Ubuntu Networking :: 10.10 + WiFi Access Point On The Laptop HP6735s?
Dec 16, 2010
Ubuntu 10.10 (kernel 2.6.35-23, amd64), Network Manager is installed, the laptop HP 6735s (I am certain that wifi is working, - I can connect to other wireless networks), connected to the Internet through ppp0 (VPN), eth0 looks at LAN interface, WiFi - eth1 (info from iwconfig).
WiFi driver "Broadcom 802.11 Linux STA wireless driverfor use with Broadcom's BCM4311-, BCM4312-, BCM4321-, andBCM4322-based hardware" is installed.
Objective - to create WiFi access point and connect through it to ppp0 with my phone (HTC Desire) or other devices.
My VPN connection (ppp0) and network are registered through my internet provider's script - [URL], not set up not by Network Manager. If I create a new wireless network in NM (point-to-point or access point, IPv4 set to auto) - laptop can not find the network, Internet immediately fall off. Through the manual settings and complex scripts that I found websites and forums I could not get it to work ..
View 9 Replies
ADVERTISEMENT
Jan 5, 2011
I ought to understand the radio aspects of wifi better than I do. That said, is there a bad-good-best choice for wifi access point channel number? How does one select a channel number systematically (scientifically) rather than trial and error?
View 4 Replies
View Related
May 6, 2010
if exists a software to use a laptop as an access point
View 1 Replies
View Related
Apr 12, 2009
I'm sure that some of us techies have found the need from time to time to have a portable wireless bridge (see ascii art below) on our jaunts into the big bad user-woods, and I am here to ask the question of HOW to pull this off, with the least installation/configuration possible, as my tech lappy is also my main computer. What I want to do is this:
Code:
(ISP) -> (wlan0 - [MyLappy] - eth0) -> (Client computer)
Basically, thats a mess, so i'll explain it further:
wlan0 grabs the netz, and a computer connected to eth0 via switch/router/crossover cable can access those netz.
1. No configuration on the client would be prime choice rib for me.
2. Client should be any OS/Arch.
Any grand ideas out there? Currently using FC10, with various extra repos enabled.
Oh, and N00by alert, I'm learning quick, and am not shy to try new/complicated things, just bear with me!
View 4 Replies
View Related
Mar 3, 2011
I have a windows 7 (64bit sadly) desktop computer with no wireless capability. Now before I go out and spend money on a wireless usb thing, I was wondering if I could use my laptop (Ibm think pad T60 running ubuntu 10.10 dual boot with crunch bang) As a wireless access-point and connect via Ethernet cable the laptop to the desktop (Probably through a modem?) so I can use the Internet for games on the desktop computer. (Games that wont work in wine, sigh). Just a note though, 64 bit windows 7 will NOT run anything.
View 1 Replies
View Related
Jun 23, 2009
I'm trying to make my F10 Laptop a wireless Access point.
When I 'iwconfig wlan1 mode Master' I get:
SET failed on wlan1; Invalide argument.
wlan1 is a Netgear WG111v2 which worked as soon as I plugged it in after I installed F10.
I don't know is it not supported? What is? Is there a different driver I can put on that will work in master mode.
What should I do basically?
View 1 Replies
View Related
Jul 27, 2010
I have a Centos5.4 64bit laptop, having an eth0 and a wlan0. I connect this wired eth0 to a wall socket to access Internet via DHCP (eg the assigned address is like 192.168.192.xx). I do not have access to the ADSL router. How can I turn this laptop into a Wifi access point to allow, say my Ipad or any wireless-only client, to access the Internet thru this laptop ?
That is, communication between iPad to laptop is wifi(ad-hoc connection ??), laptop to the ADSL router is wired LAN. The laptop need to have some bridging build in ? If you can refer me some concepts, then I can follow up from there.
Or better yet, has anybody does this before ?
