Ubuntu Installation :: Can't Boot Azuz Eee PC1015 / Solve This?
Nov 25, 2010
My first attempt at seeking help has not been very successful. Probably to much of a narrative. If you want to know How I got in this mess see my first post.
Machine: Asus Eee PC 1015
What I know: I can't boot into anything but Live USB
What I think: Win7 starter is still there
Mint9 is lurking as well
Vista recovery partition exists
What I don't have: External USB DVD or CD drive
Win7 Recovery
What I need code...
View 9 Replies
ADVERTISEMENT
Dec 30, 2010
I have a MSI a6000 Laptop (that has given me a lot of problems installing Ubuntu.
I finally had to run Ubuntu from a CD in nomodeset
Then when I go to install Ubuntu the only options it gives (regarding my harddrive) are to format my whole hardrive or do the partitioning. I have seen screenshots though where there is a third option on the same page to install ubuntu alongside a prior OS and dual boot.
Does anyone know why the "install alongside a prior OS (dual boot)" option doesn't show up?
View 5 Replies
View Related
Jun 28, 2010
I have a dual boot (2 hard drive) system, and upgraded to 10.4. Booting into XP results in a flashing cursor that doesn't do anything. I know that GRUB screwed everything up, but I need to know what to do--and assume I don't know what I'm doing--to restore my dual boot ability.
Here's what I get after running a boot info script code...
View 2 Replies
View Related
May 3, 2010
I just recently upgraded my kubuntu install from karmic to lucid and now it takes about 10-15 minutes to boot. Directly after the upgrade it was pretty slow already, but it got worse every day from then. The karmic version was a wubi install I moved to a dedicated partition using lvpm. Here are the results from the bootinfoscript code...
View 9 Replies
View Related
Jul 19, 2011
I've created my own wheezy live usb-hdd using:# lb config -a i386 --mode debian --distribution wheezy --linux-flavours 686 -b usb-hdd --bootloader syslinux --memtest none -p xfce
P: Considering defaults defined in /etc/live/build.conf
P: Creating config tree
# lb build
The binary.img was created.
Now if I try to boot from this image using qemu, I get a message "No bootable device"
If I check this main partition using gparted, the flag is "lba" instead of "boot".
Even doesn't work if try to change to "boot".
How to solve this problem?
View 13 Replies
View Related
Apr 22, 2010
My computer won't boot up from the installed version of Ubuntu. I was running 8.04 with no problems, but it stopped working after entering a command code to fix the limit for virus definitions on Avast. I removed the code, but now on boot up all I get is a blank screen and blinking cursor.
I can boot up with an Ubuntu 9.1 live disk, and it shows the installed version of Ubuntu and all my data are still there. Is there a way to do a general repair, that will enable my computer to boot up from the installed operating system?
View 9 Replies
View Related
Jun 26, 2010
Can't boot after updating x this has happened before but not like this. Grub works just fine but nothing after what I can't do
1 10.04 = black screen
2 recovery mode=black screen
3 ctrl+alt+f1 = nothing
View 9 Replies
View Related
Feb 6, 2010
Can't boot after upgrade to 2.6.31-19 kernel. Boot procedure stops on "Mounting root file system..." stage with message:
/init: line 218: syntax error: 0xhda1.
View 9 Replies
View Related
May 2, 2010
I installed lucid the other day on my laptop, the first time it booted after installing it gave two error messages (unfortunately I can't remember what they said). The errors stopped appearing after that but once I select Ubuntu from the boot menu, it just hangs on a black screen for a good 15 seconds at the least before it runs the plymouth screen for like 2 seconds (the progress bar is already full) and then goes into the login screen. Here is my boot chart:
http://akgenome.com/files/bootchart.png
I was wondering if anyone can tell from that what is causing the issue and perhaps how to fix it? The boot log is like 3 lines long and is completely normal.
View 1 Replies
View Related
Oct 16, 2010
For the past few days, my Ubuntu server (it is a desktop that functions as a server, Desktop installed) have been very slow.
