Ubuntu Installation :: 9.10 Boots To Tty1 Instead Of Tty7?

Mar 13, 2010

I installed karmic on a dell vostro 1000 - all went well until I installed updates and restarted. Ubuntu booted to tty1 instead of tty7. I'm not entirely sure what changed, but I could do one of 2 things. at the login prompt on tty1 I could wait about 2+ minutes and it would boot to tty7 w/o my network card (but keeping the wireless) or I could ctrl+alt+f7 and get to the normal tty7 with everything working.After a bit of looking around, i found a few solutions, but the problems were not exactly like mine.- I could reinstall gdm (I did this and it had no effect)- I could install minigetty and do something else (not to sure what they wanted here)- I could remove usplashIt turned out that removing usplash did the trick...I dont get the cool little white logo over a black screen

View 1 Replies


ADVERTISEMENT

Ubuntu :: Keyboard Inputs Go To Tty7 And Tty1 At The Same Time

May 13, 2010

I installed Ubuntu with the netboot. I only installed the packages I needed. Concerning X, I installed xdm as login manager and fluxbox as window manager. All is working fine except that whatever I type under X (under xdm or, after logging in, under fluxbox) appears in tty1! The keyboard inputs appear under X and under tty1 (so usually after "login:", or hidden after "password:").

Let me provide you with more details. Starting from xdm, I cannot access to the other ttys. "ctrl+alt+F[1-6]" do not work. Actually, this is not entirely true: after I type "ctrl+alt+F2", all my keyboard inputs under X will be appear in tty2 (and not anymore in tty1). I can see that from /var/log/auth.log which has a lot of lines like this:

Quote:

May 13 10:15:45 data login[2182]: pam_unix(login:auth): check pass; user unknown
May 13 10:15:45 data login[2182]: pam_unix(login:auth): authentication failure; logname=LOGIN uid=0 euid=0 tty=/dev/tty1 ruser= rhost=
May 13 10:15:48 data login[2182]: FAILED LOGIN (2) on '/dev/tty1' FOR 'UNKNOWN', Authentication failure

These errors are due to the fact that tty1 receives a wrong login (something I typed under X, before pressing RET). BTW: If I connect to xdm using my password (instead of my passphrase, thanks to pam_ssh), then I login into tty1 at the same time.

I checked that X is running under tty7. "ck-list-sessions" returns:

Quote:

Session1:
(...)
x11-display = ':0'
x11-display-device = '/dev/tty7'
display-device = ''
remote-host-name = ''
is-local = TRUE
(...)

Under X, if I type "ctrl+alt+F7" and "RET", then X crashes and it is launched again. After this, all is working fine: the tty[1-6] can be accessed and the keyboard inputs do not go anymore to them when I am under X.

I face the same problem on two different computers (a desktop computer and a laptop). Notice that I face the problem even with pam_ssh not installed (I mentioned pam_ssh earlier).

View 1 Replies View Related

Ubuntu :: Way To Open New Tty8 Session From Tty1 Or Tty8 From Tty7

Jun 16, 2011

I have a two part question regarding ctrl+alt+Fl

1)The Gnome Desktop Froze on me and I would like to c+a+F1 then kill GNOME, there are alot of pid associated with gnome, what is the easiest way to kill or reset GNOME from tty1

2)Just for kix, is there a way to open a new tty8 session from tty1 or tty8 from tty7

View 3 Replies View Related

Ubuntu Installation :: 10.10 Boots To Tty1 - Keyboard Doesn't Work

Mar 16, 2011

After a reboot earlier today, my Ubuntu 10.10 box (which I set up earlier today) has started rebooting to tty1. But I can't type a username - nothing appears, although the system does respond to control-alt-delete, and reboots. I don't see anything obviously wrong in the setup when I boot using the live CD and mount my disk.

View 1 Replies View Related

Ubuntu :: Boots Into Tty1 Terminal / Pressing Alt+F1 Through 6 Just Sends Into The Different Tty Terminals?

