OpenSUSE Install :: Middle Of Copying Files From Comp To Cellphone The Xp Has Crashed?
Apr 9, 2011
in the middle of copying files from my comp to my cellphone the Xp has crashed. When reboot, got a notification that:rootnoverify (hd 0,0)NTLDR is missingchainloader +1I found a way to possibly repair the xxxxxp, I just don't know if it can mess up my suse side, have 11.3this is the solution for xp;If you get the "NTLDR is Missing" error, follow these instructions:
1. Load Windows XP CD into CD drive.
2. Make sure BIOS is set to boot to CD drive.
3. Boot the computer from CD.
[code]....
View 4 Replies
ADVERTISEMENT
Mar 3, 2009
I've been having trouble copying files. When I try to copy something, it starts copying, and after a few GB, I suddenly get an error. It tells me its unable to write to the disk. After this, the only way to be able to write to the disk again, is to reboot the system. I then get to copy a few more files before the same error appears. The partition in question is formatted as ext3, using opensuse 11.0 with KDE.
View 3 Replies
View Related
May 25, 2010
I have noticed a really bad problem on here that i never had on windows 7 even with overclocking.
It seems the fans stay on and are basically idling or are at minimum speed and the computer and graphics cores are just idling at 99c which is really dangerous, but not critical yet since this is an alienware laptop and the technician did say its temperature rating is above that.
The problem is I need to get the multiple fans in the case to start up and cranking like they do to keep the system really cool in windows 7. I kinda wanna get this fixed ASAP as i dont want to constantly be running at this temperature.
View 9 Replies
View Related
Feb 14, 2010
I've discovered that Dolphin seems to lose random files when copying many large folders.
I first noticed this a few months ago when I tried to copy my music library from one folder to another on the same HDD. It consisted of around 600 folders and 6500 files. During the copy there were no errors but after the copy I found that some of the newly copied folders were missing files. I put it down to human error or a glitch.
Yesterday I tried to copy 13 folders containing rips of some of my DVDs. Each folder basically had one film of either 700MB or 1.4GB. Again no errors showed up during the copy but I found 3 of the newly copied folders were empty.
It's not so critical with music or films but I can't afford to lose work data like this.
Has anyone experienced or seen a similar problem with Dolphin? I'm going to have to do some more extensive testing but this is not good.
The first time I noticed the problem I was running KDE4.3.4 (I think) and now the latest was with KDE4.4.0.
View 9 Replies
View Related
Jun 18, 2010
I have just visited this page here, Updating openSUSE - openSUSE I have been trying to update my OpenSuSE system for a week now and I have absolutely no idea what causes this problem. The update would start but would stop right in the middle and refuse to install some pulseaudio(...) package... It would indicate that network is down while I am sure it is up.
I am behind a proxy and I have again and again made sure that the proxy settings are correct and alright. Since it downloads some of the packages in the start I believe my connection and settings are OK. Maybe the SuSE server is down, but not for a whole week, I don't think so. I would also like to mention that I have only tried updating through YaST GUI and I am, as of yet, unaware of any console or command-line methods of updating.
I really would like to update my system because I happen to be paranoid in matters of computer security. (Just kidding) But since I cannot install any updates it should mean I might have problem installing new software. So my digital life is literally crippled because of this problem.
View 9 Replies
View Related
Nov 2, 2010
I have a problem with burning some disks. I believe the problem to be when the file sizes are large. using suse 11.3 x 64 and updates done. k3b version 2.0.1-1pm 2.7 burned normal dvd yesterday with3.5 Gb + 1.5Gb files. Tried burning to BD-R disk with 11.5 Gb file. I have burned blu ray disks before with my machine but used nero, I would prefer to use k3b as should do this. I get error of mkisofs crashed and following error log
[code]...
View 3 Replies
View Related
Mar 23, 2011
Decided today is the day to do the network upgrade of my 11.3 to 11.4. One small problem: The repository has stopped responding, right in the middle of the install! Anyone have any ideas on how to recover, or should I just wait it out?