Today, it stopped responding to ping, I could not SSH into it (once, I managed to come so far that it asked for my password, but I got timed out) and I could not connect via VNC.
I switched it off, to boot it up again. Post completed, and the screen went black, before the white text "Read Error" appeared on the screen.
I shut it down again, waited a minute or so, before switching it back on. This time, the "read error" did not show up. The "text only" startup for Ubuntu showed up, so I hoped it was all okay. It turned out it wasnt.
I have some pictures:
http://yfrog.com/4pimag0127xj
http://yfrog.com/jnimag0128bj
The top lines are code...
Any ideas on what could be the issue here, and how to fix it?
View 5 Replies
View Related
Jan 3, 2010
I bought a Linux magazine as a Christmas present attached to it was a 8GB distro-loaded disc sporting Ubuntu 9.10 (which is already on my system,) Mandriver, and open-SUSE 11.2 which I decided to install.
Problem is, I can't get into Ubuntu anymore, where all my mail music ect is.
Ubuntu is listed with vista in window 2 of open-suse grub. When I try to boot Ubuntu I get an earlier kernel splash which is somewhat magnified and busybox v1.1.3. Vista boots OK.
Would un installing openSUSE put things back as they were? I can learn about open-SUSE using the DVD
View 9 Replies
View Related
Dec 27, 2010
I'm running 10.10, I just recently installed a new graphics card, a Radeon HD4670, Ubuntu loads, and after it's finished loading, it goes to a black screen, and stops loading. I previously was using a nVidia 6200.
View 4 Replies
View Related
Jan 23, 2011
I installed kubuntu a while back on an AMD64 3200 and hit some problems I can't solve: ran out of space on /boot & opera KEYEXPIRED.This is a multiboot machine. I have the /boot partition on an extended ext4 /dev/sda5 which is 50 MB size which was fine when I first set it up. It seems however that it is no longer sufficient for GRUB2:
Code:
$ sudo apt-get upgrade
...
[code]....
View 9 Replies
View Related
Jul 3, 2010
I have fedora 13 64 bit installed on my desktop. I have i3-530, 2G ram, wd 500g sata, ide samsumg dvd-rw, asus h55 mb, geforce 9600 low profile.
problem is f13 often almost always freezes at boot up.i.e., after grub, that blue heart hangs on there waiting to be filled up.. but wait forever.
what might be the problem?
View 10 Replies
View Related
Jun 28, 2010
I downloaded Fedora-13-i686-Live.iso from the fedora project web site, and did the instruction on how to burn it using dvd. i used nero selecting burn a CD from an image file. after doing that, i restarted my laptop to install fedora 13 choosing to start the boot at the disk dvd but it won't boot to run the installation. instead the laptop will resume booting to its previously installed OS, fedora 9.
i browse the dvd media and there are 3 folders namely EFI, isolinux, LiveOS and GPL file.
View 9 Replies
View Related
Feb 20, 2011
I've tried reinstalling Slackware64 13.1 to my PC a number of times over the past couple of days and I still have not been able to get it to boot.
Once it's installed I reboot and it tells me it can't find the operating system.
I've tried fdisk, cfdisk and GParted to set up the disk by deleting partitions and recreating them.
When I install and get to the section about installing LILO it says I have an OS/2 or Partition Magic boot manager on the drive, but there isn't. It asks if I want to install LILO in a compatible way with the boot manager and I say no, and install to the MBR. When I reboot it says it can't find the OS.
When I try to boot from the install DVD and get to the boot: prompt, I'll enter /dev/sda1 and it says there is no kernel.
Is there something else I'm missing?
View 1 Replies
View Related
May 21, 2010
I have recently completed a fresh install of 10.4 LTS which installed without a hitch. But I have noticed that since I have moved to Lucid on my T43 the hard drive light is constant for at least 20 mins after each boot. Everything seems to run ok albeit during this time apps take a little longer to open as the HD is busy doing some thing...I just don't know what! BTW I am running the Gnome desktop and its a fairly vanilla install.
