Ubuntu Installation :: Unable To Boot Windows XP After Upgrade To Grub2 From Grub?
Jul 24, 2010
yestoday,after I upgrade,unable to boot windows xp. if I use grub ,windows xp can boot up.but now I want to use grub2, boot info script's results.txt is at below.
Boot Info Script 0.55 dated February 15th, 2010
Boot Info Summary: => Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #6 for /boot/grub.
sda1:
File system: vfat
Boot sector type: Fat16
Boot sector info: No errors found in the Boot Parameter Block.
[Code]....
View 1 Replies
ADVERTISEMENT
May 17, 2010
I recently performed a reinstall of ubuntu after mucking up my partitions, and I am running it dual booted with windows 7.
I recently performed a grub-pc update, but I didn't know what it was asking me to do during the process itself of updating the process.
It asked me at one point where to install grub, and I selected all my partitions because it suggested that if I didn't know. I think that may have damaged my windows section, which was also selection.
I've attached the output for:
Code:
Problem symptoms:
1) Weird upgrade error in apt-get
2) Unable to boot windows 7
3) Unable to activate proprietary drivers
4) Perpetually being reminded to restart
View 5 Replies
View Related
Apr 9, 2011
I've currently got a dual-boot setup with Vista and 10.10 (using grub2 on MBR).I'm about to install Windows 7 and would like for a change to use the Windows bootloader. I currently have a separate /boot partition and believe I can install grub2 there so that I can chainload it using EasyBCD.
I'd like to do this from my running system as I don't have a spare USB drive right now. confirm the command I should use baring in mind the separate /boot.If I have to wait and do it from the Live CD - is the command to use any different? FYI here is my current layout:
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/mapper/vg_root-root
37735960 15719388 20099644 44% /
none 1023876 316 1023560 1% /dev
[code]....
View 4 Replies
View Related
Apr 28, 2011
A few days ago I went to perform the Service Pack 1 Upgrade for Win 7. This crashed out with an error. On researching the problem I found a solution to fix the problem by marking the Windows partition as active. I did this (via Computer Mgmt -> Disk Mgmt). This allowed the SP1 upgrade to work, however on reboot I got an error BOOTMGR missing. This I rather rashly resolved by using the Windows 7 install DVD in Recovery mode to reinstall the Windows Boot manager via bootrec /Fixboot I thought I would then be able to use the Opensuse 11.2 install disk to fix grub.
I use the Opensuse install disk and select Repair system -> Expert Mode -> Install New Boot Loader then select Other -> Reread Configuration from Disk. This adds Win 7 back into the grub menu. I then select OK and get the message "the bootloader was installed successfully". The problem then comes when I click my way through OK and Next to finish the install. At the end of the process I get the message "An error occurred during the installation" and I'm no further forward.
FYI the PC has a single SATA disk installed partitioned as follows:
dev/sda1 100Mb Win System Parkition
dev/sda2 Windows NTFS
dev/sda3 Windows FAT
View 8 Replies
View Related
Mar 7, 2010
i initilally installed ubuntu 9.10 then installed windows 7 ,then i recovered grub2 using livecd as told in the post [URL] i did "sudo update-grub" and got windows 7 menu entry but when i select that entry windows 7 does not load but the grub2 is reloaded again.
i cant boot to windows 7.
Windows 7 have 100 mb partition "System Reserved" the grub2 points to that partition but still windows 7 not loaded.
sudo fdisk -l
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x3c3a81f5
[Code]....
View 3 Replies
View Related
May 17, 2010
I went through so many post but I haven't found the proper answer yet hope you have an Idea1. Grub2 saves only Linux OS as last selected no Windows OS2.It is possible to boot into a cdrom (drive)?
View 2 Replies
View Related
Apr 20, 2010
I've been dual booting ubuntu and xp for about 2 months now. i booted this morning and all i get is this grub menu. i saw the grub vs. grub2 page but have no idea even where to start.
View 5 Replies
View Related
Apr 10, 2010
I upgraded from grub to grub2 recently, and during an update of my system, it ran the update-grub command which prompted a window asking me where to install Grub. Since I didn't know what partition to install it to and the help suggested to install it to all if I was unsure what partition to install it to - I accidentally installed Grub to my Windows partitions (both the regular and the recovery console).
So now, I can't boot into Windows - the computer just hangs after Grub with a blinking cursor and I have to perform a hard reset. Is there any way for me to restore the boot record for the windows partition without having to reinstall windows from the ground up?! I can't use Linux for my webbanking and other important tasks, so (unfortunately) I need Windows back desperately!
