Ubuntu Installation :: 11.04 Does Not Work Well With Sandisk USB Stick With U3 Launchpad
Apr 29, 2011
If you have problem using Ubuntu 11.04 from USB, remove the U3 launchpad if you do not need it at all. It may solve your problem.Link: [URL] I am not a Ubuntu/Linux user but I do keep a copy of Ubuntu LiveUSB in my Sandisk cruzer micro 8GB USB stick in case of system failure. It comes with the U3 lanuchpad that I never use.The USB stick was working happily with Ubuntu 10.04 and 10.10. However when I formatted the stick and put Ubuntu 11.04 (checksum is ok) into it, it failed to boot from the stick every single time. I was getting this error even though I have disabled all(one) my physical DVD-RWs in BIOS:
Code:
mounting /dev/sr0 on /cdrom. failed Device or resource busy.
I do not remember the wording...)The error message appeared when I saw the Ubuntu logo and the five animating dots. So I decided to remove U3 launchpad and voil�! I could boot for the first time (and 6th time in a row without problem now).sidenote: My physical DVD-RW drive is still blocking the bootup half of the times even if there is no discs in it. Disabling the drive in BIOS solve the problem. The error occurs before I see the five animating dots. The screen stops at
Code:
[figure varying each time] scsi 0:0:0:0: CD-ROM PIONEER DVD-RW DVR-111 1.29 PQ:0 ANSI:5
View 9 Replies
ADVERTISEMENT
May 13, 2010
I am trying to update I get this errorFailed to fetch [URL]404 Not FoundSome index files failed to download, they have been ignored, or old ones used instead.
View 8 Replies
View Related
Jan 14, 2011
I just installed Squeeze_di_rc1, whit gnome, when i insert any usb stick i recive how can i solve it?At the same times i tried to format in fat 16 with gparted but the result is the same.
View 6 Replies
View Related
Jan 25, 2010
I have a Sandisk mp3 player. I got it because A - I like Sandisk and B - I know they have better out of box support for Linux than most other manufacturers. It is an 8gb mp3 player with an 8gb micro SD card, so each pieces of media mount independently under - SANDISK - 8gb Media.
Sandisk sits in my desk for a few months, unused, since then I upgrade systems to 9.10, blah blah... not it won't mount. Sure, it'll charge it and all. But the actual device won't mount. I did not check fdisk -l, however, I did check gparted and I never saw the thing get recognized.
View 4 Replies
View Related
Feb 1, 2011
I tried to plug it intoour pc and upload some songs to it in Ubuntu, but Ubuntu does not recognizeit.I imagine, as usual, this is adriver issue. Are there any genericdrivers that work across the board?
View 2 Replies
View Related
Apr 14, 2011
Ubuntu 10.04 won't recognise my Sandisk Sansa Clip+ as installed on comp. It sees memory sticks and memory cards. Are there drivers that I need to install?? Anything in Synaptic Package Manager that needs to be installed?
View 4 Replies
View Related
Dec 20, 2010
It's just about to make a USB stick boot my ubuntu 10.10. First,I have tried several flash drives. I have downloaded and checkedsum several images, including Mint 10 ( sort of Ubuntu ), I have used UNiversal USB, LinuxLiveUSB creator,Unetbootin and the native program inside Ubuntu. All the time I have the same problem : "line 7: can't open /dev/sr0 no medium found" I have disabled by default the floppy disc from BIOS. I suspect that some line has to be modified. I am not an advanced user of Linux. But I would like to have ubuntu booting from a stick flash drive.
View 7 Replies
View Related
May 16, 2011
I've got the following problem: I just noticed that there were just very few notifications about updating the system (usually there are damn many of them in a week) So I opened the update manager and clicked on "refresh list". The following result popped up: p,li{white-space:pre-wrap;}E: Error http://ppa.launchpad.net natty/main/Sources Sources 404 Not Found First I thought, it would be just some kind of server problem, but it didn't stop. The next thing was to research the thread and I even found something. However, the solution suggested didn't work at all. (Things, which might have caused this: I installed the default software center |I'm using Kubuntu, but in this case that fact doesn't matter| and used it. To sum up:
- not able to update the system referring to the launchpad main sources for 11.04
- following error: E: Error http://ppa.launchpad.net natty/main/Sources Sources 404 Not Found It would be great if this was a common issue and I've been simply too stupid to find a proper solution. So you could just post the link.
