Ubuntu Installation :: Boots Only After A WinXP Reboot?

Oct 29, 2010

I tried to install ubuntu 10.04 on a desktop in dual boot with win XP. Ubuntu doesn't boot. It only happens after a reboot of win XP. I upgraded to 10.10 but nothing changed, i made a clean install but still it happens..I mean:

1. Power on
2. grub -> ubuntu
3. splash screen freezed
otherwise:
1. Power on
2. grub -> WinXP
3. reboot
4. grub -> ubuntu
5. ubuntu run perfectly

View 1 Replies


ADVERTISEMENT

Ubuntu Installation :: Boot Sector Is Corrupt And WinXP Faces Reboot Loop After Trying To Install?

Sep 16, 2010

I tried to help my friend install Ubuntu 10.04 side-by-side with Windows XP on his Acer Aspire One netbook.Unfortunately, the installation process came to a standstill and it quit due to "unexpected errors". The second time I started the installation, I realized that the option for installing side by side was gone and that I could not mount the C: partition on Ubuntu. The error message is listed below:====================BEGIN ERROR MESSAGE======================Error mounting: mount exited with exit code 12: Failed to read last sector (299982847): Invalid argument

HINTS: Either the volume is a RAID/LDM but it wasn't setup yet,
or it was not setup correctly (e.g. by not using mdadm --build ...),
or a wrong device is tried to be mounted,

[code]...

View 8 Replies View Related

Ubuntu :: Installed On USB, WinXP No Longer Boots?

May 23, 2010

I installed Ubuntu 10.04 on a USB hard drive after booting the desktop installer ISO on a USB flash stick. My laptop already had Windows XP installed on the internal hard drive and i did not load Ubuntu onto that disk. I can no longer boot the Windows OS. My laptop shows a grub rescue prompt with "no such device" error. I can mount the internal hard disk ("system drive") and see all the Windows files from within the Ubuntu desktop installer. Is there a way to restore my Windows system drive to boot or do I need to reinstall?

View 3 Replies View Related

Ubuntu Installation :: Dual Boot Remix With WinXP Now WinXP BSOD On Boot?

Sep 12, 2010

I just installed Ubuntu Remix 10.04 on my wifes MSI U100 netbook. I did a dual boot just in case she had to get into Windows for something. I let the install automatically partion (did the side by side option). Anyway, Ubuntu works fine and imported all her documents and stuff. Problem is Windows XP won't boot. The first time I tried to boot Windows XP I got a message saying the hardware had changed and I had to select safe mode, normal boot, last known good, etc... I booted normally. I got the splash screen followed by a quick flash of BSOD and a reboot. I does this no matter how I try to boot Windows (safe, command prompt, etc). Anyone have any idea what the problem is?

View 3 Replies View Related

Ubuntu :: Put In Hibernation Then Reboot And Resume When It Boots Back?

Aug 13, 2011

Is there a way to put Linux in hibernation, then reboot and resume when it boots back?

This would be amazing in combination with dual booting.

View 1 Replies View Related

Ubuntu Servers :: Cold Boots Fine But Get 'Gave Up Waiting For Root Device' On Reboot

Mar 31, 2011

Recently setup Ubuntu Server 10.10 on an old Dell Poweredge 2650. It seemed to be working perfectly until I did my first reboot. I tried changing the 'root' reference on the linux line at the grub menu with no luck. I suspect the problem is something else but I have no clue.

So far the behavior seems completely consistent. If I physically power the machine down and start it back up everything works perfectly. However, if I do a sudo reboot now I'll end up at the initramfs prompt. I'm not comfortable setting up my dev environment on this box until I'm sure it will be stable. In case it matters the machine is running a single scsi drive and doesn't have a raid controller.

