I'm using the Live CD and have followed steps to recover grub2 after XP install. (damn Windows)!
Upon rebooting I get the grub> prompt with no where to go. Upon installing grub via the Live CD I get this:
Quote:
Update:
When I do this link, upon doing the
Quote:
I get this:
Quote:
Currently I installed Windows Starter, then installed Fedora 15 Alpha from the 'Fedora 15 LiveCD'.Now, I have reinstalled Windows Starter and now my grub loader has been removed.How can I get the grub loader back, with just the LiveCD?Is it possible to do this without the LiveCD?
View 2 Replies View RelatedI recently had to reinstall Windows XP and as usual it destroyed my grub setup. I have done this before, so I simply booted from a live CD and typed this in the terminal:
Code:
sudo grub
> root (hd0,2)
> setup(hd0)
> quit
Now, the problem with it this time is that in the past in these situations I had only Ubuntu Feisty and Windows XP installed on my machine. But I have installed Ubuntu 9.04 on a separate partition (retaining the old 7.04 installation separately) since I last had to reinstall XP. Doing the above procedure restores my grub sttings to my pre-9.04 installation (i.e. I only get Ubuntu 7.04 and Windows XP in the grub menu).
Every other guide I've seen is confusing the heck outta me.
I had ubuntu, and no other OS, then I installed win7, and now I want GRUB to be my MBR.
I previously had a single 160gb drive with two partitions, dual booted for Ubuntu and XP. I then installed a new SSD drive and put Windows 7 on it and of course I lost grub on the MBR. I have gone through this before so I went ahead and booted the livd CD, installed grub then ran
root (hd0,1)
setup (hd0)
but then got these errors;
Error 22: No such partition
grub> setup (hd0)
setup (hd0)
Checking if "/boot/grub/stage1" exists... yes
Checking if "/boot/grub/stage2" exists... yes
[Code]....
I am trying to recover Grub2 after reinstalling Windows 7 on my computer (which always takes over everything). I downloaded the Ubuntu 10.10 image from here and have mounted the image using the given instructions.
After restarting my computer, changing the boot order, etc., the computer reboots and hangs at "Verifying DMI Pool Data............" I have done everything correctly, so what exactly is causing this problem? Should I restore Grub2 in some different way, then?
I just (for the first time ever) installed a version of Ubuntu. It is 10.04. I installed off of the Live Disk. I was having a great time until the first time I went to boot into it and I got the message
"Error: No such device: "long number" Grub Rescue> "
[Code]...
I am having trouble reinstalling grub so That I can see both my linux and windows partitions in the cain loader. Originally I had ubuntu, then I installed window, this wiped out grub so I had to reinstate it, and that went ok. Then I tried to get fancy and install another Linux on my machine. It did not wipe out my partitions but is defunct I have been following these instructions, [URL]
To no success. Grub2 installs fine, sudo grub-install --root-directory=/media/(my part ion) /dev/sda2 and I install it to sda2, but the" Installation finished. No error reported. This is the contents of the device map /boot/grub/device.map. Check if this is correct or not. If any of the lines is incorrect, fix it and re-run the script `grub-install'. (hd0) /dev/sda"
I am having trouble upgrading from old grub to grub-pc. I have a clean install of 9.10 on a system with a new ASUS motherboard with Nvidia RAID configured as RAID 0.Although I read the page on SATA pseudo-RAID, this doesn't seem to apply, as both 9.10 and Windows XP installed cleanly without any additional drivers required.I did notice that contrary to the documentation, 9.10 installed with grub v0.97, not the new one as claimed. It is working fine, but just to be ornery, I'm trying to upgrade to the new one, and this is where I ran into trouble.Whenever I try to run grub-upgrade, I get an error from grub-probe that 'no mapping exists for' my raid partition. Apparently grub-probe can deal with the device, but not with the fs_uuid, as follows:
twescott@latitude:~$ sudo grub-probe -t device /boot/grub
/dev/mapper/nvidia_fcacbeib5
twescott@latitude:~$ sudo grub-probe -t fs_uuid /boot/grub
grub-probe: error: no mapping exists for `nvidia_fcacbeib5'
The system seems to be recognizing the RAID with no problems, as in:
twescott@latitude:~$ sudo blkid
/dev/mapper/nvidia_fcacbeib1: UUID="28D83EB2D83E7DDE" TYPE="ntfs"
/dev/mapper/nvidia_fcacbeib2: UUID="4344165e-07c3-4da6-b640-da9bf964a74e" TYPE="swap"
/dev/sda: TYPE="nvidia_raid_member"
[code]....
I'm thinking the problem may be in my grub device.map file, which only lists the SATA raw device aliases, but I may be completely wrong:
twescott@latitude:~$ cat /boot/grub/device.map
(hd0) /dev/sda
(hd1) /dev/sdb
yestoday,after I upgrade,unable to boot windows xp. if I use grub ,windows xp can boot up.but now I want to use grub2, boot info script's results.txt is at below.
