i have installed ubuntu 9.10 inside windows vista.now when i start my system i get option to select windows or ubuntu. windows can start successfully but ubuntu start up fails and give grub shell prompt as :
[Code]...
I've installed Ubuntu on my new desktop alongside Windows 7 (each OS is on a separate drive), I seem to have run into a small problem. Let me start with what I did:
- Unplugged 1TB drive from the PSU, BIOS was not seeing my formatted (and thus empty) 500GB drive and I couldn't put it into the boot order at all with the 1TB turned on.
- Loaded up the boot CD and was able to install Ubuntu 10.1 on my 500GB drive.
- Did a bit of configuring, shut my PC off and plugged my 1TB (with Windows 7) drive back in. I tried to see if I could now see my Ubuntu drive in BIOS but nothing is there - just the Windows drive is in the list of available drives to boot from (along with DVD-ROM and USB).
This is where I've run into my problem. What I want is to have a nice GRUB boot menu at the start like any other dual-boot system but just have the two operating systems on separate drives altogether.I did it this way because I was having issues with the advanced partition menu on the boot CD so just went ahead and followed the KISS method by unplugging the Windows drive.
I was told by a friend that if I put my Ubuntu drive into the first position in my boot order and the Windows drive in the second, then I could boot into Ubuntu and run a GRUB update command (he told me to google it) and that would create the necessary GRUB that had the entries for Windows 7 and Ubuntu.Both operating systems are 64-bit, I imagine that might make a difference in whatever help you guys can offer me. I love the hell out of both OS's and want to be able to use them interchangeably.
I have Fedora 13 and XP installed on my laptop. Right now it only boots to XP but I have a Fedora Live CD so is there some way I can use the live cd to boot into Fedora and edit or install grub to show up at boot?
View 1 Replies View RelatedMy computer has become quite strange the last days, last week grub stopped working and just halted at the grub prompt.
I can manually start the system by writing
insmod /boot/grub/linux.mod
linux /vmlinuz root=/dev/sda1 ro
initrd /initrd.img
boot
[Code].....
Note:
The system is a Ubuntu 10.04 based system on a old HP laptop.
Related questions:
grub2 error: out of disk
So my computer has ubuntu 9.10 installed 1st and I want to install win 7 in a separate partition. Basically, ubuntu 1st, win 7 later so far from what I learned from search results, grub 2 have problem with win 7 installed later and what was recommended was install win 7 before ubuntu. how ever I do not have the time to start over again because there are too many things to back up or install again. can I simply revert grub 2 to grub 1 again and resolve the problem?
View 7 Replies View RelatedRight, so I've looked high and low for the answer to this problem and haven't found it, although I've found a million and a half threads about grub especially when it comes to dual booting windows. Which I'm not. What I am though, I suspect, is an idiot who shouldn't mess around with my computer at 4 am.
So the problem is every time I turn on my pc, grub tells me it can't find a file system and goes into recovery mode. Can't boot into ubuntu at all. Am using the live disk to type this.
I also think I know why grub is doing this, I was dual booting windows before, I had windows installed originally, added ubuntu to a new partition. Was having problems with grub. Figured that reinstalling it wouldn't be a bad idea, it might fix it. In that process I did something rather stupid, I accidentally installed grub to my other internal hard drive. There is no operating system on it. Just movies, music, etc. The problem, I think, is that my second hard drive is sda, and the one with my os is sdb, which I suspect means that grub is loading from sda and finding no operating system, rather than from sdb. (It's like that because my larger drive wouldn't fit into the sda slot on my computer, long story.) How do I remove grub from sda?
I'm trying to dual boot Win7 and Ubuntu WITHOUT using Grub. This is to support Bitlocker encryption.
I followed this guide, and now when I select Ubuntu I get a Grub> prompt and no ubuntu.
I feel like I'm halfway there, I just need to get Grub to load correctly or something.
i am having a problem with my dual boot setup. I originally installed windows XP on a 100gb hard drive, from there i downloaded and burnt ubuntu off so i could install it on my 200gb hard drive. For a little bit i struggled to even get it to install because it wouldn't recognize my onboard nvidia graphics, i ended up having to get an alt boot disk and fix it with technique in this link:
[URL]
Now after the bios boot, my screen shuts off for awhile and takes me directly to the login screen for ubuntu. No Grub, no windows boot options, nothing. I tried booting windows by choosing it from the bios boot menu but all it does is hang at prompt and doesn't boot at all. I tried the live cd fix and reinstalled grub but nothing changed. What i think is happening is that it boots the Grub menu but it doesn't display it because of graphical confrontations. It hangs for about 10 seconds, the grub default time, and then turns my monitor back on to display the Ubuntu login screen.