View 6 Replies View Related

Ubuntu Installation :: Can't Find WinXP Partition

Apr 19, 2011

So I recently started using Windows 7, but it kept crashing so i thought "OK back to WinXP and Ubuntu 10.10" So I installed Windows (urrrggh) and that went fine, but now that I have come to installing Ubuntu Desktop 10.10, it cant seem to find the Windows XP partition, I tried manually editing partitions but it wouldnt let me resize the partition. But it did give me the option to install the Bootloader (GRUB) to the partition labelled "Windows XP Professional".

I have used this setup before and ran fine, bare in mind that was with 9.10, maybe I should install 9.10 and then use "sudo apt-get install dist-upgrade"?If i cant get this working I will try another distro and see if its Ubuntu or whether its a Windows or disk issue.

View 5 Replies View Related

Fedora :: Cold Boots Often Take Up To 10 Attempts Before The Computer Successfully Boots?

Oct 29, 2010

my desktop pc is acting very strange. cold boots often take up to 10 attempts before the computer successfully boots. after the 1st successful boot, i can expect 1-3 "glitches". here's what happens:

the first few cold boots fail at various points during the boot process. there appears to be no pattern to it. when it happens, the machine is completely locked up. it responds to nothing, except holding in the power switch for 5 seconds. i'll go through this procedure several times.

finally, it will boot all the way to a desktop. from there, once i log it, i can expect it to lock up completely, usually once or twice. and then, finally, the screen will go blank and it will suddenly be back at the login screen.

usually, once i log in that last time, it's at least usable, although hardly stable. watching flash video seems to cause a complete lockup, with the sound looping. it doesn't matter where the content is coming from (videos or similar) nor does it matter which browser i'm using (firefox or chrome). i've stopped visiting videos-type sites in the meantime.

this installation has always been a tad bit screwy. 99% of the time, firefox fails to shut down properly, resulting in a message letting me know that a crash was detected. earlier today, i was alerted to 3 kernel crashes simultaneously.

right now, i'm using the pc, as normal. the random nature of the problems would lead me to believe it was hardware-related, specifically something like memory (ram). however, i installed memtest86+ and ran it. i walked away for 4+ hours. came back, it was running, no errors were found. i stopped the test and booted, trouble-free.

the pc seems to be stable enough for a backup, but this does have me concerned...obviously. i'm debating wiping the drive clean and installing f13, just as a test. if it's screwy as well, it would have to be hardware-related, wouldn't you think??

View 14 Replies View Related

Ubuntu Installation :: Using GRUB To Boot WinXP On A Separate HD

Jan 6, 2010

I have been a happy little GRUB user for a while now, but now I want to use GRUB to boot a physically separate WinXP hard drive, and I can't seem to do that. Normally GRUB is easy, (I even have a nice splash screen of my own making). Its a champion solution for booting into Ubuntu Linux on /dev/sda5 or Win XP on /dev/sda1.

My second HD which Linux recognizes as /dev/sdb, has a Win XP boot sector and Win XP in one partition.

Normally I boot off /dev/sda using GRUB, and from Linux I can mount and have access to /dev/sdb - that works well. Occasionally however, I need to boot the separate Win XP system on the second HD, and to do that I switch the boot drive in the BIOS, but lately that is getting to be a bit tedious.

Initially I though to give the additional boot choice to GRUB, I simply had to edit /boot/grub/menu.lst and point to the second HD (where /dev/sdb = hd1 in GRUB speak). Unfortunately, when I select the new choice, it simply boots Win XP off the first HD.

I'm confident GRUB does look at the first partion on hd1 as expected as I can induce an error by having hd1 disconnected, or write silly partion numbers into menu.lst. So if it does in fact find the first partion on hd1, why doesn't it boot? Why does it default to WinXP on hd0?

I have diligently tried physically swapping SATA drive cables and playing with bios switching and have messed about a fair bit with menu.lst to make sure I have drive and partition numbers right, but all to no avail. I have also tried changing rdisk(0) in boot.ini to rdisk(1) on the second drive when it is not the boot drive.

I'm afraid the only other thing I can think of is that the second hard drive requires a Linux boot sector if I am going to boot it up from GRUB, but somehow that doesn't make sense. Surely GRUB can work across physically separate drives, so I'm open to other ideas first.