View 4 Replies
View Related
Jul 7, 2010
First time poster, some time Linux user. I've been reading and trying to create a wifi access point on my debian server. that is {intenet-router} <-> {server + usb-wifi} <-> {network users}
I've opted for this configuration as the server will become a firewall, traffic monitoring (sick of my windows machine getting hacked). I've spent a lot of time and I don't seem to have any un-clicked links in google left. I've read quite a few howtos and threads on this site and others ... I'm definitely missing something. Running: Debian Lenny (no gui)
[Code]...
I've also installed hostapd, and attempted a few things in there. Long run I want to allow wifi users to access the net. But will probably need iptables etc but just want to pass this step. I've see a few howtos seem to use ath0. It's probably only a minor issues.
View 2 Replies
View Related
Apr 2, 2011
Whilst my office is decorated I have to move my computer. To make this as easy as possible I have setup my first ever wifi. An access point (wired to adsl router). It is working by using wicd and I am wireless at the moment. What security should I put in place (wicd says unsecured). I am probably quite safe as the nearest road or house is 200m away but I would like to learn what I need to do as this is the first time in over 20 years of computing that I have gone wireless.
View 8 Replies
View Related
Jan 4, 2011
I have a fit-PC server with Debian GNU/Linux (Lenny). I would like to use it as a wifi access point since my Linksys WRT54GS has become unstable.I have a USB Ralink wifi NIC. When I insert the card to USB I can see this with lsusb: Bus 001 Device 002: ID 148f:2573 Ralink Technology, Corp. RT2501/RT2573 Wireless Adapter.I have tried following various HOWTOs on using wifi card as AP in Linux, however, it seems that the card cannot go into monitor mode. I believe this is because I must use a newer driver or upload non-free firmware or something like that.I have tried installed wicd, but it does not help.
I bought this wifi adapter because I was told that it is one of the most common used Linux supported wifi cards that can be used as access point and a lot of other stuff.How do I set up this USB wifi card as wireless access point in Debian Lenny?
View 2 Replies
View Related
Jul 11, 2011
I'm trying to setup Access Point on my laptop using hostapd I'm using Debian squeeze and using RT2860STA. this is my hostapd config file:
[Code]....
View 2 Replies
View Related
May 13, 2009
the only error message I can find comes from "dmesg|tail"all it shows is
"no IPv6 router"any body know what is going on here or where where to look for more clues the next time I get around public wifi Oh the windoze washers and apple polishers don't seem to have any problems at all
View 4 Replies
View Related
Jul 7, 2010
I have a wireless network in my house through a Zyxel P-320W router, and I've noticing that the signal strength isn't very good in the basement. Now I have this old D-Link-624+ router lying around for a long time and I've been hoping to get it to work as an access point, that way I can move freely around the house without changing which router I'm connected to.
View 3 Replies
View Related
May 21, 2011
i'm using stuido 10.10 and am trying to get wireless to work. i've used Network Settings to enable the wireless connection with correct ESSID and Network Password, though when i type iwconfig it says Access Point: Not-Associated.how do i associate with the AP?
View 2 Replies
View Related
Jan 13, 2010
I have a Sonicwall access point, which I am able to set up through the interface, but after that I am unable to achieve a connection through my wireless card. I have a good understanding of everything involved, but really have no hands on experience when it comes to networking.
Code:
lspci
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 735 Host (rev 01)
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP)
[code]....
Also, I should have mentioned that @ the interface for the Sonicwall it said that "no DNS server had been specified", but I set it up for DHCP, and I thought my ISP is using PPPoE (which I also thought used DHCP).
View 1 Replies
View Related
Mar 25, 2010
i've finish install driver for my wireless adapter and the result like this:
Code:
rapc0d@rapc0d-laptop:~$ iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
[Code].....
View 1 Replies
View Related
Apr 15, 2010
I just installed the wicd network manager and when i was setting it up it said it couldn't find the ip address so when i input the address its saying it can't connect to a wireless access point. I am using wireless that has worked with the default network manager but will not work with this one.
