I have a dual boot (2 hard drive) system, and upgraded to 10.4. Booting into XP results in a flashing cursor that doesn't do anything. I know that GRUB screwed everything up, but I need to know what to do--and assume I don't know what I'm doing--to restore my dual boot ability.
Here's what I get after running a boot info script code...
I have a MSI a6000 Laptop (that has given me a lot of problems installing Ubuntu.
I finally had to run Ubuntu from a CD in nomodeset
Then when I go to install Ubuntu the only options it gives (regarding my harddrive) are to format my whole hardrive or do the partitioning. I have seen screenshots though where there is a third option on the same page to install ubuntu alongside a prior OS and dual boot.
Does anyone know why the "install alongside a prior OS (dual boot)" option doesn't show up?
I just recently upgraded my kubuntu install from karmic to lucid and now it takes about 10-15 minutes to boot. Directly after the upgrade it was pretty slow already, but it got worse every day from then. The karmic version was a wubi install I moved to a dedicated partition using lvpm. Here are the results from the bootinfoscript code...
View 9 Replies View RelatedMy first attempt at seeking help has not been very successful. Probably to much of a narrative. If you want to know How I got in this mess see my first post.
Machine: Asus Eee PC 1015
What I know: I can't boot into anything but Live USB
What I think: Win7 starter is still there
Mint9 is lurking as well
Vista recovery partition exists
What I don't have: External USB DVD or CD drive
Win7 Recovery
What I need code...
I've created my own wheezy live usb-hdd using:# lb config -a i386 --mode debian --distribution wheezy --linux-flavours 686 -b usb-hdd --bootloader syslinux --memtest none -p xfce
P: Considering defaults defined in /etc/live/build.conf
P: Creating config tree
# lb build
The binary.img was created.
Now if I try to boot from this image using qemu, I get a message "No bootable device"
If I check this main partition using gparted, the flag is "lba" instead of "boot".
Even doesn't work if try to change to "boot".
How to solve this problem?
I wanted to use Ubuntu on one of my old laptops (a great, speedy modern OS on a modest hardware PC). Unfortunately this PC can not at the time read all CD-ROM's (can't figure out why it does read some) and I've installed Ubuntu 7.10 - the only CD it did read at the time.
I've used it for two years but I never got my wireless card to work (OK, most of the time it was collecting dust) A couple of days ago I finally realized how to use ndiswrapper (lol...) and I was able to get a working Wi-Fi connection on this laptop. I then proceeded to upgrade it over the internet, to Ubuntu 8.04, then 8.10, then 9.04 and, last night, to 9.10.It has worked through each and every of these updates, but after 9.10 the PC won't even boot (after "GRUB loading...).
I have dual boot my Windows 7 PC with Ubuntu 10.10 recently. Ubuntu boots well until I upgraded the system with Upgrade Manager. Then all of a sudden it won't load anymore.
View 3 Replies View RelatedI installed Ubuntu 9.10 on Windows 7 system using Ubuntu disk partion option. Unbuntu works great but I can no longer access W7. Windows Loader Boot Option is in normal position as last selection of Grub menu but arrow keys do work. Acts as if keyboard is locked. System defaults to Ubuntu 9.10. How do I select Windows Loader Option
View 9 Replies View RelatedI am trying to upgrade to Ubuntu 10.04 and stumbled on a little problem. My partition scheme is as follows and I am installing Ubuntu on an External USB harddrive:
499 GB HARD DISK
WD My Passport 070B
MBR Partition table
49 MB Filesystem --/boot
Linux Ext4 (version1.0)
[Code]...
i was in ubuntu 10.04 and I thought geting the lastest version is the smart thing to do right? so i went to the update manager and upgraded it to 10.10. but now when i restart the computer all I get is " a black screen with white text that says "Gnu Grub Version 1.98+20100804-5ubuntu3Minimal bash - like editing is supported for the first blah blah, Tab lists possible command completions. Anywher else TAB lists possible device or file completions.grub> "I have a dual boot that has Windows 7 and Ubuntu, Ubuntu being my main OS, I really need to get back on it.
View 9 Replies View Relatedmy laptop's boot speed has been tremendously dropped (approximately from 30 secs to 3-4 minutes) after I've upgraded from 10.10 to 11.04.What do you recommend me to check in order to get back my lost time?
View 9 Replies View RelatedI had ubuntu 10.04 dual boot with win xp and I recently decided to upgrade windows to win 7. Once I did that I could no longer see the grub therefore I couldn't manage to boot into ubuntu. I don't know what to do, the installation is there because I never touched that partition
View 6 Replies View RelatedI've just upgraded my server installation from 9.04 to 9.10. I'm running this as a Xen virtual machine. All seemed to go well until I restarted, at which point I got stuck at this point:
Begin: Running /scripts/init-bottom ...
Done.
mountall:/proc: unable to mount: Device or resource busy
mountall:/proc/self/mountinfo: No such file or directory
[code]...
My service provider is running xen-shell 1.0.79 running on Xen version 3.0.3-1, and after the seemingly-successful do-release-upgrade, uname -r reports ubuntu kernal 2.6.18-5-xen-amd64. Unfortunately, this isn't mentioned as a possible problem here [URL]
I have a Core 2 Duo iMac that I had set up for triple boot using Fedora Core (probably FC8 )and GRUB, Windows XP Pro, and Mac OS X v10.5. Some time ago, I had to blow out and reinstall my Windows installation because it had developed errors, but this also blew out my GRUB, leaving the Fedora install non-bootable. Since I never really used FC on this machine much, I didn't worry.
Lately, I've acquired an hp Mini 110, on which I'm running Linux Mint 8 (Helena), and I'd like to upgrade my FC partition on the iMac to Karmic, but when I run the installer, it won't let me use all of the existing Linux partition, instead wanting to resize it to accommodate both FC and Ubuntu.
How do I make the installer simply replace FC with Karmic, using the entire existing partition? I'm sure earlier versions of Linux that I've used had a simple "erase all Linux partitions and install" option, and the "Manual" option doesn't appear to read the existing partition information (I was too afraid to go any further).
I ended up quitting the installer, which put me into the Live CD environment, where I used the File Browser to "Format..." the Linux partition, but when I went back to the installer, I ran into the same problem, and it didn't seem to matter if I unmounted the existing partitions or not.
I just upgraded to Ubuntu 10.04 from 9.10 and now my Windows XP will not boot from grub. It shows up on the grub boot list but when I select it, all I get is a black screen. It worked perfectly just minutes before the upgrade, but now I cannot use windows, which I need really badly at this point.
View 9 Replies View RelatedI've heard people have been finding that when they upgrade from 9.10 to 10.04 on a machine that dual boots 9.10 and windows 7, they can't boot windows 7 afterwards. There is a fix to this problem but I would rather prevention to a cure.
View 8 Replies View RelatedDual Boot Problem after Upgrading to 10.04.
View 1 Replies View RelatedI know this isnt normal for everyone but im getting a 29 to 30 second bootup on 10.04 from grub to login screen.. i installed boot up manager and disabled some of the things listed on a few recommendation pages on google where would i begin to figure this out? before i upgraded i was booting up at like 10 seconds tops..
View 1 Replies View RelatedI am new to Ubuntu. I recently upgraded my Ubuntu from 9.10 to 10.4 (64bit) since then I am unable to dual boot to WIN2K3 from the same HDD as my Ubuntu. I have ran some of the suggestions like: Sudo update grub and Testdisk both did not provide any errors on my partitions and my primary partition displayed in Testdisk was WIN2K3, now when I reboot and select it from the boot menu it just simply show a blinking cursor.
I am out of ideas and I need a solution to suit my configuration. I prefer not to re-install or repair any WIN2K3 OS. Can someone assist and let me know what you need from me to further understand my issue.
I had Ubuntu 9.10 and windows vista on my laptop and both systems boot normally throw grub but after I upgrade to Ubuntu 10.04 LTS windows is shown on the grub loader but if I selected it all I get is blinking cursor, Ubuntu boots just fine.
View 1 Replies View RelatedDuring upgrading from 8.04 to 10.04, I was asked several times what I wanted to do with menu.lst. I gave the same reply each time: "keep the local version currently installed". I wanted it the way I had when using 8.04; that is, not having the un-customizable grub menu I've experienced before with 10.04.
