I have a Thomson TG782T, I live with 2 people, I don't want one of them using my internet as i never see any money for it, I don't want to change the WPA, Is there anyway i can just block the one laptop?
View 9 RepliesI occasionally stay at hotels where I get free wired internet but not wifi, I'd like to use my laptop as an access point so that I can have internet on my Ipod Touch. I know it's possible because after trying unsuccessfully in Ubuntu 9.04 a few times I decided to try it with windows vista and it took me a matter of seconds and both the laptop and ipod touch were surfing the internet. I'd prefer not to boot into windows just for this.
In ubuntu when I create a new wireless network, network manager shows that I'm connected to both the autoeth0 and the wireless network I created but neither computer has internet access.
I have a linksys networkrouter WiFi a laptop Windows Vista an a Laptop Ubuntu.On the vista machine i have 54mb/s on the ubuntu i have sometimes 1 and sometimes 25 mb/s When it was a Windows machine it was also 54mb/s.So y question what can i doo to speed it up ?
Some test results:
Windows:
Download 1368.2 kbyte/sec
Upload 86 kbyte/sec
Connection 631 conn/min[code]...
I have a laptop with Ubuntu 9.10. And I want to connect it to Internet using wifi. Also I have desktop with Ubuntu 9.10 (another desktop with Win XP, but for some day it will run under Ubuntu too ). I want one of this these desktops to share wifi with laptop. I think that a wifi adapter is a way to solve this problem. I found a D-Link dwa-110. i've read on forums that someone successfully installed drivers [URL]. Is there any other ways to share wifi with laptop (only 1 laptop needs to be shared with)? Had someone connected desktop with D-Link dwa-110 and laptop (as I want)? Both desktops connected to Internet via wire.
View 5 Replies View RelatedI'm having a really strange problem with my wifi connection on my laptop. The ethernet connection works fine and so does the wifi connection - as long as I sit within one meters range from my router! As soon as I take the laptop further away the connection drops. The router is still being found by network-manager and the signal is just below 100%, but when I try to establish a connection it fails.
I'm sitting here on a fresh Ubuntu 10.04 install, and I had exactly the same problem with 9.10. That time I went through a lot of different procedures, and in some strange way the problem was solved. I haven't been that lucky this time though, I've tried reinstalling network-manager, using ndiswrapper, installing the wireless backports package, tried all kinds of drivers.. nothing works.
There shouldn't be any problem with the connection itself; I've had a perfect connection downstairs but now I can't even connect if I stand two metres from the router! Has anyone experienced anything like this and managed to fix it? My wireless card is Atheros AR2413. This is an example from daemon.log
Quote:
Apr 30 00:45:51 petter-laptop NetworkManager: <info> Activation (wlan0) starting connection 'Auto Wester'
Apr 30 00:45:51 petter-laptop NetworkManager: <info> (wlan0): device state change: 3 -> 4 (reason 0)
[Code]...
Running 9.10 Ubuntu on my laptop. It connects fine to regular access poitns, but for some reason it won't connect to my android wifi adhoc sharing. I have it as dual boot with Windows and windows connects to it perfectly. From Ubuntu 9.10 it tries to connect... then just disconnects. Would be killer to be able to use it with my adhoc wifi sharing! I prefer my Ubuntu boot, rather than my windows one
View 6 Replies View RelatedI have a Dell Studio 1737 running Ubuntu 10.04 LTS.My WiFi was working fine a few days ago until I tried to boot into another mode that allows me to boot into my other Ubuntu 10.04 or Windows Vista.I booted into that Ubuntu, which I thought had been overwritten when I was having problems and installed the one I am currently using.I shut down since it didn't have anything of any use to me at the moment, and I booted back into this current Ubuntu.Now, whenever I shut my laptop screen and open it back up to login, the WiFi is disconnected.(I was also having this problem on the Ubuntu that I booted into earlier, but that WiFi did this from the start on that one.)
View 4 Replies View RelatedI have an Ubuntu laptop connected by wifi to a Cisco router and a desktopUbuntu PC conneted by wire to the same router. I would like, if it's possible to connect them without using the Internet (I mean what I want it's not just communicate between them using SSH over the Internet, for instance, but also communicate without connecting to the Internet). My DSL connection it's 4 Mb/s while my router can work up to 100 Mb/s so I would like to take advantage of these 100 Mb/s to transfer files between the two computers instead of using 4 MB/s
View 5 Replies View Relatedubunut 10.04, does anybody know how i can turn my ubuntu laptop into a wifi hotspot?
View 1 Replies View RelatedUbuntu 10.10 (kernel 2.6.35-23, amd64), Network Manager is installed, the laptop HP 6735s (I am certain that wifi is working, - I can connect to other wireless networks), connected to the Internet through ppp0 (VPN), eth0 looks at LAN interface, WiFi - eth1 (info from iwconfig).
WiFi driver "Broadcom 802.11 Linux STA wireless driverfor use with Broadcom's BCM4311-, BCM4312-, BCM4321-, andBCM4322-based hardware" is installed.
Objective - to create WiFi access point and connect through it to ppp0 with my phone (HTC Desire) or other devices.
