Problem is that Ubuntu installation program doesn't want to "offer" Dual-Boot option on my main HDD. Only format option and manual partitioning.
View 1 RepliesI have a MSI a6000 Laptop (that has given me a lot of problems installing Ubuntu.
I finally had to run Ubuntu from a CD in nomodeset
Then when I go to install Ubuntu the only options it gives (regarding my harddrive) are to format my whole hardrive or do the partitioning. I have seen screenshots though where there is a third option on the same page to install ubuntu alongside a prior OS and dual boot.
Does anyone know why the "install alongside a prior OS (dual boot)" option doesn't show up?
A few weeks back I was trying to install this (alongside windows 7) and no matter what I tried it would not install. I tried both 9.04 32 bit and 9.10 64 bit. Each screen (language, keyboard, etc) took about 20 minutes to load, and when I finally got to the install it always stopped at about 2/3 percent, giving some type of I/O error. No matter how many times i reburned and redownloaded. (old thread if you're curious)
I eventually gave up but then realized I had an old xbox hard drive hooked up that I cannot boot or read or do anything. It was set as hard drive 0 in windows hard drive manager or whatever. So I unplugged it. Now my windows drive is drive 0, and I have a second internal drive.
I finally got back to installing this. I avoided the graphical installer at first because it was so slow, opting for the alternate cd. It went fast but when I tried to partition it was unclear to me which disk i was partitioning. Doesnt matter because when i clicked ok, it froze at 0% for 30 minutes so i had to do a hard restart. Windows ran the disk check, etc, etc, I checked the disk management in windows and it was just a single windows partition as it should be.
So I tried the graphical cd again instead. It goes really fast through the screens now, HOWEVER it will not detect my drive 0 windows drive! Just my second internal drive which of course I can't install on without wiping the entire thing. I have installed kubuntu 9.04 dual booted with windows xp on this exact hard drive, over a year ago successfully, so I don't get it. What do i do??
I'm trying to install Ubuntu as a dualboot, i also have Windows XP. But during the installation, when this screen should appear
(Translation)
(*) Dualboot, choose at startup
( ) Empty and use complete harddisk
( ) Use biggest connected space
( ) Manually adjust partitions.
I get a screen with only 2 options, the second and forth. How do I get the Dualboot option?
No option to install alongside another OS. I have Win7 Starter on this new netbook and need to install Ubuntu 10.10 netbook addition. Disk Management shows 4 partitions, one is C:, one is D:, and two I've never seen before they're so small. Is it safe to delete these or do they have a purpose for the current Win OS? I would gladly install the 10.10 to my D: drive which seems to be SDA2, the 131GB partition. What's the right sequence of partitioning and formatting to give Ubuntu the full install it needs manually? And what needs to be taken care of for a Swap drive?
View 9 Replies View RelatedI want to install Ubunto netbook on my compaq mini 730, but I want to keep my windows xp OS as well and have the dual boot option. At the moment I have the hard drive partitioned to C and D. My question is - what is the best way to install ubuntu and keep windows ? Should I create a separate partition for it ? if yes what size ? Can Ubunto install itself on C next to windows automatically ?
View 7 Replies View Relatedhow to use dual boot option?? i wanna use xp and federo.
View 1 Replies View RelatedI have install ubuntu and windows in the same computer in their own partition. I think that I have remove something while I was reinstalling some wireless stuff using synaptic. When I launch the computer I get the dual booting but only with memory test and windows. I have the ubuntu installation cd. What can I do to get back the dual booting with the facility to launch ubuntu.
View 1 Replies View RelatedI've installed Windows 7 Ultimate on a notebook which previously ran Vista. No problems there.I've now installed Ubuntu (now updated to 10.04)so that it can boot to either OS.
It all works fine and when I first power up, I get a screen which invites me to select the OS I want to use. There are however two problems:
1) it defaults to Ubuntu (whereas I would prefer it to default to Windows 7 (it's a work laptop and most of the applications are Windows-specific),
2) the list of choices is getting increasingly complex with an expanding list of choices (with each major update of Ubuntu adding more); it even seems to include an option to go back to Vista!As long as I move down the list and make the right selection quite speedily, I get to where I want to be (though, as I say, I would like to change the default option).Is there any way I can edit/shorten this list without damaging the functionality and how can I change that default?
I've installed Lubuntu alongside my existing Windows XP installation. The menu came up on boot allowing me to boot into either Lubuntu or XP. But, after I install all the Lubuntu updates and restart, the option to boot into XP is gone. The boot menu comes up, but no XP option. I reinstalled Lubuntu again with the same results: after the updates, no XP option. I'm thinking I will reinstall Lubuntu again, and before I run the updates, I will make a copy of grub.cfg for later reference so I can add the XP section in again- am I on the right track here?
