Ubuntu Installation :: GRUB Geom Error After 10.04 Upgrade / Resolve This?
May 22, 2010
I upgraded from 9.10 to 10.04. Previously, I had a dual booting system where GRUB allowed me to boot 9.10 or WinXP. I have two hard drives - an 80 GB drive with XP and a 1 TB drive with Ubuntu.
During the upgrade I chose to upgrade my GRUB version. I only selected to install grub on the Ubuntu drive. I didn't work - I couldn't even get GRUB to load. It just gave the error: the symbol 'grub_puts_' not found.
So I reconfigured GRUB and installed it on both drives. Now GRUB loads and I can boot 10.04 just fine, but I can no longer boot XP.
What command should I run to give you a glimpse of my system? Would that help diagnose this?
View 7 Replies
ADVERTISEMENT
Oct 13, 2010
Tried installing Linux (Red Hat 5) along with Windows 7. I created a new partition (10 GB in size) and used it for the Linux installation. After install, I was getting GRUB geom error and my system wasn't booting.
After a few tries I had to format my entire hard disk and run fixmbr which came up with the following warning message: A new MBR will be created and some of the partition may become inaccessible
Now, even though I have gotten back Windows, the Linux partition is not at all visible. (Seems like the warning message has become a reality as that partition looks like has become inaccessible.)
My new hard disk capacity has also reduced by 10 GB and it is not showing up using any software.
How can I recover that inaccessible partition?
I tried fdisk via Linux Rescue disk. Got an error 22, the details as follows:
No luck booting in Windows.
View 2 Replies
View Related
Apr 24, 2011
I just installed ubuntu on 60GB of unallocated space on my second drive and am now receiving a Goem error. Before, I was dual booting with two Windows 7 installations, using the second drive to store data and the second Windows 7 installation. I cannot boot into any of the operating systems.
View 1 Replies
View Related
Jun 20, 2010
I'm running Ubuntu 9.10 and did an upgrade yesterday via the Update Manager. Just installed all proposed upgrades. After rebooting, my newest kernel throws an error 16: inconsistent filesystem structure. When I select my previous kernel from the GRUB, no problems. How do I debug this error? Or better yet, how do I fix it?
View 3 Replies
View Related
Mar 21, 2010
I have tried to upgrade to 10.4 LTS it crashed I use dual booting whenever I try to start the computer it goes in to grub rescue > I have used wubi to install the dul booting, now I can not get into my window nor ubuntu. what can I do ?
View 2 Replies
View Related
Nov 17, 2010
yesterday i upgraded Ubuntu 10.04 to 10.10. During installation i also upgraded grub to version 2. It said that there were two options that i could choose to boot and i choose both. Installation finished with out a hitch. When i attempted restart my laptop i got this message:
error: no such device: 12631218-8ac6-4505-b4cb-a66a1de1814f
grub rescue>
I tried the command help and received a message saying that the help command was not recognized. So i then gave Google a bit of a work out and have tried reinstalling grub and manually coping the grub files all to no avail. The problem i believe stems from how i have Ubuntu installed. I have Ubuntu installed like an application on windows 7 on a separate partition on my hard drive. Looking back on it i'm not to sure why i choose that route, but that is how it is installed.
View 3 Replies
View Related
Dec 20, 2010
After one year of squeeze use without problem (and without upgrade) on a laptop and I decided to upgrade everything today. During the upgrade, I was asked what partition grub should handle. There was 2 choices /dev/sda and /dev/sda1. I checked only the last one and this is I think the source of my problem.
Now restarting the system, grub fails and reports
Entering rescue mode... error: the symbol `grub_xputs` not found and leave a useless prompt grub rescue>
I don't have a rescue cd at hand right now. I have a usb key with some old version of eeebuntu (my laptop is not a eeepc) and surprisingly I can boot on it.
View 6 Replies
View Related
Apr 11, 2011
My current setup was:
4 x 500 gb hard drives in (software / onboard controller) Raid 10 (1 +0) with Windows 7 x64 as the primary OS
1 500 gb hard drive with Ubuntu 10.10 installed
After upgrading to Ubuntu 11.04 Beta, I hit the Grub Error. I have removed the 5th HDD but still getting it on boot into Windows 7. I am currently in the process of copying all files from my raid via a 10.10 flash drive boot (fortunately was able to mount my raid's partitions).
View 3 Replies
View Related
May 2, 2011
I tried upgrading to 11.04 this morning and after rebooting grub left me at the grub rescue> prompt with the message 'error: unknown filesystem'. I've tried purging and reinstalling grub using a live-cd but no joy.
Let me know what additional information to provide. EDIT: Here is the output from the Boot Info Script
[Code]...
View 9 Replies
View Related
Apr 9, 2011
I attempted to upgrade from 10.04 to 10.10. Upon restarting, I was presented this message:
Code:
error: the symbol 'grub_xputs' not found.
grub rescue>
I poked around the forums and found several posts that would probably be helpful but... I am unable to boot from a USB nor can I burn a Live CD as my other computer is a netbook. I made USB first boot in BIOS, but no luck.
View 6 Replies
View Related
Apr 1, 2011
I'm currently running 11.3 and decided I'd try upgrading to 11.4 following the instructions here: SDB:System upgrade - openSUSEUnfortunately, my attempts are defeated at the point of trying to refresh the new repos; I get the following message (for the oss repo, in this case):
Download (curl) error for 'url':
Error code: Connection failed
Error message: Couldn't resolve host 'download.opensuse.org'
With 11.4 replaced by 11.3 in the repo url, it refreshes just fine. The only repository that works when I change 11.3 to 11.4 is the Packman repo. I'm not really sure why the connection fails for 11.4 but not 11.3!
Further info: I have an old router with no IPv6 support, but have IPv6 disabled system-wide. I can enter the url for the repositories into firefox and they come up just fine - it's only with zypper/YaST that I get the above error message.I also tried upgrading using the network CD but ran into the same sort of problem. In this case it may be because the CD installer doesn't disable IPv6. (I didn't want to download the DVD at my connection speed, and the KDE live CD is not listed as suitable for upgrade).
View 9 Replies
View Related
May 24, 2010
/dev/sda1 * 63 35166284 17583111 7 HPFS/NTFS
/dev/sda2 35166285 80228609 22531162+ 83 Linux
/dev/sda3 80228671 234440703 77106016+ 5 Extended
[code]....
View 3 Replies
View Related
May 3, 2010
The other evening I was in the lengthy process of upgrading from Ubuntu 9.10 to version 10.04. It had downloaded all the packages and was in the process of upgrading when a thunderstorm blew in. The power failed momentarily. The system crashed and the installation did not complete.
The system is dual boot to Windows XP. From GRUB when I try to boot Ubuntu the display goes dark, after a few seconds of the white Ubuntu logo. If I hit ENTER I get a flashing Cursor. I can boot to System Restore and get the Recovery Menu. I don't know if there is something I can do from there to repair/finish my upgrade, or even revert to version 9, when I could restart the upgrade.
Can I burn a Live CD for version 10.04 and finish the upgrade? This would salvage the settings, printer drivers, and other programs that I have installed. If I have to make a brand new installation I have to rebuild all of the things I spent many hours getting setup.
View 5 Replies
View Related
May 16, 2010
I am currently using Ubuntu 10.04 after kernel upgrade.
The pointer is visible at the login screen, but after I login, it disappears. Never had any problems with earlier distributions.
I was still able to figure out where it was because of the hover effects (you know, the brightness change of a button or link when you hover your mouse over it) and quicky changed the settings in System>Preferences>Mouse to show where the mouse is when I pressed ctl key.
I can get the cursor to be visible by sudo lshw -c display, but that is only temporary. If I reboot I have to do that again.
This is the information I get when I do lshw -c display code...
I'm running this on an old Dell Optiplex GX260 with onboard video.
Anybody have any ideas on how to make the pointer show up on a more permanent basis?
Also, it seems screensavers are giving me problems as well when they never used to. They just blank my screen and I have to reboot.
View 9 Replies
View Related
Nov 23, 2010
I have a dual boot system with ubuntu 9.10 x64 and Windows 7. Everything has been working fine for a a long time but yesterday I tried to delete an unused partition through the Disk Utility in ubuntu (System->Adminstration->Disk Utility) and everything was messed up. I used to get the "Grub error: Unknown filesystem". I managed to create an ubuntu bootable usb and followed some tutorials for fixing grub but all i managed to do is to get another error: "Grub error: No such disc". After some experimentation i got
"Grub stage 1.5" which gave me a grub> command prompt./dev/sda is the drive containing Windows and Ubuntu.
Code:
[ Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 0.97 is installed in the MBR of /dev/sda and looks on the same drive
in partition #6 for /boot/grub/stage2 and /boot/grub/menu.lst.
[code].....
View 5 Replies
View Related
May 31, 2010
I've just updated my desktop to F13 using preupgrade but now grub won't boot it. The upgrade seemed to go OK, and none of the disk partitions should have changed as far as I'm aware, but now I get an error
VFS: Cannot open root device "UUID=xxx" or unknown block(0,0).
View 1 Replies
View Related
May 12, 2011
I am trying to install ubuntu on my old laptops but dis message keep coming up on all code...
View 5 Replies
View Related
Jul 14, 2011
This morning it would not boot; when I tried to wake up the system, it gave me a bunch of errors, the last ones being as follows: "mount error: could not resolve address for servername: No address associated with hostname mountall: mount /media/shares [1402] terminated with status 1" I am writing this in Win 7 since I lost ubuntu. I am using ubuntu 11.04.