My VPN connection (ppp0) and network are registered through my internet provider's script - [URL], not set up not by Network Manager. If I create a new wireless network in NM (point-to-point or access point, IPv4 set to auto) - laptop can not find the network, Internet immediately fall off. Through the manual settings and complex scripts that I found websites and forums I could not get it to work ..
I have an emachines D620 laptop running Ubuntu 10.10 with a Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01). I havent done anything with it and cant seem to get it to work. I know this because when I had visto on it the card worked, but know it says that its firmware is not enabled and ive tried installing the drivers using the Additional Drivers under Administration. I would like it to be working so I can use my laptop's internet.
View 5 Replies View RelatedWith most Linux distributions, I can only get a short range to connect my laptop to the wifi. However, when using Ubuntu 10.10, this issue seemed to cure itself and I was able to use wifi in my room. I recently installed Ubuntu 11.04, but suddenly my wifi issues have come back again - I can only connect if I am near my router.
I am using an Intel Wifi 5100. I should also note I can get a wifi connection if I boot into Windows 7.
I can get wired internet if i connect the laptop to the router, but no wifi since I think I dont have the drivers. i dont see anything in aditional drivers.
View 2 Replies View RelatedAbout 20 seconds after I unplug my Laptop from the AC adapter myiFi connection disconnects. The only way to get a connection again is to shut down my laptop and remove the battery and the AC adapter (WiFi-adapter reset) and reboot my laptop. I'm running 10.10 32-bit.lspci shows me these information about my WiFi-Adapter
02:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01)
Subsystem: Device 1a3b:1026
[code]....
I downloaded ubuntu 11.04 on my HP Pavilion dv6000 laptop and the wifi on it doesn't work. I'm running it in parallel with windows xp and the wifi works find on windows (as it has always done) but once I boot the laptop in ubuntu, it doesn't recognise anything, no driver, nothing.
get the wifi working in ubuntu on my laptop. Ubuntu is pretty much useless to me if I can't get the wifi to work on it.
I've been wondering lately about what would be the best approach to take concerning WiFi on my laptop (or laptops in general) ? Understand my question concerning this is ONLY about performance and no other issue.
What is the better thing to do:
a) install a new (better) WiFi card inside my laptop,
b) remove the card inside my laptop and use a WiFi USB stick,
c) remove the card inside my laptop and use a WiFi PCMCIA card?
Is simply being external to the laptop going to give me better performance in terms of locating and using a WiFi connection? On the laptop I'm currently using I know that merely rotating the laptop can boost the connection signal strenght by 15% or more. So, I'm really wondering about this. btw, I'm seriously giving thought to glueing a 3 or 4 inch lenght of 1/2 inch pvc pipe to the lid of my laptop as a holder for a homebrew parabolic WiFi dish. The idea is to attach the USB WiFi stick to a piece of coat hanger wire. Then slide the bottom and top of the coat hanger wire into a piece of paper (that's had aluminum foil glued to it) forming a parabola behind the WiFi stick. By rotating the parabola in the pvc holder I can instantly directionalize the reception/transmission of the Wifi USB stick. I'm wondering if anyone in the forum has experienced the difference between an internal vs an external WiFi device? Secondarily, has anyone in the forum tried the parabola trick?
In my compaq pressario lap, i am using fedora7, but i am not able to acess wifi.
View 1 Replies View RelatedI am using a Fujitsu Amilo pi3560 with a Realtek rtl8172 wireless card, and running the latest driver (rtl8192se_linux_2.6.0014.0115.2010). The OS is Ubuntu 9.10.
Everything runs perfectly - when my laptop is connected with the power cord. But when I go battery the wireless disconnects after a few minutes. It then asks for the wpa password, searches for the router, asks again, and so on indefinitely, until I reboot and it all replays once more.
Running Ubuntu 10.04. Networking won't work at all. Used to work flawlessly. Problem is not hardware, because booting windows (vista) on the same machine I can still use networking.
Little story: I Was going into a short trip, then I put my computer to sleep (as usual). Trip took longer than expected and, when I came back, the notebook battery was dead. Charged it, booted the notebook (Dell Inspiron 1525) and now its network won't work at all. After reboot it even ran a filesystem scan, but problem wasn't fixed. The icon on 'taskbar' only says "networking disabled". The ethernet lights won't even light up when I connect a ethernet cable and it won't see any wifi networks. I've tried to fiddle with that little switch which would turn the wifi on and off, but all it seems to do is turn the Bluetooth on and off, as shown by the little Bluetooth icon on 'taskbar' (I've not tested bluetooth, though). I've also tried to plug a external wifi dongle but ubuntu won't even try to install it.
what's happening or what could I do to get my network working? Is there some 'magic' I can type into a terminal window to make this work?
I have a Centos5.4 64bit laptop, having an eth0 and a wlan0. I connect this wired eth0 to a wall socket to access Internet via DHCP (eg the assigned address is like 192.168.192.xx). I do not have access to the ADSL router. How can I turn this laptop into a Wifi access point to allow, say my Ipad or any wireless-only client, to access the Internet thru this laptop ?
