I installed Karmic on a newly formatted hd. Xp is on another. When I boot, KK comes with no problem. But, I get and error 13 when I try to access xp. Here is the result of the boot info script.
[Code]....
Error during commit 'E:Internal Error, Could not perform immediate configuration (2) on mountall' Restoring original system state
Yeah...that's what I get every time I try to upgrade to lucid lynx.
NOTE: I haven't updated for quite some time. I may have gotten one or two updates for karmic but that was it. Just thought it might be important....
NOTE: Also not sure if this is important, but karmic installed and did some funny stuff to itself. My desktop no longer exists. It just isn't there. Also, when I try to turn of my computer it gets all kinds of errors and eventually I have to just pull the plug....something about a dev loop0 right after is says its deactivating swap...
I've had a problem doing updates to Ubuntu 9.10 Karmic for months. I'd like to upgrade, but figure I should solve the update issue first. The output of "apt-get update" is:
[Code]....
I just tried installing Karmic (9.10) on an IBM ThinkPad t40. I've run various Linux distros on this laptop without incident, but now after doing a full install, I can't boot the system. Here's the error I get:error:no such device (then a long string that looks like UDMI)I have access to the GRUB default menu and the GRUB prompt. I've read the GRUB documentation as well as various threads here, but I honestly don't know what I'm missing here.
View 1 Replies View RelatedI have tried to keep away from posting this seeing how many have had the same problem but this is getting to the point of me just selling my computer out of shear frustration. Ive got Windows XP and Ubuntu 10.04lts. For a while they all ran fine together till my Windows drive gave out and ever since I tried to remove the drive GRUB recovery has been popping up. I even tried to put the drive back in and the computer still wont boot anything. Ive got 4 different live boots and neither one works, Ive tried to boot with my internal dvd drive and a usb one, there is always a Grub error. When I put in the ls command and find my only non"unknown filesystem" it still says "bad filename". I guess where im getting at is grub wont even let me reformat my computer or boot from anything without saying "no such device: 32d98-e0b3-451b-809b-ae6562ccb701"
View 3 Replies View Relatedmy desktop pc is acting very strange. cold boots often take up to 10 attempts before the computer successfully boots. after the 1st successful boot, i can expect 1-3 "glitches". here's what happens:
the first few cold boots fail at various points during the boot process. there appears to be no pattern to it. when it happens, the machine is completely locked up. it responds to nothing, except holding in the power switch for 5 seconds. i'll go through this procedure several times.
finally, it will boot all the way to a desktop. from there, once i log it, i can expect it to lock up completely, usually once or twice. and then, finally, the screen will go blank and it will suddenly be back at the login screen.
usually, once i log in that last time, it's at least usable, although hardly stable. watching flash video seems to cause a complete lockup, with the sound looping. it doesn't matter where the content is coming from (videos or similar) nor does it matter which browser i'm using (firefox or chrome). i've stopped visiting videos-type sites in the meantime.
this installation has always been a tad bit screwy. 99% of the time, firefox fails to shut down properly, resulting in a message letting me know that a crash was detected. earlier today, i was alerted to 3 kernel crashes simultaneously.
right now, i'm using the pc, as normal. the random nature of the problems would lead me to believe it was hardware-related, specifically something like memory (ram). however, i installed memtest86+ and ran it. i walked away for 4+ hours. came back, it was running, no errors were found. i stopped the test and booted, trouble-free.
the pc seems to be stable enough for a backup, but this does have me concerned...obviously. i'm debating wiping the drive clean and installing f13, just as a test. if it's screwy as well, it would have to be hardware-related, wouldn't you think??
I have karmic 9.10 on a 250GB HDD and my 'STORAGE DRIVE' on a 1TB HDDThere is no dual boot - just karmic. Both HDDs are in Caddies.All has been well for many months. Suddenly Karmic will only boot if the STORAGE DRIVE is dis-connected.Karmic will boot if it is the only drive in the machine.The error message when both drives are in is:- Grub Loading Stage 1.5Please waitError 22blinking cursor and nothing else.....I have searched Google but despite many posts on this error message, I cannot find a similar issue where the machine won't boot.
View 1 Replies View RelatedI am getting an error after the self boot sequence when after X minutes the system auto boots the highlighted option in my case it is mint 7 after that screen an error comes up with Random numbers and letters then Stuck?
