i earlier had windows xp installed on my personal computer..
when i plugged in my LAN cable..
it always showed "limited connectivity"..
then i had to repair it..
but now..
when i have installed Ubuntu 10.10..
it seemed to work fine for around 2-3 days..
but now..auto etho does not connect..
I'm running Ubuntu 10.10 on Macbook Pro 2,2 hardware. It stills picks up wireless internet (but cannot connect when the networks only have one or two bars...) but the ethernet won't accept a cord. It registers that a cord has been plugged into the computer, but will not connect to the internet via it.
I'm currently running on a live CD of Ubuntu 9.04, and the ethernet cord works fine, so it's not my hardware I'm worried about. (The change in registering cords came about after I re-installed Ubuntu after I wanted to switch to pure Ubuntu rather than running a dual-boot system.) It's something to do with the networking program I have on the system.
I have noticed that a common issue to several distros is the fact that the networking subsystem doesn't automatically detect the link if an ethernet connection is disconnected and then re-connected to the NIC after boot. If the ethernet cable is connected after the system is up and running, nothing happens - ethtool eth0 shows link detected: no, and you have to restart the network service to let the NIC know that there is in fact a link, and actually connect. I have a Fedora14 (KDE) box with a brand new Asus motherboard with embedded NIC. Everything works great except the auto-detect of a freshly connected ethernet connection if the link is down to begin with.
Am I missing a ethernet link sentinel utility or something, or is this just the way linux works? I have done plenty of research on plenty of posts, and it seems this is a common problem, with no solution other than manually or programatically restarting the network service in a script to detect the link after a disconnect.
I press On-button, Debian boots, logs in and automatically connects to the Wireless network AND! to my local pc via LAN. It runs an ssh server, so I can ssh into debian over internet and communicate with the local pc (send a magic packet).Here are my problems:
1) I don't how to log in automatically. This and this doesn't work.
2) I need a network tool that can manage multiple connections and has a reconnect feature. With the default network manager I cannot even connect to more than one network simultaneously although I have two network devices of course.
And I guess I can run all that in console mode, right?
Just installed win7 next to ubuntu 10.10. on a newly purchased Dell inspiron N5030. Win 7 wire and wireless both work. In ubuntu , my wireless works. but cannot get the wire to work.I just ran ifconfig and found out i have nothing in the ethO at all.How do i put it in.
View 1 Replies View RelatedI have searched for an advanced network mangager, like the one available for Nokia's Maemo with no luck.
I want to automatic connect my x200 laptop to a VPN connection When I am home on my LAN (eth0) and when I am using certain Wireless networks.
I don't want to use my VNC connection everytime I connect to the internet, just on these networks, so I wont mark the checkbox in the vpn settings.
I just downloaded the lastest version of ubuntu to my compaq laptop. I then proceeded to plug in my ethernet cable to establish an internect connection. Under wired connection, it says auto etho1 but, the computer will not connect to it and I have no internet connection.
View 9 Replies View RelatedI just installed the XBMC from the XBMC live CD. I want to configure it in a way to auto-connect to internet. (my router is wpa-password protected.)
i know how to save the password and auto connect to internet from gnome GUI but not how to do it from command line. what should i install, change or configure in order to auto connect to internet? (using command line)
I am running 11.04 and have a netgear USB wireless NIC. When I am logged in I can connect to the wireless network through the USB adapter without any problems.I wish to use the machine as a part time home server and so have installed samba, LAMP etc however when I start the machine the NIC is not activated until I have logged in.
In the past I have done this but only ever over a wired ethernet connection, never wireless? Can some one please point me in the right direction?
Wan (mail) is by way of wireless internet into a linksys (PPPoE) 192.168.1.1 router and then only to the mailserver into etho0 192.168.1.3. Mailserver also has etho2 192.168.1.2 connected to a switch that has 3 pc's attached and an adsl router for pc internet access. Server does not provide proxy for pc's. Just mail. Linksys is 192.168.1.1 and can be seen by the isp provider. The server wan is 192.168.1.1 and can ping to 192.168.1.1 and can browse the net via linksys. The lan connection is 192.168.1.2 and this should be visible to the pc's but it doesn't appear to be and can't ping a pc although the switch lights show it is connected.
etho0 192.168.1.3, 255.255.255.0 & default gateway 192.168.1.1
etho2 192.168.1.2, 255.255.255.0 & nothing for default gateway.
