Ubuntu Installation :: Cannot Boot Into Xubuntu After Reinstalling Windows
Jan 5, 2010
I've re-installed Windows and now can't boot xubuntu 9.1. I've looked at: [URL]. I did the the fdisk -l and tried mounting each of the partitions but I couldn't mount sda4 which I think is the partition that my xubuntu is located on. A clue that this is the partition is that it is the only one of type extended as I saw in gparted. It was also the only one apart from sda5 that I wasn't able to mount and sda5 I think was an old USB partition. Anything else I could try or are you going to need the output of "fdisk -l" to get a fuller picture.
View 3 Replies
ADVERTISEMENT
Jan 18, 2011
I'm about to reinstall Windows XP on a system that I also have Ubuntu installed on. I'm a bit confused how the boot loader works in a dual boot system. After reinstalling XP will I have to do something, like reinstalling GRUB somehow?
View 3 Replies
View Related
Mar 4, 2010
i am having ubuntu 8.04. i have installed windows 7 but i am not able to boot into ubuntu 8.04. i have new version of ubuntu 9.10 in CD. does reinstalling the new ubuntu will overwrite my all previous data which i had in older version of ubuntu?
View 4 Replies
View Related
Apr 18, 2010
I recently had to reinstall Windows XP and as usual it destroyed my grub setup. I have done this before, so I simply booted from a live CD and typed this in the terminal:
Code:
sudo grub
> root (hd0,2)
> setup(hd0)
> quit
Now, the problem with it this time is that in the past in these situations I had only Ubuntu Feisty and Windows XP installed on my machine. But I have installed Ubuntu 9.04 on a separate partition (retaining the old 7.04 installation separately) since I last had to reinstall XP. Doing the above procedure restores my grub sttings to my pre-9.04 installation (i.e. I only get Ubuntu 7.04 and Windows XP in the grub menu).
View 9 Replies
View Related
Dec 13, 2010
Every other guide I've seen is confusing the heck outta me.
I had ubuntu, and no other OS, then I installed win7, and now I want GRUB to be my MBR.
View 1 Replies
View Related
Jun 4, 2011
Recently when I booted Windows 7, a "check filesystem" thing got up, so I let it do its thing. And now when I start Windows 7 my computer reboots right after "Windows 7" logo pops up. Is there any way I can re-install/repair my Windows 7 without losing my Ubuntu partition and all my stuff on it?
View 9 Replies
View Related
Mar 25, 2010
I have an old computer, it came with Windows 98, later I updated it with Windows XP. XP ran slowly because of it's outdated hardware. Around this time I already had a new computer. I decided to install Ubuntu on it to muck around with. However, Ubuntu also runs slowly and I have a dual-booting computer. However, when I try to get into the BIOS of the computer and run the 98 disk, I can hit every button and BIOS will not load. Question: How do I reinstall Windows if I can't access the BIOS?
View 9 Replies
View Related
Jan 15, 2011
I previously had a single 160gb drive with two partitions, dual booted for Ubuntu and XP. I then installed a new SSD drive and put Windows 7 on it and of course I lost grub on the MBR. I have gone through this before so I went ahead and booted the livd CD, installed grub then ran
root (hd0,1)
setup (hd0)
but then got these errors;
Error 22: No such partition
grub> setup (hd0)
setup (hd0)
Checking if "/boot/grub/stage1" exists... yes
Checking if "/boot/grub/stage2" exists... yes
[Code]....
View 9 Replies
View Related
Oct 12, 2014
I have a dual boot machine (Windows 7 and Debian). W7 and debian are on the same HD but on different partitions. The debian partition is an LVM encrypted one.
The W7 needs reinstalling, and as I understand the process will overwrite the debian bootloader (grub).
Question: Is there a way to save the current bootloader and recover it after I've reinstalled W7, so I wont have to reinstall debian from scratch?.
I plan to re-install W7 on the same partition it is now, without overwriting the debian partition.
