Ubuntu Installation :: Unable To Boot After Fresh Install - Screen Blacks Out?
Mar 12, 2010
I was able to boot up the live CD and install the OS to the hard disk. *Single boot.After I rebooted, the system loads up to the Ubuntu splash screen and will "eventually" move along. The problem is that once it moves past the splash screen, it starts blacking out the screen. It looks like the screen turns on for about 10 seconds and then off for another 10 seconds repeatedly. The screen blinks like this indefinitely.This is my first attempt at installing and or using Linux so I am an uber n00b.
** Also, I am able to ctrl + alt + f1 and get to the terminal so i should be able to run any commands without any trouble.
I admit that I am a noob - knows a little which makes it more dangerous than not knowing at all. in brief, I am unable to boot one of the OS out of 3 I have installed. Everything is fresh install on newly formatted partitions.
Here are the details:Two HDs - one is Sata and second is IDE. Win7 installed on IDE (sdb2) then Ubuntu 9.10 on Sata (sda2) and lastly Linux Mint on Sata (sda3). Everyone was on its place - that is - Ubuntu 9.10 on sda2, Linux-Mint on sda3 and Win7 on sdb2.
Future of the day was bright and promising until I upgraded online to 10.04. After that, I was only able to boot to Win7 (IDE drive - sdb2 - not sure if it changed at that point or not) but no nix OS on Sata sda2 & sda3. I downloaded 10.04 and installed from CD again on sda2. Well, now I am able to boot into Win7 and Ubuntu 10.04 but no Linux-Mint. Another interesting thing is that sda and sdb have interchanged/swapped. So now if I chcek it thru gparted or run boot script, Sata drive shows up as sdb and IDE is now sda. In another post, I read that grub2 does that and make IDE drive as the first drive and Sata drive as second. Well, I buy that but why I am unable to boot to second OS on the same Sata drive? Evidently, I am missing something and I take that it is mostly user error but please
I have some proprietory softwares installed on WinXP so it is very important for my work that it is up and running.
I performed a FULL INSTALL from the Live-CD (10.10) and installed grub on the windows partition. Now whenever I try to select the Windows option in the Grub menu, the screen goes blank and it gets me back to the Grub menu.
So I currently have an install of Karmic running that has been upgraded over the years but I am repartitioning my drives so I did a fresh install on a new drive.
My first problem was the live cd would not boot and I had to use the alternate cd to do the install. It would boot into a blank screen and the i915.modeset=0 kernel parameter did not help.
After the installation finished I went to try and boot and found that right when it went to initialize the graphics, my computer locked up hard. Keyboard unresponsive and all. I read the forums and I tried using the kernel parameter i915.modeset=0 and removed quiet and splash from the kernel line to see if I could spot any errors but nothing appeared.
I am able to boot into recovery mode, and I tried even running an apt-get upgrade to get all my packages up to date and installed the latest nvidia driver but still have this issue.
I'm at a loss as to what I should attempt next.
Here is boot info, just to clarify sda and sdb are a fakeraid on my old setup, sdc is my new install
I boot up after a fresh install and I don't get a boot splash screen. I really cant find a way to fix and some times it does not go to the login screen.
After installing Fedora 15 from LiveUSB and rebooting it just hangs on a black screen with a blinking cursor (underscore) in the top left of the screen. If it's reached grub, it isn't responding to any commands, and mashing several key combinations (such as ctrl-alt-f1) will produce a beep usually emitted only by the BIOS (hinting that it may never be making its way to grub).
The only particularly interesting thing about the install is that by default it wanted to boot itself from the MBR on my primary-master (Windows) disk. Instead I selected the option to boot from "the first partition in sdb1", which is my primary-slave (Linux) disk, (the first partition being /boot). This way I can change which OS boots by changing the boot order in my BIOS, and so avoiding bootloader wars.
I am installing Kubuntu AMD64 10.04 on a 500GB Hardware raid1. After the install completes, the computer will try booting, but grub says "No such disk."
The motherboard specs are Here,
I have tried installing to this raid three times, each returning the results mentioned above. Does anyone know what is going on?
I installed F12 with the i686 KDE livecd. A black screen with a blink "-" appeared after the bios information on the first reboot. The computer does not respond to any key input except "ctrl+alt+del", which restarts the computer.The machine is a dell inspiron 6000 with inboard 915gm video card, and the bootloader was written to the harddrive mbr. Any help would be highly appreciated.I need to be more clear. Installation went fine, problem appeared on the first reboot.
