Ubuntu Installation :: Can't Get To Reinstall On Computer - Goes Into A Black Screen
Mar 9, 2011
I can't get Ubuntu to reinstall on my computer... I recently reformatted and re-installed windows and I think that might be the problem because I was running Ubuntu 64-bit before I reformatted... Now the problem I am getting is when I go to boot up Ubuntu to finish the install it loads on the purple screen with the Ubuntu logo then goes into a black screen with white letters. Its the screen that tells you to reboot and go into windows a run 'chkdsk /r' and reboot again, the problem is I have followed those directions 3 times and it didn't work, I don't think the operating system really knows what the problem is.
Have tried to install 10.04 from a cd sent to me by ubuntu. lts on an x-windows medion pc mt7 (med mt 345). Previously comp. was running windows xp pro. After pressing restart at end of install process I get nothing! Black screen, no mouse control , no keyboard control, nothing at all.
Have tried putting cd in again but get nothing, on pressing restart the cd was politely ejected. Have tried rebooting a few times but get no response. Everything is switched on. So now I cannot even get a terminal up, the only thing I am fairly certain about is that the computer is sending a signal to the screen as there is Not a "no signal" message.
I had Ubuntu installed on my old laptop in dualboot with windows. This year i bought a new Sony Vaio VPCS12M9E preinstalled with windows 7 pro, but i liked the idea of having the opportunity of chosing between windows and ubuntu, so i downloaded ubuntu 10.10 and burned the ISO-image to a disc, and restarted my laptop just as i did when i installed it on my old laptop. The problem is that when i boot the disc after restarting the computer, the screen just turns black. What can i do to install Ubuntu?
this is my AGP card. My problem is while using ubuntu.. i experience sudden black screen and when the black screen appears it appears for forever until i restart the my computer, it happens suddenly and many times and im having this problem in ubuntu only never experienced in windows.. as i kicked of windows and using ubuntu so i am having this problem regularly. I am using Ubuntu 10.04 Lucid. Ram 512. And i am 10 days Old in ubuntu
I have an 80GB HDD where I installed Windows XP first and then Ubuntu. The thing is that whenever I shut down my computer and then turn it back on (wether it's right away or a few hours later, or the next day), I get the GRUB screen where you have to choose Ubuntu, but after that just a completely black screen. I then have to force a shutdown, then turn it back on, and it works. Whenever I restart it works too, this seems to happen only after a shutdown.
Specs: Dell Dimension 4600 P4 2.8 GHz procesor 2GB RAM ATI Radeon x1650 video card 80GB HDD
Actually when I am working on internet.. The computer closed all programs and a black screen appeared asking me login : and Password after it... later It showed me that there are some update packages ... I didn't know how to get out of that except to restart ...
i did the upgrade thru the update manager but when i rebooted my comp, my computer didnt go pass the black screen with the bar blinking. what black screen im talking about
I currently have Ubuntu 10.10 64 bit installed and I would like to reconfigure my partition so I can reinstall Windows 7 � 64 bit on my computer.
I have the recovery disk that HP sent me and I have tried Virtual Box and no luck, so just to avoid any problems I would like to spilt the partitions and set up the grub bootloader so I can have Ubuntu and Windows as a choice a start up.
Is there an easy way to do this or do I need to completely reformat my hard drive?
I recently installed Debian squeeze on one of my older pcs. I have had this computer for a long time with windows so I know there is no hardware issue. About half an hour after being turned on in Debian the computer goes to a black screen and the num lock caps lock and scroll lock keys flash.
on a 6-7 years old compaq laptop, connected to a brand new hp monitor i am having a mismatch with computer/monitor resolution.
before i had ubuntu 10.04 which could only run in x's safe graphics mode - allowing for full screen resolution but with handicapped graphics - for example videos fullscreen would be quirky and run with cpu at 100%, something which was no problem before 10.04.
then i tried ubuntu 10.10 and later lubuntu 10.10 (which had exactly the same problem); the monitor is running 1440x900 while the computer is rendering to only 1024x768 - leaving a huge black border on right and bottom of screen. the gfx is still crippled; videos fullscreen is quirky as before.
I can't seem to get Ubuntu to run on my old Dell Dimension 2300. It boots to a purple screen then it goes to a black screen with a load of writing nothing else happens after this screen. [URL] Could someone advise how I can get it to work?
I am using an old username which I have been tied to since my first install, any time I have tried to change it in the past lead to problems such as duplication of files and permission access.
I have a small / partition and a larger /home partition where I store media etc, and on freshly reinstalling Ubuntu 10.10 on / today I was tempted to use a preferred more accurate username and change the computer name - would there still have been consequences to this, if so can they be addressed post install, or can I some how simply just change my username and computer name without confusing my system from here without reinstalling?
*I carried out the re installation using my old usual username and computer name.
