Ubuntu Installation :: FAIL After Update - No Display On Screen?
Mar 2, 2011i updated and now the bar at the top of the screan does not extend all the way across my 2 screans and most of my icons have failed, ill upload a picture
View 1 Repliesi updated and now the bar at the top of the screan does not extend all the way across my 2 screans and most of my icons have failed, ill upload a picture
View 1 RepliesI have Ubuntu Karmic 64-bit installed. Update manager tells me there are updates available, but when i try to install them, downloading the updates fail and throws this error:
Code:
Failed to fetch http://security.ubuntu.com/ubuntu/pool/main/e/eglibc/libc6-i386_2.10.1-0ubuntu16_amd64.deb
Consequently, a similar error occurs when I try installing Sun Java 6 Runtime.
Code:
Failed to fetch http://archive.ubuntu.com/ubuntu/pool/multiverse/s/sun-java6/sun-java6-jre_6-15-1_all.deb Connection failed [IP: 91.189.88.31 80]
Ubuntu Restricted Extras stalls when it's time to download the Java package I tried synaptic, update manager, aptitude, apt-get, and they all throw similar errors. Then I also tried connecting to different servers, to no avail. So to check if it's my connection to the net that has problems somehow, I tried downloading the file directly through my web browser, and it works. (But it's not recommended, and it won't let me!, install the updates manually, right?) I tried searching for the errors on the net and in the forums, and they're all somehow related to proxy servers. I then checked if I'm using some inappropriate proxy settings, and everywhere it's all set up to connect to the net directly, which is, well, my setup.
Take note though, that I am able to install other softwares normally, i.e, using synaptic, apt-get etc. The ones I tried include Pidgin and Mplayer. It's just these updates and Java:
Code:
jeanne@jeanne-desktop:~$ sudo sudo aptitude upgrade
W: The "upgrade" command is deprecated; use "safe-upgrade" instead.
Reading package lists... Done
[code].....
I apologize if this is posted elsewhere, but after a few searches I came up blank. My question is how do I redirect apt-get to look under current distro repositories? I upgraded recently to Karmic from Jaunty, yet apt-get is still looking for Jaunty. ie
[Code]...
E: Some index files failed to download, they have been ignored, or old ones used instead.ernie@ubuntu:~$I know this has to be an easy fix, I'm just too new to know what to do about it.
10.10 -> 11.04 Update hang and fail I used Update manager to update and the screen froze at the end of the "installing updates" phase with 1 minute remaining, with the last message "Installed liblvm2app2.2"
After a power cycle I get the grub boot menu but after that a blank screen and then nothing
The PC is a triple boot with Windows XP and Slackware. I can still boot into Windows.
I tried to update Linux kernel (2.6.39) but after installation procedure PC won't boot into NEW kernel, I get only BLANK screen, but hopefully older kernel works just fine (2.6.38-9), how to fix it, that I can fluently boot into 2.6.39?
View 4 Replies View RelatedI just finishing burning ubuntu on my laptop and was getting ready to partition my disk to allow space for ubuntu. I restarted my computer and when it was restarting ubuntu logo came up (as it booted from the disc). I was not wanting to install it at this moment so i was waiting for it to load then cancel it(just like a windows installation).It then froze and became pixelated with green and white colours.I thought it was nothing maybe just an error in teh disc. I waited 5-10 minutes then held the power button to shut it off. I then went to settings in the bios and changed it to boot from hdd first. After restart, windows began to load for like 3 seconds then blue screen. I dont know what went wrong or why this is happening.During installation of Ubuntu on my second try I keep getting:sudo: can't read /etc /sudoers: Input/Output errorsudo: no valid sudoers sources found, quittingWhat are the odds of me still having my windows 7 data?and could Hiren's boot cd help?
View 5 Replies View RelatedI have Ubuntu Karmic 64-bit installed. Update manager tells me there are updates available, but when i try to install them, downloading the updates fail and throws this error:
Code:
Failed to fetch [URL]
Consequently, a similar error occurs when I try installing Sun Java 6 Runtime.
Code:
Failed to fetch [URL] Connection failed [IP: 91.189.88.31 80]
And of course Ubuntu Restricted Extras stalls when it's time to download the Java package
I tried synaptic, update manager, aptitude, apt-get, and they all throw similar errors. Then I also tried connecting to different servers, to no avail. So to check if it's my connection to the net that has problems somehow, I tried downloading the file directly through my web browser, and it works. (But it's not recommended, and it won't let me!, install the updates manually, right?) I then checked if I'm using some inappropriate proxy settings, and everywhere it's all set up to connect to the net directly, which is, well, my setup. Take note though, that I am able to install other software normally, i.e, using synaptic, apt-get etc. The ones I tried include Pidgin and Mplayer.
It's just these updates and Java:
Code:
jeanne@jeanne-desktop:~$ sudo sudo aptitude upgrade
W: The "upgrade" command is deprecated; use "safe-upgrade" instead.
