im using awn as my dock, and i'd really like to get some themes going to make it look a little nicer. when i go to the themes tab, it tells me "You need to enable desktop effects (compositor) to apply and customize themes".So in compiz how do i go about enabling them?
View 8 Repliesi 'am try to enable desktop effects for compiz .., but i get this message Accelerated 3D graphics is not available Desktop effects require hardware 3D support.
My laptop is Hp Mini notebook 2133 im using Fedora 13,
my video card it's VIA CN896/VN896/P4M900
I am getting following error while trying to enable 'compiz' in 10.4.
"Desktop effects could not be enabled"
Output of [URL]
Gathering information about your system...
Distribution: Ubuntu 10.04
Desktop environment: GNOME
Graphics chip: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 02)
[Code]....
So, it looks like my hardware support all what it needs for Compiz. What else is going wrong here?
I have a Dell Latitude D520 with an Intel 945GM Integrated Graphics Card. I have been unable to get the desktop effects to work in either Jaunty or Karmic. When selecting Normal/Extra/Custom, I get an error:
Code:
Desktop effects could not be enabled
Graphics card info:
Code:
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 942/940GML Express Integrated Graphics Controller (rev 03) I've looked at countless threads pertaining to this issue, but nothing I could find resolved my issue.
Can we enable or install 3d Graphic effects on Debian(5.05 Lenny) Gnome Desktop.
Like ..what we see in Open-SUSE(desktop effects,3d workspace-switching,etc....)
can it be installed in Debian to look different.
A friend whom I turned on to Ubuntu with 9.10 recently connected a projector to watch a movie off her laptop. When it was connected, the laptop screen changed and it was clear that desktop effects through compiz were disabled. Thing is, since disconnecting the projector, I cannot get the effects back.If I go into Preferences - Appearance and click to enable Normal or Extra Visual Effects, the same thing happens. I.e. I get a popup saying Searching for hardware driver...and after about 20 seconds, the screen flashes a bit, and says
Desktop effects could not be enabled. Not sure why it's searching for a hardware driver. The computer doesn't require any 3rd party hardware drivers to be enabled - it doesn't have an nVidia card or anything like that.If it makes a difference, she yanked the VGA cord out without setting the display mode back to just her laptop with the FN and F key combo.I've tried:
-Reinstalling compiz
-Tinkering with options under Preferences - Display
-Ensuring that nothing is available under Preferences - Hardware Drivers
I have installed Lucid on my old T61p. And I am using the NVidia driver Nouveau. But I cannot work out how to enable compiz with it. Is it possible to have composite effects with this driver?
View 3 Replies View RelatedWhen trying to set up desktop effects with Compiz I get this message: Accelerated 3D graphics is not available Desktop effects require hardware 3D support.
I have used Fedora 10 last year and the 3D effects worked fine. I have a Nvidia Geforce 6100 video. I also have another hdd on the PC with Mandriva 2010 which I use and the 3D compiz effects work fine. I'm running Omega 12. Isn't it Fedora 12 w/ codecs added? isn't video detection the same?
So I was messing around on my laptop this morning and I noticed that my desktop effects were turned off. So i decided to turn them on but as soon as i pressed the "normal" option a pop up opens up and says "searching for drivers" then the screen flickers and finally it tells me "desktop effects cannot be enabled". Also my compizconfig wasn't functioning. for exmaple: I turn on wobble windows and nothing happens. No wobble windows.
View 6 Replies View RelatedI hope this is the correct section. I have recently updated to 10.04 and now Compiz/desktop effects wont work. When I try to turn visual effects on I get a message saying they could not be enabled. I'm a bit new to all this so not sure if I'm doing something wrong.I've looked at many threads regarding this problem and nothing they say has worked. iv tried using Hardware Drivers (in systems administration) but this says "no proprietary drivers are in use on this system".
Also I don't know whether this effects anything but when I open NVIDIA X Server Settings (in systems administration) i get a message saying "You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run `nvidia-xconfig` as root), and restart the X server."Does anyone know how I can get Compiz/desktop effects working?.