View 9 Replies
View Related
Apr 12, 2011
Currently I installed Windows Starter, then installed Fedora 15 Alpha from the 'Fedora 15 LiveCD'.Now, I have reinstalled Windows Starter and now my grub loader has been removed.How can I get the grub loader back, with just the LiveCD?Is it possible to do this without the LiveCD?
View 2 Replies
View Related
Mar 27, 2010
I'm using the Live CD and have followed steps to recover grub2 after XP install. (damn Windows)!
Upon rebooting I get the grub> prompt with no where to go. Upon installing grub via the Live CD I get this:
Quote:
Update:
When I do this link, upon doing the
Quote:
I get this:
Quote:
View 1 Replies
View Related
Mar 17, 2010
After Reinstalling windows how 2 boot ubuntu i.e installed via Wubi perviously on win After Reinstalling windows how 2 boot ubuntu i.e installed via Wubi perviously on windows 7. I am running Ubuntu 9.10 on my Laptop, where it installed via Wubi on Windows 7. [windows 7 (Cand ubuntu on the different drive(U(NTFS)*its not a dual boot as installed via wubi]. For some reason My Windows needs a reinstall but in this case i think i will also lost ubuntu because its installed via Wubi.
Part 1 - I need to back up all the data that is installed in ubuntu i.e. SMplayer,Graphical GTK theme,Compiz,Emerald. and its setting,means the whole ubuntu system. So that after installing windows and ubuntu as a dual boot (not wubi again)i do not need to configure and install the whole ubuntu data/software again. Its pain for me to downlad again and again the data for ubuntu [Coz low speed connection ]
Part 2 - if it is possible that after Reinstalling windows i can boot into ubuntu that is previously installed via Wubi on different drive that please tell me, how could i do that. ****if it is not possible than please show me the way to do backup all the data,software,plugin that is downloaded.etc. I need to back up the whole Ubuntu because after installing windows i am goin 2 format the ubuntu drive and make it to Ext4 that is currently NTFS and then i will install the Fresh 9.10 on that.
View 1 Replies
View Related
Mar 13, 2009
I'm trying to reinstall FC10 after a foolish mistake I've done that costed me operation of my Fedora partition (uninstalling SELinuxpolicycoreutils).
I have a dual boot Ubuntu - FC 10 machine and delete my old fedora partition with GParted. However when I try to install FC 10 from the live CD using the option "Use free space on selected drives and create default layout" I get the error message:
Could not allocate requested partitions:
Partitioning failed:
The following errors occurred with your partitioning:
You have not defined a root partition (/), which is required for installation of Fedora to continue.
This can happen if there is not enough space on your hard drive(s) for the installation.
Press 'OK' to choose a different partitioning option.
This is the output of fdisk -l :
Partition table entries are not in disk order
My last option is erase everything from my drive including the Ubuntu partition and start over the installation, something that I would like to avoid.
View 2 Replies
View Related
Oct 4, 2010
can I reinstall one os without overwriting the other?
View 2 Replies
View Related
Jul 25, 2010
I'm having some trouble installing Xubuntu on an old Compaq PC with 512 MB RAM. The Live CD installs without a hitch, but when I restart the system to boot from the hard drive it locks up just after POST
View 1 Replies
View Related
Nov 17, 2010
i installed Xubuntu on my system having a dual boot with Xubuntu and windows xp but when i select to boot on Xubuntu it freezes and gets a message saying that the file hal.dll in system32 cant be found. Before showing me this message i tryed to uninstall the Xubuntu inside from windows xp because several problems showed up after installing Xubuntu. I can boot on windows xp but i cant boot to xubuntu and cant uninstall xubuntu.
View 1 Replies
View Related
Feb 20, 2010
The harddrive of an old laptop of mine recently died. Until I can replace it, I would like to use the xubuntu live-cd. However I would also like to be able to install some additional packages and change some settings, so it would be great if I could make it persistent. I know that it's possible to install to an usb-pendrive, but the problem is that the laptop isn't able to boot from usb-devices.