My laptop: MSI AMD Athlon 64x2 Nvidia GeForce GO 6100.
I've done a fresh install of Ubuntu 10.04 and I end-up with a blank screen. I've also tried a fresh install of Xubuntu 10.04 and Kubuntu 10.04 and I get the same blank screen.
Ubuntu 9.10 was working perfectly though. So what do you think happened?
I installed the Ubuntu 10.04 livecd on my desktop and it works perfectly so I think it is not a burning problem.
I downloaded and burned Ubuntu from ubuntu.com (64bit version) while in windows 7 64 i popped the install disc in, and it went into a setup in which it installed it asked to reboot, and I allowed. upon reboot boot I could choose either Windows or Ubuntu, so I picked ubuntu and off it went. It started to boot into the (Ubuntu) OS, it shows the little ubuntu thing, then the display goes black, like there is no signal to the monitor. The PC still runs, and reconizes when I plug in an iPhone or something, there is just a black screen though. I would like to know how to go about fixing this?
I just did an install of 10.04 from a CD. Now the mouse pointer has to be slightly above a button to click on the button. Also, the bottom bar of the screen is just a thin line and you can't see any of the controls on it and the top bar is too thick, with empty space about the menu items. It is like the whole screen is pushed down slightly.
There is nothing wrong with the monitor or the mouse because it all worked fine with 7.10 ubuntu, which was on the computer before I did the fresh install from the CD.
I just setup a Fujitsu s6231 lifebook with Lucid. When I boot there is no grub menu unless i press the "start" key. Then the only way i can get into the machine is by entering into recovery mode and booting in "safe graphics mode".
Everything works fine once I am able to log on the "safe graphic mode".
If i don't press the "start" key the ubuntu logo will flash for 3 seconds and then the screen goes blank and nothing happens.
Ok, I booted with the live cd and used Fdisk to delete all partitions and wipe the drive. I used the "Replace existing Linux system" install option and let it roll. So I reboot to the screen Flashing a _ then just black...System Info:GIGABYTE GA-EP45-UD3L LGA 775 Intel P45 ATX Intel Motherboard Intel Core 2 Quad Q6600 Kentsfield 2.4GHz 2 x 4MB L2 Cache LGA 775 Quad-Core Processor MSI R4850-T2D512 Radeon HD 4850 512MB 256-bit GDDR3 PCI Express 2.0 x16 HDCP Ready CrossFireX Support Video CardSeagate Barracuda 7200.10 ST3250410AS 250GB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard DriveKingston HyperX 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500) Dual Channel Kit Desktop Memory Model KHX8500D2K2/2GRYes i did just copy my old newegg orders I'm brand new to fedora as well so I apologize if this a newb mistake.---------- Post added at 05:54 PM CST ---------- Previous post was at 03:41 PM CST ----------Update: I went and wiped the drive again and tried a different install method (use entire drive)After rebooting i spammed esc and got into grub and loaded fedora in nomodeset After going thro all the lisence and reg stuff it prompted me to log in, I did and once again im left with a black screen with a _
I installed Xubuntu (Karmic 9.10) several times on an old iMac G3 with powerpc processor. Previously I had installed versions as 6.06 and 6.10 succesfully. But no luck this time. All installs were succesfull if alternate cd's were used.
The problem is that when i boot up i see the bootloader 'yaboot' and after that shortly the mouse logo from Xubuntu. After that the screen turns black and the indication light from the powerbutton turns from green to orange, this means no signal (i guess).
I assume that my screen resolution is wrong and cannot be displayed, the Mac uses 1024x768 if i am right.
My question is : How to access any configuration file to change resolution as I believe is the problem?
Edit: Perhaps there is a way to access command line to change config files.. ? Or using a live CD, but this computer is low on memory and has a hard time using live-CD's.
I've installed a fresh Debian amd64 DVD version on my small HP Compaq 6537s / AMD Athlon X2 / 64. Everything went fine, I rebooted, the graphical login screen appeared, so I thought I will be able at last to run Debian on a computer ...
But then after login, the login Window disappeared, the "Debian" logo too, and... that's all folks! A nice blank screen. But the mouse is still perfectly drawn, so it's kind of weird.