View 1 Replies View RelatedThe system is an old AMD Duron 650MHz that was dug out of the garbage, trying to set it up as a light duty server. I installed ubuntu 10.04 with no errors or troubles during the install, however whenever the system is booted it sits at a cursor for about a minute then goes into busybox giving the error "Gave up waiting on root device." and says that the hard drive does not excist. If I sit at busybox for about another minute and type exit it then boots ubuntu 10.04 with no errors or issues.
View 7 Replies View RelatedProblem-PC automatically boots into a black screen with blinking cursor. No message or nothing
I have 4 HD. Primary drive has Windows Vista, Secondary no OS installed. Sata1 HD Ubuntu 10.04, Sata2 Windows 7. Prior to installing windows 7 all was perfect but once I did it, grub got all screwed up. The only way I can boot into grub is if I manually select my Sata1 which has Ubuntu on it and only then it allows me to select Linux or Windows OS. How can I change that so it can boot up normally as before? I'm assuming that grub was installed in the primary drive which has vista on it, but once I installed windows 7 it got deleted and when I tried reinstalling Ubuntu, the grub was not installed in the primary drive.
I installed 10.04 clean on the PC.Not other operating system.It booted to Ubuntu fine after the install and all appeared to be working fine.Used the upgrade manager to install the upgrades to the basic system.I had not yet loaded in any non-ubuntu or medibuntu repositories so this was the first, basic upgrade.After the upgrade,I can no longer boot to Ubuntu but boot to a grub prompt instead.I presume this is a recover prompt. How do I "recover" and continue booting to Ubuntu?
View 8 Replies View Relatedunable to install initramfs-tools error in Karmic I'm having a devilish time installing Karmic on my AMD 64-bit.
Today's missive is:
"Unable to install initramfs-tools."
"Check /var/log/syslog"
After a trying to fix a corrupted 9.04, I have attempted repeated installs of 9.10 on a completely reformatted clean drive. I can get the live CD working, but when I try the permanent install, using the guided full drive install, it stopped at "Unable to install initramfs-tools." and halts the base system install. I can't find anything on this for Karmic and Launchpad says it was superseded.
Can I skip this and go on? It showed a install list going forward, but if I can't put in the base system, how do I proceed? I've burned 2 9.10 disks, a new 9.04 disk, downloaded 9.10 via package manager while in Live CD and get errors on all during the install process. the check sums match on D/L, but I can't figure how to do a chksum after it's burned to disk. The file sizes do match, but when I go for the install something always halts it at different steps with different errors. No joy.
When I try to configure a printer, I get the message "CUPS SERVER ERROR"- The CUPS scheduler is not running-my printer a (LEXMARK all in one X2600)and worked fine since ubuntu 8.04..But now it doesnt work.Lexmark even provide a linux driver.
View 9 Replies View RelatedBeen using Ubuntu Karmic 9.10 for a few months- but now it has a mind of its own. About a week ago, Firefox would crash for no apparent reason. Then it became an increasing event. Today, after using the machine normally for several hours, it started crashing Firefox and Yelp before they loaded completely. It crashed again and again until it finally froze, I had to do a hard reboot and then it would not load properly and then crash. I checked the event logs and saw some warnings about an ALSA bug and then more as it deteriorated.Now it seems to boot but then when the Ubuntu logo shows up all it does is flash for a few minutes and then the screen goes black and the system freezes. I tried using the recovery disk, but after 1 1/2 hours of black screen it reported HD Error 0 and 6 Bus errors And finally ended with invalid user "Ubuntu"
Then I put in a fresh copy of Karmic and ran it in recovery mode. It didn't recover and from the machine I then tried a live CD and it booted to the black screen and froze And after I tried to do a new install I am getting lines and lines of errors like this [ 1047 .871988] SQUASHFS error: Unable to read data cache entry [27f21194] And about 1000 more similar. I ran a disc integrity check which found errors, I was going to just do a re-install, but when it started it froze and that's whats been happening. I don't know what to do at this poit because All I can think about is the data I will lose if I have to slick the drive AGAIN to get this sucker working.