This didn't happen in the previous Ubuntu version I had installed on here for several months prior.
Does any one have any ideas what this may be or how I could find out what it is that is using the HD for this length of time on boot.
View 8 Replies
View Related
Sep 4, 2010
I have a problem with the kernel update to 2.6.34.6. Up until 2.6.33.x my system boots fine, but with this update the boot stops at the moment that the mouse cursor should become visible. To resolve the problem, I've gone back to 2.6.33.x and removed the 2.6.34 kernel but I wonder what happens with the next kernel update.
Anyone else having this problem?
View 8 Replies
View Related
Jun 8, 2010
Can't install Ununtu 10.04
I can not install ubuntu 10.04 32 or 64 bit on my computer
Every time I put in either DVD I get a guy and next to him is a regtangeler box, then the screen goes black with a blinking white line up to the left and then it goes completely black then monitor turns itself off
This happens with both 32 and 64 install versions
So how do I install it or just use it a s a live cd
I have a pretty new computer that I Run windows 7 on that I am trying to get Ubuntu on code...
View 7 Replies
View Related
Apr 16, 2009
Computer: Dual AMD 280 Processors, Tyan Thunder K8WE S2895 Motherboard, 8x 2GB DIMMs.
Installed Fedora 10 86x64 from ISO burned to a DVD. Installation went ok, and computer needed to be rebooted at the end of the installation. Upon restart, Fedora 10 loaded to initial setup screen where user name, date, time, etc are set. At the end, as this is a stand-alone computer, the setup requests to send data of computer setup to Fedora.org and this request has to be denied. Pressing the Finish button ends up killing the system. The system doesn't reboot, what does happen is that the screen goes to black, and no signal is given to the monitor; the system hangs at this state. I've tried to see if giving the setup the ability to send the system data would change the end state upon pressing Finish, but nothing changes.
View 1 Replies
View Related
Apr 4, 2011
I have installed Ubuntu 64bit 10.04 LTS version. I am trying to install open-iscsi and my apt-get install commands hangs code...
my sources.list seems to be fine. What might be the issue?? never had this issue on a 32 bit version of Ubuntu 9.
View 1 Replies
View Related
Apr 29, 2011
When I did my upgrade and logged into Unity I had no panels at all.
Turns out it was code...
I had this to get smoother HD playback but it seems it wasn't needed anymore. Video playback was just as good as before even when I removed this.
View 1 Replies
View Related
Jul 31, 2011
I wanted to install Ubuntu 11.04 on my pc (dual boot with windows xp which is already installed on one disk).
I have a Asus P5K pro (motherboard) which has a integrated raid controller and i have two 500 GB hard disks.
On BIOS raid is disabled. On Windows i see 2 different disks (correctly)..
When i try to install Ubuntu, on the disk/partition stagei only see /dev/mapper/xxxxxx which should be the raid (i could be wrong). I tried booting inserting the nodmraid option but if i do i cannot see any disk.
what can i do to solve this?
View 3 Replies
View Related
Mar 23, 2010
I'm trying to install ruby on rails on Ubuntu 9.10. I'm following the instructions on this site:
http://castilho.biz/blog/2009/11/05/...-karmic-koala/
However, when I try to install Rails I get an error code...
It seems like gem can't access http://gems.rubyforge.org/gems/rake-0.8.7.gem for some reason, but when I try to go directly to that address I get the option to download it. Any ideas how to get around this problem?
I'm thinking if I can somehow tell gem to look for the file locally I can download it and install rails that way.
View 3 Replies
View Related
May 19, 2010
It was working in version 9, after I install the new one Ubuntu 10.0.4 LTS, it can not wake up after hibernate and suspend. I am using Dell studio Desktop
View 2 Replies
View Related
Nov 24, 2010
I am running 32 bit 2.6.32-26-generic-pae #47-Ubuntu SMP Wed Nov 17 16:14:46 UTC 2010 i686 GNU/Linux
Every time Update Manager updates the Kernel, the kernel and it's associated source code is upgraded, but the LINUX-HEADERS for the associated kernel are not updated.