View 5 Replies View Related

Ubuntu Installation :: Install 9.10 With WinXP Using NTLDR As Bootloader?

Jan 14, 2010

I first installed 9.10 from 9.10 Live CD to my Thinkpad X200 selecting not to install its bootloader thinking I could use NTLDR. That did not work at all. Tried bootpart, starting 9.10 from LiveCD to reinstall grup... I gave up and in WinXP, deleted the 9.10 partition and its SWAP partition.

I reinstall 9.10 again into the now freed space.This time I selected to install the bootloader but to /dev/sda5.After completing the installation,I rebooted to WinXP and used bootpart to create the necessart ubuntu.bin and instructions in boot.ini.That did not work. I went into 9.10 live CD again and use dd command to extract the fir 512bytes from /dev/sda5 and place it in a USB drive as ubuntu.bin.Rebooted into WinXP and put this new ubuntu.bin into C:. All I get when booting into Ubuntu is a blank screen...

View 9 Replies View Related

Ubuntu Installation :: Display Settings 800*600 To 1024*768 - Can't Get Winxp

Jan 31, 2010

I'm trying to setup my second computer as I think my first one is failing. I can only get my display to show 800*600 I want 1024*768 I also have this on a dual boot system but not showing any menu system so I can't get winxp How can I get a display of what my system is so I can post

View 1 Replies View Related

Ubuntu Installation :: Samba For File Sharing With WinXP PC?

Feb 5, 2010

Suppose I have installed a Ubuntu (UNR9.10) PC in my home LAN,-> am I right that I need to have Samba server installed before I can share folders & files (mainly large media files) in the harddisk of Ubuntu PC for read/write access by other LAN PC running WinXP?

-> am I right that Ubuntu PC cannot access (read or write) USB harddisk nor USB thumbdrive as formatted by WinXP? how about SD card through USB card reader? does UNR v9.10 contain Samba or do I need to install it separately after UNR installation? where can I find the instruction for installation and configuration of the samba server?

View 3 Replies View Related

Ubuntu Installation :: WinXP Or 7 As Guest On U9.1 Box - VMware Vs VirtualBox

Feb 12, 2010

I have on my computer 9.1 and I want to try some virtualization. I want to install WinXP or 7 as guest on my U9.1 box. what is your opinion? Which VMware or VirtualBox should I try?

View 1 Replies View Related

Ubuntu Installation :: Grub Won't Start WinXP / Make It Possible?

Jun 25, 2010

Here's today's problem: I upgraded to Ubuntu 10.04 and hope to have it run alongside Win XP PRO, which it had for months.

Only, when I select WinXP in GRUB, nothing happens. Oh the screen goes dark for a few seconds, but then the GRUB screen reappears. Ubuntu 10.04 functions correctly.

here are the contents of what I assume is grub.cfg code...

What I need to know is how to make GRUB load WinXP.

View 9 Replies View Related

Ubuntu Installation :: WinXP Not Shown In Migration Assistant?

Jul 27, 2010

I'm in the Live CD and I've followed the steps to the migration assistant. Where it should say "Windows XP Media Center Edition" it claims that "There were no other users or operating systems suitable for importing from"

Also, on the where to install to step, Where at the top it should say that another operating system is installed, it is blank.

I'm wondering if I continue the installation, on boot-up will it detect windows?

I have searched this, and after 15 pages of results, I have not come to a definite conclusion.

View 2 Replies View Related

Ubuntu Installation :: Multiboot Win7 Winxp 10.10 Beta?

Sep 17, 2010

I have used Ubuntu 8.x before side by side with win XP with absolutely no problems, today I have a windows 7 working great, but it was not enough for me so I've installed winXP on another NTFS partition, and then installed the Ubuntu 8, but the problem is that grub didn't detect windows 7 only detected Ubuntu and win xp ( and win XP under the name "windows Vista" !!). I did rename the win XP thing, not big thing, but there still the main problem of windows seven, it's not detected yet. So what I have done is downloading Ubuntu 10.10 beta and repeated the same thing after deleting the previous partition that Ubuntu 8 was on and created new one and used it. But the problem stays the same.