Boot Info Script 0.55 dated February 15th, 2010
Boot Info Summary: => Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #6 for /boot/grub.
sda1:
File system: vfat
Boot sector type: Fat16
Boot sector info: No errors found in the Boot Parameter Block.
[Code]....
I had Ubuntu 10.10 installed on an HP G72 laptop, and I wish to reinstall Win 7. I loaded from the recovery disks that I made before installing Ubuntu and all went fine. At the end, I need to restart. When restarting, I am getting the GRUB rescue prompt with "unknown filesystem." It surprises me that GRUB is still there. How can I get rid of it so I can boot windows?
View 1 Replies View RelatedI performed a clean install of Fedora 15 from DVD and it goes fine until the end when the install program says to reboot the computer. Once I do that, the computer hangs before Grub loads, i.e. just after all of the BIOS messages, so there isn't any error message to indicate what is wrong. I had no issues with Fedora 14.
View 3 Replies View RelatedAfter upgrading to 10.04 from 9.10 Win7 wouldn't startup any more. So I tried this HowTo: [URL] to restore Grub2. But now each time I boot up I get this two lines: error file not found grub rescue> I have NO idea what to do.
[Code]...
My Windows installation had a problem and I had to reinstall Windows. The problem now is that I need to get grub back so that I can boot into Fedora. I'm using a Fedora 11 LiveCD I had sitting around. Here are the results of the command most of the way down the first page:
Quote:
Disk /dev/sda: 250.0 GB, 250059350016 bytes
240 heads, 63 sectors/track, 32301 cylinders
Units = cylinders of 15120 * 512 = 7741440 bytes
Disk identifier: 0x000f09ab
[Code].....
I'm tempted to try the grub-install command quoted near the end of the thread, but I don't want to do anything that will hose the system.
I have Lucid installed on a computer. I added a second drive, installed Windows 7. Windows 7 boots fine if it is the only drive connected, or it is selected as the boot drive in the BIOS. I booted into Lucid, ran 'sudo update-grub' and it found the Windows 7 install on the second disk. When I try to use that Grub entry to boot Windows 7, I get this error screen:
Code:
Windows Boot Manager Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Insert your Windows installation disk and restart your computer.
2. Choose your language settings, and then click "Next."
3. Click "Repair your computer."
If you do not have this disk, contact your system administrator or computer manufacturer for assistance.
File: BootBCD
Status: 0xc0000225
Info: An error occurred while attempting to read the boot configuration data.
I seem to remember in the Grub 1.x days there was a map command that would 'swap' the drives so Windows would think it was the boot drive, but the Grub2 autogenerated command doesn't have anything like that.how to get Grub2 to boot Windows 7?
My set up is internal hard drive Windows 7, external Ubuntu Karmic. The reason I have it this way, despite Linux being my main OS, is because my internal hard drive is 6 years old and half the capacity of my external new one. Have tried quite a few set ups with various Linux platforms, but have finally settled on above. As yet, I don't know Linux or Ubuntu all that well. Getting somewhere, but it's a steep learning curve.
Because of constant errors reinstalling WinXP - umpteen installations and it keeps crashing - the problems are with security updates and SP3 - I finally bit the bullet and intalled Win 7. I only need Windows for a few essential programs or I'd happily never look at it again, so it filled me with horror doing this, but I couldn't take the crashes any more. So, today, Win 7 installs just nicely. However, I can no longer boot my external Ubuntu hard drive. The error is, 'Grub loading stage 1.5... Grub loading please wait... Error 15'. I load up the live cd, but when I try to follow instructions given to other people with Error 15 (editing files, accessing root) I don't have permissions.
I have a dual boot config with
sda1 /boot
sda2 Win7
sda3 /
sda4 Truecrypt Partition
i have grub1 working and chaonloading truecrypt loader if i choose "win7" in grub1 menu I want to install a new kubuntu (no upgrade) I have read that that there are problems with grub2 and truecrypt actually a bug that grub2 dont chainloads truecrypt boot loader many ppl seem to have problems with grub2 then i read somewhere that ubuntu install is not asking for grub2 to be installed and just installing it. is this right?
i think at least for the alternative install cd its wrong. i installed it on another pc and it asked me! it works for win7 and Ubuntu and i guess its grub2 but there is no truecrypt installed anyway, i wanted to ask is the live cd installer asks me for grub2 and what is the best and easiest way to stay with my grub and just change the menu.lst to the new kernel (i guess there will be one)
I had 9.04, then upgraded to 9.10. After screwing it up, it won't boot. Is it possible to just reinstall Ubuntu using the CD? Cause then I would get GRUB 2. I installed kde-desktop, then it failed to boot (I selected KDM) and that somehow screwed it up.