I followed a tutorial to install XP across my entire HDD. I installed Ubuntu 10.10 "Alongside another OS". Ubuntu loads fine, but when trying to load XP, the boot screen shows up, but then the computer restarts and returns to the GRUB menu.
I saw some threads on this site and tried to type: sudo gedit /boot/grub/menu.lst
In the terminal. It returned a blank text document so I'm not sure if that information was outdated. I then typed: sudo fdisk -l
And got this:
Not sure what any of this means, but I sure hope someone else does. I would say forget XP, but it's hard to let go of some of the games and software I use. I appreciate any responses, thank you.
I tried to format the table as it appeared, but the forum corrected the extra spaces.
I had a dual boot system with 3 partitions, Windows 7 on one partition, and Windows XP on another partition and a Data partition. I decided to load Ubuntu 10.10 on the Windows XP partition.During installation I selection manual partition, and deleted Windows XP.after successful completion of Ubuntu installation "Grub" directly boots into Ubuntu, it doesn't show me the OS selection screen. After following some forum posts I did an update grub
Code:
Generating grub.cfg ...
Found linux image: /boot/vmlinuz-2.6.35-22-generic
Found initrd image: /boot/initrd.img-2.6.35-22-generic
[code]....
I updated from Ubuntu 9.10 to 10.04 via Ubuntu updater. Worked nicely. Until I had to use Win 7 for a moment, so I went to the Grub boot menu and picked Win 7. Nothing is happening. Just a black screen with blinking underscore to the top left corner. I never had this problem with 9.10, so I am confused. I tried looking around and nothing helped. Be noted that I am an amateur with Ubuntu coding and installing. I did hear that this is already a common issue now.
View 6 Replies View RelatedI have installed ddclient for use with dyndns.org.
I can manually run it from the prompt with /etc/rc.d/init.d/ddclient start
and can verify that it works by checking that my IP has succesfully been changed at dyndns.
When I reboot though, during the startup, I get the following:
Starting ddclient: /bin/bash: ddclient: command not found [FAILED]
I am very new to Linux, so I am not sure what or where I should be looking to solve the problem. It seems to me that it must be looking in the wrong spot for ddclient, but I don't know what to check or change to point it at the right place.
HW config is: AMD Athlon 64 X2 5000+ Black Edition, MSI 785GTM-E45, 2X 1Gb Kingston HyperX PC2-8500. I have set up GRUB to dualboot openSUSE 11.2 and WindowsXP. Initially i had set up system with defaults: CPU@2600MHz (200X13) and therefore RAM@800MHz. Both openSUSE 11.2 and WindowsXP worked just fine. Memtest86 found no problems.
But after a while i decided to change this setup to: CPU@2500MHz (250X10) and therefore RAM@1000MHz, as it promised better overall performance. And now Windows still boots and works better then before. Memtest86 still can't find any problem. But openSUSE 11.2 hangs at boot. I've suspected cpufreq governor, but changing from Ondemand to Conservative in /sys/devices/system/cpu/cpu0/cpufreq doesn't help.
I am inexperienced in using Linux, and just installed Ubuntu 10.10 on an external hard drive. I didn't want to mess around with re-partitioning my hard drive, which has Windows 7. I figured that I could just run Ubuntu from the external, and if it gave me any problems with Windows, which I unfortunately need for work, I could just unplug it and boot normally. However, GRUB appears to have installed some component to the local hard drive. Whenever I try to boot from the local hard drive, I get this error message:
"error: no such device: 8b84f351-7770-4908-b12f-0cbd31bc3662
grub rescue> "
Another thing is that in the boot menu, only the CD/DVD drive and local hard drive are options, it won't even register the external.
Any suggestions on what may have caused this error? I saw from other posts that GRUB doesn't like multi-drive systems. Also, would it be possible to delete GRUB from my system, then allowing Window's MBR to take over?
I installed Ubuntu on my netbook alonside xp. The only problem is that when I start my computer, the boot menu only pops up for a split second and I cannot select "run windows xp". This is preventing me from usintg both OS'.
