Ubuntu Installation :: 3D Graphics With Lucid & ATI 9000?
May 6, 2010
I've tried various searches and haven't found anything quite matching this. Please forgive me if I am repeating though. I upgraded my Dell D600 (ATI Mobility Radeon 9000) from Karmic to Lucid. On Karmic, all 3D effects (Expo, Rotating Cube, etc.) worked fine. On Lucid, all still work but, once once enabled, the 3D effect is very dim - almost as if the backlight on the effect itself is turned off (i.e., when rotating the cube, the cube is dark but the background Skydome is illuminated). Once the effect is over, normal illumination returns. Running Karmic from the live disk and the effects are fine again. A buddy upgraded his D610 (next ATI in the line) and does not have the same issue.
View 3 Replies
ADVERTISEMENT
Jan 20, 2010
I have an ATI Radeon 9000 Graphics card that Ubuntu 9.10 doesn't seem to recognize no matter what I do. Knowing that its an older card and that ATI stopped support for it a while ago, I was wondering if anyone knows if I would have better luck on Ubuntu 8.04. I can't get 3d or opengl to work, or install the correct ATI Driver.
View 2 Replies
View Related
Jun 20, 2011
Last month I installed a newer MoBo + CPU and PSU, (See system specs in my signature) and moved from Maverick to Lucid 10.04.
I was running Natty 11.04 64bit up until a couple of days ago, but that was locking up like mad. I did a fresh install of 10.04 over the whole HDD yesterday...though cannot recall it asking me if I wanted 32 or 64bit...will neeed to check)
I'm using an ATI Radeon (Sapphire?) x1650 PRO graphics card - but borrowed from a friend as my previous card wouldn't fit in the upgrade motherboard. Ubuntu is running quite fast with it but often stutters when on Firefox or Chrome. With Natty the system would lock up at least once an hour, with Lucid - at the moment it's only locked up once in 6 hours... I'm assuming this is just problems with Ubuntu and not the card. I get no odd lines or color on the screen.
I'll need to give this card back at some point... I'm wondering if people could suggest other cards (Nvidia/ATI or other) that are known to work happily with Ubuntu 10.04. I've got a budget of around �40, but then I'm not gaming so guess shouldn't need anything too high spec. (My PSU has a PCI-E connector if needed...though doubt it will be!)
View 4 Replies
View Related
May 28, 2010
I've been meaning to get back into linux for a couple of years now.It seems I may have left it too long for my hardware.I'm struggling to freshly install lucid 10.04 onto a pc with an ATI 9200 graphics card.Can someone give a definitive answer on this - the internet is full of different solutions and I cannot get any to work.
View 9 Replies
View Related
May 7, 2010
I have been unable to get the fancy purple bootsplash (plymouth) since I installed Lucid Lynx on my ThinkPad T43. The bootsplash would up when I had booted off of a Live CD, but all future instances post-install only shows the blinking terminal cursor, followed by the GNOME log in screen. This has occurred after upgrading from Karmic, and after attempting a fresh installation of Lucid. Here's what I've tried so far without success:
comment out "GRUB_HIDDEN_TIMEOUT=0" in the grub file tried running echo FRAMEBUFFER=y > /etc/initramfs-tools/conf.d/splash update-initramfs -u under su but it did not work because my conf.d directory doesn't contain a file called "splash", but only one file called "resume". This fix was taken from [URL]..A Google search showed that a lot of users with this problem have NVIDIA cards; however I'm running ubuntu on a system with an ATI card.
View 7 Replies
View Related
May 7, 2010
It has been a long time i dreamed to get ubuntu and now i have my ubuntu 10.04 installed. I found similar posts in the forum but no one helped me out. i have a webcam Logitech quick cam pro 9000 and i tried to use it with skype 2.1 beta 2 i installed this morning. Well i can see the video but the microphone (build in the webcam ) does not work at all and it worked fine with windows. This is the lsusb command in the terminal :
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 005: ID 046d:0990 Logitech, Inc. QuickCam Pro 9000
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
So i think the webcam is connected well.
View 3 Replies
View Related
Dec 6, 2010
I am trying to get a Logitech Webcam (not Quickcam) Pro 9000 to work with my SUSE 11.2 installation (specifically trying to get it to work with Skype 2.1). I am using the KDE environment. I've been reading the many posts and seem to be getting the point that I need to install the UVC driver from the webcam driver repo. However, the link I found to the repo seems to be for SUSE 11.1...?