View 1 Replies
View Related
Nov 7, 2010
I'm trying to set up a wireless access point and router using Ubuntu 10.10. My machine has an Atheros AR5001X+ PCI card, and eth0 is connected to an ADSL modem.After literally days and days of going in circles, I'm hoping that somebody here can help get me on track.This sort of works, though I had to go through some other contortions to get the madwifi driver to finally compile on my machine.At this point, I can see and connect to the WAP, but nothing more. When I try "sudo /etc/init.d/networking restart",
I also have a second problem, which is that I want to use WebMin to manage this server, but I cannot figure out how to get the ADSL client module configured -- RP-PPPoE version 3. It seems to expect to work with pppoe-start, pppoe-stop, and pppoe-status, but when I try to run pppoe-status it says "Link is down", even though my ppp connection is actually working.Is is possible to use the WebMin ADSL client module with Ubuntu? I spent a lot of time trying to get pppoe-start, stop, etc. working but it was a complete mess and never seemed to behave. Finally, I just put the ppp startup commands into the /etc/network/interfaces file and that worked, but now the pppoe-* commands no longer seem to function.
View 2 Replies
View Related
Nov 30, 2010
I installed it alongside Win XP, using Wubi, and it seems I use Ubuntu 10.04.Everything worked out as expected, and my wired internet connection works like a dream.However:My wireless connection seem a little buggy.I can see all networks (except WPA2) so even if I want to fix the WPA2 problem, I'd rather just open my network for now.
So my network is now open, I see it in the NetworkManager list, and as i try to connect, the following happens:The wireless symbol start flashing. From here it keeps flashing, untill it gives up.I use RT2870 drivers, and D-Link DWA-140 USB wireless adapter.
It goes without saying I am a freshman regarding Linux, so if anyone knows what to do, and cares to take the time to tell me, please do tell me in a detailed manner.I do know the basics of the Terminal, and yes, I do know how to copy/paste commands I find linux way more satisfying than Windows so far ... And thanks in advance for giving away your time More info can be given upon request (You might have to explain how to find that specific info)
View 1 Replies
View Related
Feb 12, 2011
I'm going to be working in an office with no wifi and no 3g signal but my laptop will be connected to the web via a wired network.Any way I can use the wifi card in my ubuntu laptop to create a wireless access point so my phone can connect? Would have to be easily selected and deselected as I'd then want to use wifi to connect to the internet at home.
View 1 Replies
View Related
Feb 2, 2010
i have a problem with connecting to AP with static IP. i have set the IP, netmask, and gateway manually thru network manager but still no luck. the status is connected but i cant even open a webpage. ifconfig command output not showing the IP address i entered.
View 1 Replies
View Related
Aug 11, 2010
About two years ago, my church set up a wireless access point. They gave it a WEP encryption, and wrote all the keys down on a piece of paper and taped it to the router, which was in full view, and reachable for anyone to get what they need and connect. I used it once, saved all the settings to the default network manager applet on my laptop (running Fedora Core 12), and put it back. Earlier this year, the front hall (where the router and paper with encryption keys was stored), was completely redone, and the router put up in the drop ceiling.
Mistake. Now the darn thing is sitting on top of Fiberglass insulation, and impossible to get to. There are people who need to connect, but since it's a church, and they don't really understand, they went and buried that router WITH all the encryption keys. So long story short, I need to get these people connected, but need to find the key... preferably without Hacking in. Is there a way, on the default "Network Manager" Applet, or in the terminal to VIEW saved keys?
View 1 Replies
View Related
Jan 15, 2010
Ive spent the last couple of days looking for a way to set this up and cant find the solution anywhere. Right from what iv read so far i understand i have to set the card to master mode but when i try
Code:
sudo iwconfig wlan0 mode master
i get the error
Code:
Error for wireless request "Set Mode" (8B06) : SET failed on device wlan0 ; Invalid argument.I read somewhere that the madwifi driver is up to the task but im still quite new to linux and not really sure how to change the drivers. this is what iv done so far
Code:
wget http://snapshots.madwifi-project.org/madwifi-trunk-current.tar.gz
tar xvxf madwifi-trunk-current.tar.gz
cd madwifi-trunk-r4108-20100115/
sudo make
[code].....