View 5 Replies View RelatedI am trying to install Ubuntu 10.04 LTS on a Windows XP Media Centre Edition system.On the Step 4 of the installation which usually gives you the option to partition the disk but it only gives me the option to Erase the entire disk or specify partition manually, although this also doesn't allow anything other than totally erasing the disk. I'd ideally like to keep my Windows and I have installed Ubuntu before (but 9.10) on a different system.
View 9 Replies View RelatedInitially had windows xp in my system. Picked up on free partition (*it was not a primary partition*) and installed Debian from CD. The installation went fine. Towards end of installation the grub install ran detected windows xp presence and I continued with the install. End of install, prompted that the system would reboot.
However on reboot, I wasnt presented when boot option ( windows xp vs debian) but my windows xp directly got booted. How to get this boot option.
A while ago I messed up my Ubuntu installation so I decided to boot the install from the disc again and overwrite it. It turns out the installation disc does not give you the option to replace a current Ubuntu installation so I was forced to take more space out of my windows [vista] installation. This means I now have 1 ruined Lucid Ubuntu OS, 1 Working Lucid Ubuntu OS and a windows Vista OS system. Is it safe to delete my ruined Ubuntu from inside vista? Is it possible to overwrite my Ubuntu installations? How can I delete them both and then install Lucid again?
I want to know this now as Maverick Meerkat will be released on Sunday and I want to install that in a clean installation without deleting my vista installation. I do not have the Vista installation disc because Vista came pre-installed. I am not willing to buy anything.
what distros offer a USB image as an option uther than an iso. i don't like using unetbootin
View 7 Replies View RelatedI have a /boot partition, and the online update process has downloaded the upgrade to /boot/upgrade. The problem is that grub is actually booting from a directory /boot which is in the root partition, but is invisible once the machine has booted, because the /boot partition is mounted over it. The result of all this is that the upgrade option does not appear in the boot menu, because that option has been inserted in the menu.lst (or grub.conf) in the /boot partition. is it ok for me to run:grub-install /dev/sda4(that's the device that contains the /boot partition where the upgrade menu option and data). Also, do I need the --root-directory option, given that the boot directory is the root directory of that partition.
View 3 Replies View RelatedAll this started when I decided to upgrade Ubuntu 9.10 to 10.04. Now Windows XP gives me a blank screen and doesnt run. I have tried a bunch of things but didnt help. I also clean installed Ubuntu 9.10 into a new partition and removed the deleted the other partition.
[Code]....
1. Windows XP on sda1 wont start from grub2 (version 1.97-beta4).
2. I can access the windows partition from Linux and see all the files.
3. When I boot using windows cd, and go to recovery mode it doesnt list Windows XP.
4. From windows Recovery mode when I try "diskpart" it says no partitions in c drive.
I am trying to dual boot windows 7 and ubuntu 11.04. I downloaded ubuntu on to a DVD-RW and booted up my computer from the DVD. I follow the installation process until the part where there is supposed to be three options to install. I only get two options and I get the message "no other operating system detected on this computer" so it doesn't give me the option to dual boot.
View 1 Replies View RelatedI've just installed the 64 bit edition of 9.10 on my workstation. My raid drivers worked without any custom installation, which is very impressive! I am however having a problem installing grub2. I boot to the live CD, run the install process, resize and partition my free space as an ext4 primary partition with mount point /. Everything installs except grub, so I'm always booting in to windows.This seems to be a bit off as I've never had this occur with dual booting before.
View 9 Replies View RelatedI am running ubuntu 11.04. I am able to set my screen size to 1600x1200 in windows but ubuntu doesn't offer me that size in xrandr, though it says my maximum size is 4096x4096, I have posted my xrandr results below. What do I do to set my screen to the higher resolution?
Screen 0: minimum 320 x 200, current 1280 x 960, maximum 4096 x 4096
VGA1 connected 1280x960+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
1024x768 60.0
800x600 60.3 56.2
[Code]....
it's my first time to try openSuse, i want to dual boot openSuse with windows vista home premium. anyone can tell me how to dual boot openSuse 11.2 with main os windows vista step by step start from partition harddisk which use by opensuse, and how to set the grub.
