Before being an Ubuntu user I bought a startech USB display adapter which alowed me to use a second screen. It was working on Windows XP.Now I don't know what to do because ubuntu seems not recognising the peripherical.
I am sure someone knows the way to get it.
In 8.04 i used this command to manually configure my graphics adapter.sudo displayconfig-gtk
I would like to do the same thing in 9.10 and 10.04. How do i do it?it is a unichrome pro in and older everex stepnote.
i updated and now the bar at the top of the screan does not extend all the way across my 2 screans and most of my icons have failed, ill upload a picture
View 1 Replies View RelatedI am trying to get a startech pcmcia parallel port working on my laptop and I just can't seem to get it going. here is my lcpci -v info on the card.
Code:
07:00.0 Serial controller: Oxford Semiconductor Ltd OX16PCI954 (Quad 16950 UART) function 0 (Disabled) (rev 01) (prog-if 06)
Subsystem: Oxford Semiconductor Ltd Device 0000
Flags: medium devsel, IRQ 20
I/O ports at 4020 [size=8]
I/O ports at 4028 [size=8]
I/O ports at 4030 [size=8]
I/O ports at 4038 [size=8]
I/O ports at 4000 [size=32]
Memory at 2c000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: serial
07:00.1 Non-VGA unclassified device: Oxford Semiconductor Ltd OX16PCI954 (Quad 16950 UART) function 1 (parallel port) (rev 01)
Subsystem: Oxford Semiconductor Ltd Device 0000
Flags: medium devsel, IRQ 20
I/O ports at <unassigned> [disabled]
I/O ports at <unassigned> [disabled]
I/O ports at <unassigned> [disabled]
Capabilities: <access denied>
Kernel modules: parport_pc
I do not know why it is not assigning it an io address. I should also add that the parallel port is enable in the bios with the default address of 0x0378. I have also tried modprobe parport parport_pc and parport_cs and ppdev, still nothing.
I have installed Ubuntu 10.4 on Virtual Box, I have installed it successfully, the only problem is when I check the display settings it only have 2 options : 600 X 400 and 800 X 600 and this makes it difficult to work on Ubuntu as 800 X 600 is half the size of my desktop. How I can increase / configure the display settings so that atleast I can fit ubuntu screen into my screen size.
I did install the addition application, restarted the OS but still I don't see any display resolution 1200 X 800, tried pressing ctrl+D nothing happens, after installing I saw it updated mouse cursor now i don't have to press ctrl key again n again to enter into the ubuntu OS but still struggling with the resolution as it's too small, please guide me (here is the screen shot of my screen after installing the addition app).
I just upgraded to Ubuntu 10.04 LTS from 9.10. After the upgrade process, I restarted and chose "Ubuntu, with [the current kernel]" and now I am greeted with a white screen with no login or boot splash. My processor is pegged according to the processor case light. My computer's specs are as follows: AMD Athlon X2 5200+, ATI Radeon X1300 Pro, 2GB DDR2 ram, Dell Socket AM2 Motherboard, and 250 GB 7200 RPM hard drive. I really need to get this computer to work.
View 7 Replies View RelatedI did a LiveCD to USB install, following the directions I found at [url] When I went to reboot to the USB stick, all I get is a black Screen (monitor is on and lit, just nothing on the display) No cursor or command prompt. I've tried holding shift to bring up the GRUB menu, changing splash quiet to nomodeset, or just adding nomodeset after the splash quiet thing. I've even tried xforcevesa instead of nomodeset still black screen. Looking at the logs nothing is current as of the last time I tried to boot the computer, it's strictly what was written when I installed it to the stick. Other things I've checked/tried, Pressing CTRL+Alt+F1 at GRUB to get TTY, all I get is that blank screen. I've Checked etc/default/grub to ensure the timeout was higher then 0. The Install CD seems to be OK but I have (as it did another install successfully) but I haven't done any throughal checking of it (there was no check this disk on the first screen of the LiveCD) The USB sticks also seem to be ok (in windows though). Using the disk utility on the live CD I did check the file system on the USB stick, the "/" partition came up clean. Anybody have any other thoughts on this install, any thing else I can check?
