlc.bin exists in filesystem Note that in the beginning, it asks:
Code: :: Replace kernel26-firmware with core/linux-firmware? [Y/n] There are so many updates by now that the list fills in a few pages in the terminal! Also, I wonder why so many Arch updates get stuck or broken compared to almost any other distro? Is it poorly designed packages? Is it a design flaw in pacman/the package format?
I have recently installed Squeeze on my 2009 Acer Aspire laptop and updated the wifi firmware and still do not have wifi connection, I wasn't too concerned as I thought I would just use a usb wifi adapter however it doesn't work with that either, yet that same adpater works with Squeeze on my 2007 Desktop computer
View 10 Replies View Relatedafter installing Ubuntu Natty Narwhal 11.04, I'm experiencing tons and tons of complications with the wireless Internet connection. I have solved most of them. Now I have only one thing left. When I hit the drop-down menu for wireless connections, it says "Wireless connection (Firmware missing)"
I have installed the driver for my wireless card but what is the firmware? I honestly don't know what it is although it's very basic. I have a Broadcom 43xx as my wireless card (specifically 4306). How do I get the firmware for it? Do I find it in Windows? Also I cannot get b43-fwcutter because I have absolutely to Internet connection on Ubuntu. To post this, I'm using Windows.