View 2 Replies View Relatedi installed Ubuntu on another partition from windows 7. but before doing that i remember formating 100MB partition i think was called Boot "something" thinking that i created this partition from my previous failures for installing Ubuntu, now every time i restart the computer; i doesn't ask me about what to start! it starts Ubuntu immediately! "i even remember before installing Ubuntu; i couldn't start windows!"
View 3 Replies View RelatedI have installed Ubuntu 10.04 LTS-the Lucid Lynx on top of a Windows XP installation. The Windows partition started before I did this. Now, all I get is a flashing cursor when I tell GRUB to start the Windows XP partition.
I have tried reinstalling Ubuntu with no effect. I have tried repairing Windows using a Windows installation disk.
However, I can reach the files in the Windows partition just fine from Ubuntu.
This is the third time I try unsuccessfully to install Debian as a second OS on a hard drive. When it gets to the end of the installation process the installer asks whether I want to go ahead with the Grub Boot Loader, I choose yes. The end result is however that I can't boot that partition within the hard drive -- i.e., Debian. Can someone tell me what is going on? Should I not use the Grub Boot Loader when I have more than one operating system on a machine? Should I not install Grub on the Master Boot Record (MBR)?
View 3 Replies View RelatedI just set up a dual boot on a system with fedora 12 and XP. XP in on one hard drive (sda) and Fedora on a second hard drive (sdb).
I installed grub on the Fedora disk so as to not touch the windows disk at all.
Prior to installation, in the bios, I set the Fedora disk (sdb) first in the boot sequence, and then XP (sda) so that the grub loader would boot up by default. (If I set the windows drive first then the system bypasses grub and loads straight into windows.)
My system can now boot up into Fedora fine, but if I select windows from the grub loader menu I just get a blinking cursor - windows will not boot.What do I have to do so that grub can boot into XP?
I'm completely stumped by a problem with httpd in Fedora 13. It fails to start on boot: I can see: Starting htpd: FAILED, in /var/log/boot.log, but I can't find anything else in messages, audit.log or anywhere else that gives me any clue why. The weird thing is that running:
run_init service httpd start
after boot _works_ and the server runs fine, but even when it's running OK,
service httpd status
reports
httpd dead but subsys locked
I'm guessing that the problem somehow relates to selinux, but I can't find anything in the audit logs that gives me a clue. How to turn on more logging so that I can get closer to the problem. I finally discovered the cause. This system was originally configured to use network services directly, without NetworkManager. It had been upgraded a number of times since installation. It seems that over time, if you have turned off NetworkManager, the defaults have changed. Used to be that the network services was 'enabled' by default (hence started at run time). Now, the default is 'disabled'. Httpd couldn't start because there was no network to start on. Enabling network services at boot time fixed this. I guess I should have noticed this. But one might think that httpd failing to start because of the lack of a network might at least give a warning message in the logs about the reason.
Made a persistent 10.10 usb to try out une - loved it, great job. Decided to install it together with the Windows7 already on my laptop. Did the standard installation - went well. Restarted without the persistent usb. And what starts up - Windows7. I was expecting the old menu (ala 9.10) which allowed me to choose whether I start W7 or Ubuntu. So can somebody please tell me how I get Ubuntu to start from disc and how I get to choose which os starts up. Surely Canonical's preference is not that I use W7?
View 6 Replies View Relatedhave just installed Ubuntu alongside Windows 7. I just went along with the manual set-up all through the install. I was expecting to see an obvious option on starting up my computer as to whether to run Ubuntu or Windows but it just goes right ahead and runs windows exactly as it did before the install.
View 5 Replies View RelatedI installed karmic, then damn small linux - the DSL's loader would not recognize my xubntu automatically, so I got GRUB 1.97 on xubuntu and it recognized my DSL and added it to the menu with 3 alternative resolution options.
Now, xubuntu starts fine, but when I start DSL in any of the modes, I get the following output:
1. 'vga=normal is deprecated use gfxpayload=text before linux command' comes up in the same font as GRUB menu is displayed - but only for a split second, I had to video it to read it!
2. Uncompressing linux... ok, booting the kernel - similarly, disappears before you can read it, and the computer reboots.
Below are my /etc/default/grub and /boot/grub/grub.cfg.
Does all that mean I want to edit /boot/grub/grub.cfg even though I apparently must not?
NB I have some problems with my hard drive, I have to fdisk it a lot but that's probably because my laptop has a dead BIOS battery - I'm having to fdisk it every time I boot up etc. I'm a bit lost with this to be honest! Anyway, please forget the hard drive note unless you seriously suspect it's at fault for GRUB problems.
