I'm using Easytether through my HTC Droid for interwebs running Ubuntu 10.04. However I also have a home network. However when I hardwire into the network via a D-Link router (Auto eth0) my internet no longer works. The same is true when I plug in my iPod. The Droid loses it's connection. What is the problem?
View 2 RepliesI installed the pack and ran the commands and it showed it connected. I closed the terminal windows. And went to firefox unchecked work offline but firefox will not reconized easytether connection.
View 7 Replies View RelatedI can't figure out why my ethernet isn't recognizing its connection. ifconfig returns the hardware address, route -n returns an empty table
View 9 Replies View Relatedso I now have 4 Ubuntu Lucid LTS installations - terrific - but the alternative Ubuntu boot on this particular PC (all made from the same Live CD) does not have any eth0 configured, so I cannot reach even my router. I can look at the eth0 properties with "Network tools" and it has no IP or MAC. I have the network notification gremlin installed but it does not appear on the top panel. {"eth0" hardware works under Win XP, hence this post}.
I'm a novice at Ubuntu, and I am at a loss. I realise that networking is supposed to be automatic, no 'tool' should be needed, but what can I do when it has not configured?
Upgraded To Ubuntu 10.04 The Other Day. And when I first installed it everything worked great except for my sound card which I fixed. But there was no problem with connecting to my Router via an Ethernet cable. Then I updated the video card drivers, restarted my PC and it wouldn't connect. It would try over around 1-2 mins then tell me its disconnected. No green light activity on the router / network card either.
I've reinstalled fresh copies of Ubuntu a couple of times now, Hoping to get the default settings back. But nothing has worked since.
I looked around the net and found quite a few people had this problem on previous versions of Ubuntu but it would seem most of there fixes were for there Version, so it hasn't helped me.
Heres some info:
ifconfig:
I've tried all the various things from dhclient to ifup/ifdown etc etc.
I am using BSNL broadband ISP and I am able to get network on windows os but not on my ubuntu.( I have a dual boot). I see Auto eth0 connected from the notification but when i am pinging [URL]... it says unknown host.
View 9 Replies View Relatedmy eth0 connection is not automatically connected when fedora starts. I checked " activate device when windows starts" in network configuration. still it is not auto connecting and after connection the network icon is not changing to connected status although it is connected.
View 4 Replies View RelatedI'm running Kubuntu 10.4. My problem is that Network Manager keeps defaulting back to Auto eth0. I have created a new wired connection and set my manual addresses. I have ticked the 'connect automatically' button. Every time I reboot or wake up it reverts back to Auto eth0.I did have wicd installed but this was not reconnecting after wake up (said it was connected but I couldn't ping etc), this is a pain also.
View 9 Replies View RelatedI did get my connection working though. I had to boot my Laptop with the USB cord connected to the g1 and usb sharing selected in easytether. Then in one terminal type "connect easytether" You will not have to enter the serial number if you only have one device connected. Next open a new terminal without closing the previous one and enter the "sudo dhclient easytether0". Mine worked after that. You should get a reply in the terminal after each command. If all you get is another prompt, something is wrong."
I have a T-mo G1 and and have downloaded easytether, both the phone app and the driver for ubuntu. The install went well with no errors. I launch Easytether on the phone and click enable usb tethering on the G1. I open a terminal and enter "easytether enumerate" and the response is a number I assume is my G1 serial. Then "easytether connect (the number from above)" and this time no message.
I disable my wifi and then try to open a page (firefox 3.6.6) and all it says is I am in offline mode. I open network connections and dont see anything there.
I'm trying to setup my interfaces along side GNS3 for study purposes, and came across a ..... vid saying to try this (my current config)
[Code]....
I'm praying for some crappy syntax error, also in Network Connections... its now blank, the original auto eth0 setup is missing
i installed and ran System Profiler & Benchmark ran a test. then i rebooted and turned off ACPI/PowerNow. at this point i realized my network card had gone down so i went back an turned the ACPI on. nothing changed.