I have 80 GB - all one partition - windows 7
and 1 TB - 359 GB -storage
-26 GB - windows XP
-26 GB - Ubuntu 10.10
- ~4 or 5 GB - swap
-443 GB - storage

I know it's not organized enough but I couldn't do better using win7 storage management tool So what should I do to make windows 7 detected by grab and bootable, and I really don't want to format any drive,specially win7.

View 9 Replies View Related

Ubuntu Installation :: Neither BIOS Nor WinXP Recognize 10.10 Partition

Jan 21, 2011

I'm trying to install Ubuntu 10.10 on my WinXP desktop computer. I used the LiveCD and manually configured the partitions. I resized my XP partition (the entire SATA HDD) and created a 37GB partition for Ubuntu, as well as a 3GB swap file. I installed the boot loader on the Ubuntu partition. But BIOS doesn't recognize that the drive has separate partitions, and I can't boot into it from Windows either. I know I didn't modify WinXP's MBR, but should I have? I didn't know where it was.

I booted into the LiveCD again, and went into the disk manager. I Edited the Ubuntu partition and saw a checkbox that said "Bootable". I checked it and hit apply, hoping that might do it. I waited twenty minutes and the little circle was still spinning with no indication that it was actually doing anything or any warning of how long it would take, so I rebooted. Still no luck.

Someone told me that Ubuntu sometimes won't be bootable if you have both SATA and PATA drives in the system, which I do (although both XP and Ubuntu are on the same, SATA drive) and gave me a page that told me to use Grub4Dos. I fiddled around with that, only to come onto the Ubuntu website and find out that the page they gave me was outdated, before Ubuntu used GRUB2.

View 8 Replies View Related

Ubuntu Installation :: Can't Boot WinXP Pro From GRUB Menu

Mar 8, 2011

I've got an old Dell Precision 670 which has a SCSI disk. I installed 10.04 and everything worked fine - I could boot into 10.04 from the GRUB menu. I later added an IDE disk and installed WinXP Pro on it.

When I ran 'sudo update-grub', Lucid discovered the IDE disk and added a WinXP Pro entry to the GRUB menu. Now, though I can still boot 10.04 from the GRUB menu, I can't boot WinXP - the screen goes blank, and I have to hit Ctrl-Alt-Del to restart.

For what it's worth, here are the results of using boot_info_script055.sh:

Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Windows is installed in the MBR of /dev/sda
=> Grub 2 is installed in the MBR of /dev/sdb and looks on the same drive in
partition #1 for /boot/grub.

[Code]....

View 3 Replies View Related

Ubuntu Installation :: Dual Install, 2 HDD And Sees All WinXP Doesnt?

Jan 11, 2010

I have 2 Hard drives, the original 30GBs with Windows XP on it, My son put 2nd hard drive into pc as slave (400GB), no problems, WinXP recognised 2nd drive. This was all a way to give 'good ole Mum' a chance to muck about with Linux.Got a Linux Format Mag with Ubuntu 9.10 on it, amongst others, but this one I knew from previous use. I have installed it on the 2nd hard drive, not sure if I correctly (manually) partitioned but I put ( I believe) a home partition, a swap partition, left ( so I thought) a 3rd partition space, and said install. Ubuntu runs fine and see the small HD with WinXP but WinXP doesnt see the HD with Ubuntu, and I wanted to use the 3rd partition for the WinXp as I need to use that for Grant writting I do for not for profit organisations govt depts that I apply for grants from are MS freaks, that said, all runs ok but what have I done that wont let WinXP see to utilise the 3rd partition. Be kind, I have a load of senior moments these days

View 5 Replies View Related

Ubuntu Installation :: Resize NTFS Parition With Winxp Using Gparted?