DNS is blank for hostname and primary dns is 192.168.1.1. secondary, tertiary and dns search path are all blank. Should there be a default gateway for etho2 even though it only has a lan connection ? If I gave it the adsl gateway then how would the server know which card to use for outside access?
How does one get the wifi to auto connect upon start up, instead of having to manually select it every time i log on? I think the following script is what i need but im not sure where i would even need to install it.Automatic WLAN Picker Script
View 4 Replies View RelatedUpgraded To Ubuntu 10.04 The Other Day. And when I first installed it everything worked great except for my sound card which I fixed. But there was no problem with connecting to my Router via an Ethernet cable. Then I updated the video card drivers, restarted my PC and it wouldn't connect. It would try over around 1-2 mins then tell me its disconnected. No green light activity on the router / network card either.
I've reinstalled fresh copies of Ubuntu a couple of times now, Hoping to get the default settings back. But nothing has worked since.
I looked around the net and found quite a few people had this problem on previous versions of Ubuntu but it would seem most of there fixes were for there Version, so it hasn't helped me.
Heres some info:
ifconfig:
I've tried all the various things from dhclient to ifup/ifdown etc etc.
I've been trying to get and old PCI wireless card to work on Ubuntu 10.04. The card is a Zonet 1602. It was not recognized automatically.
I have been able to get it to work using ndiswrapper except that when the computer is started it does not automatically connect to the network. I can click on the network icon and select my network from a list and it will connect, including properly authenticating the network key.
I have worked through a lot of information on the web but much of it seems to apply to earlier versions of Ubuntu and some if it does not match what I'm seeing in 10.04.
There is a built in Ethernet controller on the mother board but I have disabled it in the BIOS.
Im using a Samsung R420/R470 laptop with Broadcom bluetooth and a Prolink PMO624B mouse.My mouse works when I add it as a new device, but if I off the mouse and on it again, the mouse does not auto connect. I have to press and hold the connection button under the mouse and reconnect to the mouse.The mouse says that it is linux compatible, so I guess its a problem with my bluetooth drivers.
View 3 Replies View RelatedWe just got a new router and ubuntu wouldn't auto connect to it. When I tried to click on the network manager icon in the panel, it was all glitchy and wouldn't work. Then, I removed it from the panel thinking I could just add it on again. I was wrong. Is there any way I can unremove it?
View 3 Replies View RelatedI am checking something out in my connection and I just wanted to ask, is there a way to auto-disconnect and connect from the internet.For example say I want to disconnect now and reconnect to the internet in 0.05 seconds, is there any program that does that on Fedora Linux?
View 1 Replies View RelatedI am checking something out in my connection and i just wanted to ask, is there a way to auto-disconnect and connect from the internet, for example say I want to disconnect now and reconnect to the internet in 0.05 seconds, is there any program that does that?
View 1 Replies View RelatedCannot activate network device eth0!" device eth0 does not seem to be present, delaying initialization". i cannot find my network card while i set up network configuration
View 8 Replies View RelatedI'm stumped here as it seems like after an update etho:0 has assigned itself 2 x IP Addresses. I don't understand how this happened or how to fix it so some help would be great as I cannot access cPanel while it's like this or my sub directories.Here is a print of ifconfig
-bash-3.2# ifconfig
eth0 Link encap:Ethernet HWaddr AA:01:5F:9A:FE:26
inet addr:95.154.254.38 Bcast:95.154.254.38 Mask:255.255.255.255
[code]....
I have a Broadcom 4312 wireless chip. I have use the STA drivers that Ubuntu recommends. I can connect quite easily just by clicking on the icon, so this is more than a niggle than a problem.
My network isn't protected as we live in the middle of nowhere (quite literally) and network theft isn't a problem. We also run a self-catering cottage, and let guests have free access to our network anyway, so it is easier for guests to access our network without me having to give them all the key. When I did use wpa, it would start itself up with the laptop, so I kind of know that this might be the cause. Is there any way I can fix it without encrypting the network?