Feb 7, 2010

I bought an imac G3 yesterday and it has xubuntu 6.06 Dapper Drake installed on it. When i turn it on, after it POSTs, a little xubuntu logo appears it it begins to load 'essential drivers' and mount the file system, etc. After it is done doing that, it simply prompts me into a CLI that on the top says "Ubuntu 6.06.1 LTS ubuntu tty1". It asks for my username and password, and then it just keeps me in this tty1 terminal. I did some research online and supposedly by pressing alt+F7 you can exit the tty terminals and go back into GUI mode. Well pressing alt+F7 does nothing, and pressing alt+F1 through 6 just sends me into the different tty terminals.

I am very new to Linux so if someone could give me an idiot proof explanation on either how to fix it or whether im screwed and just need to reinstall xubuntu on here.

View 9 Replies View Related

Ubuntu :: Ubuntu Boots Into Tty1 After Using Plymouth Manager

Feb 18, 2011

I have quite a bit of skill in Windows, but I like Ubuntu. Only problem is, it doesn't boot up now! It boots into tty1 or something like that.I used Plymouth Manager available from [URL], and must have messed something up.

View 1 Replies View Related

Ubuntu :: Screen Goes Blank Or Boots To Tty1 After Loading Screen?

Apr 15, 2011

like any other Linux newb, I came to Ubuntu because my Windows crashed one time too many. And I chose Ubuntu because "it just works". But these past few days that hasn't been true. I'm posting this from a netbook with Ubuntu, and am having no problems whatsoever, but normally I use an Acer Aspire 5920G laptop. I'll include the specs as written on the sticker:

* Intel Core 2 Duo processor T5250 (1.5GHz etc)
* Up to 1024 MB Nvidia Geforce 8600M GS Turbocache
* 2 GB DDR2

Let me know if you need more details, and I'll add them later. Now, what happened was I clicked "hibernate" while leaving Firefox open. (I've done this hundreds of times, no problem) And when I went to turn it back on the next day there were weird graphical glitches in the loading screen, and it booted to the "tty1" prompt screen. I did a lot of googling and found quite a few posts about it, but the solutions either didn't work, or I didn't understand them. After trying several different suggestions from this forum and others, I managed to delete the graphics drivers. That enabled me to boot in low graphics mode, and naturally, I tried a whole bunch of things to make it work properly again. That only made it worse. Now it went straight from the loading screen to just blanking out and turning the display off. So, I tried new things. Over and over. The weird thing is even when I disconnected my harddrive and ran from a Live USB, the problem persisted. Could there be an issue with the graphics card itself? Anyway, after reconnecting the harddrive I tried to boot again. And it suddenly worked. Even HDMI to my bigger screen worked.

[Code]...

View 1 Replies View Related

Ubuntu Installation :: Tty1-6 No Login Promote After Recovering Grub?

Mar 7, 2010

I installed windows 7 and recover grub from the karmic livecd successfully. Now I can access all the OS in my machine. The only weird issue that I have is that there's no login promote in tty1-6 any more. When I switch to tty1-6, I can only see a flashing underline promote. But I can input anything in tty1-6. How to get tty1-6 back?

View 4 Replies View Related

Fedora Installation :: How To Set Console (Tty1) Screen Resolution

Jul 29, 2010

After install of FC13, my command prompt console and tty virtual consoles are a small box in the upper left corner of the screen. It contains tiny 80 characters by 25 rows. I want to fill the screen the old way. I assume the problem is high value screen resolution set automatically to match my display; with fonts based on the smaller pixels. This is NOT X-Windows. I can set that resolution but it has no effect on tty consoles.

It is NOT grub, which I can set with kernel parameter vga=0 to do exactly what I want. Messages from grub are big letters but change to tiny ones at init ("press 'I' for interactive startup" and the beginning of the boot log). This is not an issue with the same display using FC10 and no vga= parameter. Is there a reason that the kernel parameter failed after grub? Can I specify console resolution?