I am unable to run compiz or set any advanced desktop effects in my Ubuntu 9.10 running under VMware Workstation 7.1. This is the output of the compiz command:
Checking for Xgl: not present.
xset q doesn't reveal the location of the log file. Using fallback /var/log/Xorg.0.log
No whitelisted driver found
aborting and using fallback: xterm
no xterm found, exiting
What does all that mean exactly?
there is no System > Preferences > Advanced Desktop Effects Settings .im runnig compiz with lynx and im trying to access the advanced desktop effects but i can find it.
View 3 Replies View RelatedI ran "sudo yum install compiz-gnome" and when I run "desktop-effects" and click "Enable desktop effects" it just takes me back to the login screen.
View 1 Replies View RelatedI have installed Fedora 12 on my laptop (Lenovo X61s) and now I have some problems with my OS. Please help me to config my machine.Currently I can not enable Desktop Effects any more. I receive this message: "Accelerated 3D graphics is not available. Desktop effects require hardware 3D support."
I'm sure that I could enable the functions of compiz when I used fedora 11 and Fedora 12-beta on my laptop before.Besides, when I represent my slides, I can not see my screen on my laptop any more. It's dark. When I used Fedora 12-beta, I can see my screen and another screen for my representation.Is my Fedora lack of some necessary packages? Is it necessary to reinstall the VGA driver? How can I do?
I just installed Fedora on my system. What should I do to get some nice desktop effects?Is there something that needs to be installed? or do I need to change some settings?
View 4 Replies View RelatedIt keeps saying they cannot be enabled. but i have a good graphics card (too lazy to check what it is right now)
View 1 Replies View RelatedI click 'Enable' on the dekstop effects. Usually, nothing will pop up at all. Sometimes, the 'Keep Settings' thing will turn on, upon seeing I click it to keep the new settings. I turn the appearance page back on, and it says there are no effects enabled. I want to enable normal effects.
I had an old version of Ubuntu for almost half a year before updating to Lucid Lynx. I recently wiped the new version of ubuntu accidentally (lucid lynx) while playing around with it, but before I wiped it I had graphics driver and effects enabled no problem. Emerald and transparency worked, etc. I did the exact same steps this time that I did on my last install of Ubuntu- and now it won't work.
I have compiz installed but it won't enable effects either. My graphics card is a Nvidia GE Force MX, i think.
When I try to enable desktop effects it follows the usual procedures but at the very end it says: Desktop effects could not be enabled. My driver is working when I run that hardware test. this is my output from "compiz" at a terminal.
View 1 Replies View RelatedI have a Nvidia Geforce 8400GS card installed. I just reinstalled Ubuntu 9.10 on my computer, everything works but I can't enable desktop effects. I tried using the generic drivers in synaptic nothing. Tired the restricted drivers, (both of them) the system runs smoother, but still can't enable desktop effects.
I tried upgrading to 10. And after the upgrade and restart I just got a black screen. I couldn't even access the terminal So I went back to 9.10. I ran the compiz-checker script. And it spit back:
"More than one graphics chip detected -- sorry, the script can not handle that. Aborting."
Which lead me to believe the onboard card was still enabled. Unfortunately I can't disable it in bios as my bios doesn't have that option.
At first when i tried to enable desktop effects it said it was disabled and it had to enable it with control + shift + f12, whenever i did this it said it was enabled, but it actually wasn't.When i pressed defaults in the hope to fix it, it stopped working completely, i cannot even click on enable anymoreMy graphics card is a Radeon HD4850 and i have installed the driver trough jockey.The problem looks like this:I also seem to have a problem with themes that use transparent windows, i've tried several themes that were transparent for my friends, but they weren't for me...
View 2 Replies View RelatedFor some reason I cannot enable desktop effects. When I try to enable from the Appearance settings it actually turns on and I can see the effects, but then it pops up a message saying "Desktop effects could not be enabled" and then it turns them back off. I saw a thread suggesting I run compiz from the command line and check the output. But when I do that it works fine and gives no errors. I also tried downloading compiz-check and here's the output of that:
Code:
Gathering information about your system...