View 1 Replies View RelatedI'm not sure what's going on, but I have two computers that both aren't working after I reboot them. When I boot up the machine and do ifconfig, eth0 is missing.If I issue $sudo ifup eth0 then the ethernet is working, but I'm not sure why I'm booting up without a connection. Even after $sudo ifup eth0The networking app that's in the taskbar is missing.looked at dmesg and it looks normal$dmesg | grep -i ethmy interfaces fileiface eth0 inet staticaddress 192.168.15.146netmask 255.255.255.0gateway 192.168.15.1
View 2 Replies View RelatedI have installed RHEL-5 (2.6.18-53) on my Desktop (ASUS Motherboard with Realtek PCIe GBE Family Controler 8168). After installation eth0 is not detecting. I downloaded R8168 drivers from Relatek site, but I am unable to install as it's throwing the following error.
Wed Sep 8 21:49:41 IST 2010
make -C src/ clean
make[1]: Entering directory `/root/Desktop/REALTEK/r8168-8.019.00/src'
rm -rf *.o *.ko *~ core* .dep* .*.d .*.cmd *.mod.c *.a *.s .*.flags .tmp_versions Module.symvers Modules.symvers Module.markers *.order
[Code]......
I'm having the same Harker2010 's problem.Running 10.04 LTS on a Dell latitude D-820, and switching between lan and wifi worked OK until last upgrade.Harker2010's screenshots are also valid for my problem. I've tried everything I see on this post but the problem still there.
View 1 Replies View RelatedI am trying to get a network bridge configured but every time I make the changes and restart networking (or reboot) eth0 appears to come up OK but I can no longer talk to the outside world via it. With no bridge defined, I can talk to the web using either wireless or wired; wicd is configured to switch to a wired connection when available (got rid of Network Manager. It didn't recognise eth0(!)).
I want to use the bridge so virtual machines (LXC containers) can talk to the web when the machine is wired to the wireless router. Eth0 gets its IP address (192.168.1.4) via DHCP from the router and I want to bridge to another subnet, 192.168.154.n say, and the containers will have fixed IP addresses 192.168.154.101, 102, 103 etc.
[Code]...
I've got a 64 bit home server system that was upgraded from FC2 to 7, 9, now 11. I've now got a weird situation where dns inquiries will not work when I reboot the machine, until i restart eth0. When I reboot, I can open firefox on the machine, put in the IP of my dsl router, and look at it's settings just fine. All other internet uses, whether it's yum,squid, or etc. comes back with the usual name server not found messages. I've got thenetwork setup to use the named on this server, ( the web's a tad bit slower when I set it up to use ISP's windows nameservers, go figure).
Anyway, a few years ago I set up the machine to use the network service to bring theseinterfaces up. (I believe this was because the early versions on Networkmanger had some issues. In an attempt to fix this issue I reset Networkmanger start at startup, and reset up eth0 and 1 to be controlled by it.I then got namserver1=XXX.XXX.XXX.XXX in resolve.conf at reboot..(yeah they were really X's, I'm not hiding an ip here) I tried going intonsswitch.conf, found the line hosts: files mdns4_minimal [NOTFOUND=return] dnsand changed it to:hosts:files dns mdns4_minimal [NOTFOUND=return]No joy, I still have to do an ifdown eth0 and an ifup eth0 to get dns to work..
Ok, so eth0 is up and working great. eth1, however, comes up with a link light, however the packet counters in ifconfig remain at 0. Appears that eth1 isn't working.
Here's my setup:
-Dell latitude CPi laptop with 2 PCMCIA network cards and no built-in ethernet.
-Slackware v11
-eth0 is connected inside my router on my 192 network. Static address with good connectivity
-eth1 is connected on the other side of my router in promiscuous mode in order to listen to the traffic coming into my network.
