Just installed win7 next to ubuntu 10.10. on a newly purchased Dell inspiron N5030. Win 7 wire and wireless both work. In ubuntu , my wireless works. but cannot get the wire to work.I just ran ifconfig and found out i have nothing in the ethO at all.How do i put it in.
View 1 RepliesI'm running Ubuntu 10.10 on Macbook Pro 2,2 hardware. It stills picks up wireless internet (but cannot connect when the networks only have one or two bars...) but the ethernet won't accept a cord. It registers that a cord has been plugged into the computer, but will not connect to the internet via it.
I'm currently running on a live CD of Ubuntu 9.04, and the ethernet cord works fine, so it's not my hardware I'm worried about. (The change in registering cords came about after I re-installed Ubuntu after I wanted to switch to pure Ubuntu rather than running a dual-boot system.) It's something to do with the networking program I have on the system.
Cannot activate network device eth0!" device eth0 does not seem to be present, delaying initialization". i cannot find my network card while i set up network configuration
View 8 Replies View RelatedI'm not able to set up eth0 with a static ip adress.service network restart and it was okkay but when I try to turn off and turn on, the ip adress is set up with dhcp.
View 7 Replies View RelatedI got a problem about network proxy setting. With the graphics setting interface, I set auto proxy with the URL address but it is weird that the setting only work with eth1(wireless), doesn't work with etho(wired). however my wireless driver is always a problem for Linux. i also tried export http_proxy= XXXXX:8080 it still doesn't work at all.
View 2 Replies View RelatedI've brought a friend over to linux from windows. He has some how deleted his "Wired Etho" connection. He said his computer would not shut down(Mint Linux 9), so he unplugged it. You guessed it right after restarting no internet. After checking under "Network Connection" his wired connection is gone. My question is? How to reconfigure a "Wired Etho" connection? He has a dsl connection running a Linksys router(sorry I don't know the model number). I have only talked with him on the phone, so I have not personally checked the system out. I just finished working on it this past sunday and everything was fine.
View 3 Replies View RelatedMy 9.10 has lost it connection to my router.Lucid finds it ok as Auto ethO , XP gets on the net ok as wellHow do I fix Karmic ? I click on network, it is greyed out but still lets me edit connections and add wired as auto etho but still no connection.Not sure what else to do ?ifconfig -a shows -
Code:
ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:22:15:20:1b:3f
[code]....
My sons Ubuntu installation on his computer hasn't showed the Network Connections Icon in the Panel for a long time. This weekend everything was working fine and we needed to go away for the weekend and unhooked the router. When we came back the computer wouldn't connect back up to the internet.
How can I fix the Wired Connections Icon on the Panel and get the Auto Connect to work again?
I just installed ubuntu 10.04 on my Dell precision m4300 and am unable to activate either wired or wireless connections. Had them both before and not now. I have tried several online info sites but unable to clear up situation.
View 3 Replies View RelatedI have installed Ubuntu 10.04 LTS on my Compaq 767TU notebook. Everything is working fine except "Realtek RTL8139 PCI adapter". Although it is showing up in device list and installed but the LAN link indicator lights are off. No communication is possible with dhcp.
View 2 Replies View RelatedThe problem is that I'm too lazy to buy a wireless network card for my stationary computer that I'm going to use on my room with no wired network. So I'm looking for how to use my laptop with Ubuntu 10.10 as a wireless to wired network converter, sorta. I know how to use a laptop as a "wire to wireless" network converter, but in my case, I need the opposite. I think I'll need a crossed network cable between my ubuntu laptop and my stationary computer (that's the one I'm aiming to get internet onto), but I don't have a crossed one, can I use a switch instead?
View 3 Replies View Relatedi earlier had windows xp installed on my personal computer..
when i plugged in my LAN cable..
it always showed "limited connectivity"..
then i had to repair it..
but now..
when i have installed Ubuntu 10.10..
it seemed to work fine for around 2-3 days..
but now..auto etho does not connect..
Wan (mail) is by way of wireless internet into a linksys (PPPoE) 192.168.1.1 router and then only to the mailserver into etho0 192.168.1.3. Mailserver also has etho2 192.168.1.2 connected to a switch that has 3 pc's attached and an adsl router for pc internet access. Server does not provide proxy for pc's. Just mail. Linksys is 192.168.1.1 and can be seen by the isp provider. The server wan is 192.168.1.1 and can ping to 192.168.1.1 and can browse the net via linksys. The lan connection is 192.168.1.2 and this should be visible to the pc's but it doesn't appear to be and can't ping a pc although the switch lights show it is connected.
etho0 192.168.1.3, 255.255.255.0 & default gateway 192.168.1.1
etho2 192.168.1.2, 255.255.255.0 & nothing for default gateway.
DNS is blank for hostname and primary dns is 192.168.1.1. secondary, tertiary and dns search path are all blank. Should there be a default gateway for etho2 even though it only has a lan connection ? If I gave it the adsl gateway then how would the server know which card to use for outside access?
I'm stumped here as it seems like after an update etho:0 has assigned itself 2 x IP Addresses. I don't understand how this happened or how to fix it so some help would be great as I cannot access cPanel while it's like this or my sub directories.Here is a print of ifconfig
-bash-3.2# ifconfig
eth0 Link encap:Ethernet HWaddr AA:01:5F:9A:FE:26
inet addr:95.154.254.38 Bcast:95.154.254.38 Mask:255.255.255.255
[code]....
i have problem related nici am using a dell inspiron 1545 laptop outputs are following---(1) [root@localhost ~]#lspci |grep -i ethernet 09:00.0 Ethernet Controller: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller (rev 13)
(2) [root@localhost ~]#cat /etc/modprobe.conf
alias scsi_hostadapter ahci
alias scsi_hostadapter1 usb-storage
[code]....
Ubuntu 10.10 Firestarter 1.0.3
My Desktop gets moved around a lot, meaning, I switch between Wire and Wifi often. I have been re-running the Firestarter wizard (when I remember to do so) each time I change from one mode of communication to another.
However, in Firestarter, on the STATUS page I can see both my wired connection and my wifi connection along with transfer data stats, despite which kind of Internet connection I have told Firestarter my computer is using.
Does this mean Firestater is actually protecting both routes and that I don't need to rerun the wizard to customize Firestarter for protecting the newest mode of communication I am using between these two different choices of Internet contact?
just installed ubuntu 11.04 on my old laptop (Dell latitude XT), to experience this OS. But for some reason I cannot get online, both wired and wireless network are 'grey', and i cannot enable them. Even when I try to go online with a USB wifi dongle,I also cannot enable wireless. Enabling Networking is selected.
I include the information I collect and hope this will allow you to give me a diagnose on how to make my wireless work.
lspci, for the build-in card
Code:
Thats looks like a DSL icon, but I am using wired. It was looking normal before and now this ugly icon keeps showing up.
View 1 Replies View RelatedDoes anyone know how is it possible to achieve this?
That once an ethernet cable is connected the wireless will be disabled and once the ethernet is disconnecter the wireless will be reconnected.
Using Ubuntu Maverick 64-bit.
I've downloaded lime-wire 5.5.8 for ubuntu Linux but it won't start-up.
View 2 Replies View RelatedI have a laptop with openSUSE 11.2 64bit. A printer is connected via USB. I uses an USB-soundcard for the connection to my HIFI.
Is there a solution, to connect to these USB-Devices without a wire?
I have found solutions, but they works only for Windows. No linux-driver at all.
- Xystec Wireless-USB-Hub and USB-Dongle
- Belkin Wireless USB-HUB
i just installed the newest version of Ubuntu on my Dell 14r(1440) laptop. It's the newest version of the laptop with the i3. I can't find any wireless networks and my laptop doesn't even recognize when i plug in a Ethernet cable from my router. There are no internet connections available when hard wired or wireless.
I have the hated Dell Wireless DW1501, 802.11 g/n 1x1 Half Mini network card, which is only compatible with Windows operating systems from what i can tell. I want to be able to connect to the internet both ways, but especially and more importantly using a Ethernet cable.
I cant get lime wire installed on my debian lenny. the repositories was changed to contrib non-free, still no go. Cant seem to get any kind of documentation even after 2 days of googling.
View 13 Replies View RelatedI have problem in connecting my Pc (which is linux based) with wireless router (LINKSYS WRT54GL) via wired. how to do the networking between my pc and router.
View 1 Replies View Relatedhow do I set up wire to accommodate turbo tax and i tunes?
View 2 Replies View RelatedI know that the wireless devices are working properly as other OSs on this HD work in various forms both .deb and .rpm. In setting up openSUSE11.4, no matter which wireless device in WPA is installed, the icon will go to the wired icon, not the wireless. You can see it trying to go to a wireless icon, but then it reverts to the wired one. I'm beginning to think that this a OS problem in itself and not an install problem.
View 3 Replies View RelatedUp until very recently I've had a wired network, and at boot I'd see messages about DHCPREQUEST and DHCPOFFER and stuff as it set up the wired network.
Now I've just got wireless working instead, but it still tries to use DHCP on the no-longer-existing wired network. So it says "DHCPDISCOVER on eth0..." and waits for a bit, then again and waits again, and all the time the boot is waiting for a reply to its DHCP requests and it's not going to get one. It doesn't seem to do any harm, because once it's given up and proceeded with the boot then the wireless does seem to work fine, but I'd like to speed up the boot a little by cutting out this needless waiting. Has anyone got an idea how I can stop it? I tried in Preferences-Network connections and in Administration-Network, and in System Tools-Network tools, and also from the network icon in the task bar, but I can't find anything which lets me configure the wired network eth0 or disable it or disable the DHCP.
Can i setup both the hardwired network and wireless printer network options in slackware13.1 for Brother HL-2170W mono chrome laser with both wire& wireless network options? 3 Slackware13.1, 1 WinXP PCs, 1 mac and 1 windows7 Laptop. Roomie is buy and i am picking if this setup can be done. We have 2wire gateway Ethernet & wireless enabled
View 14 Replies View RelatedWhen originally installing 11.04 I had problems getting my Ralink 5390 wireless card to work.
Today my computer froze completely and I had to turn it off via the power switch. When I turned it back on, wireless was no longer recognized! My iPod can connect to the network just fine, so it must be an Ubuntu problem. There are no problems with my ethernet connection either.
I researched this and found several threads about blocking and unblocking wireless devices using the rfkill command. Well, unfortunately for me the rfkill command doesn't work. When I type sudo rfkill list or sudo rfkill unblock all, nothing happens; it just returns me to my bash prompt. I even tried uninstalling and reinstalling rfkill...nothing.
I have been looking around the forums searching for similar problems, it seems not only me had this problem. About a month ago I did a regular update via Upd Manager. The next day - no wired connection.Still managable, since the local library has wireless. Now that won't work either.Just after I upgraded from Jaunty, I accidentally removed NetwMngr from the top right corner of the screen, but that should not have anything to do with how the program works, right? I now cannot reach NM, if I run it from the terminal, nothing happens visibly.
View 5 Replies View Related