Jan 11, 2010

I'm on a work desktop and im just wondering what the chances are of data loss if i resize my paritions i have 2 NTFS 1 10GB and 1 64GB (Not sure why but thats how it is) I want to take 30GB from the 2nd partition and add onto the main 10GB. Is it only Gparted that has a chance of Data Loss or is that with all parition editors, its just that alot of NTFS windows progams indicate that there software is safe like this one for example url.

View 3 Replies View Related

Ubuntu Installation :: Restore Partitions Removed From WinXP Tool?

Jun 6, 2010

I am having WinXP installed, and also installed Ubuntu 10.04, after so i wanted to remove Ubuntu 10.04, so i removed partitions from XP, disk management tool. The Ubuntu installtion partition also got removed. But also my two more drives also removed with the removal of Ubuntu partition.

After that i had restored XP bool loader by reparing the Installation of XP.

Now any one can tell me how to restore my other two drives, which i manually did not removed.

View 1 Replies View Related

Ubuntu Installation :: Dualboot: WinXP Won't Boot After Removing Old Kernel?

Jun 17, 2010

I have winxp and ubuntu 10.04 dualboot. They were working ok. Today I removed old *21 kernel image and headers so grub updated the confs. That's all I did that could cause the win no longer boot. It starts booting, the screen goes black and the PC reboots. I tried safe mode, it started to load some dlls as it usually shows in safe mode but then still reboot.

Code:
$ sudo fdisk -l
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

[Code]....

View 3 Replies View Related

Ubuntu Installation :: Dual Boot 10.10 With WinXP - RAID Got Corrupted

Oct 21, 2010

I originally wanted to dual install 10.10 64 Ubuntu with Windows 7 64 RAID 1 HP PC, but RAID got corrupted and I could find no fix online except using fakeraid unsupported software. The whole thing blew my muind. I gave up after 4 or so reinstalls of windows 7 to fix RAID. So I decided to install a dual boot 10.10 Ubuntu i86 with my old WinXP i86. I kept getting these errors at boot up: unknown filesystem, file not found, out of disk, no such partion and so on. I tried just about every grub reinstall I could find, including article here: "Recovering Ubuntu after Installing Windows."

After a number of tries my friend installed Ubuntu successfully, but then when I installed windows xp I am stuck here, again. I did do the Reload grub tutorials again as well. I may just give up on WinXP and have my friend reinstall Ubuntu for me.

[Code]...

View 9 Replies View Related

Ubuntu Installation :: Unable To Boot WinXP After Fresh Install

Oct 23, 2010

I have some proprietory softwares installed on WinXP so it is very important for my work that it is up and running.

I performed a FULL INSTALL from the Live-CD (10.10) and installed grub on the windows partition.
Now whenever I try to select the Windows option in the Grub menu, the screen goes blank and it gets me back to the Grub menu.

View 9 Replies View Related

Ubuntu Installation :: 'graphical' Grub Breaks On Win7/winxp/10.04

Jan 6, 2011

early tl;dr: The fancy grub breaks on my wubi 10.04 install, can I force it to use the old grub?

When I rebuild grub.cfg (last time was yesterday for kernel update to .37), and shut down / reboot, grub breaks because it can't 'loadfont' and a few other errors which are related to the 'graphical' grub boot menu.

To fix this I have to boot into a live CD (also Ubuntu 10.04) and run the following:
Taken from [URL]

Code:
sudo fdisk -l
sudo mkdir /win
sudo mount /dev/sda1 /win
sudo mkdir /vdisk
sudo mount -o loop /win/ubuntu/disks/root.disk /vdisk

[Code]....

I know how to fix it but is there a way to skip having to do this on upgrades
(If I edit the grub.cfg before shutting down then this doesn't happen, obviously, but sometimes I forget and this is the result. I'd rather stop the problem at it's source than fight against the updater).

View 1 Replies View Related

Ubuntu Installation :: Installed Winxp Alongside Win7 And Then 10.10, Can't Load Win 7?

