Ubuntu :: Grub Error 15 - Reinstalling WinXP - Umpteen Installations And It Keeps Crashing
Apr 8, 2010
My set up is internal hard drive Windows 7, external Ubuntu Karmic. The reason I have it this way, despite Linux being my main OS, is because my internal hard drive is 6 years old and half the capacity of my external new one. Have tried quite a few set ups with various Linux platforms, but have finally settled on above. As yet, I don't know Linux or Ubuntu all that well. Getting somewhere, but it's a steep learning curve.
Because of constant errors reinstalling WinXP - umpteen installations and it keeps crashing - the problems are with security updates and SP3 - I finally bit the bullet and intalled Win 7. I only need Windows for a few essential programs or I'd happily never look at it again, so it filled me with horror doing this, but I couldn't take the crashes any more. So, today, Win 7 installs just nicely. However, I can no longer boot my external Ubuntu hard drive. The error is, 'Grub loading stage 1.5... Grub loading please wait... Error 15'. I load up the live cd, but when I try to follow instructions given to other people with Error 15 (editing files, accessing root) I don't have permissions.
View 9 Replies
ADVERTISEMENT
Mar 19, 2011
I had Ubuntu 10.10 installed on an HP G72 laptop, and I wish to reinstall Win 7. I loaded from the recovery disks that I made before installing Ubuntu and all went fine. At the end, I need to restart. When restarting, I am getting the GRUB rescue prompt with "unknown filesystem." It surprises me that GRUB is still there. How can I get rid of it so I can boot windows?
View 1 Replies
View Related
Mar 27, 2010
I'm using the Live CD and have followed steps to recover grub2 after XP install. (damn Windows)!
Upon rebooting I get the grub> prompt with no where to go. Upon installing grub via the Live CD I get this:
Quote:
Update:
When I do this link, upon doing the
Quote:
I get this:
Quote:
View 1 Replies
View Related
Aug 21, 2010
I installed normally Ubuntu in my lenovo laptop, but GRUB shows two installations instead of one. Whatever happens to one of them, happens to the other, except some command-line work.
View 4 Replies
View Related
Apr 15, 2010
I need to add my windows installations to the grub menu.I have windows 7 and windows xp on hd0 and windows xp on hd1.Using 'sudo update-grub' doesn't seem to help.So how do i fix this?
View 6 Replies
View Related
Feb 28, 2011
I upgraded Ununtu from 10.04 to 10.10 Maverick and the Windows 7 partition disappeared from my grub menu. It used to work OK in Lucid.I have tried update-grub but it does not find the Windows install.
Code:
pete@pete-vaio:~$ sudo update-grub
Generating grub.cfg ...
[code]....
View 3 Replies
View Related
Mar 2, 2011
I try to install to my desktop as Squeeze/ISPConfig3 server, but GRUB does not load after several re-installations.
I have
- 6 x 500GB HDs
- ASYS A8N-SLI Bios SLI-RAID active as only then RAIDSata1-RAIDSata4 can be seen 2 x RAID1 (has to have something) and all drives can be seen by Debian-installer as individuals Same has been working with LinuxMint (both LM10 and LM Debian Edition) (with and w/o fake-RAID)
1st test: Guided partitioning (LVM) for one disk (where /boot will be separated) => Installation OK and starting.
[Code]....
View 9 Replies
View Related
Jan 11, 2010
I had 9.04, then upgraded to 9.10. After screwing it up, it won't boot. Is it possible to just reinstall Ubuntu using the CD? Cause then I would get GRUB 2. I installed kde-desktop, then it failed to boot (I selected KDM) and that somehow screwed it up.
View 6 Replies
View Related
Apr 23, 2010
I wasn't thinking at the time, but after I installed Ubuntu 9.10, I installed Xp. Did it the wrong way around, is there anyway to get grub going again, without reinstalling Ubuntu?
View 2 Replies
View Related
Jan 3, 2010
I installed karmic to a flash drive, and grub overwrote my winxp mbr. On boot it has an error that grub can't load and then shows the grub rescue prompt. I've tried fixboot and fixmbr and bootcfg /rebuild from the repair console with no luck. Grub loads if I leave the flash drive in, but it takes a long time.