View 5 Replies View Related

Ubuntu Installation :: NVidia 8600GT - Start In (Tty1) Login Console Mode

Dec 17, 2010

I tried most methods suggested on many sites to install drivers
## through the additional driver panel only
## through the Nvidia.run file I downloaded
## through the terminal using apt-get

All failed to start ubuntu gui it takes me to the console login and I noticed it says "saned disabled" edit /etc/..something. This problem made me install ubuntu again three times and every time I activate the driver then install the driver Nvidia.run or through apt-get and both leads to a black screen tty1 login. So what to do now I installed and removed many things and I won't reinstall ubuntu again. Also I typed compiz and this came on:

root@ubuntu:/home/sherbieny# compiz
Xlib: extension "GLX" missing on display ":1.0".
compiz (core) - Fatal: Root visual is not a GL visual
compiz (core) - Error: Failed to manage screen: 0
compiz (core) - Fatal: No manageable screens found on display :1.0
Launching fallback window manager. I want to install properly so that I can start normally and enable the extra visual effects and the custom effects. Please elaborate the steps clearly

New Info:
When I enter nvidia-settings : server X opens and says
You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run 'nvidia-xconfig' as root), and restart the X server. When I enter nvidia-xconfig as root and restart nothing happens and when I enter:
nvidia-detector it says none
and when I enter: nvidia-smi

Error: API mismatch: the NVIDIA kernel module has version 260.19.21, but this NVIDIA driver component has version 260.19.29. Please make sure that the kernel module and all NVIDIA driver components have the same version.
Failed to allocate an RM client
Could not allocate resources!
root@ubuntu:/home/sherbieny# apt-get update kernel
E: The update command takes no arguments

A new and very exciting error everyone now also the windows 7 that I have besides linux has also crashed and cannot open the login window. I don't know whats happening all I know is that few hours ago I logged in to windows normally now I cannot login to either one of them and the funny part is: I'm working on my thesis on this computer and I cannot work anymore and I'm supposed to meet with the professor on monday.

View 1 Replies View Related

OpenSUSE Install :: 11.3 - Dev - Console Linked To Tty7 After Kdm Start

Sep 17, 2010

I could not solve examining the start and stop scripts. When I boot (default runlevel 5) my system all log messages are displayed on /dev/tty1. After the boot process has finished and kdm is started no more console messages are displayed on /dev/tty1. Instead all console output is redirected to /dev/tty7. When I change the runlevel from 5 to 3 boot.msg shows

Code:

Changing back to runlevel 5 gives

Code:

Why kdm redirects console output to /dev/tty7 instead of /dev/tty1?

View 6 Replies View Related

Fedora :: Cold Boots Often Take Up To 10 Attempts Before The Computer Successfully Boots?

Oct 29, 2010

my desktop pc is acting very strange. cold boots often take up to 10 attempts before the computer successfully boots. after the 1st successful boot, i can expect 1-3 "glitches". here's what happens:

the first few cold boots fail at various points during the boot process. there appears to be no pattern to it. when it happens, the machine is completely locked up. it responds to nothing, except holding in the power switch for 5 seconds. i'll go through this procedure several times.

finally, it will boot all the way to a desktop. from there, once i log it, i can expect it to lock up completely, usually once or twice. and then, finally, the screen will go blank and it will suddenly be back at the login screen.

usually, once i log in that last time, it's at least usable, although hardly stable. watching flash video seems to cause a complete lockup, with the sound looping. it doesn't matter where the content is coming from (videos or similar) nor does it matter which browser i'm using (firefox or chrome). i've stopped visiting videos-type sites in the meantime.

this installation has always been a tad bit screwy. 99% of the time, firefox fails to shut down properly, resulting in a message letting me know that a crash was detected. earlier today, i was alerted to 3 kernel crashes simultaneously.

right now, i'm using the pc, as normal. the random nature of the problems would lead me to believe it was hardware-related, specifically something like memory (ram). however, i installed memtest86+ and ran it. i walked away for 4+ hours. came back, it was running, no errors were found. i stopped the test and booted, trouble-free.

the pc seems to be stable enough for a backup, but this does have me concerned...obviously. i'm debating wiping the drive clean and installing f13, just as a test. if it's screwy as well, it would have to be hardware-related, wouldn't you think??