View 2 Replies
View Related
Jan 7, 2010
the U3 system mounts on dev/sr1 while the rest oi the 8 GB USB drive is usually /dev/sdb or sometimes /dev/sdc.
fdisk will not write to this /dev/sr1 partition
Code:
[root@localhost ~]# fdisk /dev/sr1
You will not be able to write the partition table.
Note: sector size is 2048 (not 512)
[code].....
View 11 Replies
View Related
Mar 3, 2010
I have an IBM T43; only one HD allowed. It is loaded with Xp on the one HD, and others have and do use it regularly.I have loaded Lenny on Kingston USB flash on this machine without problem (sdb1 root and bootable.) I refuse to allow GRUB to be installed on the HD, tell it to load on /dev/sdb1, it completes and reboots. I then edit GRUB (HD0, 1) to (HD0, 0.) It then boots in fine. Later I edit the Boot entry.
When I attempt to do this with a Toshiba 8Gb Transmemory USB or a SanDisk 8Gb unit it simply restarts and displays a �"Error Loading Operating System" messageI�ve noted on the SanDisk the U3 business and have removed it via the provided tool; it still does not load.In G Parted I�ve noted on the Toshiba a hiddenfile at the beginning of the formatted partition. but can do nothing to remove it.It takes up quite a bit of territory. And, it too will not load.
View 1 Replies
View Related
Jun 25, 2011
For some reason my Sandisk Cruzer Blade 8GB is not being recognised in Mint 11.It did work for a short period but no longer does so.Is there some command line I can use to search for it ?it simple as I am in the Newby category as far as Linux is concerned.
View 9 Replies
View Related
Nov 5, 2009
I have a IEI IBX 530 unit that uses a flash disk for storage. I used a Transcend 32GB flash disk and installed CentOS 5 successfully on the unit. I now wanted to install a second unit, but am using a SanDisk Extreme IV flash disk. The installation completes successfully, but when the system reboots for the first time after the install is complete, I get an error: "Grub Loading Stage 2. Read Error". This error occurs using CentOS 5.3 and even occurred when trying Fedora 9 and 11.
why this is occuring ot how I can resolve it? I used both the 16GB and 8GB Sandisk version, and created partitions as follows:
/boot (100MB)
swap (1GB)
/ (remainder of disk available)
View 1 Replies
View Related
Mar 25, 2010
I have a Mobidtv Trio v-gear which has the same specs as a MSI or geniatech usb stick inux-xf9w:/home/hase/RPM/dvb-apps # dmesg|tail results in :
[ 4570.766014] tuner-simple 0-0061: creating new instance
[ 4570.766034] tuner-simple 0-0061: type set to 37 (LG PAL (newer TAPC series))
[ 4570.767247] em28xx #0: Config register raw data: 0xd0
[code]....
Neither with kaffeine, Me tv or tvtime can I search for channels? I run 11.2 Asus laptop Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz
View 1 Replies
View Related
Apr 20, 2011
I'm using a usb stick to test ubuntu. Is it normal that apt-get install doesn't work? I have a internet connection.
View 10 Replies
View Related
Apr 21, 2011
I've been trying to figure out how to run/install openSUSE from a usb stick for several days. I downloaded the 11.4 .iso from distrowatch & used the following command in Linux Mint to put it on the usb stick.
Code:
sudo dd if=openSUSE-11.4-KDE-LiveCD-x86_64.iso of=/dev/sdc
It gets to the loading screen and get stuck. It has a small bar going across, that never finishes. I've hit escape to try and get some info, but don't know what I'm looking for and it's too much to write down. I did notice there were several I/O errors. I did check the usb for defects and it returned ok, and the md5sum was correct.
I've also tried safe settings which takes me to a blueish/black screen and stays there. No ACPI starts to load and then drops to a shell.
how to get this accomplished? I've installed many Linux OS's and I've never had this much trouble.
ps. I"ve read the "please read" pre installation page on here, and things just don't make a whole lot of sense to me.
View 2 Replies
View Related
Feb 26, 2010
I added a repo from launchpad to install latest Network Manager and then installed it (version 0.8). Then I decided to rollback to Karmic's version (since 0.8 doesn't work) but failed: I removed the repo from sources.list
Then apt-get udpate
Then apt-get clean
Then apt-get install network-manager...
But still 0.8 version is downloaded and installed! How can I restore Karmic's version?
View 8 Replies
View Related
Nov 30, 2010
Anyone else having problems connecting to Launchpad?
View 4 Replies
View Related
Oct 1, 2010
i was writing a .img file to my usb stick with ImageWriter, but it didn't seem to do anything so i clicked the close gtk button and pulled the stick out of my pc. now my pc gives my an when i try to open the stick. is there any way to fix this. I can use win xp pro, win xp media center, win 7 starter, ubuntu 9.10 and ubuntu 10.04
View 5 Replies
View Related
Dec 1, 2010
I am trying to add a OpenPGP key for launchpad. It said to use this command.
Code:
gpg --fingerprint
When I use that command nothing shows.
Next I clicked on the the How to get the fingerprint. It said to go into Passwords and Encryption Keys. Then the My Personal Keys tab. I have nothing there. What should I do to get something there?
View 6 Replies
View Related
Jan 5, 2011
Is there a way to report a bug on a launchpad ppa? I see the Bugs section only has search, with no open bugs. Is there another way to report a bug on this system?
View 1 Replies
View Related
Sep 1, 2011
Is this seriously the ONLY way to report a bug? I can't just fill out a form somewhere without running software to do it? When I try to do it the way explained in the guide, it tells me that I'm using a stable version of Xubuntu, and that only people running dev versions (like 11.10) can report bugs.This seems absurd. Are they saying that all stable releases are perfect in every way? Surely one must be able to report a bug for them...
View 4 Replies
View Related
Sep 1, 2011
I'm about to ditch Freenas as my NAS software and make it an Ubuntu server box. The mainboard is an Asus AT3ION-T dual core Atom board. Freenas runs happily from USB stick. I have no optical device to install Ubuntu from and would like to install Ubuntu Server to a USB stick.
View 8 Replies
View Related
May 18, 2010
I'm trying to implement a patch to notify-osd and I don't know how. Is there any straight forward way of doing this? [URL]
View 4 Replies
View Related
Apr 21, 2011
I have a problem with installing ubuntu 11.04 I get this message:
Code:
Hspell: can't open /usr/share/hspell/Hebrew.wgz.sizes
It's get stuck with the updating time from internet servers process but I can't find a way to report it to launchpad.
View 2 Replies
View Related
May 30, 2011
I've already encountered a couple bugs, and thought it would be nice to be able to report new ones there and/or comment on old ones. But their register button only leads to "Invalid OpenID transaction," and I think that's a bug, and I think I ought to report that over here since I obviously can't register or report it over there.
View 1 Replies
View Related
Jun 4, 2011
I finally figured out how to upload onto Launchpad into a PPA, but unfortunately, I cannot seem to get the version numbers worked out.
For instance, here is the original version of bleachbit-bonus:
bleachbit-bonus_0.8.2-1_all.deb
And I can successfully break it down into the correct source binaries for Launchpad, but when I try a folder name such as this:
bleachbit-bonus-0.8.2-1~ppa1
It uploads to the PPA just fine, but the versioning is bad. For some reason it breaks it down like this:
package name: bleachbit-bonus-0.8.2
version: 1~ppa1
Also, I really don't care what the version name is, I just want it working so I can mimic for several packages.
View 4 Replies
View Related
Aug 17, 2010
Should this mobile broadband stick work? It's not showing in Network Manager.
[Code]....
View 6 Replies
View Related
May 15, 2010
Is anyone else having trouble...I'm getting a ton of "Failed to fetch..." errors while updating.The site itself is working fine. No news here [URL]. Normally I wouldn't be concerned, however this happened right when I modified my sources so I'm hoping I didn't mess something up.
View 1 Replies
View Related
Aug 20, 2010
I always hear 'do NOT install anything from anywhere except the official repositories'. But I find a lot of great apps that are not included in repositories and would like to ask. How actually secure launchpad is? Are the codes reviewed by anyone? How do I make sure that a piece of software is not going to harm my Ubuntu? If I add a PPA for some program I won't going to check it's code every time it updates or am I being too cautious?
View 9 Replies
View Related
Jul 28, 2011
I cannot find where to post bugs in the launchpad anymore? What happened to the launchpad? It's sort of goofy that there is no (report a bug) link anywhere. But if you search bugs then you can see a link to the right, but nothing anywhere else. And even then you can only post a bug regarding that same category and subject. So it would appear the launchpad has a bug, or I just can't figure out how to navigate to report a bug.
View 9 Replies
View Related