Anyway, here is what I have done so far:I ran the following commands and got the following output:
localhost:~ # lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 046d:0809 Logitech, Inc.
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[Code]...
View 4 Replies
View Related
May 15, 2010
This started yesterday.I have been running Lucid since the Beta release with no problems. Yesterday, I found about 20 or so updates ready for 10.04. I looked them over, mostly lib files, so I decided to go ahead and let them update. That evening I rebooted my machine before I left for the night, and it came up with the error "Ubuntu is running in Low Graphics Mode". In a word X is totally hosed. The display is cut just left of center, with part of the windows on the right carrying off the screen to come back onto the screen to the left.
I thought maybe Xconf might have been messed up, but not sure how. The updates I applied did not do anything to Xorg; and my understanding was that I didn't need that file because I am running with an Nvidia card. I tried to "reconfigure" the X settings from the error message, that did not work. I logged into a text only terminal, and copied a good backup of Xorg.conf back into place and rebooted. Same thing, still running in Low Graphics mode.
View 9 Replies
View Related
May 17, 2010
I just installed 10.04 Lucid Lynx and have a serious graphics problem. I've attached a picture to show the problem.
Some Background:
Pentium 4 3.06GHz
1.5GB RAM
ATI Radeon 9600
I installed via liveUSB but had to choose the "nomodeset" option by pressing F6. Otherwise after the Ubuntu boot screen the graphics went like that in the attached image. The installation went fine (took less than 15 minutes!) but after the reboot the graphics problem returned. I can't see anything and the system is useless this way. I can't post up any logs (I'm typing this from the liveUSB).
View 5 Replies
View Related
Jun 4, 2010
I'm having a weird problem with Lucid: whenever I boot my system, it seems to forget there's a graphics driver. The result is that windows don't have title bars, and anything involving fancy graphics is turned off.When I go to the "appearance" settings, I can go to "visual effects", select "normal", and the machine starts looking for a driver, which is found After that shading effects are once again on, but the windows still don't have title bars If I then start the Compiz settings manager, that window and any window that appears thereafter does have a title bar.That way my desktop configuration is pretty much how I want it. The problem is that after starting up again, all the wonkiness is back.
View 2 Replies
View Related
May 3, 2010
I am running Wubi 64 bit Lucid on a Toshiba Satellite A215 S7422. In Karmic I was able to use desktop effects on max, with cube desktops and all the bells. I can no longer enable them, and after running Compiz-check I received a fail on "Checking for hardware/setup problems." The given reason was "Software Razterizer in use." Any idea what the rasterizer is/does? Would disabling it affect any other processes?
PS: If anyone can link to an article explaining how to switch from W7 Bootloader to Grub 2 (Which I already have installed)
View 9 Replies
View Related
May 4, 2010
Upgraded to Lucid from Karmic last week or so, everything was fine. Today i needed to log into windows to set up some stuff, closed everything the ormal way, went to windows, came back and after Grub: Disaster! black screen, then corrupted graphics on top of the screen. Rebooted, same thing. Rebooted, went to recovery mode... same thing! No freaking idea whats going on, 9.10LiveCD works fine, but i have no idea whats going on.
My machine: ASUS N81V with ATI HD4670 graphics
Guess ill have to use windows for the time being... :S
Terrible Quality photo provided: [URL]
View 9 Replies
View Related
Jul 23, 2010
I honestly have no clue how this happened, but compiz now refuses to start. I discovered that somehow GLX had been uninstalled and replaced by SWX (the software rasterizer - this gives Brian Paul as the OpenGL/GLX server vendor strings). Reinstalled GLX, currently have Direct Rendering and the proper vendor strings (SGI and Tungsten, I believe).Still nothing. OpenGL seems to be working fine, as Nexuiz runs pretty well.I tried running compiz --replace from the terminal to get any errors, but it just spits out "Falling back to default window manager", without so much as a hex code to tell me why--------Update---------Ran compiz --debug --replace to see if I could get anything else. It gives the following:Quote:taintsauce@the-****ing-fury:~$ compiz --replace --debugcompiz (core) - Debug: Could not stat() file /home/taintsauce/.compiz/plugins/libcore.so : No such file or directorycompiz (core) - Debug: Could not stat() file /usr/lib/c
View 1 Replies
View Related
Jan 26, 2010
I have just installed Ubuntu (9.10) and noted that in order to successfully run the trial off the CD I had to test in "safe graphics" mode. I have an NVIDIA GEforce 6600 GT card - which was discovered by Ubuntu in the first few minutes of the trial and so I activated the recommended driver and continued to test. After a successful trial I installed Ubuntu (dual partition Ubuntu / Windows XP), however, it seems the install didn't activate the required driver (as part of the process) and so I'm unable to get into my newly-installed Ubuntu at all. All I get is a flashing tty screen asking for my username and password - however it's erratic and won't recognise what I type. So - I'm stuck in a catch-22 as there doesn't seems to be a safe graphics mode option via the start (GRUB?) menu list.