Distribution: Ubuntu 10.10
Desktop environment: GNOME
Graphics chip: ATI Technologies Inc Mobility Radeon HD 3650
Driver in use: fglrx
Rendering method: None
[Code]...
Running fglrx on 13.37 slack64 I get "Desktop effects are not available on this system due to the following technical issues"-except there are no issues flagged
View 6 Replies View RelatedI have an Acer Aspire One AO150 and am having trouble plugging in an external monitor under Ubuntu 9.10. There were no problems under 9.04. If I plug in an external monitor once the machine is already up, then bring up the 'display' application to activate it, it basically hangs. There are no problem under these circumstances if I have desktop effects turned off.
A few more details after a question below. The machine does not respond to its keyboard commands to switch to an external monitor, nor does it respond to Ctrl-Alt-F1, etc to switch out of X. The pointer is visible on the monitors (at the edge of each) and is frozen as a 'busy' cursor, but with no animation. The kernel does respond to SysReq commands (REISUB).
In the latest attempt I had the external monitor active earlier, then removed it and activated desktop effects. Upon plugging in the eternal monitor then bringing up the display application, it hangs.
Im a new member here.So please don't get mad at me.If i posted on a wrong section(Am I in the right section?) By the way,Here is my problem. My graphic card is Intel 82852/82855.And it passes the Ubuntu Desktop Effects requirement. I am aware of enabling the graphic card in Ubuntu 10.10, Since enabling the drivers was successful. I enabled the desktop effects.After i switched to Normal(Graphic Mode)the screen went blank. Then after i clicked ALT+TAB. there is an option to keep this option or not.I clicked Keep this settings. Then i proceeded in Web browsing(because i'm a web addict). Then i click CTRL+ALT+LEFT/RIGHT For the workspaces to switch. Then i found this 4 square transparent with black margin boxes.Which has a weird distorting effect.That effect is going crazy. Then i rebooted(Hoping to fix the problem).Then it is still there.
View 1 Replies View RelatedFor some reason my desktop icons have decided to be very small and can't be changed (systemsettings/appearances/icons/advanced) It happened after I enabled and downloaded the files need for compiz. I have disabled compiz and now have no 3D desktop effects, but still cannot alter the desktop icon size. What have I done?
View 2 Replies View RelatedCan't enable 3d effects on lucid lynx even if restricted nvidia driver (v195.36.24) is installed and activated. Actually 3D effects were working with compiz etc, but at a given moment -not sure if after the final release of the 10.04 - they stopped working, and now it always fails to enable them.
View 1 Replies View RelatedI am running F11 and want to spanky up my Gnome desktop a little by adding the desktop effects. When I try to enable it, my screen flickers then returns simply "unable to enable effects".I don't know where to go from here, I tried to google this but the 15 billions hits made me weep.One link seemed to provide some hope but after following the instructions, things went totally wrong and screwed up my X server; this could be because at first I didn't realise but a default install of F11 puts the PAE kernel on.
View 5 Replies View RelatedI am running Fedora 14 x86_64 with KDE and I cannot enable desktop effects. My graphic card is : 02:00.0 VGA compatible controller: nVidia Corporation G96 [GeForce 9400 GT] (rev a1
View 14 Replies View RelatedI've a question about KDE desktop effects. How do I directly enable KDE desktop effects in KDE? Now I have to enable Gnome desktop effects, then KDE desktop effects will be enabled. When I select "enable desktop effects" and press "OK" in KDE, it will tell me "... X configuration ..." something. What the hell is that? I never met this problem in Gnome. Is it a KDE's bug?
View 2 Replies View RelatedWhen I first installed OpenSuse, the sound and video drivers worked fine. But now, even after a new install and some basic driver-installation procedures, I can't get either one to work properly: I can't enable desktop effects (and when I try, metacity window decorations become invisible), and sound doesn't play through my headphones. I know the headphones are fine because they work on my Sansa, and I know general sound is fine because sounds work when I just use my laptop's speakers, but both combined somehow simply don't work.
I have a Dell Studio 15, and my output of lspci:
Code:
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 03)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 04)
[Code].....