View 9 Replies View RelatedI have a StarTech USB audio adapter which I have been unable to get output from in Suse. Pavucontrol allows me to adjust the output to this device, and even shows some signal when playing media. However, no output makes it to the headset/speaker jack of the USB device. There does not appear to be any issues with playing media to the internal sound card & speakers of the computer. I booted up a Live Ubuntu disk, the device was recognized, and output made it with no problem. This leads me to discount a hardware problem. I'm running Suse 11.4 on a Lenovo Thinkpad T420s.
View 9 Replies View Relatedyum install httpd php mysql-server php-mysql
[url]
Not working
While using Debian Jessie with Gnome 3 and Nautilus file manager, my Startech HDD docking station will not auto mount and can only be mounted using commandline while in root. Previous GNU/Linux distros, such as Ubuntu 14.04, this device auto mounted without issue. All other devices, such as USB HDD, and USB pen drives, auto mount without any problems.
"Initailize Startech device with a 120GB 2.5" SATA HDD Fujitsu drive"
udev creates two block devices
Code: Select all begins with:
brw------- 1 root root 8, 64 Aug 6 10:11 /dev/sde
brw------- 1 root root 8, 65 Aug 6 10:12 /dev/sde1
changes to:
brw------- 1 root root 8, 64 Aug 6 10:11 /dev/sde
brw-rw---- 1 root disk 8, 65 Aug 6 10:12 /dev/sde1
dmesg produces the following results:
Code: Select all[ 179.127724] scsi 6:0:0:0: Direct-Access FUJITSU MHW2120BJ G2 0000 PQ: 0 ANSI: 2 CCS
[ 179.128513] sd 6:0:0:0: Attached scsi generic sg5 type 0
[ 179.129393] sd 6:0:0:0: [sde] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 179.130379] sd 6:0:0:0: [sde] Write Protect is off
[ 179.130388] sd 6:0:0:0: [sde] Mode Sense: 28 00 00 00
[ 179.131903] sd 6:0:0:0: [sde] No Caching mode page found
[Code] ....
Between the thirty second and the fifteen second wait, the block device "/dev/sde1" receives the "disk" group and read/write attributes, however, the drive is still not auto mounted and can only be manually mounted via root. The block device "/dev/sde" remains with the "root" group and read/write attributes are accessible for "root" user only.
How to correct this issue to allow auto mounting?
Just finished wiping and re-installing F12 From a DVD on an Dell Inspiron 9300 with a NV 6800. The NVidia site driver refused to install, so I used the method documented here
[Code]...
as instructed to in the sticky. On rebooting, after the load animation, the screen goes blank/black. If I click around, I can hear some beeps from the OS so I assume that things are running but i just can't see anything.
I tried installing 10.04 via Wubi on a friend's notebook and have hit problems with the display. The installation seemed to proceed OK (took ages to download / install - left it running overnight) until it came to boot to Ubuntu. The GRUB menu appears OK, but choosing Ubuntu leads to a blank screen with some icons at the bottom, which is displayed for a few seconds, then the (login?) screen just shows rolling display, like an out-of-tune analogue TV. I suspect that I need a graphics driver or something? The notebook is a logiQ notebook, with 128MB SiS Mirage-3 graphics.
View 2 Replies View RelatedAs the title says I have a problem with Windows 7. After installing openSUSE 11.2 on my Dell v1320 laptop Windows cannot initialize the device driver for its display adapter ( Code 37 ). The Dell Touchpad also couldn't start (Code 10). I have reinstalled an older version of the Touchpad driver from Alps and it didn't work. I also tried system restore but that didn't work either.
View 9 Replies View RelatedI am running fedora Fedora 2.6.31.5-127.fc12.i686 - works fine, but it puts my display adapter in old fashoned simple vga mode.
DISTRIBTION
Fedora 2.6.31.5-127.fc12.i686
Mysql 5.1.47
Apache 2.2.15
CONFIGURATION
1.25 ghz AMD athlon
NVIDIA RIVA TNT display adapter
ECS K7S5a board / chipset
AMD BIOS 07.00T
512 mb main mem
128 kb primary cache
256 2ndary cache
66 mhz bus clock
I use the bios to dual boot between two disks, (1) this op sys and (2)win98se - where I have a driver that fully supports the nvidia.