This is a problem because without the updated linux-headers, my Nvidia drivers fail to recompile and load. A PIA. I then have to go to Synaptic Package Manager, find the appropriate linux-headers for the new kernel version, install it, reboot, and then Nvidia drivers load and function again.
Something is obviously messed up here. I likely caused the problem thus:
On first install of Ubuntu 10.04 LTS on this machine, it installed with the generic kernel. It saw/found the Nvidia drivers and loaded them OK (I may have had to do some Nvidia installs via Synaptic; I don't recall). My machine has more than 4GB ram, and I noticed it was not using nearly all of it. I researched and found the solution was to switch to the PAE kernel, which I did. Ever since then at every kernel upgrade, the Linux-headers fail to update, and have to be updated manually for Nvidia to function.
Now that I know what the issue is, it's not a big deal. However, Update Manager should know I need the Linux-Headers and upgrade them at every kernel update. How can I insure this happens auto-magically like the rest of this fine and beautiful KickAss OS?
View 5 Replies
View Related
Jun 25, 2011
I usually don't have problems installing Linux but Fedora won't install into 4 GB for me. I get to the partitioner, try to create a 4 GB partition, actually have 7 GB free, but it tells me there is no space on the drive. As I said, I usually don't get this problem but have not tried Fedora before and don't understand.
View 3 Replies
View Related
May 2, 2010
My computer has 2 HDDs attached to 1st and 2nd SATA ports of my mobo respectively, the 1st SATA drive is empty while the 2nd have my Windows Vista on it. I also have a Perc/5i RAID card with 2 RAID arrays defined.
I am going to install Ubuntu 10.04 x64 to the 1st SATA driver (I expect it will be /dev/sda), but when I try to install, I found my drives are recognized as below,
/dev/sda > 1st RAID array of my Perc/5i
/dev/sdb > 2nd RAID array of my Perc/5i
/dev/sdc > 1st SATA drive < I need to install ubuntu on this drive
/dev/sdd > 2nd SATA drive
I don't want to install 10.04 as /dev/sdc because I may add more arrays to my raid card which from my experience of 9.04, it will probably change the drive letter of my current /dev/sdc and then system will fail to boot.
Is there any way to force my 1st SATA HDD as /dev/sda during install ?
View 1 Replies
View Related
Jul 7, 2010
Synopsis: I wiped my system and am using ubuntu 10.04 with no problems *except* that I now need IE 8 and MS Excel/Access/Powerpoint/Word for classwork. I kind of tried toying with WINE, but ultimately would rather just have a dual boot.
What occurs when I try a (any) Windows install (keep in mind I even swapped out a fresh Sata HD and the same problem occured:
Pop in a Windows ISO bootable CD>everything acts normal and I follow the prompts for a fresh install (not an upgrade)> It begins the install but the first part where it is "copying files" just goes to 100% in a split second>Then it moves down to the next prompt of "Expanding Files" at which point the laptop is spinning the disc/reading it but it just stays at 0%.
So, it's not a HD formating problem, right? I wiped the system, reformatted and got the okay from Windows that I could install so I assumed I reformatted it back to NTFS.
View 2 Replies
View Related
Aug 13, 2010
Trying to install Ubuntu 10.04 on a HP 6540b laptop - dual boot with Windows 7. I keep getting stuck on:
1. [GUI install] after step 3 of 7 where a KB layout (I've tried many other layout) is selected then going next and it hangs there trying to do something.
2. [Alternative install] stuck on 45% of scanning disks at "Starting up the partitioner" code...
I've tried desktop 32bit and 64bit install and also alternative 32 and 64. Also tried installing from CD & USB drive.
I guess it's something to do with the disk partition? Anyone come across this before?
I've installed 10.04 with similar dual boot partitions layout on an older HP 6710b without any issues.
View 1 Replies
View Related