View 2 Replies
View Related
Jun 21, 2010
I have been running a dual boot XP and Ubuntu 8.04 on two separate hard drives for a while now without any problems. I used the method posted http://ubuntuforums.org/showthread.p...light=dualboot. I will be upgrading to 10.4 soon (probably after the re-spin in July) and was wondering if I will have problems after upgrading dual booting.
I do not know if while upgrading Grub remains or if Grub2 tries to overwrite. I have read that Grub2 will try to install onto all partitions and hard drives in a fresh install but do not know about upgrading. If it does try I think I need to put it in hda,1 which is the primary drive where Ubuntu is located.
This is not something I have been able to find the answer to with google. I also have Kubuntu on the system which I can change with session manager and am not sure what will happen to that once I upgrade Ubuntu.
View 1 Replies
View Related
May 21, 2011
I moved from 8.04.2 to 10.04.2 and tried to upgrade from GRUB Legacy to Grub2. I must have made a mis-step somewhere in the process as on boot it now tells me
Code:
GRUB Loading stage1.5.
GRUB Loading,
Error 15
_
Is there a nuke from orbit, no finesse way of just ripping all the existing GRUB mess out and installing GRUB2 from Boot disk? for instance should I be just be able to boot with a LIVE CD mount the primary disk of this machine and enter the below in a terminal without messing up any further?
Code:
sudo grub-install --root-directory=/media/PRIMARY_DISK /dev/sda
View 3 Replies
View Related
May 7, 2010
I upgraded from 9.10 to 10.04 (no fresh install, an upgrade). During the upgrade, the installer asked me for the harddisks and partitions to include. I gave him the following ones:
Harddisk 1
1. Windows XP
2. Windows 2000
Harddisk 2
3. Ubuntu 10.04
After the installation was complete, I could only start Ubuntu. Both Windows versions just showed a flashing cursor at the left upper top screen. No HDD activity! How can I get WinXP and Win2000 selectable within grub2?
View 2 Replies
View Related
Jul 18, 2010
My girlfriend upgraded from Karmic 9.10 to Lucid 10.04 when the upgrade became available. She did it from Update Manager as opposed to a clean install.
I have no idea what she did, or how the process works (I installed from a Live CD on my own computer) and ever since she did it, she hasn't been able to boot into Windows XP from GRUB2.
GRUB2 loads up fine, with Ubuntu and Windows listed. It'll boot into Ubuntu with no problems. Selecting Windows will just re-load GRUB2.
I've tried re-installing GRUB2 but that hasn't worked. My lack of imagination means I have no idea what to type in to Google, or the forum search.
View 5 Replies
View Related
Feb 15, 2010
After installing karmic with Grub2 I am unable to boot into Archlinux partition. Grub2 has removed the last line of the Archlinux boot stanza! It used to read:-
[Code]....
Following the Grub2 tutorials I have tried editing /etc/grub.d/40_custom as follows:-
[Code]....
But no luck. Only way into Archlinux is to get into the edit shell and manually add the missing line and remove other stuff not needed. I have spent hours trying to resolve this issue and I am fairly p----d off
View 2 Replies
View Related
Mar 31, 2011
I installed UEFI Ubuntu 10.10. Its grub2 version is 1.98. I want to upgrade it to 1.99.I try to use 'grub-install' and 'grub-setup' commands but I faild to upgrade the grub2.
And, when I add my ram to 4G, the system hangs and displays 'Not syncing: VFS: Unable to mount root fs on unknow-block(1,0)'
View 2 Replies
View Related
Mar 27, 2010
I'm using the Live CD and have followed steps to recover grub2 after XP install. (damn Windows)!
Upon rebooting I get the grub> prompt with no where to go. Upon installing grub via the Live CD I get this:
Quote:
Update:
When I do this link, upon doing the
Quote:
I get this:
Quote:
View 1 Replies
View Related
Sep 23, 2010
I mucked things up a bit--
1) I had only windows on my drive.
2) Using 10.04 on USB, I made a 10gb ext3 partition and a 1gb swap area and installed 10.04. No problems at all using grub2, and the GUI is nice for dummies like me.
3) I got antsy so I made an 8gb partition and installed 8.04 on it. It automatically installed grub (the old grub).
Now when I boot my machine the Old Grub loads, not Grub2. I can select 8.04, 10.04, or XP no problem. When I select 10.04 and use the GUI I can see 10.04, 8.04, and XP, but things are in a different order (clearly the grub2 order).
Questions:
1) How can I get grub2 to take over booting? (I like the GUI)
2) I'd like to install puppy linux too, but I'm afraid of really screwing things up. Can someone recommend a safe way of installing it (besides just running from a USB- I've had mixed luck using USB OS's over long timeframes).