So I'm in need of VM'ing a couple OS's to keep from repartitioning and dual booting my desktop. The first I'm trying to boot is a 64bit version of windows (have XP and 7 disc, trying XP for now) as I need to convert some of my work's ancient programs that still use DOS functions.
I choose Virtualbox over VMware just for the sake of VB being in the repos. Install and initial config went fine, but when I try to start (run) the VM the screen goes black, then the computer completely stops responding and needs a hard reboot. Pasting what I believe to be the error part in the log. If you need the entire log I can email or host it - too big for a post. Kernel Version - 2.6.32-trunk-amd64. Debian Sid
'm trying to duel boot windows 7 and ubuntu 11.04 on an Acer Aspire 5736, but when I try to boot from the cd (which I burned with InfraRecorder) it first goes to a black screen with a blinking under score in the corner, then to a purple screen with a couple symbols at the bottom, and then the screen goes black and nothing else ever happens
After succesfully installing Ubuntu 10.4 x32 and rebooting pc hangs on black screen with a flashing white dot in the top left corner of my screen, i've tried installing it twice with the same results.
my setup is: Asus p5q-e, 4 gig of corsair dual ram, ati 4850 graphics, onboard audio. ahci mode win 7 installed on intel ssd, and xp on a samsung 320 gb sata 2, i had this configuration running fine for 2 months without boot loaders, on pc start up i choose from which hdd to boot from.
i installed ubuntu on the samsung drive where it was recognised fine, wiped it all and installed automatically.
pls let me know if there is anything i missed, and advice if possible in what to do.
I was messing around with the screen orientation and thought it would be funny to orient it sideways. Big mistake The screen went black.I can force a shutdown, login and I get the same black screen. I tried hooking up an external monitor and the monitor showed no input so I'm guessing my laptop doesn't have that capability with Fedora.This is my main computer.
Don't know if there's going to be much anyone can do but I just installed UNR to my Acer and did an update, restarted it and it went blank screen for ages, and the hard drive light went on, I assumed this was a crash so re-started the computerTried turning it back on and it again had a blank screen, no HD light, tried again same, took battery out and did the same (this has worked previously with Limpus) and no luckI don't even get to the BIOS menu.
another post about this. I just don't know how to handle this, as I'm pretty nsee the grub loading menu, but screen just freezes after, no way I can reboot, or open a console. In recovery mode I can log as root in console, though.I run Debian 6, 64 bits. I have an intel q6600 and a nvidia geforce 9800GX2.
I had switched over from Windows to Ubuntu and got rid of windows completely but still had the recovery partition and deleted it. I then tried to add that space to another partition, "Media." For whatever reason it deleted the "Media" partition so I used TestDisk to restore it. I did something wrong and when I rebooted my computer it would not boot so I used my LiveCD to check whats wrong and it had deleted all of my partitions and Ubuntu was nowhere to be found. So I used TestDisk again to recover them, this time it was successful. when I start my computer it does not boot into Ubuntu it just shows a black screen with the white underscore ("_") flashing in the corner. I'm not sure but I don't think it is booting into the correct partition, I think it would be trying to boot the first partition, /dev/sda1, rather than /dev/sda3. If this is the problem how could I fix it? I got all the boot loader information, here it is:
I'm new to linux and having a lot of problem, and I would really apprecaite the help. It all started when I connected my laptop to an LCD. Since then, my system doesn't detect its own screen. So I have to escape as the start of reboot and go to a recovery mode and select failsafe screen. Ubuntu then set to lowest graphic mode. It's no way to keep a set up for the long run. I've tried to reinstall Ubuntu from a CD but that doesn't work. .
I have Ubuntu 9.1 with wubi and Vista on my laptop. I was playing my laptop through the TV, then I tried to switch it back to computer control and the computer went black. I had to hold to power button to restart, and suddenly grub4dos starts up when I try to launch ubuntu. I can still launch Vista. Is there anything I can do to save my system? At the very least, I would like to be able to copy data from my ubuntu system to my vista system. How can I do that? I can't find C:/ubuntu/disks. It doesn't seem to exist.
Problem-PC automatically boots into a black screen with blinking cursor. No message or nothing
I have 4 HD. Primary drive has Windows Vista, Secondary no OS installed. Sata1 HD Ubuntu 10.04, Sata2 Windows 7. Prior to installing windows 7 all was perfect but once I did it, grub got all screwed up. The only way I can boot into grub is if I manually select my Sata1 which has Ubuntu on it and only then it allows me to select Linux or Windows OS. How can I change that so it can boot up normally as before? I'm assuming that grub was installed in the primary drive which has vista on it, but once I installed windows 7 it got deleted and when I tried reinstalling Ubuntu, the grub was not installed in the primary drive.
I have spent the better part of 2 days perusing these forums for assistance. Here is the short story:I run a 7 year old custom build with a 82865G Intel Chipset and a NVIDIA FX5200 graphics card. Had been running a sluggish XP and after adding 2GB of fresh RAM wished to start fresh with my old friend, Ubuntu.