View 4 Replies
View Related
May 21, 2010
when I try to copy files from ftp server, at some moment speed falls to 0, i recive message "copy stalled" and my system frozen.I used Opensuse 11.2 (kernel linux 2.6.31). Some people advise me to upgrade the kernel. I upgraded it to linux-2.6.34, but it did not fixe a problem.Copying from ftp is very important for me, i like opensuse, but if i will not fixe this problem, i will must to change the OS.
View 5 Replies
View Related
Jun 4, 2011
I have Ubuntu 10.10 running here and a Windows 7 desktop. I'm using samba to share files and folders. I have full read/write access to the 7 box, and vice versa. However, whenever a user of the 7 box drops a file on my Desktop, for example (it could be any of my shared directories), it always has a padlock on it and I have to chown it before I can move or delete it.Can anyone tell me how to get myself permanent ownership of these files? I'm pretty sure I had this problem once before, and it was an issue of adding myself to a particular group, but I forget.
View 3 Replies
View Related
Jan 11, 2011
During my backups I'm finding that rsync is copying all files, instead of just what's changed.
I'm rsyncing between 2 USB external hard drives. One hard drive is FAT32 and one is NTFS. I've examined some of the files and believe that the difference is that there's a 1-second modtime difference developing in some of the files somehow.
Here's an example. These duplicity files were synced from /media/BACKUPHD (the NTFS drive) to /media/VIDEOHD (the FAT32 drive) only a few hours ago this morning. They have not been touched or changed since then, but that 1-second difference in their time stamps has appeared:
Code:
tim@localhost:~> stat /media/BACKUPHD/backups/duplicity/duplicity-full.20110107T145955Z.vol10.difftar.gpg File: `/media/BACKUPHD/backups/duplicity/duplicity-full.20110107T145955Z.vol10.difftar.gpg'
[Code]....
View 8 Replies
View Related
Apr 18, 2010
First off. I'm not using Ubuntu Server. But I'm trying to get XAMPP set up so I can test Wordpress themes I make. Using 9.10. I got XAMPP installed using the Instructions from Apache Friends. When I went to Localhost I got the language page. Selected English but nothing happened.
Here's my Index.php:
Code:
<?php
if (!empty($_SERVER['HTTPS']) && ('on' == $_SERVER['HTTPS'])) {
$uri = 'https://';
} else {
$uri = 'http://';
}
$uri .= $_SERVER['HTTP_HOST'];
header('Location: '.$uri.'/xampp/');
exit;
?>
Something is wrong with the XAMPP installation :-( I searched and found a couple Index.php files. Deleted one. And now when I go to localhost I get a "Index of" page.I removed the XAMPP folder, Deleted Apache, PHP from Synaptic(They got reinstalled when i reinstalled XAMPP btw). Installed LAMP but it still does it. Maybe reinstall XAPP and copy the index.php files from another Comp?.
View 3 Replies
View Related
May 1, 2011
I am attempting to migrate from Mandriva to Ubuntu and attempted to install the 11.04 and 10.04 CD distos on a 7-year old computer (Elite Group L7VMM3 motherboard, 1.4 ghz AMD Duron, 1.2GB RAM, 40GB IDE HDD).
The 11.04 installation CD makes it through the HD partitioning (erase everything), Computer name, time zone, and keyboard detection, but hangs after starting the "Copying files" stage of the install. The progress bar stops just below the in "Copying files...".
The 10.04 installation CD makes it through the "Installing the base system", "Retrieving console-terminus" with the progress bar stalled at 6%. Although the computer is old, Vista successfully installs on it.
View 4 Replies
View Related
Jan 3, 2011
I've set up my parents' machine running KDE 4.5 and want them to use the Gwenview import function from the Device Manager popup when transferring image files off photo CDs or other inserted media, since it's the easiest method for them to comprehend. All the files on their photo discs are r-xr-xr-x by default so they're unable to rotate or modify the images once copied to their hard disk. I want to set one specific images folder on their system to automatically force any files placed there to be rw-r--r-- (and rw-rw-r-- for another shared images directory elsewhere). It seems that umask won't work since that can only take permissions away and not add them, and I'd rather avoid getting into messy ACL configuration. Is there a way to achieve this either generically or some hidden config in Gwenview itself? I use KRename myself for such tasks but this is way too complex for my parents to understand so I need something that works without them having to do anything.