I have installed ubuntu 32 bit version on my HCL netbook. I use reliance netconnect (Huwai EC 1260 or 168c). I have configured it and it works well. But the only problem is that I have to connect the netconnect device before booting. If I connect it when its ON, the networkmanager does not connect automatically. even on the right on the tray icon, enable mobile broadband option is not there.
View 2 Replies View RelatedI just installed Debian on my main desktop and I'm having issues with Pidgin auto-connecting. I have three accounts enabled (2 AIM, 1 GTalk), but the problem occurs even if I only have one account enabled.If I explicitly enable (or disable then re-enable) an account it will connect without issue. However, when Pidgin is launched, or if network connectivity is interrupted, no accounts will connect. No matter what, it is always reporting the status as "Waiting for network connection.Google turned up several related issues from a few years ago, but nothing with an applicable solution today.
View 2 Replies View RelatedI am setting up a KIOSK in a public location. The Idea being that staff will turn on the workstation in the morning and click the xguest account. Xguest will log in auto connect to AP, load Epiphany full screen and bring up the company web page. I am new to SELinux (there's the first problem!). I have a Fedora 12 SELinux box with vanilla xguest, User Profile Editor and Lockdown Editor installed. I have an SMC 802.11 NIC. I have configured the NIC to auto connect at BOOT. I configured the Lockdown Editor for Epiphany to the desired settings.
Everything works fine under the normal account. Everythign works under the xguest account except the auto connecting to the AP. I have made sure the /etc/sysconfig/network-scripts have the correct settings for the AP. The AP does not broadcast the ESSID. When I log in as the xguest I have to select the BSSID and type the password in to connect the first time. After that it will work even after reboot. If I power off again I have to select the BSSID and type the password again.
I think it is something with SELinux stopping it from auto connecting. I tried adding a script to the Startup Applications settings for the xguest account and SELinux blocks it from running. How can I set up the xguest account to auto connect to the AP?
I'd like to know how to configure Fedora 14 so my VPN connects and reconnects itself automatically, since the "connect automatically" thing I checked in the network manager doesn't work.Is there a way to make sure that everything uses the VPN, so when for some reason the VPN is disconnected the applications will wait for the VPN to reconnect itself instead of switching to the regular network ?Also since it's pptp VPN I tried to disable Ipv6 but I don't know how to check if I successfully did it, can you guys give me the command line to check that ?
View 2 Replies View RelatedI have a nifty new headset (a JawBone icon�the noise cancellation is incredible) and I've successfully connected it to my Karmic laptop (64 bit, for the off chance it makes a difference). The trouble is, I only occasionally want to connect it to my laptop; I mostly use it with my mobile 'phone.
The two devices fight over my new toy a lot, and invariably the laptop wins, contrary to what I want. It seems a pain to have to rediscover the headset every time I want to use VIOP or whatever, so is there a way to add a device to Karmic's Bluetooth list, but not have it connect whenever it sees it?
I am using auto login during start up, and during connect with bluetooth prompt come for keyring password and I don't know that.
View 1 Replies View RelatedI'm not able to set up eth0 with a static ip adress.service network restart and it was okkay but when I try to turn off and turn on, the ip adress is set up with dhcp.
View 7 Replies View RelatedI got a problem about network proxy setting. With the graphics setting interface, I set auto proxy with the URL address but it is weird that the setting only work with eth1(wireless), doesn't work with etho(wired). however my wireless driver is always a problem for Linux. i also tried export http_proxy= XXXXX:8080 it still doesn't work at all.
View 2 Replies View RelatedI've brought a friend over to linux from windows. He has some how deleted his "Wired Etho" connection. He said his computer would not shut down(Mint Linux 9), so he unplugged it. You guessed it right after restarting no internet. After checking under "Network Connection" his wired connection is gone. My question is? How to reconfigure a "Wired Etho" connection? He has a dsl connection running a Linksys router(sorry I don't know the model number). I have only talked with him on the phone, so I have not personally checked the system out. I just finished working on it this past sunday and everything was fine.
View 3 Replies View Relatedi have problem related nici am using a dell inspiron 1545 laptop outputs are following---(1) [root@localhost ~]#lspci |grep -i ethernet 09:00.0 Ethernet Controller: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller (rev 13)
(2) [root@localhost ~]#cat /etc/modprobe.conf
alias scsi_hostadapter ahci
alias scsi_hostadapter1 usb-storage
[code]....
