Ubuntu Installation :: Downgraded But Not Able To Installed Lower One - Enable It?
Sep 20, 2010
I am really in need of expert help. I have started using Ubuntu last week, so a novice, and this is for my project work which needs a linux OS to install another programme (OOF).
I have installed 10.04 in an external hard disk and was able to use it without issues. While attemting istalltion of OOF it was giving me error messages and OOF forum suggested to use Ubuntu 9.04. So i have started installing 9.04 from the same external drive after uninstalling 10.04. I have used the live CD for both these installations. But Ubuntu 9.04 never completes the instalaltion. It is getting struck and aborted twice. My external drive is not partitioned and windows 32 bit is laptop -ACRE ASPIRE 5738, 250 GD HDD, Vista and 4 GB DDR.
I ran the update manager a few weeks ago and for whatever reason, it downgraded me from Firefox 3.6 to Namoroka (Firefox 3.6 beta release from what I understand). Having had Namoroka before, and knowing how unstable it was, I immediately removed it and reinstalled Firefox 3.5 from Linuxappfinder.com. Upon this last update, Ubuntu again downgraded me from Firefox 3.5 to Namoroka. I am worried about updating my other computer because of this problem.
I tried to add my wife , and when I put in a password for her, this error comes up."Please set a valid user name consisting of a lower case letter followed by lower case letters and numbers." I did all that and I still can't set a password for her.
I burned 2 cds using K3b and the speed was 8X, I think that is the minimum, but it didn't work so I Want to go a speed lower, what is a software that has this? And also, what is the lowest speed I should go?
I've read a lot about wireless network cards but I haven't found something similiar to my problem. I've a belkin wireless card F5D7000tt and its driver bcmwl5.inf. I think I've correctly installed it because when I use "ndiswrapper -l" i get:
WARNING: all config files need .conf: /etc/modprobe.d/ndiswrapper, it will be ignored in a future realease. bcmlw5.inf: driver installed device (14E4:4320) present (alternate driver : ssb)
But when I go to Hardware Drivers I see that "Broadcom B43 wireless driver" is not enabled, and when a try to enable it I get an error message:"We are sorry, but the installation of this driver failed. Check the register archive to see more details: /var/log/jockey.log"
Can't enable 3d effects on lucid lynx even if restricted nvidia driver (v195.36.24) is installed and activated. Actually 3D effects were working with compiz etc, but at a given moment -not sure if after the final release of the 10.04 - they stopped working, and now it always fails to enable them.
im using awn as my dock, and i'd really like to get some themes going to make it look a little nicer. when i go to the themes tab, it tells me "You need to enable desktop effects (compositor) to apply and customize themes".So in compiz how do i go about enabling them?
I recently installed Deluge 1.2.0 from the following PPA:[URL]I using this on two different Linux computers. One is running Linux Mint 8 and the other is running Ubuntu Netbook Remix 9.10. The first time on either computer when I enable WebUI in the Deluge GUI it works fine. However if I ever disable it in plugins section I am subsequently unable to re-enable it (doesn't appear in the side panel again). Rebooting or reinstalling Deluge seems to have no effect.Is this a bug or am I doing something wrong?
I have two problems. I installed a RHEL variant (scientific linux) on an already dual boot system with ubuntu and vista.
It replaced GRUB with (I think an older) GRUB version and to add to that I cannot see my ubuntu ditro anymore. is there a way of reinstalling the GRUB that came with ubuntu then adding the RHEL distro to it?
my second problem is that I cannot figure out how to enable wake on lan in scientific linux (RHEL). on ubuntu I would just write a small script and update all runlevels to run it at startup. what is the alternative on redhat?
I am trying to install mysql 5.1.44..so i downloaded the binary package, i extracted it and then followed the instructions that were in the manual but i keep getting this error when running this command
Installing MySQL system tables... 100315 20:07:27 [Warning] Can't create test file /var/lib/mysql/mosty.lower-test 100315 20:07:27 [Warning] Can't create test file /var/lib/mysql/mosty.lower-test
If I do System-Preferences-Personal File Sharing it tells me that I can't enable sharing over the network because "the required packages are not installed on your system". It doesn't tell me WHAT packages I need to install!
I would like to enable personal file sharing so I can access my laptop (hp Mini laptop w/ ubuntu) from my mac mini (OSX 10.4.11), but the message I get in PFS dialogue box is "This feature cannot be enabled because the required packages are not installed on your system".
How to lower the resolution of all the images in a pdf? I searched around and couldn't find an answer to this. I have a pdf file of a textbook that I use in school but each page is an image of 2 pages of the textbook (left page, right page when the book is opened) and each image is of a very high resolution. I downloaded pdftk and pdfedit but for such a simple problem, I'm having trouble. Is there any way to do this?