Here's what tells me "uname -a" :
Linux olivierdebian 2.6.26-2-amd64 #1 SMP Sun Nov 21 09:17:22 UTC 2010 x86_64 GNU/Linux
If I go to CTRL-ALT-F1, i login as root and I do a "/etc/init.d/gdm restart", I have the login screen back and this is once again the same scenario: login => ok => blank screen with mouse properly drawn and the Debian background color still there.
I've now tried several times to install a fresh copy Fedora 13 i386 on my old Dell laptop, but each time I reboot the laptop I get the first-time welcome screen which asks you to create a user. When I re-enter my user info, it tells me that there's already a folder created for that user. After rebooting, I'm back to that screen. Does anyone know what's going on here?
I need to re-install ubuntu but I also have windows on the same computer(GRUB). Can I just boot from cd? Is there and option in the live cd for reinstalls or do I have to destroy the partition?
Recently freshly reinstalled ubuntu 10.04 on a new / blank hard drive and it now crashes on startup. Quick version: I have a nvidia Quadro NVS 295, it gets to the point just after the bios with the flashing dash, seemingly tries to init xserver / gdm then crashes. Keyboard lights go off but the pc stays on, and just sits there with the monitor in power saving mode. Tried in recovery mode, the blue / grey ascii terminal thing pops up for less then a second then the display crashes in the same way.
Swapping with an ATI card borrowed from elsewhere, the new install will boot quite happily. Anyone know how I can get 10.04 to boot with a nvidia quadro NVS 295? Its a bog standard card and my version of 10.04 I upgraded to on my old hard drive works fine. ts a reasonably new dell XPS 64bit pc.
Longer version: I run 3 monitors using a PCI-e x16 NVS 295 and a PCI NVS 295. This worked great under 9.10 and 10.04. Boss gave me a solid state HD so trying to install 10.04 on that. However on my first install attempt the live CD failed to load (same problem as above, gets to init'ing the display and crashes with no output). I removed the second PCI card to run with just the 1 PCI-e x16 nvidia card, this time the live CD worked fine and I could install, but I am stuck on the boot problem. Booted into the system using the ATI card and did an update just incase something may have changes / been fixed but the issue persists.
I have a Sony Vaio PCG-k195hp laptop, in which i've installed Ubuntu 10.04. Before installation i tried the Livedisk environment to make sure that everything would work out okay.
The results were fine, ubuntu even got the onboard Wireless card working which was causing problems in windows. But after the install ubuntu has become erratic. It sometimes boots and does a lot of work but other times it'll boot and freeze as soon as i move the mouse, or even earlier. I am pretty certain the CD was not the cause as i've already used it to install 10.04 in another system and i'm writing from it right now. I got the 10.04 iso on the day it came out and thought that maybe it wasn't complete so tried updating my install, but it had an error during the update installation.
Now even the live CD won't work as it hangs in the loading screen.
After buying a new PC, I decided to "reorganize" my former PC as follows:Initially it has been a dual (SATA) disk dual boot PC- one disk for each OS, while XP was fully installed on a single NTFS partition. Using Gparted I shrunk the XP partition, and created some Linux partitions. I've verified that the XP partition (sda1) is bootable. Afterwards, I removed the other (former Linux) disk from the computer. While doing so, I had to temporarily disconnect cables from both drives. Finally, I fresh installed Mint 9 (Ubuntu 10.04 derivative), on my pre-prepared Linux partitions. Installation completed flawlessly, and during the install, I've noticed that GRUB2 has been installed on sda. Rebooted and got "Disk boot failure" error.
I've checked the BIOS and noticed that the (single) drive was not recognized. I manually tested from the BIOS and located the drive as IDE3. Saving the new configuration (F10) and rebooting- the HD gain is not identified (the CMOS battery is fine- keeps time).
Booting a live CD I can see and access all above partitions.
When Movie Player is started the screen blacks out for several seconds, returning my screen to normal with no change in resolution. My system makes use of the ATI Radeon X1350 Pro with the X.org opensource "radeon" drivers. Has anyone else experienced this glitch?
Every time I start up Docky, it blacks out the bottom part of the screen, and gives me a notice that says, "Docky requires compositing to work properly. enable compositing and restart Docky." How would I do this?