Reading package lists... Done
Building dependency tree
Reading state information... Done
Reading extended state information
Initializing package states... Done
The following packages will be upgraded:
libc-bin libc-dev-bin libc6 libc6-dev libc6-i386
5 packages upgraded, 0 newly installed, 0 to remove and 0 not upgraded .....
Code:
#
# sudo apt-key adv --recv-keys --keyserver keyserver.ubuntu.com KEY
# Ubuntu supported packages .....
i've installed 9.10 today on my dell studio 1558. and with the new release of 10.4 i want to update my ubuntu but it say
Error: No Internet connection (although I've connected threw wifi + cable)
then goes onto say: Cant download relevant package information
I've been running Lucid since it dropped. Decided to upgrade my NVIDIA 6600gt graphics card to the newest driver I found at the website. Installation went flawless. But after reboot, I got this:
Ubuntu is running in low-graphics mode
The following error was encountered. You may need to update your configuration to solve this.
(EE) May 05 12:24:17 NVIDIA(0): Failed to initialize the NVIDIA
kernel module. Please see the
(EE) May 05 12:24:17 NVIDiA(0): system's kernel log for
[Code]....
I just upgraded to Fedora 15 this afternoon from the install DVD.
When I try to do an update with the software update app I get an transaction error:
could not add package update for upstart-1.2-4.fc15(i686)updates: upstart-1.2-4.fc15.i686
Here is what rpm reports as being available:
When I tried yumex I get a different error:
Trying to boot Ubuntu 10.04.1 live CD and I get nowhere because the screen just stays black, with a monitor OSD alert saying "Cannot display this mode."
Is there a consumer version of Ubuntu available for regular people to use? I searched on the fourms and any post about "cannot display this mode" advises users to edit configuration files, or go into command line mode... what is this, 1991?
What is the real solution to this? Or is Ubuntu not made for consumer users? What other options do I have besides Mandrake?
The Ubuntu screenshots looks swell, nice graphic design of the user interface, pretty, but they should make the installer/live CD actually work like any other OS in 2010 first tho'.
I'm trying to test 10.04 Lucid 32-bit within 9.10 using VirtualBox. Guest additions aren't working fully--I can copy and paste text, but my mouse pointer still gets captured. No indications of any problems during installation. Also, I get the "Ubuntu is running in low-graphics mode" error message starting up, indicating Ubuntu can't detect the hardware properly. Screen size is stuck at 800x600.
I've tried reinstalling Guest Additions, increasing Video Ram to 128MB, and putting screen resolution and vbox device data into xorg.conf. Nothing changes. Actually, there is no xorg.conf on the system, only an xorg.conf.failsafe. I modified that, no effect--though the file gets overwritten on boot up to be what it was originally. I also tried adding my own xorg.conf. That doesn't get overwritten, but also has no effect.
I tried out many distros on my desktop before experimenting with my oshiba Satellite A665 laptop with integrated intel graphics. Everything worked out as normal until I was testing Ubuntu on a live cd, I clicked install and it sent me back to the login screen before I had made an account. So I then chose to restart and it started glitching so I had to manually power off. Ever since then whichever distros I try to install, they face numerous errors. On Ubuntu and Peppermint they freeze on the 5 dots installation part and Linux Mint just has a permanent black screen. Even the current Peppermint OS (only distro i have)hangs on the 5 dots when trying to boot onto the computer. This has resulted me in a computer that cant do anything, i've tried the noquiet and nosplash options but they don't seem to work. I was thinking of installing Windows and maybe erasing the disk by installing another distro later?
View 8 Replies View Relatedi updated Ubuntu and do not get any more display. when i bootup , i can see the ubuntu flash in middle of the screen for 1 sec and everything disappears.
View 2 Replies View RelatedUsing 11.04. After an update by Update Manager, everything seems fine. but after I rebooted it fails to reach the log in screen. It shows Ubuntu is booting up, after that, it seems it has crash, though I managed to boot it up and go into my desktop in low graphics mode.As I'm new to Ubuntu,
View 4 Replies View RelatedI have a error when i want to update my system via YUMI execute the next command.sh@ yum -y updateYou could try using --skip-broken to work around the problemYou could try running:package-cleanup --problems package-cleanup --dupes rpm -Va --nofiles --nodigestThe program package-cleanup is found in the yum-utils package.
View 5 Replies View RelatedE: Type 'nchpad.net/ubuntu-wine/ppa/ubuntu' is not known on line 1 in source list /etc/apt/sources.list.d/ubuntu-wine-ppa-maverick.list E: The list of sources could not be read. The above is the console output when i type sudo apt-get update Update manager throws the same error so now I can't install or update software .
View 2 Replies View RelatedHas anyone else seen panel weather report fail to display anything rightly beside the current date? Stuck on incorrect date as well...
View 8 Replies View RelatedAfter Kernel upgrade, sensors-applet doesn't display the hd temp. To fix the problem I have to remove and after reinstall hddtemp package.
View 5 Replies View RelatedBefore being an Ubuntu user I bought a startech USB display adapter which alowed me to use a second screen. It was working on Windows XP.Now I don't know what to do because ubuntu seems not recognising the peripherical.
