Ubuntu Installation :: Auto Etho Not Working In 10.10?
Jan 3, 2011
I'm running Ubuntu 10.10 on Macbook Pro 2,2 hardware. It stills picks up wireless internet (but cannot connect when the networks only have one or two bars...) but the ethernet won't accept a cord. It registers that a cord has been plugged into the computer, but will not connect to the internet via it.
I'm currently running on a live CD of Ubuntu 9.04, and the ethernet cord works fine, so it's not my hardware I'm worried about. (The change in registering cords came about after I re-installed Ubuntu after I wanted to switch to pure Ubuntu rather than running a dual-boot system.) It's something to do with the networking program I have on the system.
View 4 Replies
ADVERTISEMENT
Mar 1, 2011
i earlier had windows xp installed on my personal computer..
when i plugged in my LAN cable..
it always showed "limited connectivity"..
then i had to repair it..
but now..
when i have installed Ubuntu 10.10..
it seemed to work fine for around 2-3 days..
but now..auto etho does not connect..
View 7 Replies
View Related
Mar 23, 2011
Just installed win7 next to ubuntu 10.10. on a newly purchased Dell inspiron N5030. Win 7 wire and wireless both work. In ubuntu , my wireless works. but cannot get the wire to work.I just ran ifconfig and found out i have nothing in the ethO at all.How do i put it in.
View 1 Replies
View Related
Apr 22, 2010
Wan (mail) is by way of wireless internet into a linksys (PPPoE) 192.168.1.1 router and then only to the mailserver into etho0 192.168.1.3. Mailserver also has etho2 192.168.1.2 connected to a switch that has 3 pc's attached and an adsl router for pc internet access. Server does not provide proxy for pc's. Just mail. Linksys is 192.168.1.1 and can be seen by the isp provider. The server wan is 192.168.1.1 and can ping to 192.168.1.1 and can browse the net via linksys. The lan connection is 192.168.1.2 and this should be visible to the pc's but it doesn't appear to be and can't ping a pc although the switch lights show it is connected.
etho0 192.168.1.3, 255.255.255.0 & default gateway 192.168.1.1
etho2 192.168.1.2, 255.255.255.0 & nothing for default gateway.
DNS is blank for hostname and primary dns is 192.168.1.1. secondary, tertiary and dns search path are all blank. Should there be a default gateway for etho2 even though it only has a lan connection ? If I gave it the adsl gateway then how would the server know which card to use for outside access?
View 6 Replies
View Related
May 21, 2010
Cannot activate network device eth0!" device eth0 does not seem to be present, delaying initialization". i cannot find my network card while i set up network configuration
View 8 Replies
View Related
Nov 18, 2009
I'm stumped here as it seems like after an update etho:0 has assigned itself 2 x IP Addresses. I don't understand how this happened or how to fix it so some help would be great as I cannot access cPanel while it's like this or my sub directories.Here is a print of ifconfig
-bash-3.2# ifconfig
eth0 Link encap:Ethernet HWaddr AA:01:5F:9A:FE:26
inet addr:95.154.254.38 Bcast:95.154.254.38 Mask:255.255.255.255
[code]....
View 4 Replies
View Related
Dec 10, 2010
I'm not able to set up eth0 with a static ip adress.service network restart and it was okkay but when I try to turn off and turn on, the ip adress is set up with dhcp.
View 7 Replies
View Related
Mar 7, 2010
I got a problem about network proxy setting. With the graphics setting interface, I set auto proxy with the URL address but it is weird that the setting only work with eth1(wireless), doesn't work with etho(wired). however my wireless driver is always a problem for Linux. i also tried export http_proxy= XXXXX:8080 it still doesn't work at all.
View 2 Replies
View Related
Jul 6, 2010
I've brought a friend over to linux from windows. He has some how deleted his "Wired Etho" connection. He said his computer would not shut down(Mint Linux 9), so he unplugged it. You guessed it right after restarting no internet. After checking under "Network Connection" his wired connection is gone. My question is? How to reconfigure a "Wired Etho" connection? He has a dsl connection running a Linksys router(sorry I don't know the model number). I have only talked with him on the phone, so I have not personally checked the system out. I just finished working on it this past sunday and everything was fine.
View 3 Replies
View Related
Jun 7, 2010
i have problem related nici am using a dell inspiron 1545 laptop outputs are following---(1) [root@localhost ~]#lspci |grep -i ethernet 09:00.0 Ethernet Controller: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller (rev 13)
(2) [root@localhost ~]#cat /etc/modprobe.conf
alias scsi_hostadapter ahci
alias scsi_hostadapter1 usb-storage
[code]....
View 1 Replies
View Related
Aug 30, 2010
I installed the Autocomplete plugin http:[url].... for gedit and it works great. But when I ran it as root "sudo gedit ...", Autocomplete is not on the list of plugin and the auto complete function is not working.Is it possible to make the plugin available to all users?
View 5 Replies
View Related
Dec 30, 2010
A very annoying bug has been around for some time now. Auto-complete in the address field on Firefox does not work after Ubuntu resumes after screensaver. What I have to do is to minimise the browser and then maximise it again... it then auto-complete as it should. Surely I cannot be the only one noticing this? I'm on Ubuntu 10.04 and Firefox 3.6.13.
View 5 Replies
View Related
Jan 21, 2011
I have a movie CD which works on windows but not on ubuntu. It has vcdplay.exe. (Probably that is the reason it doesn't work on ubuntu) I tried with wine roxio. Doesn't work. I have tried with xine,gxine,vlc and movie player. Inside the vcd, it has an mpegv folder. Inside the mpegv folder there is file avesq.dat. I tried copying it on to desktop, but it wont copy properly and I can't rename the file to just avesq instead of avesq.dat.Any idea how can we make such an auto run CD work on ubuntu?
View 2 Replies
View Related
Apr 22, 2011
my wired auto ethernet stopped working. It doesn't appear to be my machine or the hub as the connection is fine using windows on the computer.I'm a bit clueless on the Networking front in Ubuntu. I've brought up the Network Connections box and checked that the Mac address is correct (and it is). I've tried it on Lubuntu and Openbox, but still no luck. The only oddity I see is that the Network Connections box says that the auto ethernet connection has never been used .
View 9 Replies
View Related
Oct 24, 2010
I'm using Easytether through my HTC Droid for interwebs running Ubuntu 10.04. However I also have a home network. However when I hardwire into the network via a D-Link router (Auto eth0) my internet no longer works. The same is true when I plug in my iPod. The Droid loses it's connection. What is the problem?
View 2 Replies
View Related
Nov 13, 2010
I have this ubuntu machine that lives under my desk and is basically a utility machine. Mainly I ssh to it and get synchronize/backup files, etc.
When I reboot, for some reason the auto mount for my usb drives doesn't work until I actually hook up the monitor and log in to the gui. When I ssh in after reboot, I'm unable to access my USB drives! "Not Authorized"
I'm not sure how to mount a drive from the command line... really I just want the machine to auto mount the drives when it starts up... gui login or no.
View 4 Replies
View Related
Jan 26, 2011
I've installed Lubuntu on a Packard Bell EasyNote W3344 D. lsusb displays the usb pen, however it's not automounted. All three options under pcmanfm --> Preferences -- Volume Managment is ticked. I've tried two different usb pens, both formatted fat32 and confirmed working on ordinary Ubuntu. I should add that I previously installed Mint Fluxbox, but eventually reinstalled (choosing Lubuntu) because I wasn't able to enable auto mount of usb pen. Both /mnt and /media remains empty after insertion of the usb pen. Auto mount of optical drive is working properly.
View 3 Replies
View Related
May 18, 2011
I had on all previous versions of ubuntu this feature checked - the apps which were opened before I logout would automatically start next time I start my laptop. After upgrading to 11.04 this does not work anymore - How to restore this feature?
View 3 Replies
View Related
Jun 5, 2010
When i double click the ntfs drives in "computer" it shows "Invalid mount option when attempting to mount the volume 'Vista'. "
View 12 Replies
View Related
Sep 8, 2010
I'm using Red Hat in a work environment as the system that runs my Netbackup. My predecessor was using 1Tb Western Digital external HD's and they worked great but now were upgrading to 2Tb drives and I have to format them and make sure then work correctly.
I have been able to format them in Red Hat and they have worked with Netbackup however the only way I can get them mounted is by having them plugged in and then restarting the whole system. The older drives are completely plug and play.
Here are the steps that I have been following;
Then I set the file system type with;
Next I create the new filesystem on the drive with the command;
Then I finalize the format with;
Followed by a restart, which of course the drive comes up. But if I unmount the drive and remove it and then plug it back in nothing comes up. Trying to manually mount it doesn't come up with anything. I have attempted this with 3 different brand new Western Digital external HD's.
I've looked in the fstab and when I plug in the old hd's it comes up with the command to mount it. With the new one's its not there unless I do the complete system restart.
View 5 Replies
View Related
Jan 15, 2010
I've got an annoying problem that 'man' and some other commands do not auto-complete (via TAB). e.g. typing: man rsyn (TAB, TAB, TAB, etc) will not auto-complete to 'man rsync' however, if i 'sudo -s' & then try the above, 'man' auto-completes everytime. (Directories always auto-complete successfully) My ~/.bashrc contains:
Code:
# enable bash completion in interactive shells
if [ -f /etc/bash_completion ] && ! shopt -oq posix; then
. /etc/bash_completion
[code]....
View 8 Replies
View Related
Jul 22, 2010
I'm using fedora 13, and it's been a while that yum auto-update doesn't pop up.Some time ago, when updates were available, a notification popped up asking for update (and I love this feature because I didn't have to check manually).Under System>Preferences>Software Update i've Daily check for updates and weekly check for major updates, with no automatic installs.And doing System>Administration>Software updates, it load and updates correctly, just it's no longer automatically checked.
View 8 Replies
View Related
May 20, 2011
I am using Debian 6.0 and I am trying to auto login into Debian 4.0. I generated rsa keys with ssh-keygen on Debian 6.0 and I copied id_rsa on Debian 4.0 in /root/.ssh/authorized_keys. When I tried to ssh from Debian 6.0, ssh is giving the following error and asking for password. how can I solve the problem to perform autologin?
Error: Agent admitted failure to sign using the key.
View 1 Replies
View Related
Apr 30, 2010
i am using ubuntu 8.04 and i am facing a problem of mounting external pen drive, exernal harddisk or even other /dev/ partitions in my login mount is not working so i manually mount the partition by mount command .. but i dont know how i can resolve this problem ...
fdisk -l currently returns as
Disk /dev/sda: 160.0 GB, 160000000000 bytes
255 heads, 63 sectors/track, 19452 cylinders
[code]...
View 1 Replies
View Related
Jul 11, 2010
I just installed Linux for the first time and I'm having some internet connection issues. I am running Linux Mint 9 on my HP 210 netbook. I am unable to connect to anything using NetworkManager 0.8's automatic configuration. I can't even ping my other computer. Both computers are connected to my cable modem by a switch. The other computer (the one I'm on right now) is running Windows Vista and is working fine.
eth0 is getting an IPv6 address assigned to it, but no IPv4 address. When I do dhclient (I'll include it at the bottom) it says no DHCPOFFERS received and then makes another adapter called eth0:avahi with an IP of 169.254.9.78, which I think I understand from what I read is just a default.
I noticed when I looked at the ipconfig results from my Windows computer that there were a number of things called tunnels on there. My ISP is cox, and I saw some other people with cox had the same setup. One of the tunnels seems to make it so IPv4 and 6 can coexist. Could that be a problem? When I asked Cox why it was set up that way they helpfully referred me to wikipedia.
Here are my ipconfig (from windows), ifconfig, and dhclient results. Let me know if I can provide any other information.
Windows IP Configuration
Ethernet adapter Local Area Connection:
Tunnel adapter Local Area Connection* 6:
Tunnel adapter Local Area Connection* 7:
Tunnel adapter Local Area Connection* 12:
Internet Systems Consortium DHCP Client V3.1.3 Copyright 2004-2009 Internet Systems Consortium.
All rights reserved. For info, please visit https://www.isc.org/software/dhcp/
View 1 Replies
View Related
Mar 30, 2011
I am currently running a VPS with Ubuntu Server 10.10. I have been trying for a few days now to get some programs to run when the system starts, but with no luck. I am trying to use rc.local to do this, there is an:
/etc/init.d/rc.local - http://paste.monsterprojects.org/mpbjhwhbjzhbjrr (Was already on the system, I have not edited this)
and:
/etc/rc.local - http://paste.monsterprojects.org/mpbjhwhbkkkhwez
If i run the /etc/rc.local script manually all the programs start fine, and if i run /etc/init.d/rc.local start, all the programs start fine. But for some reason they just don't seem to be starting when the system boots.
View 3 Replies
View Related
Sep 12, 2010
I installed Fedora 13. I edited my fstab to automount my NTFS-3g drive. It worked. Then I updated to Kernel 2.6.34.6-54.fc13.x86_64 It doesn't work any more.
On boot-up I get the following error (already showing in the login-page):
Code:
Here my fstab:
Code:
The directory /media/Data continues to exist.
View 11 Replies
View Related
Apr 19, 2011
I understand that Fedora 14 using automatic printer detection. When i plug in my Epson DX4450 printer nothing happens and i can find no way to configure the printer. This has never been a problem with any other linux distro. How can I correct this problem? Why does auto printer detection not work?
View 3 Replies
View Related
Mar 5, 2011
I stuck a flash drive into a usb port this morning, and the device notifier failed to show. I opened Dolphin, and I noticed that nothing that should be mounted was showing up in the left pane. I always have seen my Windows install, as well as another partition that has Slackware. I can navigate to /mnt/vista and its all there. I can also go to /mnt/Slackware and its all there. However, the flash drive does not show.I can manually mount the drive and all is well as root. I can't even tell you when this started. I am using Alien's 4.6 KDE packages with all the deps. I just opened mc and checked everything. HAL is disabled and has been for a long time. All did work after disabling HAL.Its not just the flash drive, it effects anything - music cds, blank media, nothing works automagically. Google hasn't
View 9 Replies
View Related
Mar 29, 2010
When I installed slackare 13 it detected usb drives and cameras automaticallyow it doesn't. I am runnning a 13.0 system, not current, so I have only applied the updates in that branch (iirc including a new kernel).nowadays when i plug a device in it does not seem to be detected by HAL (i.e not in KDE).However the device is listed if you use the command "lsusb" and the computer obviously knows it has been plugged in as there is a relevant entry in dmesg.Sorry for the generallised nature of the post, but I don't really know anything about HAL or how it can have stopped working
View 1 Replies
View Related