Code:
Code:
I'm using the RAID1 setup, which is configured in the BIOS, as it is a HP Proliant server. i have 2 500GB hard drives configured in a mirror. when booting the install, it recognises this, and deals with it fine.
The problem is, when it gets to the section of installing the grub2 boot loader, it just stops and gives me the "ubuntu installer main menu" where if i select grub boot loader install it just loops back, and if i select LILO installer, it errors, saying an installation step failed.
It has the option to skip installing boot loader, but then, can i get it to boot a different way? can i boot manually into the server install and then install GRUB and hope it works? can i install grub1 rather than grub2?
I am a complete noob at this and I need a hand. I was about to throw my computer out of the window when I decided to throw the windows out of the computer so to speak. So, I downloaded Ubuntu 10.10 and tried to install. I had a grub rescue after the installation (file system unknown), which I have seen discussed here. Being the noob that I am I decided to try 10.04 because it said it had full support. With this install I get a similar error during installation: grub cannot be installed in boot sector.
So, basically there is an issue with grub and the boot sector. I checked in my BIOS options to see if there was an option that prevented the writing of a boot sector or something, but I have not been able something like that. So, I am wondering if it is possible that Ubuntu does not really erase/format the selected disks or something, leaving any difficulty there.
Does anybody know? Or better yet: what exactly do I need to do a manual grub install?
I have just recently installed firestarter to get an idea of iptables editing with a GUI. Firestarter works great and I love it, however when I turn my system on, and my system is booting up the terminal displays a "Failed" message when attempting to start up firestarter. Now I have been doing my homework (reserch) and have read that a user will get this error because firestarter trys to load prior to the network manager starting up. I have also read some other variables that can cause this is if you use network manager and have a password on your user account (which I do have) can cause this issue.
However in most cases from what I have read is even though it gives the user a "Failed" startup message, once the user logs in, and is connected to the internet firestarter will actually load the iptables. I did some tests and from what I understand I can see that this is true because I have allowed access to certain torrent trackers, and denied access to others, and I can see some come online. Does firestarter load iptables once the user logs in? Or once it fails to load, does it not load at all unless you manually open/load the application. If firestarter just modifies iptables, then once I save my listings in firestarter then I really don't need it to start up correct?
Arpwatch is failing to start at boot time. I got this message:
arpwatch: bad interface eth0: eth0: no ipv4 address assigned
Once I login into my account, I can (as root) run the arpwatch demon, but it is suppose to run at boot time. After I installed aprwatch, it was working correctly. I do not have an idea of what happens or since when the problem start to happen. I just realize, after a while , that arpwatch was not running. I am running Fedora 12 - 2.6.32.9-67.fc12
I have a ~ 2008 notebook (Compaq CQ60-137EL) on which I had Windows 7 only (it was sold with Windows Vista installed).
Later I installed Debian Jessie 8.2.0 Stable ("Graphical expert install" from DVD), along with GRUB as a boot manager (I chose not to install it on the EFI removable media path).
Since then, if I select Windows 7 on the GRUB boot screen, I see "Starting Windows...", and after few seconds the screen flashes for a moment, and then the PC reboots: I see the bios screen, followed by the GRUB screen again.
What's even more weird about this is the fact it just happens only in like ~50% of the cases. In the other 50%, Win7 starts flawlessy.
I even tried to install Debian first, then Windows 7, then re-install GRUB, but I got the same issue, even with both system freshly installed.
On 6 attempts, 3 times it worked and 3 times it didn't.
On my desktop PC I'm in the same setting, but I don't have this issue. I think it may be related with the fact I have Win7 on a SSD and I installed Debian on a separate HDD, while on my notebook, as you can imagine, there's just one single HDD.
I just upgraded to the new Ubuntu distribution. My GRUB looks the same and has an entry for WIndows7, however when I chose this option I just get a blank screen and it doesn't load Windows.
jcampos@linux:~$ sudo fdisk -l
[sudo] password for jcampos:
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[Code].....
I've recently installed Vmware on Vista and I am using that to run Linux. I prefer this method over duel booting as I can quickly switch between the two OSes. So here is what I would like to do.
1) Remove swap partition (not needed).
2) Remove Linux and format partition to NTFS for windows use.
3) Remove Grub.
What I don't want to do.
1) Reinstall Windows Vista (Lots of programs installed).