I've tried 10.04 LTS with and without my NVIDIA card installed with no luck. I have successfully installed 10.04 using the alternate install, but this also goes to black. I can hold shift to see GRUB and play around there, but no luck so far. I've also tried 9.10 but have not gotten past the pulsing Ubuntu image. I've seen plenty of support for NVDIA and Intel onboard graphics chips suggesting boot commands like nomodeset and i9015.modeset=0/1...it's all falling short.
I'm heavily leaning towards just installing an earlier LTS or a different linux distro all together. If there no one can help me debug, maybe someone can suggest a distro that will make me happy.
I've installed ubuntu 10.04 onto my Dell Latitude e6510 (through the wubi installer), but I can't get anything except a black screen. I'm pretty new to ubuntu, but after a bit of looking around at graphics issues I found a bunch of boot parameters and tried different combinations of them. i915.modeset=0 Gave me the purple loading screen, until the screen went black and I got flashing caps lock and scroll lock lights.xforcevesa gave me a completely black screen -- not receiving power at all
I also tried noapci, acpi=off, irqpoll, and pci=routeirq as parameters. None of those had any success.I've also tried letting ubuntu boot with a black screen until I heard the African drums and pressing Ctrl+Alt+F1 to go into the console, but the screen stayed black then as well.
I have downloaded Last version of Ubuntu 11.04 and installed it. The installation went correctly with some flickering in display during installation. But the real problem starts after installation, when I turn on my PC and select Ubuntu from GRUB, the screen flickered a lot and then went black and PC got hanged.
After the upgrade from 9.10 to 10.04 resulted in a black screen after reboot, I decided to don't waste more time, backed up my data and made a fresh installation.
First Issue [solved]: After I inserted the Kubuntu 10.04 Live-CD and started the system, I got to the CD's boot-mode selection menu. When I selected "Install Kubuntu", I got the Kubuntu bootscreen, but the system hang up then. I was able to solve this problem through pressing F6 in the boot-mode selection menu and setting "nomodeset". I also had to remove "quit splash" from the boot-entry line. Afterwards the installation process was fine.
Second Issue: I wanted to boot my new installated system, but, off course, got the blank screen again. So I edited the Grub-entry for recovery mode in the grubmenu (replaced "quit splash" with "nomodeset") and booted into recovery mode. I selected "netroot", and installed the proprietary nvidia-drivers with "apt-get install nvidia-current". Afterwards I ran "nvidia-xconfig" to generate the xorg.conf. To solve the blank screen issue, I edited the /boot/grub/grub.cfg the same way I described above and rebooted. Now I don't get a blank screen anymore, but I also don't get an XServer. The system boots now (off course without splash and "unquit"), but drops me into the tty1... When I type "sudo service kdm start", I get into KDM and can login, but I get many errors and crash-reports there. I also don't have any internet. I only have internet when booting in recovery mode and select "netroot".
I'm a bit surprised that Ubuntu released a LTS-Version that causes so much trouble (I've searched the forum and it seems that I'm not the only one with such big problems). Has Ubuntu droped support for NVidia-users?
I tried to install Ubuntu 9.10 on one of them by default installation. For the moment there is only one user declared. The installation seems OK, except that Ubuntu didn't find my PPPoE connexion. When I logged in, I got a blank screen with the mouse cursor (it moved, but when I left or right-clicked nothing happened) and on the left something looking like two 1-pixel wide menus, as if the system had understood there were a dual screen. These menus could roll and unroll, and I think I even once managed to shutdown by going to the last invisible item thanks to the keyboard arrows (I'm not sure, because I had also clicked on ctrl+alt+suppr, so it could be a delayed effect of that).
I restarted the computer several times, to get no more than that. When I'm in Gnome safe, everything is OK but I don't have any root privilege there (I guess it's normal): for instance, I can't set up the internet connexion. My 20" 4/3 Philips screen is recognized. Then I changed the screen frequency: it's still OK for Gnome safe session, but now, in the Gnome normal session, instead of a black screen with 1-pixel wide menu, I get a black background picture with white light coming from above and reflecting to an otherwise invisible floor. The mouse cursor is moving, but this is the only thing which works.
Last weekend, I upgraded my old PC and installed Ubuntu 9.10 on a brand new pc. It worked perfectly for 5 days. When I got home tonight, it wouldn't boot and got stuck on a black screen.
[Code]...
I really am a newby here but I think that the blkid command gives me my uuid. The uuid in the /dev/disk/by-uuid directory is in blue so I'm guessing that this is a symbolic link. And then, when I try to create a symbolic link with the ln command, it already exists... But the issue is that the UUID that is referenced in the error displayed is not the same as the UUID in my /dev/disk/by-uuid directory.