That is, communication between iPad to laptop is wifi(ad-hoc connection ??), laptop to the ADSL router is wired LAN. The laptop need to have some bridging build in ? If you can refer me some concepts, then I can follow up from there.
Or better yet, has anybody does this before ?
This may be more suited for the networking forums, but I figured Community Cafe would be well rounded enough for someone to tell me if this is even possible (with minimal configuration that is).There are a few places I travel where I only have a wired connection to the Internet (no wifi), but when this happens is there a simple way to create an adhoc network so wireless devices can route through my computer and to the network? Reason I'm asking is I'm thinking of getting an iPad or iPod Touch which have wireless connections, but in the cases where my laptop is using a wired ethernet connection and the wireless card isn't used, I'd like to create an adhoc wireless network that'll let such wireless devices work.
View 4 Replies View RelatedI recently bought a HP g62x laptop for myself. It sports a decent Core i3 processor, 4 gigs of RAM and a 500GB HDD. It also came with Wireless-N, a real bonus because I am using a Wireless-N router. The chipset is a Ralink 5390. It came preinstalled with Windows 7, and everything works fine in there (obviously).
I then proceeded to install Ubuntu 10.10 x64 a few days ago (this is before Natty came out) and everything worked . . . except WLAN. So I plugged in via Ethernet and went looking and found that I clearly wasn't the first to discover this issue. I found a guide here that I followed to download the Ralink Linux driver (which is stated to support my chipset), configure, compile, and install. Everything went perfectly, I restarted; lo and behold, I have a list of access points. I went to connect to mine, entered the password, and now the animated "WiFi wave" logo keeps going indefinitely until you click it, and it freezes for a few minutes. It will unfreeze if you let it sit but clicking it causes the same freeze again.
I couldn't really care less about a WiFi icon freezing, but a.) it freezes everything else in the system up, not just the icon, and b.) it never actually completes the WiFi connection. I really, really don't want to be forced to use Windows because of a crappy WiFi driver!
Since Natty came out I installed that and I can't even compile the driver without fatal errors, so I reverted to 10.10 and everything is the same as it was before. Note that this is a clean Ubuntu 10.10 Desktop Edition 64-bit install, nothing updated/modified/changed besides (attempting) to install this driver.
I have recently installed Squeeze on my 2009 Acer Aspire laptop and updated the wifi firmware and still do not have wifi connection, I wasn't too concerned as I thought I would just use a usb wifi adapter however it doesn't work with that either, yet that same adpater works with Squeeze on my 2007 Desktop computer
View 10 Replies View RelatedUsing karmic on acer aspire 5332.Wifi was working from fresh install but would drop out often and sometimes freeze laptop resulting in hard reset.Installed Ndiswrapper to try wireless drivers unfortunately i can't get them to work. How can i revert back to original ubuntu drivers?
View 1 Replies View RelatedI have a Pure Evoke Flow radio that connect to my wireless router for streaming internet radio, this works fine. It also has the functionality to connect to a hard drive over wifi and play any MP3 files on it and it runs on Linux.
With Windows (sorry) I just click on the folder and make it Shareable, on the Radio I then set it to search for servers and it finds my wife's PC and plays her music.
I have (I believe) set my music directory on Ubuntu 9.10 to be shareable, it downloaded and installed a couple of files including samba and then rebooted. However my Radio cannot see it.
I have having trouble getting the WiFi to work on my Gateway laptop model M6752. It has the Marvell Technologies Ethernet card. I am attaching the output of various commands like lpsci - nn, ndiswrapper -l etc. I have followed the instructions from one of the threads and got the driver installed. It even says that the device is present. I don't know why it is not connecting.Also, Under System->Administration->Network Tools, it is showing on Local Loopback and wired eth0 interface. The wireless interface is not showing up there.
View 2 Replies View RelatedMy laptop has an internal wireless device and a button to turn it on/off, but since it has bad reception I use an external USB wireless adapter.The problem is that if I turn the internal wireless device off using the button, it also turns the USB wireless adapter off.Is there anyway to use the killswitch (the button) only for the internal wireless device?This only started to happen in Ubuntu 10.04.
View 7 Replies View RelatedI have only had a few weeks worth of experience with linux, so I'm probably considered a newbie at this but I felt like giving it a shot. I just configured my new Toshiba Satellite A505-S6969 to jaunty. Most of the transition is going well but I'm stuck with a few issues, one of which is getting my wifi to work. Right now I'm working off of an ethernet cable.spci returns
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port
[code]...
Installed ubuntu 9.10 dual boot with win7 yesterday. Everything working but Wifi. Wifi works fine with Win7. No Wifi in Ubuntu. Very confused. I have info from the wifi trouble ticket post.There does not seem to be a driver for this card anywhere.
lawrence@lawrence-laptop:~$ lspci
00:00.0 Host bridge: Intel Corporation X58 I/O Hub to ESI Port (rev 13)
00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13)
[code]....
I cant seam to find out how to get my card to work i cant find out how to install the driver or finding the wifi card on the system.
View 9 Replies View Related