View 2 Replies
View Related
May 3, 2010
I have a asus eeepc 1101ha. With Karmic,it would boot into w7 without problems.I installed Lucid on another partition,and after that the w7 grub entry would leave me with a blinking cursor in the left top corner, and hang.
I booted with the w7 dvd, ran bootrec.exe to restore mbr and bootmgr, and the booted into w7 to confirm. It was working. Then I booted with the live dvd, mounted the lucid partition, and installed grub. Now choosing the w7 entry would ask for the boot media, and pressing any key would bring me back to the grub menu. Lucid and karmic boot without problems.
Installing grub from karmic now gave the same error. Running update-grub didn't change anything.As I had to use w7, I booted again from the dvd, and restored again mbr and bootmgr. Booted into w7, used it, then once again to the live cd, to reinstall grub, and once again the w7 entry in grub makes grub ask for the boot media.I've attached my boot info script.Ah, I also played with the bootable flag for the /dev/sda1 partition, but it didn't change anything.
View 1 Replies
View Related
Dec 10, 2010
menuentry "Windows 7 (loader) (on /dev/sda1)" {
insmod part_msdos
insmod ntfs
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set 3850d16450d12980
chainloader +1
}
This is automaticly genarated after installed ubuntu 10.10. It shows black screen with a flashing cursor after press enter. Grub 0.97 also does this with:
title win7
fallback 2
find --set-root --ignore-floppies /bootmgr
chainloader /bootmgr
savedefault --wait=2
But the wierd thing is my usb stick can boot windows 7 succesfully with the same configuration. Whats wrong with that? How can do with grub.cfg?
View 9 Replies
View Related
Jan 3, 2011
ok so sounds like everyone elses issue that i`ve seen on here but i had it all working properly until i booted into ubuntu and updated grub somehow and when it told me to reboot all i got was a grub rescue error.
Now i got ubuntu 10.10 installed to try and fix the grub 2 error but now cant get it to boot windows from the menu.
View 5 Replies
View Related
Mar 23, 2011
I had a dual boot system with 3 partitions, Windows 7 on one partition, and Windows XP on another partition and a Data partition. I decided to load Ubuntu 10.10 on the Windows XP partition.During installation I selection manual partition, and deleted Windows XP.after successful completion of Ubuntu installation "Grub" directly boots into Ubuntu, it doesn't show me the OS selection screen. After following some forum posts I did an update grub
Code:
Generating grub.cfg ...
Found linux image: /boot/vmlinuz-2.6.35-22-generic
Found initrd image: /boot/initrd.img-2.6.35-22-generic
[code]....
View 8 Replies
View Related
May 12, 2010
I recently installed Ubuntu 10.04 on my dual boot system and noticed that my boot options were changed. I typically have Windows XP as the default OS. Here are the steps that worked for me to get Windows XP as the default boot using Grub2.During my initial Window XP install I had partitioned my hard drive into 3 partitions:
Code:
Partition 1: NTFS format (Windows XP installation) in Linux it is called /dev/sda1
Partition 2: NTFS format (Data for Windows XP) in Linux is is called /dev/sda5
[code]....
View 6 Replies
View Related
May 3, 2010
I just installed Ubuntu 10.04 LTS on an external hard drive (USB connected) and I can no longer boot my Windows XP(SP3) from my internal C Drive. Grub gives me the list of boot choices, but when I choose the C drive, I just get these error messages:
GEOM ERROR
For Realtek RTL8139(X)/8130/810X PCI fast ethernet controller v2.13 (020326)
Client MAC ADDR: 00 13 D3 07 FD F5 GUID: FFFFFFFF-FFFF-FFFF-FFFF-FFFFFFFFFFFF
PXE-E53: No boot filename received
PXE-NOF: Exiting PXE ROM
(The version of Grub is 1.98-lubuntu5). I don't have a Windows System CD to boot from, but is there something I can do from within Ubuntu itself?
View 9 Replies
View Related
Jun 9, 2010
I have a dell Inspiron 5150. I had perfect windows XP home installation, and decided to dual boot with Ubunutu 10.04. I copied the whole C:/ to external drive, installed ubuntu, installed windows, repaired Grub2, but now, Grub2 looks something like this.
[Code]...
View 9 Replies
View Related
Aug 20, 2010
[URL](where loading into Windows corrupts the MBR). None of the solutions in the bug thread work for me, however--I'm on a Dell system (so it's not HP tools) and I'm not running PC Angel or any similar service (I checked). I assume it is related to the Dell recovery partition, though my old laptop from Dell didn't have this problem even though it also had a recovery partition.