View 14 Replies View Related

Ubuntu Installation :: After Installation Automatically Boots Into A Black Screen With Blinking Cursor?

Jun 24, 2010

Problem-PC automatically boots into a black screen with blinking cursor. No message or nothing

I have 4 HD. Primary drive has Windows Vista, Secondary no OS installed. Sata1 HD Ubuntu 10.04, Sata2 Windows 7. Prior to installing windows 7 all was perfect but once I did it, grub got all screwed up. The only way I can boot into grub is if I manually select my Sata1 which has Ubuntu on it and only then it allows me to select Linux or Windows OS. How can I change that so it can boot up normally as before? I'm assuming that grub was installed in the primary drive which has vista on it, but once I installed windows 7 it got deleted and when I tried reinstalling Ubuntu, the grub was not installed in the primary drive.

View 9 Replies View Related

Ubuntu Installation :: Boots To Grub Prompt After Installation Upgrade

Jul 10, 2010

I installed 10.04 clean on the PC.Not other operating system.It booted to Ubuntu fine after the install and all appeared to be working fine.Used the upgrade manager to install the upgrades to the basic system.I had not yet loaded in any non-ubuntu or medibuntu repositories so this was the first, basic upgrade.After the upgrade,I can no longer boot to Ubuntu but boot to a grub prompt instead.I presume this is a recover prompt. How do I "recover" and continue booting to Ubuntu?

View 8 Replies View Related

Ubuntu Installation :: Boots Into Terminal Not Os?

Mar 15, 2011

so i just got ubuntu so i updated it then installed the wirless card drivers and nvida card drivers i then had to restart so when it re starts it is not at the log in screen like normal it is like in the terminal and then asks me for the log in name so i type it hit enter and then it asks for password so i type it in hit enter and then it says packages can be updated the updates are security up dates then it wants me to type a command in what do i do

View 3 Replies View Related

Ubuntu Installation :: 10.10 Only Boots Into Recovery?

Aug 9, 2011

I have a new (for me) computer (Its a Dell Dimension 9200) that I have put my hdd in with its Ubuntu install. The hdd works just fine when booted in my kpc shuttle but does not boot properly in the Dell. I can get a grub menu when I pull the power cord and then reboot. If I select recovery mode, I can get a graphical desktop with the failsafe graphics options or a command line. When I reboot after recovery mode, I do not get a grub menu (even if I press shift during boot) and all I get is a black screen with a blinking cursor. The monitors then go blank and act like they are no longer connected to the computer.

View 9 Replies View Related

Ubuntu :: Using Tty1 - Possible To Do More Than One Thing

Jun 18, 2010

I'm using tty1. Lets say I am listening to music there can't I do another thing at the same time read or writing to files or plus can the default login take me there instead of tty8.

View 1 Replies View Related

Ubuntu :: How To Change Tty1 Look

Nov 14, 2010

I am remastering Ubuntu 10.04 and would like to know if I can change the look and feel of tty1. Instead of having simple text based look can I add background image or customized the entire look of it?Just like with OpenSuse or currently I am using BackTrack. [see the attached images].Also does any aware how to keep permanent changes in Kmenu. I need to add my own menus; Kemuedit does provide you that option by not sure how to make that persistent or how can I replicate those changes on my live CD which I am remastering.