View 9 Replies
View Related
Aug 13, 2011
I have a build-in card-reader in my notebook. When I insert a sd-card the card is mounted but as soon as I start copying the files to the harddrive, the sd-card will unmount and than mount again. Every time I start copying I have the unmount followed by a new mount. I tried with different sd-cards and I have the same problem. Card reader works fine on windows. But now I don't have windows anymore on this notebook so I need to use the card-reader on opensuse.
View 9 Replies
View Related
Sep 21, 2011
I was trying to install openSUSE11.4 using the Live CD. But when it started copying the root filesystem, it hung on 15% and waited forever. The CD stopped spinning too.
View 1 Replies
View Related
Oct 9, 2010
I can ssh to the server but it wont allow me edit files, even though I have basic text editors like gedit and notepad installed on my windows computer. Anyone have an idea what the problem is? (I get an error message like this-(gedit:23978): Gtk-WARNING **: cannot open display
View 3 Replies
View Related
Dec 22, 2010
I've some virtual desktop. Iǘe some folder views in one on the desktops wich i would like to appear on the others, is there a way to copy them
View 3 Replies
View Related
Jun 23, 2011
when I get into the login page, I can only see the background and the login box in the middle of the page just turns whole white and keeps flashing. no response for any clicks. I was force to ctrl+alt+F1 to switch to init 1 to do my work. But I still want to use my graphical desktop either KDE or Gnome is ok. I am using gnome.
View 5 Replies
View Related
Jan 27, 2010
Have been running 11.1 on a generic notebook (eRacks) just fine until a few days ago when CUPS couldn't be reached. Rather than futz more with 11.1, I decided to install 11.2 (which has been on my desktop). Using the same CD, which continues to check ok, the install has failed many times at about the same point: 87% through "copying root filesystem" in yast2.
Specs: Intel P4 2.4 GHz, 1.5 GB RAM, ATI radeon PV250Lf
The HD was partitioned into /, swap, /home, and an extended partition of /opt, /var, /usr. Only / was ext4 and the rest were ext3. Tried various options:
* no apic
* no acpi
* "noapic acpi=off" entered manually
* Vesa instead of 1024x768
Each time had to edit partition table to mount the extended partitions. Always formatted /. At first didn't format the extended patitions, later formated all but /home. Then set yast2 to format / as ext3, to match the other partitions. In the sysinfo page the / partition is now shown as /mnt containing 723.6 MB out of 7 GB, still formatted as ext4. On rescan by yast2 partition manager, / shows as ext3. The install halts every time with an error while "copying root filesystem." Tried booting from the CD direct to install and to the Live OS followed by install--same result. So, hours later, went back to 11.1--which installed in minutes.
View 4 Replies
View Related
Nov 18, 2010
I have this statement which greps .csv files. Code:my @files=grep {$_ =~ /.csv/}What about if I needed to get files with the word 'hosts' in the middle?
View 2 Replies
View Related
Apr 10, 2011
My wife's Windows Vista laptop crashed and now will not boot. It is a Compaq and when we turn it on it loads into the HP recovery program. The only option is to format the drive and reinstall windows.
We can't do this however because we need to extract the files for my wife's college classes. I was told that you can use an Ubuntu Live CD to access these files so I burned a CD with 10.10 on it. It access's the computer and it appears to access the folders from the hard drive but all the folders are empty. Also the partition appears empty as well.
I found a thread on here that mentioned that the file system needs to be closed for it to be mounted but the computer had to be forced shut down so that isnt an option. Also i read something about chkdsk /f.
View 9 Replies
View Related
Mar 4, 2010
Suddenly the mouse middle button paste feature does not work in Bluefish and OpenOffice. It is driving me crazy. I have become so used to this feature I am constantly forgetting to ctl c/v to cut and paste.
It works everywhere else. ( For example, I can use it in this text box that I am typing this message in. ) and when I select text in either Bluefish or OpenOffice it shows up in Klipper. Strangely, if I select that text in Klipper I can paste it into either application with the middle button.