so i just got ubuntu so i updated it then installed the wirless card drivers and nvida card drivers i then had to restart so when it re starts it is not at the log in screen like normal it is like in the terminal and then asks me for the log in name so i type it hit enter and then it asks for password so i type it in hit enter and then it says packages can be updated the updates are security up dates then it wants me to type a command in what do i do
View 3 Replies View RelatedI have a new (for me) computer (Its a Dell Dimension 9200) that I have put my hdd in with its Ubuntu install. The hdd works just fine when booted in my kpc shuttle but does not boot properly in the Dell. I can get a grub menu when I pull the power cord and then reboot. If I select recovery mode, I can get a graphical desktop with the failsafe graphics options or a command line. When I reboot after recovery mode, I do not get a grub menu (even if I press shift during boot) and all I get is a black screen with a blinking cursor. The monitors then go blank and act like they are no longer connected to the computer.
View 9 Replies View RelatedI have a new install of Karmic (not an upgrade) on my home network. All the other machines are XP sp2 or sp3. I have the following line in /etc/fstab:
Code:
//desktop/ddrive /home/dram/aDesktop-D cifs credentials=/etc/credentials.dt,nobrl,uid=1001,gid=1001 0 0
[code]....
I've searched and haven't found a solution for this one yet, but here goes. I took a 160GB hard drive and split it into 4 partitions, 1 for Windows XP, 1 for Ubuntu, 1 for swap and 1 for future use (possible Hackintosh installation??).I installed Windows XP first, downloaded all my updates, etc. Then, I installed Ubuntu 9.04 and selected the Ubuntu partition. After installing it, when I reboot the machine, it just boots straight into Windows XP, and it doesn't give me the option to choose which installation I want to use.I wanted GRUB; I know the installation is there because when I boot with the LiveCD, it shows up
View 3 Replies View RelatedI installed karmic on a dell vostro 1000 - all went well until I installed updates and restarted. Ubuntu booted to tty1 instead of tty7. I'm not entirely sure what changed, but I could do one of 2 things. at the login prompt on tty1 I could wait about 2+ minutes and it would boot to tty7 w/o my network card (but keeping the wireless) or I could ctrl+alt+f7 and get to the normal tty7 with everything working.After a bit of looking around, i found a few solutions, but the problems were not exactly like mine.- I could reinstall gdm (I did this and it had no effect)- I could install minigetty and do something else (not to sure what they wanted here)- I could remove usplashIt turned out that removing usplash did the trick...I dont get the cool little white logo over a black screen
View 1 Replies View RelatedPoston my phone, so forgive the formatting. i just ran the ug to 10.04 from karmic and it appeared to run fine (no errors.) system rebooted and i get a "general error mounting filesystems" and then dumped to maintenance mode. root and swap mount successfully, but root is read only. is there any way to fix this short of a reload. i don't have a second pc very handy at the moment.
View 2 Replies View RelatedI installed 64 bit Lucid Lynx last week. There were some issues with the grub boot manager and my windows boot manager. However, about half the time i would boot to reach only a login prompt. If i used CTRL ALT DEL i would then reboot usually into the GUI.So now i only reach a login prompt all the time. How do i get the the GUI to run automatically?
View 4 Replies View RelatedThe problem i have is that after sucessfully installing Ubuntu 10.04 (64bits) when i start my PC and i get to grub2 and select Ubuntu it will get stuck at a blank screen with only an "_" flickering on the top of the screen. At first i thought "Hey, maybe it just takes a while to boot" but after letting it sit there for about 20 minutes and nothing happening i decided to restart my PC. And then the same thing happened like 5 times. BUT on the 6th try it booted sucessfully! And everything was working perfectly but as soon as i restarted my PC i would encounter the same problem.
Details I should probably mention that i had the exact same problen on the install process. I tried with a CD i had burned the image on and it would show me install options (Try and install, install, etc.) But when i selected either one of those i would get the "_" flickering and nothing ever happening. Then i tried it with a DVD thinking that the CD was the issue. Same thing. After that i tried with a USB drive and i would get the same exact problem, but on the retry on the USB drive the planets aligned in such a way that i actually got the Virtual Ubuntu loaded from my USB drive.