View 9 Replies
View Related
Apr 14, 2010
I'd like to create a wireless network so that I can connect my iPhone to the internet. I made a new network, the iPhone sees the network and apparently connects, but Safari doesn't work. It doesn't work with the default settings, and I don't know what to put in the fields. Could anyone give me a small tutorial?
View 4 Replies
View Related
Jul 31, 2010
I've a Nokia 2323 Classic which I want to use to access to the internet on my laptop.
A friend of mine with a Dell Inspiron 15 running Windows 7 could connect to the net by just pairing up and right clicking on my phone's icon in the devices menu and selecting connect to internet via access point.
I've an eMachines E725 which lacks bluetooth. To overcome this I used a dongle which was able to successfully pair up with my phone via the bluetooth menu in preferences.
So what next ? How do I use the phone to connect to the internet directly via access point ?
I noticed that I did not need any operator related settings to do so in windows 7 and the phone worked regardless of SIM card present so I assume it should work similarly in linux.
What is left is to ask the system to treat it as an internet access device and use it that way.
How do I do it ? I don't mind a commandline way but a GUI would be better because I'm not the only person using my laptop.
View 1 Replies
View Related
Sep 8, 2010
I am in a situation at the moment which means I am going to be without an ISp for a week or two, and I can't survive that long without the intenet!!! What's more, I have 8 computers that need to connect, though not necessarily at the same time, but certainly more than one at a time. Anyway, I came up with an idea to buy a Mobile Broadband Dongle, and then share the connection via my PC. Problem is, I don't know how I would go about setting my PC to be a Wireless Access Point/makeshift Wireless Router, and sharing the connection.
View 9 Replies
View Related
Sep 23, 2010
1. HP Mini 110-3000
2. 02:00.0 Network controller: RaLink RT3090 Wireless 802.11n 1T/1R PCIe
3. wlan0
4. cant find...
5. nothing come out...
6. *-network DISABLED
7. wlan0
8. Description:Ubuntu 10.04.1 LTS
9. 2.6.32-24-generic i686
10. * Reconfiguring network interfaces...
I cant see any access point from my router...
View 1 Replies
View Related
Mar 3, 2011
I have configured my router to behave like a wireless access point. I'm using hostapd as the utility to manage the access point. I am able to connect to the access point from my android phone.Now i need to send a file to the android phone from the access point.
View 1 Replies
View Related
Apr 2, 2011
I'm trying to setup my ubuntu server as an access point but am running into some issues.
The server has an Atheros wireless card (AR5008 chipset) and I have used the following link to set it up in master mode using madwifi drivers: [URL]
I then used this link to set it upas an access point using hostapd. [URL]
But inspite of following the above steps, other wireless clients in my LAN are unable to see the ssid "Linuxmaster"
Although iwconfig shows that the card is in master mode.
iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
wifi0 no wireless extensions.
ath0 IEEE 802.11g ESSID:"Linuxmaster"
[Code].....
View 1 Replies
View Related
Apr 26, 2011
10.04 in a couple of identical lenovo laptops (of friends) suddenly have stopped connecting successfully to wireless, coinciding approximately with a mains power socket fail at the modem router, now fixed. presumably the machines were trying to connect to the access point, which may or may not have been working, but themodem router was not. Now, internet connection and wireless access point is fixed ok and is back up, and i can connect wirelessly to the access point ok using an eeepc with 10.04.2 with no problem so the access point is working ok
the target laptop/s are still ok via wired ethernet, and can *also* connect to a neighbours open wireless (a british telecom so called fon network, it asks for an account password), and all local wireless networks can be seen normally, and the home access point ssid can also be seen ok. so the aptop wireless is connecting ok, but not to this particular access point now. maybe someting has got screwed up? it is wpa2 and when clicked, after a long-ish time, the authentication is requested, then given, correctly, and still not connecting, asks for authentication again etc etc. no local secure wallet is being used.
when upgrading these laptops for my friend some time ago from 9.04 i have a small recall that 10.04 had a odd thing with wireless authentication (?) bug? i have deleted the network connections gui listing for this ssid and restarted the laptop, still no joy.
View 5 Replies
View Related