View 1 Replies View Related

Ubuntu Installation :: Karmic Boots - Xp Won't - Error 13

Jan 7, 2010

I installed Karmic on a newly formatted hd. Xp is on another. When I boot, KK comes with no problem. But, I get and error 13 when I try to access xp. Here is the result of the boot info script.

[Code]....

View 2 Replies View Related

Ubuntu Installation :: Installed, But Still Boots Straight To XP?

Jan 11, 2010

I've searched and haven't found a solution for this one yet, but here goes. I took a 160GB hard drive and split it into 4 partitions, 1 for Windows XP, 1 for Ubuntu, 1 for swap and 1 for future use (possible Hackintosh installation??).I installed Windows XP first, downloaded all my updates, etc. Then, I installed Ubuntu 9.04 and selected the Ubuntu partition. After installing it, when I reboot the machine, it just boots straight into Windows XP, and it doesn't give me the option to choose which installation I want to use.I wanted GRUB; I know the installation is there because when I boot with the LiveCD, it shows up

View 3 Replies View Related

Ubuntu Installation :: 9.10 - 10.04 Only Boots To Maintenance Mode

Apr 26, 2010

Poston my phone, so forgive the formatting. i just ran the ug to 10.04 from karmic and it appeared to run fine (no errors.) system rebooted and i get a "general error mounting filesystems" and then dumped to maintenance mode. root and swap mount successfully, but root is read only. is there any way to fix this short of a reload. i don't have a second pc very handy at the moment.

View 2 Replies View Related

Ubuntu Installation :: 10.4 Just Boots To Login Prompt?

May 24, 2010

I installed 64 bit Lucid Lynx last week. There were some issues with the grub boot manager and my windows boot manager. However, about half the time i would boot to reach only a login prompt. If i used CTRL ALT DEL i would then reboot usually into the GUI.So now i only reach a login prompt all the time. How do i get the the GUI to run automatically?

View 4 Replies View Related

Ubuntu Installation :: 10.04 (64bits) Boots Sometimes But Most Often It Doesn't

Sep 23, 2010

The problem i have is that after sucessfully installing Ubuntu 10.04 (64bits) when i start my PC and i get to grub2 and select Ubuntu it will get stuck at a blank screen with only an "_" flickering on the top of the screen. At first i thought "Hey, maybe it just takes a while to boot" but after letting it sit there for about 20 minutes and nothing happening i decided to restart my PC. And then the same thing happened like 5 times. BUT on the 6th try it booted sucessfully! And everything was working perfectly but as soon as i restarted my PC i would encounter the same problem.

Details I should probably mention that i had the exact same problen on the install process. I tried with a CD i had burned the image on and it would show me install options (Try and install, install, etc.) But when i selected either one of those i would get the "_" flickering and nothing ever happening. Then i tried it with a DVD thinking that the CD was the issue. Same thing. After that i tried with a USB drive and i would get the same exact problem, but on the retry on the USB drive the planets aligned in such a way that i actually got the Virtual Ubuntu loaded from my USB drive.

So it installed sucessfully and when i restarted it i got to GRUB and selected Linux and the "_" would start showing and nothing ever happens. On the <random number> of restarts it actually launched and it picked up my audio, video cards, other NTFS drives, etc. But when i restarted i would get the problem again. I even went trough the whole install process AGAIN (getting it to read from the USB flash drive, starting on Ubuntu) and still no consistent results. Though on the second install it didn't pick up my audio hardware nor my other NTFS drives until the second restart where i was able to use Ubuntu normally. I even upgraded what it told me to upgrade. (now i have two "different" versions of ubuntu on grub, each with it's own safe mode only different by a .24 and a .25 on their names) and right after upgrading and restarting it booted immediately. But after that i'm getting the same issue over and over again.

[Code]...

View 8 Replies View Related

Ubuntu Installation :: Boots Only After A WinXP Reboot?