The boot_info script provided this data:
Code:
Boot Info Summary:
=> Grub 1.97 is installed in the MBR of /dev/sda and looks for
(UUID=18f3e5ee-7ef2-4158-8b84-853630827dea)/boot/grub.
=> No known boot loader is installed in the MBR of /dev/sdb
=> Syslinux is installed in the MBR of /dev/sdc .....
View 4 Replies
View Related
May 31, 2011
I have two HDD, one of 80 GB with Lubuntu and a broken windows, the other HDD is 160 GB with another Win Xp, but it seems its windows boot loader is broken or the windows boot loader was essentially on the 80 GB HDD and was replaced by GRUB. GRUB only detect the WinXp on the 80 GB HDD. How can I make GRUB detect winXp on the 160 GB HDD?
View 9 Replies
View Related
Apr 18, 2010
I recently had to reinstall Windows XP and as usual it destroyed my grub setup. I have done this before, so I simply booted from a live CD and typed this in the terminal:
Code:
sudo grub
> root (hd0,2)
> setup(hd0)
> quit
Now, the problem with it this time is that in the past in these situations I had only Ubuntu Feisty and Windows XP installed on my machine. But I have installed Ubuntu 9.04 on a separate partition (retaining the old 7.04 installation separately) since I last had to reinstall XP. Doing the above procedure restores my grub sttings to my pre-9.04 installation (i.e. I only get Ubuntu 7.04 and Windows XP in the grub menu).
View 9 Replies
View Related
Dec 13, 2010
Every other guide I've seen is confusing the heck outta me.
I had ubuntu, and no other OS, then I installed win7, and now I want GRUB to be my MBR.
View 1 Replies
View Related
Feb 21, 2011
I have triple boot machine Windows 7 + Ubuntu + Mac OS X in a single HDD.
Windows 7 -- /dev/sda1
Ubuntu 10.10 -- /dev/sda2 (In same Partition grub 2.0)
Mac Snow Leopard -- /dev/sda3
I have installed GRUB 2.0 in same partition where current ubuntu is installed ie /dev/sda2 and basically Windwos Boot manager is installed within MBR.. & I have added GRUB 2.0 and Mac OSX entry into windows boot manger with some freeware from windows 7. So practically when I start my computer First Windows Boot manager comes up and asks me which OS to start first. I set up this type of installation with the thought that when grub 2.0 is not installed within MBR, I can format the whole /dev/sda2 partition without any difficulty and reinstalled any future release distro of ubuntu. So is it practically possible? If I format /dev/sda2 and reinstall new ubuntu release there.. Old grub won't affect the installation of new one.
View 1 Replies
View Related
Jan 21, 2010
I want to make XP default and get that count down thing so while the countdown I can switch to ubuntu.
View 1 Replies
View Related
Jun 25, 2011
I installed Ubuntu 11.04 on my laptop alongside WinXP. For some reason Grub hides my CD drive from WinXP but not Ubuntu. I can access the drive in Ubuntu, but it doesn't appear in WinXP at all.
I know there is a solution to this, but I can't remember what it is. Something to do with modifying grub.conf or something like that.
View 9 Replies
View Related
Feb 11, 2011
I am trying to install vodafone mobile connect 2.10 (noarch.rpm) but keep getting a python = 2.6 is needed by python-sq*. I had Python 2.6 installed and upgraded to 2.6.6, but still got the error. What could I be doing wrong or what repositories are short on my openSuse 11.0 to have the installation work. I downloaded the correct version of vodafone for my system.
View 1 Replies
View Related
Jan 15, 2011
I previously had a single 160gb drive with two partitions, dual booted for Ubuntu and XP. I then installed a new SSD drive and put Windows 7 on it and of course I lost grub on the MBR. I have gone through this before so I went ahead and booted the livd CD, installed grub then ran
root (hd0,1)
setup (hd0)
but then got these errors;
Error 22: No such partition
grub> setup (hd0)
setup (hd0)
Checking if "/boot/grub/stage1" exists... yes
Checking if "/boot/grub/stage2" exists... yes
[Code]....