So it installed sucessfully and when i restarted it i got to GRUB and selected Linux and the "_" would start showing and nothing ever happens. On the <random number> of restarts it actually launched and it picked up my audio, video cards, other NTFS drives, etc. But when i restarted i would get the problem again. I even went trough the whole install process AGAIN (getting it to read from the USB flash drive, starting on Ubuntu) and still no consistent results. Though on the second install it didn't pick up my audio hardware nor my other NTFS drives until the second restart where i was able to use Ubuntu normally. I even upgraded what it told me to upgrade. (now i have two "different" versions of ubuntu on grub, each with it's own safe mode only different by a .24 and a .25 on their names) and right after upgrading and restarting it booted immediately. But after that i'm getting the same issue over and over again.
[Code]...
I tried to install ubuntu 10.04 on a desktop in dual boot with win XP. Ubuntu doesn't boot. It only happens after a reboot of win XP. I upgraded to 10.10 but nothing changed, i made a clean install but still it happens..I mean:
1. Power on
2. grub -> ubuntu
3. splash screen freezed
otherwise:
1. Power on
2. grub -> WinXP
3. reboot
4. grub -> ubuntu
5. ubuntu run perfectly
I just noticed I'm not running with the latest kernel.
This box was originally installed as Ubuntu 10.04, then upgraded to 10.10.
I just recently noticed that, even though kernel 2.6.35-24-generic is installed, this box seems to insist on booting up with 2.6.32-24-generic.
Looking at /boot/menu.lst, it looks ok. (default is 0, and first kernel in list is 2.6.35-24. 2.5.32-24 is the *last* one in the list!)
I recently learned that you can upgrade your version without downloading and burning a cd. So I upgraded from 10.04 to 11.04 and now can not use my computer. It will boot up display the log in screen and I can log in. But when it loads up as soon as I try and do anything the computer will completely freeze. I am not really sure what is going on. I do have a somewhat older machine but I have above the minimum requirements to run 11.04 so I was wondering if anyone else has had this problem. Also I can easily boot into the 10.04 cd so I would like to know the path to back up all my documents and photos just in case I need to reinstall the older os.
View 2 Replies View RelatedWhat's the right direction or give me step by step on how to do this?
View 6 Replies View RelatedI have just installed Karmic on a dual boot system with XP and Ubuntu on separate drives.This set up worked ok with Jaunty. When the boot menu comes up, selecting Linux results in a successful boot. Selecting "Windows XP home edition (on /dev/sda1)" results in the screen changing to blank with the word "Grub" in the top left corner and no further progress.No error codes associated with this message. I've tried suggestions I've seen in various threads but have had no success.
Below is the contents of menu.lst:
# menu.lst - See: grub(, info grub, update-grub(
# grub-install(, grub-floppy(,
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
[Code]...
I installed 9.10 with wubi and lately I had a boot problem with the result is that it boots to a grub prompt. I tried several commands, but no success. I thought I hosed the system. [URL]. Once I copied the new wublidr file over, that did it! Give it a shot, as it works.
View 1 Replies View RelatedAfter upgrading from 9.10 to 10.04 my System no longer boots. I had a Dual-Boot System. On Boot I get - "error : the symbol 'grub_puts_' not found grub rescue> (prompt):
If I run 'insmode /boot/grub/normal.mod' (I get the same error)
If I run 'insmode /boot/grub/ext2.mod' (I get 'The symbol 'grub_xasprinf' not found)
If I run ls /boot (The Kernel File Names look Ok)
If I run in Rescue Mode it Reports (The installer could not find any partitions, so you will not be able to mount a root file system. This may be caused by the Kernel failing to detect your hard disk drive or failing to read the partition table, or the disk may be unpartitioned. If you wish, you may investigate this from a shell in the installer environment.) I ran the recommended reporting script and got the following output:-
Code:
= Boot Info Summary: =
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in partition #4 for /boot/grub.
=> Windows is installed in the MBR of /dev/sdb
=> Syslinux is installed in the MBR of /dev/sdd <<< This is my USB Flashdrive .....
This is effecting fsck check too as it will freeze up till I hit escape. After which it runs fine at boot up. It has drove me batty trying to correct. Worked on 8.04 but my Alfa wireless usb would not run on that Kernel. Up graded to 8.10 worked fine no Alfa wirless. Last upgraded to 9.04 Alfa working great but boot up is not right?
View 2 Replies View Related