When I was done installing 10.04 and was going to reboot, the GRUB menu appears as it has before, and the Ubuntu entry says "Ubuntu 8.04", even though it's now 10.04. But when I choose "Ubuntu 8.04", the following error message occurs:
Code:
error sending message: Connection refused
udevadm[900] error sending message: Connection refused
udevadm[901] error sending message: Connection refused
udevadm[902] error sending message: Connection refused
error: unexpectedly disconnected from boot status daemon
[Code]...
First of all i would like to inform that I am new to Ubuntu. I had Ubuntu 9.04 install on my HP Pav. Laptop with Winxp. Before some days I upgraded it first to 9.10 and then to 10.04 as suggested in Ubuntu site. After the upgrade I found that the boot up is very slow. I heard and read that Ubuntu 10.04 has very fast booting but I don't experience that, though shutdown is faster.
I read many threads on this forum about slow booting and tried to resolve the issue using those, but nothing is working. I also installed bootchart and tried to get something out of it, but frankly saying I don't understand that chat . I have 1gb of ram.
I have attached the bootchart image. Please help to find the problem.
I am currently running Ubuntu Desktop 10.04 and windows xp in a dual-boot. I am looking to upgrade to windows 7 on the windows side soon but would rather not do a complete rebuild of the whole thing. The two are on separate hard drives so would i just install it on the Windows drive and then follow the instructions at [URL] or is there an easier way?
View 6 Replies View Relatedhow I can upgrade to the new version of Ubuntu on a dual-boot computer?
View 1 Replies View RelatedCurrently I have a 1TB drive that has Ubuntu installed and is used for all of my storage, vids music etc.After speaking with a friend he suggested I change the operating system to a smaller drive and use the 1TB for storage only. His reasoning for this is that the disc with the OS on it receives much heavier use so storage should be kept separate.If that's true I have a 250GB drive that I could use as the boot/OS drive.What I was considering doing was to make the 250GB drive the boot disc in BIOS, then install Ubuntu from the Live CD onto the 250GB. After doing that my plan was to use gparted to wipe the Ubuntu OS partition off the TB drive to leave it as a storage only drive.
View 9 Replies View RelatedI used a cd version of ubuntu 10.4 but my laptop wouldn't boot.I thought of installing the previous version of ubuntu and then upgrade it.I used ubuntu 9 and it worked perfectly. But when the upgrade finished and my pc restarted it showed this message [1.007098] Disabling IRQ#4
View 7 Replies View Relatedi had a dualboot configuration of win7 ubuntu 10 on separate partitions no wubi.my windows system is encrypted so i had truecrypts password prompt then an easybcd selection for windows and ubuntu.i have got a back up of the truecrypts bootloader "last bootloader" no file extention.but how can i reconfigure the system since after upgrading i can only boot in ubuntu.what software should i use.
View 2 Replies View RelatedI upgraded from grub to grub2 recently, and during an update of my system, it ran the update-grub command which prompted a window asking me where to install Grub. Since I didn't know what partition to install it to and the help suggested to install it to all if I was unsure what partition to install it to - I accidentally installed Grub to my Windows partitions (both the regular and the recovery console).
So now, I can't boot into Windows - the computer just hangs after Grub with a blinking cursor and I have to perform a hard reset. Is there any way for me to restore the boot record for the windows partition without having to reinstall windows from the ground up?! I can't use Linux for my webbanking and other important tasks, so (unfortunately) I need Windows back desperately!
Yesterday I upgraded from 10.04 to 10.10 (x86_64). The upgrade itself succeeded, but now just before the login screen appears there is an almost fullscreen nVidia beta logo showing up. With 10.04 it did not.
Driver version is 260.19.06, graphics card is a GeForce GTS 250.
How can I hide the logo? I can't find a setting for it in the nVidia X server settings.
I'm having difficulty upgrading from 6.06lts to 10.10.
I have downloaded and burnt a cd, however it freezes on any option from the boot menu. I've tried the various options to no avail.
So i then tried a frugal install using unetbootin however when I try bootin through that using the 10.10 iso it comes up with this
Code:
My computer cannot boot from a usb. I have tried.