I have tried converting the 380 MB PDF file to PostScript but after an hour of doing that, it stopped, and the PostScript only had about 17 pages instead of the 733. So converting it back to a PDF file to utilize pdftk's algorithms would have been worthless. I know I could split up the pdf file into sections but I'd rather just scale down all the images, or make them mid quality PNGs or high quality JPGs just so the filesize can be halved.
I need to run fsck on my Ubuntu 10.04 machine, but when trying to enter lower runlevel (with init 1), computer freezes with error message "could not write bytes broken pipe". So, how I can fix this and/or check my disk with fsck?
I installed 10.04 1st by making a partition with bootcamp on MacOSX.Then I formatted the partition according to Ubuntu's instructions. I didn't install rEFIt, because I prefer to just hit the alt (option) key.I made the necessary adjustments according to URL...Community Ubuntu Documentation - and everything seemed to be working fine.I upgraded to Maverick and everything seemed to be working fine aswell.But then I noticed, that the wireless signal keeps failing and I'm asked to put the password again and again..
I don't think this is due to the upgrade from 10.04 to 10.10, but I just noticed it recently, maybe because of the air humidity, the signal was stronger a few days a go.. don't know!!Is there anything I can do?Perhaps install a new driver, or another wificlient, like Wifi-Radar??
I want to move notifications both from pidgin, rhythmbox and other apps to the lower right side so that they are not so intrusive, I don't know if it's possible.
I needed Ubuntu server and recklessly picked Karmic. Hardware is some regular 775 mobo with integrated Intel graphics. Monitor is ASUS VH222D. Installation went smoothly but after that problems occurred. Shell is displayed in 1920x1080 resolution and fonts are so small almost unreadable. Grub2 looks OK, standard non-fb and so does few rows of text after loading grub but soon after that framebuffer becomes active.
dpkg-reconfigure console-setup doesn't mention resolution. Some articles are leading to grub2 gfxmode but none of manuals helped. I just cannot change grub2 menu resolution to anything else than standard console fonts (non-fb). Kernel option vga=XXX is no longer working.How to lower shell resolution? Why is this automatic???
After upgrade to ubuntu 10.04 my screen resolution become 800x600 and in 'Monitors' I see only 2 options 800x600 and 640x480. but before upgrade I had much higher resolution in 9.04
I have an EEE PC 1000H, which comes with a 10.2" monitor with 1024X600 resolution. Ubuntu mostly works well on it, but on certain applications I cannot see the buttons that would appear at the bottom of the program. This has happened on the Disk Utility and Gnome Color Chooser
Its really annoying I don't have a monitor I just use VNC and putty to control my computer and when ever I vnc in and hit d all the windows minimize I tried deleting everything under .gnome2,.nautilus,.gconf and nothing. I love Ubuntu but this upgrade has been nothing but problems. I did a complete reformat and its a huge pita. its problem after problem never had this with 10.04
I upgraded from 9.04 to 10.04.1 so I am still using legacy grub.Anyway, I noticed with the update that the console is using the framebuffer and using VESA for high resolutions.I really don't like or want this feature. So I added vga=0 to get 80x25 and it works initially but just when the X server is running (Xubuntu in my case) I can see how the console switches to a high resolution again. After this, if I go to a console, lets say tty1, it is using again a high resolution instead of 80x25 (VGA). Is there a way to force the consoles to be in a lower resolution and keep it that way? It used to work fine in ubuntu 8.xx and 9.xx
I upgraded ubuntu to latest 9.10 version....after that the upper and bottom menu option are disppared and I am not able to right click to add panel...I serached so many post here but nothing worked for me it is really bad experience for me
I reinstalled gnome-panel but still the problem persists......I tried all options gnome-panel --help commands nothing works for me....I tried to boot in recovery mode also and terminal I am able to access execute commands.....but upper and lower panel are empty and I can not add any new stuff to them
This is my third Ubuntu installation, and even with identical hardware, sound volume is dramatically less than under Windows. I turn every slider up all the way, and it is still less than half as loud as Windows.
This is some thing that I've noticed with any install of Ubuntu whether its regular Ubuntu or Kubuntu etc. The splash that comes up with the distro name Ubuntu/Kubuntu on start up look perfectly fine and as it should until I've installed my Nvidia drivers. then it goes all bung.
Lower Resolution. Slightly different colouring and Not taking up the whole screen. Sometimes it even sits slightly to the right.
Is there a way that I can fix this? I know its nothing all that major but it would be nice if it looked as its meant to.