Oct 29, 2010

I tried to install ubuntu 10.04 on a desktop in dual boot with win XP. Ubuntu doesn't boot. It only happens after a reboot of win XP. I upgraded to 10.10 but nothing changed, i made a clean install but still it happens..I mean:

1. Power on
2. grub -> ubuntu
3. splash screen freezed
otherwise:
1. Power on
2. grub -> WinXP
3. reboot
4. grub -> ubuntu
5. ubuntu run perfectly

View 1 Replies View Related

Ubuntu Installation :: 10.10 Always Boots Kernel 2.6.32.24-generic?

Jan 9, 2011

I just noticed I'm not running with the latest kernel.

This box was originally installed as Ubuntu 10.04, then upgraded to 10.10.

I just recently noticed that, even though kernel 2.6.35-24-generic is installed, this box seems to insist on booting up with 2.6.32-24-generic.

Looking at /boot/menu.lst, it looks ok. (default is 0, and first kernel in list is 2.6.35-24. 2.5.32-24 is the *last* one in the list!)

View 3 Replies View Related

Ubuntu Installation :: 11.04 Boots , Login , Then Freezes / Fix It?

Jun 18, 2011

I recently learned that you can upgrade your version without downloading and burning a cd. So I upgraded from 10.04 to 11.04 and now can not use my computer. It will boot up display the log in screen and I can log in. But when it loads up as soon as I try and do anything the computer will completely freeze. I am not really sure what is going on. I do have a somewhat older machine but I have above the minimum requirements to run 11.04 so I was wondering if anyone else has had this problem. Also I can easily boot into the 10.04 cd so I would like to know the path to back up all my documents and photos just in case I need to reinstall the older os.

View 2 Replies View Related

Ubuntu :: Stuck In TTY1 Mode

Jan 9, 2011

Running Ubuntu 10.10 Maverick.Tried to do some nvidia config stuff, pressed Ctrl + Alt + F11, went to TTY1 mode.startx doesn't work anymore, responds with weird stuff like, "closing log....giving up".Looked online already, nothing works.Already uninstalled the ubuntu desktop, and reinstalled it. Did the dpkg x.confg files.

View 4 Replies View Related

Ubuntu :: Startup Tty1 Instead Of X Console?

Mar 4, 2011

I want to use Ubuntu to build an information terminal. This will basically be an X application that displays interesting information. I has to be lightweight seeing that it is installed on compact flash memory.I started with a 10.04 command line install and added xserver-xorg. Please note I am not using a window manager or desktop environment; bare bones X only. I have created a /etc/init.d/myapp file which can start my application by calling "/usr/bin/xinit ${MYAPP}". I used update-rc.d to create a symlink in rc2.d that points to /etc/init.d/myapp. Here is my problem:

On startup the application runs but the system sometimes switches to tty1 (virtual console 1) instead of displaying the X console. I then have to manually switch to it by pressing Ctrl-Alt-F7. How can I make it *always* display the X console with my application? Another thing I noticed is sometimes the X server runs on virtual console 7 and other times on 8. I though that X starts on the first available console and Ubuntu has 6 ttys configured by default. So I would expect it to always run on 7, like and ordinary Ubuntu desktop.

View 1 Replies View Related

Ubuntu :: Tty1 Loading The Resolution Is Really Big?

Apr 15, 2011

I have ATI driver and everything works great on GUI mode. but when I switch to tty1 or even while loading the resolution is really big. each letter shows really big that the screen can only fit a small paragraph. how can I change this with out effecting the resolution of gdm cause I like it the way it is.

View 1 Replies View Related

Ubuntu :: How To Boot Directly In Tty1?

May 1, 2011

Ok i start to find it boring to ALT+CTRL+F1 each time i want that when i boot it directly go to tty 1. But i also want it to load desktop environment, but not to show it, only load it, so if i ALT+CTRL+F7, it goes to desktop environment. If its not loaded, it will not go to desktop environment or it will take like 15 sec to load it, this is why i want to load it while i am in the terminal.Also, how can i switch resolution in terminal?

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved