Ubuntu :: Radeon 9000 Pro - Unable To Use 1440x900 Resolution
May 15, 2010
After having problems with an onboard graphics chipset I've just installed an ATI Radeon 128Mb 9000 Pro AGP graphics card into my old computer... The problem is that I can't get it to use 1440x900 resolution that my LG L194WT (Ubuntu won't detect it) requires and the highest I can select is 1360x768 and that looks all wrong
lspci gives:
Code:
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV250 If [Radeon 9000] (rev 01)
01:00.1 Display controller: ATI Technologies Inc Radeon RV250 [Radeon 9000] (Secondary) (rev 01)
And /var/log/Xorg.0.log gives:
Code:
X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
[code]....
View 1 Replies
ADVERTISEMENT
Jul 16, 2011
I have installed Ubuntu 11.04 on my Dell Latitude D610 (with ATI X300 graphics card) and am trying to set the default resolution to 1440x900 for my Samsung Syncmaster 931 monitor. I have installed "fglrx" and when I run "xrandr -q" I get the following information.
Code:
Screen 0: minimum 320 x 200, current 1024 x 768, maximum 1440 x 1440
VGA-0 connected 1024x768+0+0 (normal left inverted right x axis y axis) 410mm x 257mm
1440x900 59.9 + 75.0
1280x1024 75.0 60.0
[Code]....
Other posts say I need to edit "etc/x11/xorg.conf" but this file does not appear to exist.
View 8 Replies
View Related
Jul 22, 2010
I'm having trouble getting this to work, everytime i pop it into the motherboard and start my computer it beeps at me and won't start, i'm thinking it probably just won't work but does anyone have any ideas that MIGHT make it work? i've downloaded the driver package off the ATI website and it doesnt seem to install anything. maybe possibly just hardware conflict??
View 7 Replies
View Related
Jan 23, 2011
I have been just pretty much having fun with Ubuntu and a couple other distros for a couple years and have not yet ran into a problem like this. I'm pretty good in a command line environment although I end up googling syntax a lot b/c of that wonderful memory I have! Anyways..
I am running an older machine: P4P800 ASUS Mobo, P4 2 Ghz, 3G RAM and an ATI Radeon 9000.OS: Ubuntu 10.10 Maverick Meerkat Issues: Seems that anything that Compiz has to render the brightness is really low. CairoDock (w/ OpenGL) does not render like it does on other machines that I have, looks like garbage. I've come to the conclusion that I need to get a better video driver (Hope I'm correct here otherwise I've been going the wrong direction for awhile now).
Things I've tried through research around the net: I've attempted installing fglrx(command line style) from several tutorials I've found here and there. Most of them for older versions of Ubuntu and if I'm remembering right there have been a few significant changes lately, which may be causing my issues? Of course I've tried the easy ways: Installed all fglrx/ati/radeon related packages in Synaptics Package Manager
Checked System > Admin. > Additional Drivers before and after package installations
Ati Website - the drivers that they have are for XFree86. I don't think they can run on XOrg - it's a completely different setup? Again, I don't have a great understanding on how the back end of all this works, so bear with em.
I ran: echo options radeon modeset=0 > /etc/modprobe.d/radeon-kms.conf To disable KMS.
Rebooted - Video was much worse I then ran: echo options radeon modeset=1 > /etc/modprobe.d/radeon-kms.conf To re-enable KMS Rebooted again. Everything ran fine but I didn't have my Cairo Dock > which I can deal with, that's not why I'm posting.. Well, that's a good chunk of it - there's more but I don't remember most of it as I've been working at this on and off for weeks. Again, a lot of this was tried upon researching anything and everything I could find on the net - so some of it might sound ridiculous, I was just trying anything that would work!!
View 2 Replies
View Related
Jun 26, 2010
so I've finally told myself i'd be better off with ubuntu instead of windows. And now I'm seeing I've made the wrong decision. I've spent 4 hours searching the web about how to get the 1440x900, tried some of the solutions and nothing worked. The resolution doesnt show up in the nvidia control panel. I tried somehow editing xorg.conf which just messed everything up so i had to put it in the default state..
View 2 Replies
View Related
Mar 14, 2010
I have an ATI All-In-Wonder 9000 AGP4x video card with TV tuner function. I following the description on [URL] where I found a how-to for enabling TV tuner. The tuner works in xawtv and avview but without sound. I plugged the cable in from tuner to my sound card and try to increase volume and/or enable mute on/off but nothing to hear. The sound card line-in input works correctly, because when I attaching my MP3 player I hear sound over the sound card. I think maybe have a register accessing/writing error which handle the TV Tuner sound chips to turn on/off. (the tuner works correctly in Windows XP). I'm using Ubuntu 8.04.4 LTS with x86_64 (amd64) actually. The lspci output for Video Card:
[Code]....
View 1 Replies
View Related
May 30, 2010
I run RHEL5 on Dell GX280 with "Intel Corporation 82915G/GV/910GL Integrated Graphics Controller (rev 04)" and i810 driver. But I cannot obtain 1440x900 resolution. Here's my xorg.conf:
Section "ServerLayout"
Identifier "single head configuration"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
[Code]....
View 9 Replies
View Related
Feb 8, 2010
I've been loitering over my resolution and nvidia xserver settings for about 2 days now, fiddling with xorg.conf and breaking ubuntu in the process trying to get my resolution at it's native settings. I've searched through many forums and none of them have solved my problem. Its maximum resolution is 1360x768, which isn't enough. It should be 1440x900. I have tried adding custom modes to the xorg.conf file and it wouldn't work. I don't know what's going on. Also here is my xorg.conf since I saved the nvidia settings to it...
[Code].....
View 9 Replies
View Related
Jan 20, 2010
I have an ATI Radeon 9000 Graphics card that Ubuntu 9.10 doesn't seem to recognize no matter what I do. Knowing that its an older card and that ATI stopped support for it a while ago, I was wondering if anyone knows if I would have better luck on Ubuntu 8.04. I can't get 3d or opengl to work, or install the correct ATI Driver.
View 2 Replies
View Related
Apr 29, 2010
After update from 8.10 to 9.10 I have screen resolution 1440x900, which is not supported by my monitor. Following changes had no effect on my screen resolution
xrandr:
Code:
$XAUTORITY=/home/zuker/.Xauthority DISPLAY=:0.0 xrandr --output default --mode 1024x768
XIO: fatal IO error 11 (Resource temporarily unavailable) on X server ":0.0"
xorg.conf
Code:
Section "Screen" ...
Subsection "Display"
Depth 24
Modes "1024x768"
Virtual "1024 768"
EndSubSection
View 9 Replies
View Related
Jun 30, 2010
My monitor's dvi jack is damaged so my nvidia geforce 210 does not recognise the supported resolutions correctly.
result: while it actually can support upto 1440x900, the highest available resolution is 1360x768.
While on windows, i used the nvidia utility to add the custom resolution and everything was nice.
On ubuntu 10.04, i haven't found a way to do that yet. yes, i searched forums, tried a couple of things with the xorg.conf file and lxrandr, etc. but to no avail.
I did manage to get the resolution listed in ubuntu's own display manager, and it shows 1440x900, but it doesn't apply when i hit 'apply'.
The nvidia settings manager does not show the resolution.
View 2 Replies
View Related
Apr 25, 2011
it will NEVER let me change the screen resolution to 1440x900. It never gives me the option. I then spend hours looking for fixes, making Xconf files and editing them to no avail. The same is true for Fedora 15 (Beta). what can i do to get the 1440x900 option in my "Display" list in Fedora.
View 2 Replies
View Related
Feb 12, 2011
I'm trying to use GRUB2 in graphical mode with 1440x900 resolution, but the result is always garbled nonsense: the highest resolution I can get is 1280x800.
Word is from googling that long as vbeinfo lists a resolution, GRUB2 can use it. This doesn't seem to be true: vbeinfo says that 1440x900 is available but it doesn't work.
Testing it from the GRUB2 command line:
set gxfmode=1440x900
terminal_output gfxterm
# -> garbled nonsense
# back to trusty 640x480
terminal_output console
[Code]....
View 1 Replies
View Related
Dec 20, 2010
I installed Ubuntu 10.10 along side windows 7, It works flawlessly accept for one issue: no widescreen resolution (1440x900).I have some CIBOX screen and XFX HD 6850.
View 3 Replies
View Related
Oct 31, 2009
New install of 5.4 and I have a dell S1909W display that runs 1440x900. I don't run a windowed environment and only use CLI. I am only getting 25 lines per screen with huge text and I need to set the resolution so I can actually work :) I tried adding vga=866 to my /boot/grub/menu.lst file at the end of the kernel line but nothing changes after reboot.
View 2 Replies
View Related
Aug 22, 2011
After installing Debian for the first time earlier today, I tried to setup my display for a 1440x900 resolution. However, the "Monitor Preferences" setting won't allow me to set a resolution higher than 1280x1024.
View 3 Replies
View Related
Mar 20, 2011
i got a dell computer running ubuntu. it is equipped with an ATI radeon 5450, using a dell IN2010 1600x900 screen. when i installed ubuntu, the resolution was just fine. then i installed the ATI driver, and from that moment on, i have that strange behaviour: when i start ubuntu, the resolution seems set to 1440x900, but stretched to wide-screen mode, so the font is somehow blurry. when i turn the monitor off and then on again, everything is just fine.i have catalyst control center installed, and the resolution is set to 1600x900, but i still have the problem that i described.
View 7 Replies
View Related
Aug 25, 2010
I have on old Thinkpad T42 with the Mobility Radeon 7500 graphics chip. It used to work like a charm with the open source radeon driver, until KMS came along. It had no problems except for fullscreen being always black. I thought this is because I have an old card, and used 'nomodeset' in the kernel line, which strangely cranked up the memory usage and made the system choppier, but I managed. Today I was testing the use of an external monitor at home, and found out not only that it only works properly with KMS enabled, but fullscreen games work like a charm (e.g. DOSBox, which I use a lot).
After experimenting a bit, I found out that on the internal display (LCD), 640x480 produces a black screen, while others work as expected. so i set dosbox to use 800x600 as the fullscreen resolution, and it works. The problem is that there are a lot of games (and apps) that I use which provide no configuration options to set the resolution, so I end up with a black screen (when I'm using the internal display, of course). Bottom line: I'm not asking for anyone to fix my problems from a distance, basically blindfolded.
View 7 Replies
View Related
Dec 28, 2010
I have an ATI Radeaon X800 GTO graphics card which is working fine in XP and I am running at a resolution of 1280 x 1024 @ 75 hertz and I am dual booting with Open Suse 11.3 and the highest resolution I can get is 1024 x 768 which makes the icons massive. Is there a simple way to install the correct drivers in 11, 3
View 9 Replies
View Related
Mar 25, 2010
I have a machine with an ATI Radeon 7000/VE graphic card and I can not get the screen resolution I need. This is running on redhat enterprise 4 OS (32bit). My monitor is a 1600x1280 but I can not get anything better than 1024x768. I did set the desired resolution in the xorg file. I guess this would rather be a driver issue? I am running with radeon driver at the moment. I tried to get the fglrx from ATI but they do not seem to give any linux support for this card.
View 4 Replies
View Related
Apr 19, 2011
I have a LMDE (Mint Linux Edition based on testing, now Wheezy) i386 that I just did a dist-upgrade on and now it isn't properly detecting my monitor resolution. I have two 1680x1050 monitors, one attached to the DVI and another to a VGA video switch. When I rebooted to the new 2.6.38-2-686 kernel both monitors were giving me 1024x768. I futzed around for a while and could then get the the DVI monitor to correctly identify the proper resolution, but the VGA monitor resolutely refused to see more than 1024x768.
I was able to get the proper resolution by entering these commands:
[Code]...
Should I file a bug report, and if so, with whom? I have to say, the Debian bug report process is not too newbie (or even not-so-newbie) friendly, but I'd like to help if it doesn't require me to hand-configure a MUA.
Also, I suppose I shouldn't mention it in a single post, but my mouse is behaving rather unpredictably now (click speed, selecting), and trying to reboot dismounts the file system and then starts up again giving me my display manager (in my case KDM), without restarting the system (both from "sudo reboot" and trying to restart with KDM or the Gnome widget). If I really want to restart the system I have to halt it first and hit the power button.
View 4 Replies
View Related
Feb 17, 2010
I have a new system with an ati mobility radeon hd 5730 chip. As far as I know, there are new drivers in the works, but aside from some articles, I haven't found anything that specifically tells me how to get them installed/working (at least, so that it works for the 5000 series of radeon chips).Has anyone had any luck with this yet? I'm just at the stage of installing, so I don't really care if it involves a different distro, etc. I've tried Ubuntu 9.10 and 10.04-alpha2, as well as Fedora 12 (from the live CD) and so far no luck.At the moment, all I care about is getting the native 1600x800 working for my screen. I haven't a clue how do do that...it seems like I might be able to do this using xrandr, but I don't know how to create a mode properly.
View 6 Replies
View Related
Aug 23, 2010
I have a problem with free ATI driver with Radeon X850XT 256Mb VRAM. I cant get 3d acceleration in OpenSUSE 11.3.
System : Linux lv426 2.6.34-12-desktop #1 SMP PREEMPT 2010-06-29 02:39:08 +0200 x86_64 x86_64 x86_64 GNU/Linux
Here boot.msg :
<6>[ 5.847172] [drm] Loading R400 Microcode
<6>[ 5.854547] [drm] radeon: ring at 0x00000000B0000000
<3>[ 6.032976] [drm:r100_ring_test] *ERROR* radeon: ring test failed (sracth(0x15E4)=0xCAFEDEAD)
<3>[ 6.035637] [drm:r100_cp_init] *ERROR* radeon: cp isn't working (-22).
[code]...
View 4 Replies
View Related
Mar 13, 2010
I just upgraded to an ASUS MS227 on a Ubuntu 9.10 box with a "NV34 [GeForce FX 5200] (rev a1)" video card. Here's the problem, the only two resolutions it will work in is either 1900x1200 OR 1440x900. Anything in between shoves the display about 5 inches to the left, so far over that it's not correctable by the monitors own horizontal control.
This is my xorg.conf:
Code:
Section "Screen"
Identifier "Default Screen"
Device "Configured Video Device"
Monitor "Configured Monitor"
SubSection "Display"
Depth 16
[Code]...
View 2 Replies
View Related
Aug 8, 2010
Where can I set the 1440x900 wide screen text console on my laptop?
View 1 Replies
View Related
Apr 4, 2010
I replaced an ATI Radeon 9550 with a Radeon X1300/X1550, in hopes of better performance.
My System: P4@3GHz, 1.5Gb RAM, Fedora 12, kernel 2.6.32.10-90.fc12.
Faults: Screen refresh is extremely low. Glxgears outputs 25 FPS. Dragging windows around is sometimes really slow.
What I did so far, in hope of fixing it:
1. Installed 'system-config-display', for providing an xorg.conf
2. Did: yum --enablerepo=rawhide update mesa-dri-drivers-experimental mesa*, fixing this, but to no avail...
I cannot find any errors in the log...I don't know what to do...
I am posting my Xorg.conf, Xorg.0.log and Glxinfo through links to pastebin.com
POST UPDATE:
When running GlxGears, I get a bit of motion, and then the gears freeze for 1 second. And this goes on and on. But...if I move the mouse around, I get 1100FPS!
Now I messed a bit with xorg.conf and the "SWCursor" Option, but the above happens when this option is on "true". On "false" there is no 1100FPS, only the freezing loop...
View 1 Replies
View Related
May 24, 2009
I been searching for months on how to get the s-video to work on my pci VGA compatible controller: ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500] card. I found a site with instructions.
This is how I got it to work.
I install Debian 5.0 Lenny Desktop
added the Driver "radeon" to my /etc/X11/xorg.conf file
This work and I was able to use my tv as a monitor however when I try to play a video file from totem or vlc all I could get was audio with no video; These files work and played fine in the CRT monitor.
View 2 Replies
View Related
May 28, 2011
So i just installed Ubuntu on my computer,the first thing i noticed was that my resolution was 800x600. i had used 1280x768 on windows. but when i tried to change the resolution i can't change it. its only limited to 640x480, so how do i change it to 1280x768?
View 9 Replies
View Related
May 6, 2010
I've tried various searches and haven't found anything quite matching this. Please forgive me if I am repeating though. I upgraded my Dell D600 (ATI Mobility Radeon 9000) from Karmic to Lucid. On Karmic, all 3D effects (Expo, Rotating Cube, etc.) worked fine. On Lucid, all still work but, once once enabled, the 3D effect is very dim - almost as if the backlight on the effect itself is turned off (i.e., when rotating the cube, the cube is dark but the background Skydome is illuminated). Once the effect is over, normal illumination returns. Running Karmic from the live disk and the effects are fine again. A buddy upgraded his D610 (next ATI in the line) and does not have the same issue.
View 3 Replies
View Related
Jun 17, 2010
I am getting a Logitech Webcam Pro 9000. How do I install it on Ubuntu 10.04 LTS?
View 5 Replies
View Related