View 4 Replies
View Related
Jun 4, 2010
If I let my computer sit for about 10 minutes, I lose all the windows I had open (gnome) and i get a message saying I'm running in low graphics mode. I have to restart X in low graphics mode to get it to work. i can't tell the difference, but as an avid writer, I often feel the need to get up and think about whatever I have open in oowriter.
View 3 Replies
View Related
Oct 11, 2010
Ubuntu 10.04 how stable are the lucid-proposed and lucid-backports options in the software sources settings?
View 4 Replies
View Related
Apr 30, 2010
What's the procedure for updating from Lucid Beta 2 to Lucid LTS? Is it just "apt-get upgrade"? Or would I be better off with a clean install?
View 2 Replies
View Related
May 9, 2010
I recently upgraded from Karmic to Lucid via the Update Manager. I would like to upgrade further by switching from 32 Bit to 64 Bit. I downloaded the Lucid 64 Bit ISO and wrote an install disk. When I reboot the computer with the install disk nothing happens.
View 2 Replies
View Related
Jul 22, 2010
I'm having trouble getting this to work, everytime i pop it into the motherboard and start my computer it beeps at me and won't start, i'm thinking it probably just won't work but does anyone have any ideas that MIGHT make it work? i've downloaded the driver package off the ATI website and it doesnt seem to install anything. maybe possibly just hardware conflict??
View 7 Replies
View Related
Jun 17, 2010
I am getting a Logitech Webcam Pro 9000. How do I install it on Ubuntu 10.04 LTS?
View 5 Replies
View Related
Jun 17, 2010
I am getting a Logitech Webcam Pro 9000. How do I install it on Ubuntu 10.04 LTS? Isn't there a tutorial for this?
View 3 Replies
View Related
Aug 3, 2010
I have two computers--a Zareason machine (no details yet) running 8.04. I also have a Dell 1525N laptop running 9.10. I purchased recently a Logitech QuickCam Pro 9000 Webcam. The video works on both systems with Ekiga and Cheese. I can also see the video in Flash applications (but *not* in Meebo even with the other person logged into Meebo). (Both computers are running the latest Flash plugins).
However, the built-in microphone is problematic. With 8.04, I get playback when I test it under System|Preferences|Sound--but with lots of echo. But I get no sound with any Flash chat applications. I've not been able to test it with Ekiga as the testee (a Windows 7 user) can't get Ekiga to work on his machine (probable Windows firewall issues). I haven't installed Skype because Skype pulled its 8.04-compliant .deb packages and I've not tried yet to compile it from source code.
With 9.10, the webcam works with Cheese (video) and I can get both webcam and mic to work with Skype. (Again, no test result possible for Ekiga until I get a testee). However--my Win7 testee friend says that when I log into Googlechat using Pidgin on my 9.10 laptop, a webcam icon appears next to my userID telling him that I have an open webcam (even when there's NONE actually plugged in). He doesn't see the same icon when I log into my 8.04 desktop with no webcam plugged in. I have searched Pidgin and my System preferences and see no evidence that any of these applications or my system sees a webcam that's not there.
So--how to get the mic to work? (I am thinking the simplest answer will be to simply upgrade my desktop to Lucid). And also, why the webcam icon in Googlechat even when no webcam is plugged in on my 9.10 laptop??
View 4 Replies
View Related
Aug 22, 2010
Ubuntu 9.10
Quickcam Pro 9000
Logitech USB Headphones
[Code].....
I'm driven quite insane on why nothing is either working or teasing me. I DO NOT want to record on Windows. I have a lag problem with fps there, anway. Seems like guvcview is my best option, but I can't get it to detect anything.
View 9 Replies
View Related
Jan 23, 2011
I have been just pretty much having fun with Ubuntu and a couple other distros for a couple years and have not yet ran into a problem like this. I'm pretty good in a command line environment although I end up googling syntax a lot b/c of that wonderful memory I have! Anyways..
I am running an older machine: P4P800 ASUS Mobo, P4 2 Ghz, 3G RAM and an ATI Radeon 9000.OS: Ubuntu 10.10 Maverick Meerkat Issues: Seems that anything that Compiz has to render the brightness is really low. CairoDock (w/ OpenGL) does not render like it does on other machines that I have, looks like garbage. I've come to the conclusion that I need to get a better video driver (Hope I'm correct here otherwise I've been going the wrong direction for awhile now).
Things I've tried through research around the net: I've attempted installing fglrx(command line style) from several tutorials I've found here and there. Most of them for older versions of Ubuntu and if I'm remembering right there have been a few significant changes lately, which may be causing my issues? Of course I've tried the easy ways: Installed all fglrx/ati/radeon related packages in Synaptics Package Manager
Checked System > Admin. > Additional Drivers before and after package installations
Ati Website - the drivers that they have are for XFree86. I don't think they can run on XOrg - it's a completely different setup? Again, I don't have a great understanding on how the back end of all this works, so bear with em.
I ran: echo options radeon modeset=0 > /etc/modprobe.d/radeon-kms.conf To disable KMS.
Rebooted - Video was much worse I then ran: echo options radeon modeset=1 > /etc/modprobe.d/radeon-kms.conf To re-enable KMS Rebooted again. Everything ran fine but I didn't have my Cairo Dock > which I can deal with, that's not why I'm posting.. Well, that's a good chunk of it - there's more but I don't remember most of it as I've been working at this on and off for weeks. Again, a lot of this was tried upon researching anything and everything I could find on the net - so some of it might sound ridiculous, I was just trying anything that would work!!
View 2 Replies
View Related
Mar 14, 2010
I have an ATI All-In-Wonder 9000 AGP4x video card with TV tuner function. I following the description on [URL] where I found a how-to for enabling TV tuner. The tuner works in xawtv and avview but without sound. I plugged the cable in from tuner to my sound card and try to increase volume and/or enable mute on/off but nothing to hear. The sound card line-in input works correctly, because when I attaching my MP3 player I hear sound over the sound card. I think maybe have a register accessing/writing error which handle the TV Tuner sound chips to turn on/off. (the tuner works correctly in Windows XP). I'm using Ubuntu 8.04.4 LTS with x86_64 (amd64) actually. The lspci output for Video Card:
[Code]....
View 1 Replies
View Related
May 15, 2010
After having problems with an onboard graphics chipset I've just installed an ATI Radeon 128Mb 9000 Pro AGP graphics card into my old computer... The problem is that I can't get it to use 1440x900 resolution that my LG L194WT (Ubuntu won't detect it) requires and the highest I can select is 1360x768 and that looks all wrong
lspci gives:
Code:
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV250 If [Radeon 9000] (rev 01)
01:00.1 Display controller: ATI Technologies Inc Radeon RV250 [Radeon 9000] (Secondary) (rev 01)
And /var/log/Xorg.0.log gives:
Code:
X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
[code]....
View 1 Replies
View Related
Oct 2, 2010
i really love ubuntu and made an almost total switch to it 2 years ago. But, i have one issue with my logitech pro 9000 webcam and skype which I am unable to solve on my own. the webcam works fine when I test in the settings of skype. Also every blue moon it works fine during a video call as well. But most of the time, when I start a video call, it gets stuck, the circular led light on it is on (showing that it is recording video), its microphone turns off and skype gets stuck also. I have a completely updated system, latest skype.
View 1 Replies
View Related
Jan 14, 2011
Can I run this camera: Quote: Bus 001 Device 007: ID 046d:0809 Logitech, Inc as something other than a UVC driven camera? It appears that UVC in 640x480 format is only available at 15 fps. I need to record at fps=30. So I can splice into existing video.
[Code]...
echo "Recording. Ctrl-C or close window to stop" Is there a driver other than 'v4l2' I can use that will give me 30 frames per second?
View 1 Replies
View Related
Oct 20, 2010
I'm using Goddard and AMD 64;
1) Just playing with PHP and needed to do some debugging.
2) Installed Xdebug from RPO
3)PHP.INI edited
4) Phpinfo() reports xdebug running.
I try
[code]...
I thought about selinux and mapped 9000 [URL]...
View 2 Replies
View Related
Mar 16, 2011
I have a Blackberry Bold 9000 that I would like to be able to sync with Kmail. Once I do this, I can be rid of the last bit of Windows I own (Windows Vista) on my laptop. Also, will I still be able to perform Blackberry software updates as required from my Linux sync? Once I have this solved I can get rid of Windows, and put OpenSuse on my laptop too.
View 2 Replies
View Related