I am sure someone knows the way to get it.
I have installed Ubuntu 10.4 on Virtual Box, I have installed it successfully, the only problem is when I check the display settings it only have 2 options : 600 X 400 and 800 X 600 and this makes it difficult to work on Ubuntu as 800 X 600 is half the size of my desktop. How I can increase / configure the display settings so that atleast I can fit ubuntu screen into my screen size.
I did install the addition application, restarted the OS but still I don't see any display resolution 1200 X 800, tried pressing ctrl+D nothing happens, after installing I saw it updated mouse cursor now i don't have to press ctrl key again n again to enter into the ubuntu OS but still struggling with the resolution as it's too small, please guide me (here is the screen shot of my screen after installing the addition app).
I just upgraded to Ubuntu 10.04 LTS from 9.10. After the upgrade process, I restarted and chose "Ubuntu, with [the current kernel]" and now I am greeted with a white screen with no login or boot splash. My processor is pegged according to the processor case light. My computer's specs are as follows: AMD Athlon X2 5200+, ATI Radeon X1300 Pro, 2GB DDR2 ram, Dell Socket AM2 Motherboard, and 250 GB 7200 RPM hard drive. I really need to get this computer to work.
View 7 Replies View RelatedI did a LiveCD to USB install, following the directions I found at [url] When I went to reboot to the USB stick, all I get is a black Screen (monitor is on and lit, just nothing on the display) No cursor or command prompt. I've tried holding shift to bring up the GRUB menu, changing splash quiet to nomodeset, or just adding nomodeset after the splash quiet thing. I've even tried xforcevesa instead of nomodeset still black screen. Looking at the logs nothing is current as of the last time I tried to boot the computer, it's strictly what was written when I installed it to the stick. Other things I've checked/tried, Pressing CTRL+Alt+F1 at GRUB to get TTY, all I get is that blank screen. I've Checked etc/default/grub to ensure the timeout was higher then 0. The Install CD seems to be OK but I have (as it did another install successfully) but I haven't done any throughal checking of it (there was no check this disk on the first screen of the LiveCD) The USB sticks also seem to be ok (in windows though). Using the disk utility on the live CD I did check the file system on the USB stick, the "/" partition came up clean. Anybody have any other thoughts on this install, any thing else I can check?
View 9 Replies View Relatedyum install httpd php mysql-server php-mysql
[url]
Not working
Host - Debian 5.0 32bit
VM - Ubuntu 9.10 32bit
KVM
On running $ sudo apt-get update
Code:
err http://hk.archive.ubuntu.com karmic release.gpg
could not resolve 'hk.archive.ubuntu.com'
......
The feature System --> Shutdown/Restart/etc. are missing
Just finished wiping and re-installing F12 From a DVD on an Dell Inspiron 9300 with a NV 6800. The NVidia site driver refused to install, so I used the method documented here
[Code]...
as instructed to in the sticky. On rebooting, after the load animation, the screen goes blank/black. If I click around, I can hear some beeps from the OS so I assume that things are running but i just can't see anything.
I amend the grub file at /etc/default/grub as administrator, I then open a terminal and perform 'sudo update-grub', but I receive the following error message:
Quote:
/etc/default/grub: 1: If: not found
What could this mean? How can I update Grub successfully?
I tried installing 10.04 via Wubi on a friend's notebook and have hit problems with the display. The installation seemed to proceed OK (took ages to download / install - left it running overnight) until it came to boot to Ubuntu. The GRUB menu appears OK, but choosing Ubuntu leads to a blank screen with some icons at the bottom, which is displayed for a few seconds, then the (login?) screen just shows rolling display, like an out-of-tune analogue TV. I suspect that I need a graphics driver or something? The notebook is a logiQ notebook, with 128MB SiS Mirage-3 graphics.
View 2 Replies View RelatedI am using Ubuntu 8.04. Most of my Administration functions have stopped working. If I click on Hardware Drivers, Hardware Testing, Log In Window, Software Sources, Synaptic Package Manager, and Windows Wireless Drivers my pointer turns into the timer wheel, so I know it is working, but then it just disappears and nothing happens. When I click on Update Manager my computer freezes. If I try to update through the red Updates Available arrow at the top of my screen my computer freezes. I can update through terminal but the red arrow never goes away. I also have 17 updates that won't update. I have tried them one at a time through terminal but they just freeze the computer. The only way to unfreeze it is to shut the computer down.
View 4 Replies View RelatedI'm trying to migrate my LVs over to a Luks volume (prompt on password at boot). Unfortunately, as soon as I add my luks-encrypted physical volume to my volume group, I'm no longer able to update my grub configuration. I've detailed my steps below:
I've created and unlocked my encrypted partition with the following:
Code:
sudo cryptsetup -c aes-cbc-essiv:sha256 -y -s 256 luksFormat /dev/sdb1
sudo cryptsetup luksOpen /dev/sdb1 crypto_agilityssd
My /etc/crypttab looks like this:
[Code].....