View 6 Replies View Relatedi initilally installed ubuntu 9.10 then installed windows 7 ,then i recovered grub2 using livecd as told in the post [URL] i did "sudo update-grub" and got windows 7 menu entry but when i select that entry windows 7 does not load but the grub2 is reloaded again.
i cant boot to windows 7.
Windows 7 have 100 mb partition "System Reserved" the grub2 points to that partition but still windows 7 not loaded.
sudo fdisk -l
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x3c3a81f5
[Code]....
I went through so many post but I haven't found the proper answer yet hope you have an Idea1. Grub2 saves only Linux OS as last selected no Windows OS2.It is possible to boot into a cdrom (drive)?
View 2 Replies View RelatedI've just installed the 64 bit edition of 9.10 on my workstation. My raid drivers worked without any custom installation, which is very impressive! I am however having a problem installing grub2. I boot to the live CD, run the install process, resize and partition my free space as an ext4 primary partition with mount point /. Everything installs except grub, so I'm always booting in to windows.This seems to be a bit off as I've never had this occur with dual booting before.
View 9 Replies View RelatedI have a virtual Linux server and i deleted his boot partition by mistake. Now When i try to enter the machine I see
Code:
Select allfilesystem unknown
Grub rescue >
I was told i need to reinstall the server so I've downloaded the ISO files i need.
I've connected the ISO to the machine but i don't know what yo do next.
I've read online that i need to do ls and find where the ISO is so i can boot from it.
But i get error unknown filesystem for everything so i don't know what to do?
I am trying to install fedora 10 kickstart on my server.But I can't, because my kickstart installation hangs at post install scripts.It is not showing any message & stopped.
View 1 Replies View RelatedBoth on a 10.04 and a newly installed 10.10:After BIOS post, I get no grub and just a blinking index in the upper left. I've left it for hours, never boots.How can I resolve this without getting any Grub boot options?
View 5 Replies View RelatedThis morning I updated my system as prompted by the update manager. Upon reboot, I got "grub:sh>". After doing some googling and a bit of trial and error, I managed to figure out that I can manually boot successfully by executing the following commands.
Code:
grub:sh> linux /boot/vmlinuz-2.6.31-14-generic root=/dev/sda1 loop=/ubuntu/disks/root.disk ro
grub:sh> initrd /boot/initrd.img-2.6.31-14-generic
[code]....
I had dual boot (windows XP and 10.4). I upgraded to ubuntu 10.10. Post upgrade I got a grub rescue prompt.
After that I followed the grub recovery procedure.
[URL]
I did not get any errors during the procedure.
However post reboot I get nothing. just a black screen..not disc activity either.
Recently when I booted Windows 7, a "check filesystem" thing got up, so I let it do its thing. And now when I start Windows 7 my computer reboots right after "Windows 7" logo pops up. Is there any way I can re-install/repair my Windows 7 without losing my Ubuntu partition and all my stuff on it?
View 9 Replies View RelatedWhen i tried to install windows xp and ubuntu 9.04 together i got an error as GRUB 18. Then i installed only ubuntu 9.04. Now i am planning to have both ubuntu 9.04 and fedora 12 on my system. Is it possible that i'll again get the same error? If yes what are the possible solutions?? and is it advisable to have both fedora and ubuntu in the same system??
View 10 Replies View RelatedI dont know how to put this that somobody would understand my problem but here we go. I have problem like said in title.I am unable to upgrade my kernel. Sunaptics says that I have 2.6.35-28 installed. I tried to reinstall 2.6.35-28 via synaptics but it gives me error.
Thats what uname -a says:
pekka@pekka-laptop:~$ uname -a
Linux pekka-laptop 2.6.35-25-generic #44-Ubuntu SMP Fri Jan 21 17:40:48 UTC 2011 i686 GNU/Linux
Tried to install 2.6.35-27 via terminal thats what I get:
Code:
pekka@pekka-laptop:~$ sudo apt-get install linux-image-2.6.35-27
[sudo] password for pekka:
Reading package lists... Done
Building dependency tree
code....
dpkg: error processing linux-image-2.6.35-25-generic (--remove):
subprocess installed post-removal script returned error exit status 1
Errors were encountered while processing:
linux-image-2.6.35-25-generic
E: Sub-process /usr/bin/dpkg returned an error code (1)
pekka@pekka-laptop:
I've re-installed Windows and now can't boot xubuntu 9.1. I've looked at: [URL]. I did the the fdisk -l and tried mounting each of the partitions but I couldn't mount sda4 which I think is the partition that my xubuntu is located on. A clue that this is the partition is that it is the only one of type extended as I saw in gparted. It was also the only one apart from sda5 that I wasn't able to mount and sda5 I think was an old USB partition. Anything else I could try or are you going to need the output of "fdisk -l" to get a fuller picture.
View 3 Replies View Related