However, before I had partitioned and set up Ubuntu on my new laptop, I installed Wubi (for transferring over the files from my old laptop because I didn't have time to do a full install and deal with problems like this one). Wubi worked fine using the Windows Boot Loader. I understand that WBL isn't capable of loading Linux on its own, which is why I was wondering if it was possible to have GRUB installed on a separate boot partition (not the MBR) and loaded from Windows Boot Loader. All of the information I could find on it didn't work with Windows 7--but again, I know Wubi was capable of doing it. how to set this configuration up?
View 2 Replies
View Related
Apr 13, 2011
I have two hard drives - (1) 80GB (2) 500GB: the 1st HD has 3 partitions (in that order) - Windows 7, Ubuntu 10.10 & Swap. the 2nd HD is for storage only, and has 2 partitions.
I did the following - I installed Windows 7 on the first partition of the 1st HD, it booted just fine. Then I installed Ubuntu 10.10 on the second partition of the 1st HD.
Windows 7 shows in the GRUB menu alongside with Ubuntu. Ubuntu boots just fine, but when I select Windows it simply restarts the computer and the GRUB menu shows again.
RESULTS.txt of Boot Info Script:
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in partition #3 for (,msdos3)/boot/grub.
[Code]....
View 7 Replies
View Related
Apr 30, 2011
Been away from linux for a few years thaught id come back and give it a try again. I have Win7 on sda and installed 11.4 Ubuntu on sdb. Grub2 Over wrote the boot sector for windows so windows wouldnt show in the boot menu. I repaired that after some research and then tried it again with 10.4 LTS version of Ubuntu. Same thing. Now I've fixed windows boot sector a second time and im ready for round 3. Any hints on how to get grub2 to boot both OS's? Ubuntu 10.4 is still on sdb I think I should just need to re-install grub2 But how to do it without Killing the windows boot sector?
View 9 Replies
View Related
Jul 2, 2011
I have Lucid installed on a computer. I added a second drive, installed Windows 7. Windows 7 boots fine if it is the only drive connected, or it is selected as the boot drive in the BIOS. I booted into Lucid, ran 'sudo update-grub' and it found the Windows 7 install on the second disk. When I try to use that Grub entry to boot Windows 7, I get this error screen:
Code:
Windows Boot Manager Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Insert your Windows installation disk and restart your computer.
2. Choose your language settings, and then click "Next."
3. Click "Repair your computer."
If you do not have this disk, contact your system administrator or computer manufacturer for assistance.
File: BootBCD
Status: 0xc0000225
Info: An error occurred while attempting to read the boot configuration data.
I seem to remember in the Grub 1.x days there was a map command that would 'swap' the drives so Windows would think it was the boot drive, but the Grub2 autogenerated command doesn't have anything like that.how to get Grub2 to boot Windows 7?
View 4 Replies
View Related
Nov 3, 2009
Problems with dual boot, grub2 auto os prober
Drive #1 (sda) Master CS Ubuntu 9.04 grub upgraded to grub2 version 1.96
Drive #2 (sdb) Slave CS Ubuntu 9.10 grub2 version 1.97 /boot is (sdb1) root is (sdb5)
grub2 is installed in /boot (sdb1) and the mbr of (sdb)
I want to be able to boot drive #2 from drive #1 grub menu at boot time. I have run �update-grub and it probes and finds (sdb5) and creates a new grub.cfg called grub.cfg.new in the /boot folder, but the new cfg file does not show (sdb5) or (sdb) it shows all other changes that I made such as splash screens and they are working. How do I get it to recognize drive #2 with Ubuntu 9.10. I can boot each drive independently of one another and I can boot 9.04 with 9.10 if I swap the drives around. And run update-grub The auto probe is working in the Ubuntu 9.10 and may be working partly in the 9.04.
This may or may not be a problem, but is a pain anyway. When I run update-grub in 9.04's grub version 1.96, it does not change anything in the current grub.cfg it does make a new file called grub.cfg.new I have to go into /boot/grub and change grub.cfg to old and change grub.cfg.new to grub.cfg I do not have this problem running the same command in Ubuntu 9.10's grub. It finds changes and os's and automatically updates the current grub.cfg
View 2 Replies
View Related
Apr 26, 2010
I've just installed the 64 bit edition of 9.10 on my workstation. My raid drivers worked without any custom installation, which is very impressive! I am however having a problem installing grub2. I boot to the live CD, run the install process, resize and partition my free space as an ext4 primary partition with mount point /. Everything installs except grub, so I'm always booting in to windows.This seems to be a bit off as I've never had this occur with dual booting before.
View 9 Replies
View Related
Oct 30, 2010
I upgraded to 10.10, and grub just came back with "no wubildr", and then a "no other mode", or something like that. I dual boot xp (I used it to install wubi), and I need a few files off my linux partition. Is there a way to:recover my files within windows
skip grub and go strait to ubuntu
View 6 Replies
View Related