This just started a few days ago. I have no idea what changed on my system. It is a KDE4 desktop, if that is relevant.
View 2 Replies
View Related
Oct 29, 2009
Playing around with 11.2 RC2 since a few hours. This is my first encounter with Amarok 2. Still trying to find everything I used in Amarok 1. But one thing annoyes me.
Right in the middle of the window is a panel for which I see no use. I found I could remove the things that are in there, but now there is a text that orders me to push the + and to add things (never in my ...). I managed to move the borders at the left/right of it to make it smaller, but still a piece of annoying, space taking, part of the panel is there.
Did anyone succeed in removing it completely and does she/he want to share the howto with me?
View 8 Replies
View Related
Aug 29, 2010
I want to use find and scp to copy files. Is there a way to copy files that have spaces in their names? I know you can add " tags for a single file but can find do that? This is the command that i use:
scp $(find -iname "*.avi") destination
View 12 Replies
View Related
Oct 30, 2010
I was told fedora is great operating system but all i run is into trouble, hours spend on searching for solutions and never get an easy answer as it is on Leopard or even windows 7.What's my problem. I installed a new dvd copy of fedora13, and now connected 2 USB hard drives that seem to connect fine, can access everything but if i try to copy files to one of the drives it says i don't have permissions, and the fields to change permissions access are blank.
View 1 Replies
View Related
Sep 9, 2011
My Source folder contains 424.8 GB in 502,474 files. My Destination folder was created fresh, and after the copy contains 394.0 GB in 486.514 files. I am running it as grsync with root authority. The only options are to preserve time, permissions, owner and group., and to produce a verose output and transfer progress. There are no exceptions specified to skip any files.
The rsync command is this:
rsync -r -t -p -o -g -v --progress -c -l -H -D -s /mnt/Backups/monthly.3/ /mnt/EX-Fantom/monthly.3/
I have run it again to give it a chance to get it right. Same result. The source is in an rsnapshot folder, but this is the first backup, the original, containing only whole files, not links.
View 3 Replies
View Related
Jan 19, 2010
I need to copy some files from an OpenBSD 4.5 server to my Ubuntu set up via flash disk tell me what commands to enter on each in order to do this please? I believe OpenBSD is UFS and I'm running 9.10 so Ubuntu is ext4
View 9 Replies
View Related
Apr 6, 2010
I am trying to copy files across a network using terminal. i know this is possible but i can't find a way. but i can paste smb://xxx.xxx.xxx.xxx/myfolder in the address bar in a folder and navigate to the correct area.is there some other way i can do this?
View 8 Replies
View Related
Jul 27, 2011
I had to leave rather suddenly (decision was Germany's, not fiancee's), and now am in the States again, but my files are still there. There are lots of things (mainly photos) on there, that I would like to have here. SOME stuff is on CD/DVD, but there is stuff that isn't.
Is there some way that I could access her computer and just copy files to mine?
(I picture two folders, one on hers, one on mine, and I just dragging an icon from one to the other - but I don't suppose anything's THAT easy...)
Naturally, her computer would have to be on, and I assume she could not be using it herself. Naturally also, I would get her permission first...
I assume that it would take a while, but if it were as simple as the icon thing I described above, then I could just go away and come back later. I assume something would be running to make sure that the destination file and source file were identical before proceeding to the next file.
[Before you suggest: why doesn't she just copy the files to DVD's and mail them to me? She is not all that computer saavy, I'm afraid, and trying to explain it all, including the exact folder names and such, Plus, how to use a DVD/CD burner and software... Plus translate it all into German... If I were rich enough, I could just go there and do what I needed, but that is not in the cards for the present. ]
IS there a way to copy stuff from her computer to mine?
View 2 Replies
View Related
Jun 7, 2010
I have a new network attached storage unit that I'm trying to transfer my data to. On this NAS, it has a very basic linux installed with SSH enabled. Browsing through the programs installed on it, i found smbclient. Am I able to copy files directly from my old NAS to my new one using smbclient?It would sure beat transfering 950GB from my old NAS through a computer then onto my new NAS.
View 1 Replies
View Related