The disadvantage to my current situation is that there are some programs - eg Evolution - that assume I can see more than you see with this setup - eg the buttons at the bottom of the screen do not appear and i have to do a trial and error tabbing to get what i want. I just downloaded openoffice and i see that it wants 1000x2000 or so. Thus I wont even try to install it unless i can resolve the adapter thing.
I'm very happy with this fedora - use it for software development. But as I become more fond of it, I would like to use it instead of windows - which I can't unless i can see the whole screen
At one point - in response to a suggestion that I download security updates - I did so and got 2.6.32.12-115.fc12.i686. It was incompatible with my config - put up a screen that looked like a tv test pattern and went into a loop. So I went back to 2.6.31.5-127.fc12.i686.
I was wondering if anyone else ran into and issue with 11.3 with an IBM x3650 server using the embedded graphics card. As a reference this exact machine was working under 11.2. I am aware that there were significant changed in how video works in 11.3.
While installing and during the initial start of the operating system I can see graphical output, OPEN SUSE logo and such.
During the boot process the screen goes blank. The server is still running and I am able to ssh to the machine, but there is no access to the console.
Below is a segment of the /var/log/boot.msg that shows some errors. I can provide more logs if that would assist in tracking this down.
I did a quick google search on ES1000 and i2c and saw the same errors reported with Ubuntu version but nothing for OPENSUSE. There seemed to be a bug that was fixed in that kernel.
<6>[ 2.277737] [drm] radeon: cp idle (0x00008080)
<6>[ 2.277767] [drm] Loading R100 Microcode
<6>[ 2.277770] platform radeon_cp.0: firmware: requesting radeon/R100_cp.bin
<6>[ 2.279454] [drm] radeon: ring at 0x00000000B0000000
<6>[ 2.279476] [drm] ring test succeeded in 1 usecs
code....
This is a new install and the machine is not yet in production so I have the option to experiment with it a bit.
i have just put a Geforce 7300 GT graphic card into my machine the problem is the max resolution I can get is 1024x768 at 60 hz the screen is a benq fp71g+. also the screen goes blank when i click on the display icon in system settings. i know that the screen can be run at 1280x1024 so I don?t know where the problem is.
View 3 Replies View Relatedwe have installed centos in our organisation on vitual box.it gives display only in the middle of screen.i want to set it on full screen. when i select full screen option the back black screen become full but the display is same. how can i adjust it on full screen?
View 2 Replies View RelatedI installed ubuntu 10.4.I am getting no screen on my display by HDMI. I installed after that the nvia driver but it won't work 800*600 by 60hz .My display works fine with Windows 7 on my other computer. I do my first steps with an open scoure OS so does Ubuntu support HDMI?
View 9 Replies View RelatedMy problem is about 10% of my desktop is off screen. So I cant see my task bars but they are there. If i move my mouse pointer all the way up and off screen and click, the menu will drop down into view but I can't see the task bars. The desktop displays bigger than what the screen is. Adjusting the resolution just makes the icons bigger but does not fix the problem. Is this a video card incapatablity maybe? Running ati x1650 pro. I am also using Hdtvs for monitors. Tried sony bravia 32 inch and hitachi plazma 42 inch. Svideo and dve to hdmi cables. both tvs and cables have the same problem.
View 1 Replies View RelatedI have a busted laptop, case that is. The internals are great. So I stripped the screen and built a large box. I used a cnc router to build a lid that would flush mount the screen, and have a lip of wood left to cover the metal edges of the screen.
Ok, what happened is that the measure twice cut once rule or one of its variants went into effect, and I put the hinge on the wrong side of the box. Normally I would say just flip the screen around, but one edge is wider than the other, so that will not do. I want have the hinge towards the couch so that I can tilt it up and be able to easily see the screen.
So I need a way to invert the screen, and I can't seem to find a way to do it. The coffee table is an Emachines N-10, and my video driver is the Nvidea one, because karmic told me my onboard card is not quite up to the task of the other one.
Am currently using 8.10 (xubuntu). The machine's "issue" (I've searched for a reference, but the one I found was a forum thread with no answers) is that when the display is set to go to sleep after 8 minutes of idleness in the power manager, it projects a black screen instead.
I'm not sure what different 'power saving modes' a display/OS usually has, but in Windows, when set to 'go to sleep' the screen goes into standby, i.e something like 'no signal', and from what I've read a lot more power is saved in that mode than by simply showing a black screen.
It was the same when I was running 8.04 with a different graphics card, if that matters. Haven't been able to try a different display. Screensaver and timing and resume normal video out works ok.
I recently upgraded to Ubuntu 10.04 LTS and at first, everything was just fine. This issue came about yesterday, as far as I know, while my screen was locked. The login screen now displays only half of the original login screen (left side) and the other half (right side) is an odd view of a black background with a white box in the center (see this mock up). Another note of interest is that the right side pans as I move the mouse around the screen, as if the right-side view were a second view port to the login screen without displaying it properly.
I am not able to log in whatsoever. An incorrect password results in the standard error message. A correct password results in a temporary black screen, as if to load to the desktop, but then redisplays the login screen as if I hadn't logged in at all. I'm not sure where to begin, as I cannot login to run any commands and the grub menu does not give options to start in safe mode--it just loads directly to the latest instance of Ubuntu.
10.04 32bit Desktop edition. I have unchecked the "Enable screensaver when the computer is idle" option and have set "put display to sleep when inactive for" to "Never" but the display is still blanking out!
View 7 Replies View RelatedI'm running 10.04 and whenever i go to the login screen, the username and password window is on the wrong monitor. I'm also using an ATI Radeon HD 4850 if it makes any difference.
View 2 Replies View RelatedMy current set up in OS X has an external monitor (Acer H243H) and my MBP 13" screen as an extension. The only way for me to currently get the menus and panes on the external monitor is to turn the Macbook display off. is there any way for me to change this?
View 1 Replies View RelatedI went to lock the screen when I got up from my computer. I came back and there was a black screen. I tried hitting different buttons nothing worked. I rebooted and still went right to black screen. I can get into recovery mode but I can't figure out what's wrong with the computer. Can someone give me a hint. My father is very good with ubuntu but he said that he would just reload the os on it. But I really don't want to go thru that process all over again.
View 2 Replies View RelatedI have recently installed Ubuntu onto an older PC of mine (Pentium 4, duel-boot using wubi). The only screen I have for it is a TV screen (about a year old with VGA input). The screen works fine when Windows XP is live, but when I boot into Ubuntu things go downhill.
Its hard to describe exactly what is happening... Basically I have no control over which window is visible at a given time. Functionality still works, the machine can tell which window has focus and where I can click, but the visuals do not correspond. If I try to open a menu or drop-down it flickers in and out of sight and when multiple windows are open it is a crapshoot as to which will be visible.
I can't seem to get Ubuntu to run on my old Dell Dimension 2300. It boots to a purple screen then it goes to a black screen with a load of writing nothing else happens after this screen. [URL] Could someone advise how I can get it to work?
View 1 Replies View RelatedI have tried to connect my GMA500 based Acer 751 to an external dsiplay via VGA connection. I couldn't get the right resolution on the external screen (1920/1080) so I disconnected it and rebooted. Now there is only an "unknown" screen in the display menu. I have rewritten the xorg conf file per instructions for enabling GMA500 but to no avail - conf file looks right but screen is "unknown", low resolution and 4:3 aspect ratio, instead of 16:9. How to restore to laptop monitor - I think I can take from there to enable the right resolution.
View 4 Replies View RelatedI am running 9.10 on a HP Compaq. Every few days X will die. The screen goes blank and will not display anything. I have to SSH in, but even trying various commands like gdm restart does not help. I eventually have to reboot the box. Below is a snippet (hopefully not too large) of dmesg:
/dev/sr0 on /media/cdrom0 is a CDROM, but I dont think thats the issue.
[707515.629800] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[707515.629806] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
[707515.629811] Info fld=0x45d18, ILI
[707515.629813] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track
code....