Is it possible to install xubuntu to usb, but boot the system wiith the live-cd? Or is there another way to use an usb-pendrive to keep some settings/packages?
View 2 Replies
View Related
Jun 25, 2011
got a bit of a strange and probably difficult issue. I recently repaired a friends pc (WinXP) and felt inspired to tinker with my old 98 system. First I'm trying to find out how to dual boot Win98se with any distro of Ubuntu.
The system's sprecs are:
Gigabyte GA-7IX f4a motherboard
AMD slot A 900Mhz thunderbird
384MB ram (3x 128MB)
[Code]...
I was able to get xubuntu 6.06 to run and even installed, but can't figure out how to dual boot. I would prefer 8.04 or later since I am more familiar with those ones.
View 3 Replies
View Related
Nov 27, 2010
I had Windows XP Pro 32 bit and CentOS 5.4 installed on my Dell M6400 laptop and life was wonderful. Until I had to reinstall Windows. In the process, I reformated the C: partition of the drive where the Windows operating system was installed. I was careful NOT to reformat anything else. Now I cannot boot CentOS. The drive that has both the Windows and CentOS still shows the same partitions as were there before I reinstalled Windows, namely:
NTFS (C:) 171.82 GB
/boot 102 MB
(F:) 60.96 GB
is where my CentOS partition has all of my linux data and apps. I assume /boot should be the boot partition for CentOS I use Acronis OS Selector to show the partitions to boot. Now CentOS doesn't show as an option even if I go through the process of trying to detect a CentOS boot partition using OS Selector. I have researched this in the forums but have not found anything that was of help. There was a thread from someone who had trouble booting Ubuntu on a system with Windows Vista and CentOS but I did not see anything there that looked like it would help in my situation.
View 3 Replies
View Related
Jan 12, 2010
I was thinking of creating an extremely minimal version of Xubuntu using XFCE. I have a Dell Mini 9, a netbook that uses a wireless-g card requiring bcmwl-kernel-source to work.What I would like to do is use either the alternate CD or mini.iso minimal install file to perform a command line install-style installation of the system.So far, what I am thinking (from reading this [url].... article:
HTML Code:
http:[url].....is to start off with these packages to begin with:
xorg
slim (if possible with 9.10, unsure if it is still available. in short, i want to use a lightweight display manager)
xfce4
xfce4-goodies
xubuntu-default-settings
bcmwl-kernel-source
aptitude
My opening questions are: Should I go with mini.iso or the Xubuntu Alternate Install CD (or the Ubuntu one)? If so, which one? What additional packages will I need to make the hardware accessible and fully functional? All I can think of so far would be sound (I'd like to stay away from PulseAudio if possible, it wreaks havoc with my computer), my webcam, and the memory card slot, if additional packages are needed for it?What other "core" packages should I include in this list? Should I include Synaptic, or other packages, and why?What do I need to take into consideration, since this is both a directly- and battery-powered computer?
HTML Code:
http://ubuntuforums.org/showthread.php?t=1155961
post regarding a "Ubuntu-Desktop-Minimal"-type system.
View 5 Replies
View Related
Jan 23, 2010
I currently dual boot windows XP Pro with Ubuntu 9.10. I made a mistake last night playing with gparted and lost my E drive, which had all of my music, games and movies plus is where my Ubuntu install was. I then ended up reformatting the drive with windows and reinstalling Ubuntu 9.10.My question is how can I put my windows files on my E drive without going through the hassle of reinstalling windows.
I have a 20g IDE drive where my windows install is, windows and Ubuntu both tell me this drive is failing, (I have used it for booting since 2002, so I am not that concerned with it), another 40g IDE drive for more storage and a 160g SATA drive where Ubuntu is again installed. I want the SATA drive to be my main boot drive now, so how can I clone my windows boot to the other drive. I tried gparted but could not figure it out. I have gparted burnt to cd, booted with it and just don't understand how to use it.Also, if I clone this boot drive to the SATA drive, do I need to change jumper settings on my 40g to master when I take out the 20g drive.20g master and 40g slave on first IDE channel and 2 CD devices on second IDE channel and SATA drive on first SATA connection. I read somewhere that it is better to keep the cd devices on another channel than the disk drives.