View 2 Replies
View Related
Oct 10, 2010
After upgrading to 10.10 (from 10.04) GRUB has started behaving very oddly. Sometime it work properly, just as usual, sometimes when I select a linux entry from the menu I get an error 16 or 18, sometimes I get an error 16 or 18 before getting to the grub menu, and sometimes the menu does not load at all, instead I am presented with a command prompt (i can then load the menu using the configfile command)
View 1 Replies
View Related
Jul 2, 2011
When i open update manager i get an error, i have attached the screenshot of the error.
View 4 Replies
View Related
Jul 12, 2010
I'm having a problem with this command: sudo yum update
I get the error: "Loaded plugins: presto refresh - packagekit
error:no such table: packages.
I created a group using vi /etc/sudoers
saved it using :wq!
but can't get it to work.
View 3 Replies
View Related
Feb 12, 2011
I keep getting the following msg as I try to upgrade from 10.04 -> 10.10 ... "Could not calculate the upgrade An unresolvable problem occurred while calculating the upgrade: E:Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages. This can be caused by:
* Upgrading to a pre-release version of Ubuntu
* Running the current pre-release version of Ubuntu
* Unofficial software packages not provided by Ubuntu
If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bug report." I don't think any of the issues above apply - can anyone offer advice on how to get around or "force " the upgrade
View 1 Replies
View Related
Dec 19, 2009
i get the following error when i try to install autoten: root@Tex dan]# rpm -Uvh [URL]... curl: (6) Couldn't resolve host 'dnmouse.org'
error: skipping [URL]... - transfer failed from reading other posts, it sounds like a dns error, but i don't know what to do to fix it.
View 14 Replies
View Related
Dec 16, 2010
I updated yesterday and now when I start my laptop it goes in to grub rescue mode. I have booted from a 'live cd' and thought I could repair grub from there. In gparted however the partition with ubuntu (sda1) is seen as unknown file system, in terminal when I list the partition table it shows up as FAT16 type. When I try a grub-install it gives this error message:
[Code]....
View 9 Replies
View Related
Mar 19, 2010
I have a Debian Lenny box with two hard drives in it (no dual boot; /home and /var are on the second drive). This machine was working fine until earlier this week when I ran an upgrade and restarted it. I think during this upgrade Grub got upgraded to Grub2, and now when I try to reboot I just get this:
Code:
GRUB Read Error
Hitting Enter yields Operating System Not found. This is it, I can't get into the grub screen to enter the boot command or anything. I booted the machine into the rescue environment on the Install CD, and was able to mount all the file systems and chroot in. I tried reinstalling grub2, but this did not help. I ran fsck on my /boot file system, but it appears fine. The boot partition is also marked with a bootable flag in fdisk. I did try to downgrade back to grub1.5 which, while it didn't given an error did hang shortly after it loaded.
View 4 Replies
View Related
Dec 30, 2010
I'm getting a bit tierd of linux right now.. I can't get the CD, with netinstall on, to start.
I've tried different harddrives and burned it several times at different speed and so on. I've tried to just i386 and amd64, both gives the same error:
isolinux: Disk error 32, AX = 42B0, driver 9F
The harddrives that I got is small 10-80 gb, so they are a bit old.. but they worked the last time I've tried to install (until I got a grub loading error)
I'm not sure what to do at all. Tried to search on google and here without finding something
View 4 Replies
View Related
Jun 30, 2011
I have a system running om vmware esxi with suse 9.3 i did an inplace upgrade to 10.2. i got the follwoing error during upgrade error occurred while installing grub (version 0.97) error 21 disk cannot be found. I ignore this error and the upgrade went fine. after a reboot the server works pretty fine. Except one thing GRUB.. i cannot install it on this system. i want to install grub on this system.
View 1 Replies
View Related
May 9, 2010
doing an upgrade from 10.4 to 10.4 LTS and got this error:
Could Not Calculate Upgrade
An unresolvable problem occurred while calculating the upgrade:The package 'skype' is marked for removal but it is in the removal blacklist.
This can be caused by:
* Upgrading to a pre-release version of Ubuntu
* Running the current pre-release version of Ubuntu
* Unofficial software packages not provided by Ubuntu
If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bug report.
View 3 Replies
View Related
Oct 10, 2010
I'm trying to update my Ubuntu 10.04 to 10.10... But I get this error message:pkgProblemResolver:Resolve generated breaks, this may be caused by held packages
I tried to disable all the repositories, and also "sudo apt-get -f"... But still having this error message...
View 8 Replies
View Related
Jul 10, 2010
I installed 10.04 clean on the PC.Not other operating system.It booted to Ubuntu fine after the install and all appeared to be working fine.Used the upgrade manager to install the upgrades to the basic system.I had not yet loaded in any non-ubuntu or medibuntu repositories so this was the first, basic upgrade.After the upgrade,I can no longer boot to Ubuntu but boot to a grub prompt instead.I presume this is a recover prompt. How do I "recover" and continue booting to Ubuntu?
View 8 Replies
View Related