System is hanging during boot after a successful fresh install via netinstall disk. Never makes it to any GUI or prompt. However, it does still respond to CTRL-ALT-DEL (not completely frozen).Default debian installation with one exception - KDE checkbox was checked for installation. Everything else was default, with "use full disk with GRUB" option chosen.The boot process appears to hang during the service starts. It appears that the start job for "Create Static De..." is not actually ever completing. I don't know how to troubleshoot that any further than I have.
This is running on hardware, it is not a virtual machine. 480GB SSD, i7, 16GB of RAM, AMD R9 390 (I dunno if this is the problem, but it seems a likely culprit).There are no other disks attached. I have verified successful memtest completions (0 failures) and hard disk is intact and working fine (I have swapped for another disk, and the same thing happens as well).
My skill level with Linux is relatively low. I have proficiency using it and programming for it, but not much in the way of troubleshooting/ installation/ drivers.
Here is an album of "screenshots" (phone photos) of the boot sequence in debug: URL....I tried booting straight to console by removing "quiet" from boot options and changing to "text", but it does not alter the outcome in any discernible way.
I'm stuck with installing Fedora Core I have 2 hard drives both 80Gb I want to install a fresh copy on one of the drives to do a dual boot I have vista on the main hard drive this is where I am at Installation requires partitioning of your hard drive by default, a partitioning layout is chosen which is reasonable for most users. You can either choose to use this or create your owe. Select the drive to use for this installation?
I had ubu 904 and vista installed on an 80gb drive, i had a spare 80gb drive also. I setup a raid0 config in my bios, then installed ubu9.10 onto it. All was fine until the very end, and then it said grub failed to install.
So i rebooted, and im left with a blinking cursor. How do i install grub? Ive installed ubu a few times now and never had an issue so now im lost.
I want to properly install Unbuntu on my multi boot pc. I would like to install to E partition which is currently ntfs. I have never installed Linux. What drive should the boot loader go? I can format E partition during install? Does it still need a swap file partition? If so, can that be made from E partition? How big? I'd like to have a boot menu to choose Ubuntu or a choice that takes me to the windows boot loader. Would that boot loader get wiped if I did a fresh install of 7 to the I drive? Also, what would be the proper way to upgrade Ubuntu? I see a lot of post where people are doing it wrong.
Here is my drives layout. Should install Ubuntu to my SSD J drive instead? I tried the live CD. Seems to work well. I have a Asus Max Formula MB, Phenom II 6core, ATI 4870. MB has a built in Via sound card. Not sure if that was working.
Followed steps 2-5 and purged/reinstalled grub now it boots as it should, NO idea where it was messed up.[URL].. I had 9.10 running in raid1 and upgraded my hardware (cpu, mb, memory etc) and wanted to do a fresh install of 10.04 to get updated. After following the various guides online such as [URL]...It begins to load grub and drops to a "grub> " shell. Which I have to do the following to get it to boot.
Code: set root=(md1) linux /vmlinuz root=/dev/md1 ro initrd /initrd.img boot
Then it boots up normally and I can use it like any other desktop. I've been over my grub.cfg and /etc/defaut/grub files and cannot find the issue. At this point I'm wondering if the fact it's a raid1 setup is keeping grub from finding it's files.
I have installed UNR 10.10 on an Asus Eee 900. NO matter how I set the power preferences, the screen blacks out after a few minutes of idleness, and to recover I have to enter the password. This is infuriating and there must be some way round it, but I cannot find one.
Fc11 installed well, it was related to a particular sata driver perhaps The installation went well up to the reboot, and then displayed the message saying that LogVol00 was not found. 3ware sata raid card, usually it installs without error
I've run the install to hard drive program three times over and each time I get "disk boot failure". I believe I've got Grub to install to the mbr but I am not sure.
System: Barton 3200+ with 1GB of DDR1 Asus A7V333 High Point hard disk controller
other items
All the hard drives are hooked to the High Point controller. It recognizes all of them that have power hooked up and read/writes to them. Two have 98SE installs, the third is where I'm trying to install Fedora 12 to get away from some problems I'm having with 98SE.
The BIOS is set up to boot from the "SCSI device" which means it's booting from the High Point controller. The High Point lets me set a boot mark, which, when set to the Fedora drive, yields the disk boot failure no matter what I do to it.