View 1 Replies
View Related
Mar 31, 2010
I have a Dual Boot system set up that i need to be able to deploy to a dozen identical computers in a lab envrionment. from a linux server. In order to do this i will need to be able to clone the MBR, Partition Table, and all the data.
View 1 Replies
View Related
May 23, 2010
I can't get Ubuntu 10.04 to boot for install (to my desktop), it displays the logo then hangs for about a minute and displays the alert dialouge saying "Boot disk error."I've tried multiple CD-Rom drives, burned from multiple computers, with both the desktop and server downloads. I'm down about 10 CDs and 2 DVDs here I've checked their integrity (md5) as well as checked the disk integrity from another computer (laptop) and everything passed. I got xUbuntu to install effortlessly, so I don't know what's causing the problem for Ubuntu. I can even look at the contents of the Ubuntu Server CD from within xUbuntu -- so, I know the disk really should work.
My system specs are pretty basic:
2 x Xeon 2.0Ghz
Tyan S2720 Motherboard
2 Gig (4x512) ECC PC266 RAM
[code]....
why xUbuntu worked and regular Ubuntu won't, and/or maybe what I can do to fix this?
View 7 Replies
View Related
Sep 1, 2011
I just installed Xubuntu 11.04 via wubi. Whenever I would attempt to do a normal install, the graphics would seem to crash and the screen would become distorted and basically just blocks of black and white. So I tried to do it in graphics safe mode, which succeeded. However, now I cannot start the Xubuntu GUI, and I get the error message "Display not found".
View 1 Replies
View Related
Mar 25, 2011
I try to boot the live CD and try xubuntu without installing, and my computer just hangs at a black screen, cuts off, then goes black and repeats. I also tried just installing with nomodeset enabled and it seemed to install fine, but it did the same thing as it does with the live cd, GRUB wouldn't even load... the computers specs [URL]
View 3 Replies
View Related
Jan 22, 2010
I have an old laptop, and am a basic linux user, but this install is crazy. I know that I have to have acpi=off to work, and got Linux Mint 7 installed from the live cd but want Xubuntu. The Xubuntu 9.1 live CD works fine as long as I put the acpi=off parameters in the boot string, and I check the additional options just to be sure. But after install I cannot even get into the grub, it says grub loading for a split second then blinking cursor
View 2 Replies
View Related
Dec 18, 2010
I have freshly installed Xubuntu on my HP compaq nx9010 laptop and grub doesn't boot system. Only minimal BASH-like line scripting is supported. How can I fix it?
View 9 Replies
View Related
Feb 11, 2010
I have to reinstall windows on to my disk to run certain programs and I know I really have to uninstall ubuntu. Is there a way I can backup my whole ubuntu o/s or will it be easier for me to download a whole new disk from Net.
View 2 Replies
View Related
Apr 19, 2011
Currently running Ubuntu 10.10 off of hard drive. I want to install a second hard drive and install Vista onto that drive from backup discs. I know how to install the drives: what I need to know is what order (if any) to install second drive (master or slave) and then, after installing Vista on the new drive, to get GRUB to recognize it.
View 2 Replies
View Related
Feb 28, 2011
I am trying to recover Grub2 after reinstalling Windows 7 on my computer (which always takes over everything). I downloaded the Ubuntu 10.10 image from here and have mounted the image using the given instructions.
After restarting my computer, changing the boot order, etc., the computer reboots and hangs at "Verifying DMI Pool Data............" I have done everything correctly, so what exactly is causing this problem? Should I restore Grub2 in some different way, then?
View 2 Replies
View Related