Troubleshooting so far: I have switched the pcmcia cards between slots and regardless of which card is in eth0 or eth1, eth0 works and eth1 does not. I have also switched the card dongle between cards as well as the ethernet cabling between the cards. With any of the combinations eth0 works like a champ but eth1 does not, so I think I've ruled out hardware problems.
When I log onto my Ubuntu 9.04 boot I am disconnected from the internet, on my windows 7 boot It works just fine, I have attempted disabling networking, power cycling the modem and router, and re-enabling networking, no dice though. hovering over the connection icon tells me that there is no network connection.
Opening the edit connections window tells me that there a wired connection called Auto eth0 that is set to never, and that is all that I can find. I hunted for other forums on this and found a few but none with a successful resolution.
my eth0 suddenly stopped working on FC10. i have been using it the whole time, and now it refuses to even ping the gateway. dhclient is not receiving a dhcp offer and when i put in the information manually, it is not even able to ping the gateway. netstat -rn shows that the destination of the router is going nowhere.
i do not think it is the hardware/software, but rather maybe the provider? i am from central europe but just moved up to great britain and working at a friends place. i can connect the mac powerbook without a problem (it will get an ip with dhcp), but not the linux machine.it is a normal ethernet modem connection here. can it be, that it checks MAC addresses or even the computer names? the powerbook also has a really weired IP address: 77.102.xxxxx
i am not using network manager, but command line tools and have nm uninstalled. does anyone have a clue, what this could be about? i am not a newbie, but this is really puzzling me.....
I want to set my desktop IP address to always be 192.168.1.2. The NetworkManager connects to the network automatically and the IP address is assigned randomly. I can set up another connection in NetworkManager and always change over. But is there any way to make the default eth0 interface to be permanently set to a certain address (using NetworkManager, not ifup)?
View 9 Replies View RelatedI have this ubuntu machine that lives under my desk and is basically a utility machine. Mainly I ssh to it and get synchronize/backup files, etc.
When I reboot, for some reason the auto mount for my usb drives doesn't work until I actually hook up the monitor and log in to the gui. When I ssh in after reboot, I'm unable to access my USB drives! "Not Authorized"
I'm not sure how to mount a drive from the command line... really I just want the machine to auto mount the drives when it starts up... gui login or no.
5.10 Breezy configured as machine controller. Works great eth0 is a fixed IP to communicate with controller comms board. Not easy at all to alter - the comms board is hard coded to listen on eth0 for commands.
I can use eth1 as the default gateway and ping google.com, etc. But when I now attempt to communicate with the controller with netcat, e.g.
Code: echo !HH | nc 192.168.1.6 80
I obviously never get an answer since the request is passed via eth1. Using the -g option with netcat doesn't work either. I had a look at iptables but it doesn't seem to be able to do what I want. How I can still use eth0 as my communication port to the controller whilst eth1 is the default gateway?
I have two servers on a vlan at my datacentre/colocation and previously both servers had public IPs on their eth0 interfaces. The servers are HP ProLiant DL360s - one is a G4 and one is a G5 The newer G5 is now the LAMP server and the G4 has been retired and I want to repurpose it as an iSCSI target using openfiler freenas or similar.
My G5 has public/static IPs lashed to the eth0 physical interface and the eth1 is not configured to do anything yet. The G4 will have both interfaces available - perhaps one for ssh access from one of my static public IPs and the other to be a private IP on the local vlan. Here is what I am trying to get my head around...
The G5
eth0 - Public IP - full LAMP services on two or three virtual interfaces
eth1 - Private IP 192.168.0.1
The G4
eth0 - Public IP for ssh
eth1 - Private IP 192.168.0.2
Because my traffic between eth1 on these boxes is via private IPs on the local private vlan it doesn't add to my quota for bandwidth. How do I go about configuring the routing and gateways and other aspects of this so that I can run a private IP space network between the eth1s and still serve the outside world from the eth0s...
I am afraid that if I assign the private IPs to the eth1 interfaces the routing may either not work or interfere with the access to the production internet facing interfaces (eth0s).
If I made a distro from scratch it would have been Lubuntu, cept I'm sure my theming would have been horrible. Now Ive installed on a couple of my Laptops, and even had a few friends convert, and for the most part everything is hunkus doris, cept one small issue thats keeping me from slapping it on my trusty laptop. I'm lost as to what the problem could be. Ive tried just about all I can think of, but I use sprint mobile broadband to connect to the net and then use Network Manager to share this connection with the laptops and Palmtops around the house. I can get my sprint modem to connect thats not a big problem the problem is now I cannot get the Auto Eth0 to connect to send out as a share. It just refuses to connect. Now this is not a Lubuntu problem at all Im sure its somehow a Lxde problem, as Mint Lxde, PeppermintOS, and so on do the same thing, refusing to connect Auto Eth0 while Sprint is connected. Any Gnome based distro this works flawless, as does Xfce distros, so Im sure this is somehow something within Lxde. Im sure its down to just "missing" a file or some stupid overlooked thing.
View 3 Replies View RelatedI'm running a dual boot Ubuntu 10.04/Backtrack 4 (Ubuntu 8.10) system. I can get internet in the BT4 side but not in the Lucid side. In Lucid I can ping my router, and the network manager says I'm good to go, but I can't get to any web sites. It all started when I tried to put my laptop on another network by mimicking the settings of a computer I had just unplugged from the network. MAC address and all.
ifconfig eth0:
Code:
eth0 Link encap:Ethernet HWaddr 00:1f:16:ba:4c:8c
inet addr:10.136.9.147 Bcast:10.136.9.159 Mask:255.255.255.240
inet6 addr: fe80::21f:16ff:feba:4c8c/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[code]....
I have edited my /etc/fstab file in order to have it automatically mount a windows network share at startup.
The problem is, that it isn't really working during startup. After I log in, in order to make it mount I have to open the terminal and enter "mount -a".
The following is my fstab file:
Code:
I suspect this has something to do with my laptop not having made a network connection when the entries are mounted, but I'm not sure. How would I go about finding out about any errors?
I recently installed Ubuntu 10.04 on an older PC and I'm having problems with the network card built into the motherboard. When I connect an ethernet cable into the ethernet port I get a solid amber light, and I can't connect to my router, (which is being directly connected). Nothing is shown in Network Connections, but on another PC with the same version of Ubuntu it shows "Auto eth0", and it works just fine connecting with the router.How do I fix this? I'm an Ubuntu noob so I'm not really sure what to do here.
The network card is an Intel 82547EI Gigabit LAN controller, and Intel's website offered a driver available for my kernel version of Linux. However I was typing everything it told me to do in terminal, (which half the time I have no clue what I'm typing actually means), but I ended up getting some errors towards the end of the install process. I'm not sure if I messed something up or the driver just isn't going to work.
I'm hoping there is an easier fix for this, I've been searching the net all night trying to find someone with a similar problem and I haven't found any. I think I have another ethernet card which I might pop in and see if that works....but I figure I'll most likely run into the same problem because I know for sure the motherboards network card works - has on Windows, I just can't get it working in Ubuntu.
im trying to setup eth0 with subdevice eth0.0 and eth0.99 to come up at boot
eth0 is dhcp clint
eth0:0 is static ip
eth0.99 is 802.1q vlan interface
/etc/network/interfaces
Code:
auto lo
[Code]....
To launch easy tether I need to open 2 terminals and type some command, not all that hard, but I can I do this with one launcher? "Open Terminal and run "easytether enumerate", then "easytether connect". Once it says the connection is established, do not stop the running "easytether connect", open another Terminal and run "sudo dhclient easytether0". "
View 4 Replies View Relatedi install kernel rpm after i boot that kernel network not working kernel name : kernel-rt-trace-2.6.24.7-132.el5.centos.i686 [URL] error "Bringing up interface eth0: Device eth0 has different MAC address than expected, ignoring."
View 1 Replies View Related