CentOS 5 Hardware :: Installing 5.3 Using Sandisk Flash Disk?
Nov 5, 2009
I have a IEI IBX 530 unit that uses a flash disk for storage. I used a Transcend 32GB flash disk and installed CentOS 5 successfully on the unit. I now wanted to install a second unit, but am using a SanDisk Extreme IV flash disk. The installation completes successfully, but when the system reboots for the first time after the install is complete, I get an error: "Grub Loading Stage 2. Read Error". This error occurs using CentOS 5.3 and even occurred when trying Fedora 9 and 11.
why this is occuring ot how I can resolve it? I used both the 16GB and 8GB Sandisk version, and created partitions as follows:
/boot (100MB)
swap (1GB)
/ (remainder of disk available)
I am having new hardware and IDE driver for that hardware as drive disk image (it8213_centos53.img). CentOS 5.3 installation is working fine with drive disk image at USB and CentOS 5.3 at DVD. Our application uses CentOS 5.3 and we build a custom kick-start ISO for installations. Using that ISO client is going to install on all hardware boxes.
Note while installing : a) No network connection is avalible. b) No USB isavalible. c) No floppy is avalible. d) Only single CD-ROM is avalible.
So, is it possible to build single custom kick-start CentOS 5.3 ISO which contains dirve disk image and entire installation will be done using that image. If so please let me know the steps to build it.
I would like to use a USB flash drive as a boot disk. I have 2 hard drives. I will have Windows 7 as Drive 1 and Linux as Drive 2.I would like to not touch Drive 1 at all NO grub or other boot-loader. My old system I used a floppy drive as a boot disk.This worked if floppy was inserted: It booted grub giving me the choice of Windows(drive 1)or Linux(drive 2). I would like to replace the floppy with a USB stick. I have a couple of 64 MB (LOL) flash drives to use.
I'm a subscriber of a Linux magazine who sends me 2 dvds of Linux distros each month. I wanna try some of those just for some time pass. The issue is that out of 52 GB partition on which Fedora 11 is installed, 42 GB is free. I want to have around 10 GB space from that 42 GB so that I can install CentOS 5.3. how shall I partition my disk?
Our server is a CybertronPC I2XV9080 Imperium Tower. It is equipped with a supermicro X7DVL-I Motherboard and Quad 750 GB SATA2 RAID edition hard drives in a raid 5 array. We tried to install Centos on the Raid5 array with Device-Mapper as the LVM. In the BIOS SATA Raid was enabled and the ICH RAID code base option was set to [Intel].
Intel Matrix Storage Manager Option ROM V5.6.4.1002 ESB2 RAID ID Name Level Strip Size Status Bootable 0 Raid5 Raid 5 64KB 80GB Normal Yes 1 Raid_5 Raid 5 64kB 2000GB Normal Yes[code].....
Can I have multiple level raids across the same array or would that lead to problems as above? Is the root cause of my problem the fact that intel raid5 is not supported for Linux as based on the following link http:[url]....
I have xp/fc8 on an older ide drive and just installed a new sata 1T and planned to put fc10 on it but in the process I killed my fc8 installation. I told the installer that the other disks were off limits but it was somewhat confusing at the bootloader page. So, I suspect that I told it boot off the fc8 disk. If that is the case is there a way to restore the fc8 install by somehow rescuing the /boot partition on the fc8 disk?
I have a Sandisk mp3 player. I got it because A - I like Sandisk and B - I know they have better out of box support for Linux than most other manufacturers. It is an 8gb mp3 player with an 8gb micro SD card, so each pieces of media mount independently under - SANDISK - 8gb Media.
Sandisk sits in my desk for a few months, unused, since then I upgrade systems to 9.10, blah blah... not it won't mount. Sure, it'll charge it and all. But the actual device won't mount. I did not check fdisk -l, however, I did check gparted and I never saw the thing get recognized.
I tried to plug it intoour pc and upload some songs to it in Ubuntu, but Ubuntu does not recognizeit.I imagine, as usual, this is adriver issue. Are there any genericdrivers that work across the board?
I have an IBM T43; only one HD allowed. It is loaded with Xp on the one HD, and others have and do use it regularly.I have loaded Lenny on Kingston USB flash on this machine without problem (sdb1 root and bootable.) I refuse to allow GRUB to be installed on the HD, tell it to load on /dev/sdb1, it completes and reboots. I then edit GRUB (HD0, 1) to (HD0, 0.) It then boots in fine. Later I edit the Boot entry.
When I attempt to do this with a Toshiba 8Gb Transmemory USB or a SanDisk 8Gb unit it simply restarts and displays a �"Error Loading Operating System" messageI�ve noted on the SanDisk the U3 business and have removed it via the provided tool; it still does not load.In G Parted I�ve noted on the Toshiba a hiddenfile at the beginning of the formatted partition. but can do nothing to remove it.It takes up quite a bit of territory. And, it too will not load.
For some reason my Sandisk Cruzer Blade 8GB is not being recognised in Mint 11.It did work for a short period but no longer does so.Is there some command line I can use to search for it ?it simple as I am in the Newby category as far as Linux is concerned.
Ubuntu 10.04 won't recognise my Sandisk Sansa Clip+ as installed on comp. It sees memory sticks and memory cards. Are there drivers that I need to install?? Anything in Synaptic Package Manager that needs to be installed?
If you have problem using Ubuntu 11.04 from USB, remove the U3 launchpad if you do not need it at all. It may solve your problem.Link: [URL] I am not a Ubuntu/Linux user but I do keep a copy of Ubuntu LiveUSB in my Sandisk cruzer micro 8GB USB stick in case of system failure. It comes with the U3 lanuchpad that I never use.The USB stick was working happily with Ubuntu 10.04 and 10.10. However when I formatted the stick and put Ubuntu 11.04 (checksum is ok) into it, it failed to boot from the stick every single time. I was getting this error even though I have disabled all(one) my physical DVD-RWs in BIOS:
Code:
mounting /dev/sr0 on /cdrom. failed Device or resource busy.
I do not remember the wording...)The error message appeared when I saw the Ubuntu logo and the five animating dots. So I decided to remove U3 launchpad and voil�! I could boot for the first time (and 6th time in a row without problem now).sidenote: My physical DVD-RW drive is still blocking the bootup half of the times even if there is no discs in it. Disabling the drive in BIOS solve the problem. The error occurs before I see the five animating dots. The screen stops at
There is a disk 500 gb, it is broken on /boot and on /root and on /dev/sda1 and /dev/sda2. Whether prompt it is possible to redistribute a disk without loss of data namely it is necessary to make/boot and two equivalent on disk volume.
after installing Ubuntu on one WD 500 GB hard disk and after making mistake and pasting wrong code into Terminal:my OTHER WD 500 GB hard disk that was also in the system (I guess it was "hd1") - died.The problem must be, I guess, I typed wrong code: "hd1,1" instead of "hd0,0".)500 GB (NTFS) of data was on that other (non-Ubuntu) hard disk, and now I can not access it anymore. While booting, system gives "Hard Disk Error" warning and stops.One again: I installed Ubuntu od one hard disk and at the end of instalation I pasted wrong code for GRUB, giving address of another hard disk. Now that other hard disk has error and will not work
I just installed firefox and flash-plugin.The version of firefox is 3.0.10, package is firefox-3.0.10-1.el5.centos.The version of flash-plugin is 10.0.22.87, package is flash-plugin-10.0.22.87-1.el5.rf.But firefox crashes when there is flash in web page, unless disable flash plugin in firefox.
I have been trying everything to install flash player on Ubuntu 11.04, I've done everything and it wont work. Tried Downloading it from adobe, that ..... redirects me to, tried the source in the software centre, tried installing it through the terminal.