View 9 Replies
View Related
Jan 6, 2010
I have been a happy little GRUB user for a while now, but now I want to use GRUB to boot a physically separate WinXP hard drive, and I can't seem to do that. Normally GRUB is easy, (I even have a nice splash screen of my own making). Its a champion solution for booting into Ubuntu Linux on /dev/sda5 or Win XP on /dev/sda1.
My second HD which Linux recognizes as /dev/sdb, has a Win XP boot sector and Win XP in one partition.
Normally I boot off /dev/sda using GRUB, and from Linux I can mount and have access to /dev/sdb - that works well. Occasionally however, I need to boot the separate Win XP system on the second HD, and to do that I switch the boot drive in the BIOS, but lately that is getting to be a bit tedious.
Initially I though to give the additional boot choice to GRUB, I simply had to edit /boot/grub/menu.lst and point to the second HD (where /dev/sdb = hd1 in GRUB speak). Unfortunately, when I select the new choice, it simply boots Win XP off the first HD.
I'm confident GRUB does look at the first partion on hd1 as expected as I can induce an error by having hd1 disconnected, or write silly partion numbers into menu.lst. So if it does in fact find the first partion on hd1, why doesn't it boot? Why does it default to WinXP on hd0?
I have diligently tried physically swapping SATA drive cables and playing with bios switching and have messed about a fair bit with menu.lst to make sure I have drive and partition numbers right, but all to no avail. I have also tried changing rdisk(0) in boot.ini to rdisk(1) on the second drive when it is not the boot drive.
I'm afraid the only other thing I can think of is that the second hard drive requires a Linux boot sector if I am going to boot it up from GRUB, but somehow that doesn't make sense. Surely GRUB can work across physically separate drives, so I'm open to other ideas first.
View 5 Replies
View Related
Jun 25, 2010
Here's today's problem: I upgraded to Ubuntu 10.04 and hope to have it run alongside Win XP PRO, which it had for months.
Only, when I select WinXP in GRUB, nothing happens. Oh the screen goes dark for a few seconds, but then the GRUB screen reappears. Ubuntu 10.04 functions correctly.
here are the contents of what I assume is grub.cfg code...
What I need to know is how to make GRUB load WinXP.
View 9 Replies
View Related
Nov 3, 2010
I have Win7 installed in my notebook, after I install WinXP, after I install Ubuntu 10.10
I need WinXP to my project...
I re-install Grub2 with live CD and the WinXP doesn't show up...
So I re-install WinXP... Re-install Grub2 and WinXP doesn't show up again...
So I custumise Grub2 and I put one line for WinXP (doesn't work)
But Now, Win7 line in Grub2 boot WinXP
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in partition #6 for (,msdos6)/boot/grub.
[Code].....
View 5 Replies
View Related
Mar 8, 2011
I've got an old Dell Precision 670 which has a SCSI disk. I installed 10.04 and everything worked fine - I could boot into 10.04 from the GRUB menu. I later added an IDE disk and installed WinXP Pro on it.
When I ran 'sudo update-grub', Lucid discovered the IDE disk and added a WinXP Pro entry to the GRUB menu. Now, though I can still boot 10.04 from the GRUB menu, I can't boot WinXP - the screen goes blank, and I have to hit Ctrl-Alt-Del to restart.
For what it's worth, here are the results of using boot_info_script055.sh:
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Windows is installed in the MBR of /dev/sda
=> Grub 2 is installed in the MBR of /dev/sdb and looks on the same drive in
partition #1 for /boot/grub.
[Code]....
View 3 Replies
View Related
Feb 19, 2015
I have a virtual Linux server and i deleted his boot partition by mistake. Now When i try to enter the machine I see
Code:
Select allfilesystem unknown
Grub rescue >
I was told i need to reinstall the server so I've downloaded the ISO files i need.
I've connected the ISO to the machine but i don't know what yo do next.
I've read online that i need to do ls and find where the ISO is so i can boot from it.
But i get error unknown filesystem for everything so i don't know what to do?