View 2 Replies View RelatedI was running Ubuntu 10.04 as my only OS. I then booted from the Ubuntu CD and divided my HD into two partitions, one for my Ubuntu and the other I formatted to NTFS so I could load Windows. I booted from the Windows CD and installed Windows on the second partition. I am now unable to boot into Ubuntu and I do not have a boot menu at start-up to choose what OS I want. I went back in with my Ubuntu CD and selected the "bootable" option for both partitions through Disk Utility but it still boots only to Windows. If I change the Linux partition to "bootable" and deselect that option from the NTFS partition, my computer starts up and then give the error, "No operating system present." What do I have to do in order to have a boot menu show up that will allow me to choose what OS to use at start-up?
View 3 Replies View Relatedi need win7 to run a rip software for my new roland printer, but i want to use and learn ubuntu for personal use. i tried installing win7 then installing ubuntu next to it. now when i start the laptop it only starts ubuntu and there is no option for win7.
View 9 Replies View Relatedhave just installed Ubuntu alongside Windows 7. I just went along with the manual set-up all through the install. I was expecting to see an obvious option on starting up my computer as to whether to run Ubuntu or Windows but it just goes right ahead and runs windows exactly as it did before the install.
View 5 Replies View RelatedHere's the short version of what happened
--Had windows 7 and installed Ubuntu dual boot
--all was well but after some messing around with a failed Backtrack install I had to repartition some things to clean it up
--The partition where Backtrack was installed was corrupt so I deleted it and extended my Ubuntu partition.
--reload got the no such partition rescue grub
--read threw a bunch of forums and could only seem to find mostly threads on only being able to load Ubuntu and not Windows. Most having to do with post OS install problems and not re partitioning.
--I decided the best thread to follow was [url]
--after that my memory of events is a bit fuzzy, a lot was going on. In short I got a message in the terminal saying "this is a BAD idea" and something about another MBR. (sorry I cant be more specific)
--reading on I decided I would try my windows bootloader restore
--now windows loads up fine but it doesn't even give me an option to boot Ubuntu. I launched a live CD and checked GParted. The partition is still there.
Sorry if this is threaded somewhere already, I know that annoying. I'm just burnt out on combing forums and broke down and decided to ask directly
I've just installed Fedora (F13) for the first time, on a new HDD, to give myself a dual-boot system. So currently I have:
So, at the appropriate stage in the install menu, there is an option for where to install GRUB, and a drop-down to choose which drive is the primary BIOS boot drive.
However, in both cases, no other drive except my new sdc is visible. So, I can install GRUB to MBR of sdc, or to first sector of boot partition - but no option to put it to my primary boot drive MBR on sda.
Likewise, in the GRUB configuration page, if I go to Add another OS, the only option it gives me is my new Fedora install. It doesn't list the Vista OS on sda at all.
The result is that I can boot to either OS by changing the boot drive priority in BIOS.
I guess my question is this:
- is this expected behaviour from the installer, meaning that I'll need to configure GRUB manually somehow? (gulp ) or
- did I do something wrong in the install process? or
- is this some weird bug manifesting itself?
I installed fedora aside of windows 7 home premium 64 so I can choose which one to star. But its always fedora I set bios to boot from the cd drive and yes it ask me hit any key to boot from the cd so I can reinstall windows 7 but it's fedora again. It happens the same with the USB drive. I think I don't need to reinstall Win7, it's there in Hard Disk. I am new in Fedora (infact I installed Fedora today in the morning).
View 1 Replies View RelatedI have a fubar'd Windows 7 install I need to get working on another partition so I can do some development stuff. I use Ubuntu 95% of the time though and so the machine has an option at boot for what OS I want to go into. Does anyone know if I boot up with the Windows disc in and choose the repair option if it will screw up my boot options and I potentially lose my ability to boot into Ubuntu?
View 1 Replies View RelatedBasically what it says in the subject. In the Allocate Drive Space part of installation theres 'replace Windows 7 with Ubuntu' and 'Something else' but nothing for installing them alongside each other, which I want to do.
View 14 Replies View RelatedI'm currently having a problem trying to remove the black screen that appears at Start-Up that asks me which operating system I want to run...I've already deleted wubi but this screen keeps appearing every time my computer starts up...How do I remove or disable this feature?
View 1 Replies View Relatedi installed ubuntu desktop 11.04 on my acer aspire one 751h and found that the wifi didnt work. the netbook remix was the same so i went through all the previous releases up until 8.0.4.4 which worked fine on the live cd. so i tried to install but the installer didnt see my main hard drives only the usb i was using to install. so i tried using wubi installer which only left me with this screen when i tried to load up ubuntu.
View 3 Replies View Related