It either won't add the source or asks me for my install disk, when that is in the drive it keeps asking like it isn't (but it is mounted ect)Any one know a terminal command or way to fix this.
For various reasons, when I installed our server, I configured it so that it would boot off a USB flash disk. The flash disk mounts as /boot and / mounts on our RAID array.
It all works very well, but I would like to have backup so that if/when the flash disk goes, I can pop in another one.
I have tried to make copies of the flash disk (using both cp and dd), but it doesn't work. When the server starts its bootup sequence, instead of Linux loading, a cursor starts blinking endlessly.
If I put the original flash in, it works fine. If I put the copy in, it doesn't work.
I can't see any difference between the copy and the original. They seem to have the same content. If I do blkid both have the same label and UUID. The label is /boot, and /etc/fstab refers to this
how to get a working bootable USB boot disk for DOS using Fedora 12. I needed the dos boot disk to flash my motherboard BIOS as it did not support linux for updating the bios. Thought I'd put the steps involved to help other people who wanted to do something similar. The steps outlined here are for a Fedora 12 system. You should be able to extrapolate the minor changes that may be required for other linux distributions. All commands listed below to be typed in on a command prompt, logged in as root. Here goes...
1. Prerequisites:
syslinux testdisk freedos base cd (http://www.freedos.org/)
[code]....
Acknowledgments:
1. [URL] for enlightening me on the fact that testdisk could be used instead of install-mbr
I just installed ubuntu 9.10 on a 4GB usb stick given the menu item at the top. I selected 512MB for my own user space. then I rebooted, and started updating it. I am getting almost 200 packages by default now that need to be updated.
alas, ubuntu live update now runs out of space while doing the update. this is not because 4GB is too little, but because too little space seems to be dedicated to the root partition.
what is the recommended way to have an up-to-date 9.10 copy now?
I am using Ubuntu 9.10 Desktop. My problem is when I plug in flash disk in computer in runtime system don't automatically mount partions. There isn't any new files in /dev which I could be mount. What cause it? Before everything was working.
Recently I have found myself getting terrible disk thrashing, to the point that my desktop is almost uncontrollable. I have found that killing the plug-in container task (I'm using 64-bit Firefox 4) brings the thrashing to an end. In other words it's a problem to do with Flash.
I've an HP DL380 G6 server, SAS hot swappable hdds connected with Smart Array P212 raid controller. I've configured RAID5 and installing RHEL 4.4 in the server. But its not detecting the hdds, i m suspecting that the OS doesn't have the driver for raid controller. I've downloaded the driver disk for the above controller from HP's site. The problem is the server does not have any fdd controller integrated on board, is there any way to use usb pendrives as driver disk during linux installation.
I've a dvd of "backtrack 4 r2 nemesis" which I'm about to install into my flash disk, so that I can access my installed backtrack system from not only my computer, but also from another computer by using the flash disk. "I don't know how to install "backtrack 4 r2 nemesis" into my flash disk".
its very easy to rename a flash disk or even a memory card or any storage in windows because all you have to do is right click on the disk and an option is there rename, i have failed to find a way of doing this in linux ubuntu 8.04, but i understand its possible even in the command line, i need to rename my flash disk
Its very easy to rename a flash disk or even a memory card or any storage in windows because all you have to do is right click on the disk and an option is there rename, I have failed to find a way of doing this in linux ubuntu 8.04, but I understand its possible even in the command line, how to do this, I need to rename my flash disk.
I've upgraded my pc to -current. All done well. But I forgot to reinstall my nvidia driver. I have no cd/dvd-rom. How to make usb storage (8GB) for rescue.
im am new in compiling kernel, i had kernel 2.6.32-5 on debian 6 , so i compiled kernel 2.6.38.6 , my system can boot and up but i have a problem with flash disk and CDs and DVDs , now i cant mount these cases, in compiling i select CD-ROM /dvd filesystem and Dos/fat/NTFs filesystem too