Apr 13, 2011

When I load into winXP I can see the files for winXP and win7. When I load into ubuntu I can only see winXP. i did a sudo update-grub and got the windows loader, which then shows me winXP and ubuntu. what i would love is one boot page that has listed winXP, win7, and ubuntu. FWIW this is an acer netbook, winXP is on D:/ and win7 is on F:/, i used the windows installer wubi for ubuntu 10.10.

View 9 Replies View Related

Fedora Installation :: Reinstall WinXP After Installing 10

Feb 3, 2009

I have a dual boot system - WinXP and Fedora 10. I am happy with my fedora 10, but as usual the WinXP has lots of malware on it. So I wish to reinstall it and patch it up with a AV. Is it possible to reinstall WinXP without breaking the system - becoz AFAIK, installing will remove grub from the superblock and then there will be no way to reload fedora even if it is still there. Can't I copy grub and the partition table away and reinstall it from windows after the intallation completes? That way I shall have my dual boot system back as usual if I didnot do any changes to the partition table during the fresh windows installation.

View 11 Replies View Related

Ubuntu Installation :: Dual Boot Mint8/XP - WinXP Loading As A Read Only

Feb 22, 2010

WinXP Partition loading as a read only and can't fix it with PYSDM (storage device manager) Let me provide some history as to how everything was installed: From my old WIN XP hard drive I used clonezilla to clone the drive to a partition on my new hard drive for Linux. Windows is on SDA4 which is the last partition of the drive, it is mounted at sda4/windows using ntfs. I then loaded Mint 8 gnome on the 2nd partition sda2 using ext3 mounted at /, sda1 is my Linux swap, and sda3 is mounted at /home using ext3. While installing I selected to mount Linux ext3 at /

When I choose to load winXP from the grub boot loader I get dev/sda4 no such device 10CDR36778638F73. Also when I try to unmount from disk utility I get the following error: Error unmounting: umount exited with exit code 1: helper failed with: umount: only root can unmount UUID=10CDF36778638F73 from /windows Seemslike I need to rename the drive but it won't let me in disk utility.

My Problem is that within PYSDM (storage device manager) I uncheck Mount file system (sda4/windows) as a read only but it will not stay unchecked. I have unchecked it hit unmount and mount and it still is checked to mount as a read only. This is the code in options for sda4 in PYSDM (storage device manager) nls=utf8,umask=007,gid=46

View 1 Replies View Related

Fedora Installation :: Fc10 Cannot Access WINXP Through Network

May 28, 2009

I have a home network with 2 WINXP machines and one I am trying to load FC10 on. If I get FC10 to work, I will convert the others to FC10. I am trying to access the WINXP machines through my LAN. I have installed samba. I have gone through a lot of places to try to configure samba. Several places say I have to set the security level on the ethernet card using system-config-securitylevel. When I enter this in terminal, I get command not found. I checked with yum and it is installed. I have tried using the menus but cannot find it anywhere. I can see the FC workgroup from one of the WINXP machines but I cannot look into it. It says I don't have the right permissions. I would like to set it so I don't need a userid/password at all. Can I do this?

View 5 Replies View Related

Ubuntu Installation :: After Installation Automatically Boots Into A Black Screen With Blinking Cursor?

Jun 24, 2010

Problem-PC automatically boots into a black screen with blinking cursor. No message or nothing

I have 4 HD. Primary drive has Windows Vista, Secondary no OS installed. Sata1 HD Ubuntu 10.04, Sata2 Windows 7. Prior to installing windows 7 all was perfect but once I did it, grub got all screwed up. The only way I can boot into grub is if I manually select my Sata1 which has Ubuntu on it and only then it allows me to select Linux or Windows OS. How can I change that so it can boot up normally as before? I'm assuming that grub was installed in the primary drive which has vista on it, but once I installed windows 7 it got deleted and when I tried reinstalling Ubuntu, the grub was not installed in the primary drive.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved