I'm using fedora 13, and it's been a while that yum auto-update doesn't pop up.Some time ago, when updates were available, a notification popped up asking for update (and I love this feature because I didn't have to check manually).Under System>Preferences>Software Update i've Daily check for updates and weekly check for major updates, with no automatic installs.And doing System>Administration>Software updates, it load and updates correctly, just it's no longer automatically checked.
I installed Fedora 13. I edited my fstab to automount my NTFS-3g drive. It worked. Then I updated to Kernel 2.6.34.6-54.fc13.x86_64 It doesn't work any more.
On boot-up I get the following error (already showing in the login-page):
i did an update yesterday and after me-tv doesn't work any more, now when i run me-tv i get this error message,Duplicate object id 'hbox1' on line 1220 (previously on line 535)To c if the tunner was working i installed kaffeine and it works fine, so its something related to the me-tv, any ideas how to fix it
my wired auto ethernet stopped working. It doesn't appear to be my machine or the hub as the connection is fine using windows on the computer.I'm a bit clueless on the Networking front in Ubuntu. I've brought up the Network Connections box and checked that the Mac address is correct (and it is). I've tried it on Lubuntu and Openbox, but still no luck. The only oddity I see is that the Network Connections box says that the auto ethernet connection has never been used .
When I installed slackare 13 it detected usb drives and cameras automaticallyow it doesn't. I am runnning a 13.0 system, not current, so I have only applied the updates in that branch (iirc including a new kernel).nowadays when i plug a device in it does not seem to be detected by HAL (i.e not in KDE).However the device is listed if you use the command "lsusb" and the computer obviously knows it has been plugged in as there is a relevant entry in dmesg.Sorry for the generallised nature of the post, but I don't really know anything about HAL or how it can have stopped working
Is it just me or your update applet also stopped working recently? I'm running Factory KDE-4.4.2 and openSUSE-11.2. It's always "Checking for updates..." without finding any, even though I can always see new ones through Yast - Online Update. And sometimes it asks me to accept some key, when I click OK it asks me for a root password but after I type in half of the password it simply disappears and starts "Checking for updates..." again without end.
And YAST doesn't show any newer packages anymore but rather has "Switch system packages" on the top. If I click on that, then it starts showing newer packages and wants to update them all. But what if I want to use Packman's packages for multimedia and Factory KDE for KDE? If I select "Switch system packages" for KDE then it will update, for example, Kaffeine to KDE's but I want to keep it Packman's. If I search for Kaffeine, it shows no newer packages, but if I go to Versions, there's clearly a newer version there!
Today i made an update using Webmin, and after that php stopped working, instead of running the files it launches a download. So i checked what was going on, and php module was disabled in apache config. When trying to enable it, it said the file "/usr/lib/apache2/modules/libphp5.so" did not exist, and indeed it disapeared. I tried to reinstal php and apache (with and without --purge, through apt) and it didn't solved the problem.
Also i tried copying the file from another machine, also without success (this time it shows " Apache is running a threaded MPM, but your PHP Module is not compiled to be threadsafe. You need to recompile PHP.") Dont know what to do now, im kinda desperated here because this machine hosts my website =P
Basically what seems to have happened is after the recent Ubuntu update my Windows partition became unbootable (or maybe just removed from Grub). This wasn't a problem for a while though as I still had access to my files through Ubuntu.After a couple of weeks of using Ubuntu I needed to get into Windows, trying to (blindly) fix the problem I think what I did was open up Disk Manager in Ubuntu, clicked the Vista partition and marked it as bootable. Having done this some sort of error occured (can't remember what exactly) and after a reboot the partition is no longer accessible via Ubuntu.
I've read through a fair amount of similar posts and tried anumber of solutions but haven't had any luck so I thought someone here might be able to shed a bit more light on to my situation?Realistically, my main concern is getting data off the drive, if I can do that I can wipe the entire thing clean
Touchpad has stopped working after some update. How to re-enable it? I don't haveusb mouse. No PS2 port. pci=noacpi dop. apt-get install xserver-xorg-input-synaptics
I kind of feel like I'm out there hanging by myself when trying to understand Ubuntu. If there is a tutorial or guide for beginners, please feel free to post the link to it!I recently updated Ubuntu 11.04 on my dads computer and after the restart I noticed his keyboard no longer works. Well, it's has the light on like normally, but it's like the computer doesn't recognize it.
Debian 5 64 bitGnome, using compiz-fusion.Compiz had been working well ever since I installed it last year; a couple of days back there was a debian update (I think and x-server update was there); now compiz does not work anymore. if I select compiz as the window manager from the cmpiz-fusion icon, I cannot move/resize wndows, the titlebar disappears.
Running openSUSE 11.2 with HP All-in-one 3055 printer/fax/scanner attached through network. Using hplip package.
Printer works just fine. Scanner did work for quite some time, however it stopped working after some update about a month ago (using only opensuse update repo).
When doing hp-scan I get following error:
Checking all the logs I can think of I can't figure this one out. Tried newer hplip package fom HP site same issue (I have two systems, on one I've tried the new driver, on one only using opensuse update repo ...both same issue)
It worked fine with 8.04, although it wasn't as loud as it usually is with windows, but since I've updated its stopped working. When plugging the headphones in, a little sound comes through for a second when halfway plugged in, then nothing when fully plugged.
I've been running ubuntu on my Asus 1001ha netbook for half a year or so. I ran Karmic for at while, wifi working and all, accepted the recommended updates when Update Manager popped up and everything was fine until one day I let Update Manager do it's thing and my wifi stopped working.. Lycid had just come out that same week, so I thought "screw it" and installed 10.04 instead..
So I've been running 10.04 for a couple of months now, everything working fine, including the wifi - until today.. Update Manager suggested some upgrades, I accepted and *pouf* my wifi is gone again..
That's the second time Update Manager knocks out my wifi, any way to roll back todays update or how to the the wifi working again?
My mouse wheel stopped working after a package manager update.I'm still running 8.04 (yeah, yeah, I know, will be updating soon). I can't seem to find a "package manager update history" so I can see what got updated when I did that just today (changes can't be more than 24h old).I tried rebooting/cold boot just in case.I check xorg.cfg, but it hasn't changed since march of 2008, so I figure nothing overrode the config.
After I updated to 10.10, my ps/2 keyboard and mouse stopped working when in the gnome environment.I have tried to solve this by following the instructions here:
I have been running 10.04 in dual boot with Vista on a Toshiba Satellite A215 for the last 4 or 5 months. Last night I did a standard update and when I turned my computer on this morning I was given the standard prompt for Vista or Ubuntu. Every time I select Ubuntu the computer just restarts and gives me the same prompt.I have been looking over the forums, but most of the fixes seem to be done in Ubuntu, which I can't get into. I am fairly sure that it is an issue with GRUB. Does anybody know how to fix this problem from windows?
I hadn't updated until yesturday night, today after the massive update and reboot, my x stopped working. What happens is, after the splash screen, both screens goes black and unresponsive. Tried killing X and alt + ctrl + f1 etc. I can probably fix this myself if I could access the terminal but, the other day I had to be stylish and remove everything from my grub boot besides Windows 7 and the default Ubuntu so I can't boot into root terminal. So, how would I gain access to a console before X starts?
Update Manager prompted me to run an update, which I did, then Flash stopped working after I ran ran the update.I first noticed the problem when I was using Chromium, trying to view a video on the BBC website, which displayed the message "Cannot play media. You do not have the correct version of the flash player. Download the correct version".So, I clicked on the download link, which took me to the Adobe site where I selected APT for Ubuntu 10.04+, but that didn't make any difference, so I then tried to view the same video using Firefox, but that displayed the same message.Could someone please tell me what I need to do, in order to get Flash working again?
I got my wifi working about a month ago, I have an HP Pavilion dv8000 with a broadcom bcm4318, it worked fine until I updated my system and rebooted, now I can only use my ethernet
My printer no longer prints anything with exception to the TestPrint page.Any other job I give it, it says is "completed" in the queue, though nothing has printed. Installed cups again, after a complete removal. No change. Heres what troubleshooting gave me:
Code: D [06/Mar/2010:07:26:01 -0500] cupsdSetBusyState: Dirty files D [06/Mar/2010:07:26:01 -0500] cupsdReadClient: 12 POST / HTTP/1.1
I have a Lenovo IdeaPad s10 which worked flawlessly with wired, I could never get it to so much as search for a wireless network, so I gave up on it long ago.
I'm using UNR 9.10 on it and today, after updating Wicd Network Manager stopped working making it impossible for me to go online with the netbook even when using a wired connection.
I restarted the computer after the update and once UNR booted up wicd wanted root access to use my computer's network cards, I entered my password, this never happened before but whatever, unfortunately after I entered my password wicd didn't show up in the tray and sure enough there was no internet connection whatsoever.
I tried running wicd manually, UNR says opening, but nothing comes up, no tray icon no nothing.
i have lucid installed on my toshiba laptop after after an update my wireless stopped working keep asking for password and my wireless card is not detecting no wifi :
I have an EEE 1000 that successfully connected to WPA networks until yesterday. I tried re-installing the RT2860 drivers that had been previously modified and did not have success.
Additionally, I just installed 10.04 on a Gateway laptop that's a few years old. It immediately connected to the WPA network and I ran the updater. Lo and behold, after updating it no longer connects to the network.