View 1 Replies
View Related
Aug 4, 2010
My Windows installation had a problem and I had to reinstall Windows. The problem now is that I need to get grub back so that I can boot into Fedora. I'm using a Fedora 11 LiveCD I had sitting around. Here are the results of the command most of the way down the first page:
Quote:
Disk /dev/sda: 250.0 GB, 250059350016 bytes
240 heads, 63 sectors/track, 32301 cylinders
Units = cylinders of 15120 * 512 = 7741440 bytes
Disk identifier: 0x000f09ab
[Code].....
I'm tempted to try the grub-install command quoted near the end of the thread, but I don't want to do anything that will hose the system.
View 14 Replies
View Related
Nov 5, 2009
I have 2 drives, the first has Slackware 13.0 and FreeBSD 7.2. The second has Windows 7. Lilo configured to boot all three, no issues. Perfect. The first drive has 100GB of free space after FreeBSD and today I decided to install Open Solaris on that free space. The install failed, as in Solaris displayed such a message. I did read the Solaris install docs, etc. And it did mention no to install unless it preceded any Linux Swap partitions. There are, I did, but that's not my issue now.
After rebooting, it amazingly loaded FreeBSD by default. No Slackware. So I booted the slackware DVD, ran fdisk and made Slackware the default boot partition, yada yada. Now when it rebooted it gave a little message down in the left hand corner of the screen like "RRG B" highlighted in a red box. Now pressing enter will cause Windows 7 to boot from the second disk. I mounted the slackware partition from the DVD and am there now. Will just running lilo again put everything back to normal? Apparently Solaris left behind a piece of that ill behaved GRUB! (No flames!!!) :-) How do I make it go away?
View 2 Replies
View Related
Jan 6, 2011
early tl;dr: The fancy grub breaks on my wubi 10.04 install, can I force it to use the old grub?
When I rebuild grub.cfg (last time was yesterday for kernel update to .37), and shut down / reboot, grub breaks because it can't 'loadfont' and a few other errors which are related to the 'graphical' grub boot menu.
To fix this I have to boot into a live CD (also Ubuntu 10.04) and run the following:
Taken from [URL]
Code:
sudo fdisk -l
sudo mkdir /win
sudo mount /dev/sda1 /win
sudo mkdir /vdisk
sudo mount -o loop /win/ubuntu/disks/root.disk /vdisk
[Code]....
I know how to fix it but is there a way to skip having to do this on upgrades
(If I edit the grub.cfg before shutting down then this doesn't happen, obviously, but sometimes I forget and this is the result. I'd rather stop the problem at it's source than fight against the updater).
View 1 Replies
View Related
Mar 12, 2011
I have WinXP, Ubuntu 10.04 and Debian 6.0 installed on my Desktop.
After installing my latest distro, Debian 6.0 WinXP disappeared from my GRUB menu!
Relevant details are:
root@debian-peter:~# fdisk -l Code: Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
[Code].....
View 9 Replies
View Related
Oct 29, 2009
I am running fedora 11 and I am configuring my menu.ist file. I attached the menu.ist file in txt extension. What I want is:
1- I want the first option to be Windows XP (which is on the second HD) and I want the text to be Windows XP instead of Other. This option should be the default (so if I didn't press anything it will boot from xp).
2- To remove the 2.6.29.4-167.fc11.i686.PAE kernel from the list and keep the 2.6.30.5-43.fc11.i586.img available as a second option.
3- Increase the countdown time to 10 seconds.
View 13 Replies
View Related
Jan 29, 2011
I've been trying to setup some installation partitions made with Debian and Windows Installation CDs/Images and everything works well with the Debian, but not Windows. This is a similar setup as some Laptop companies do by putting a hidden "recovery" partition.How do I get grub to boot say WinXp/Win9x or what have you?Is there a better alternative?
View 6 Replies
View Related
Apr 12, 2011
Currently I installed Windows Starter, then installed Fedora 15 Alpha from the 'Fedora 15 LiveCD'.Now, I have reinstalled Windows Starter and now my grub loader has been removed.How can I get the grub loader back, with just the LiveCD?Is it possible to do this without the LiveCD?
View 2 Replies
View Related
