I can not get ubuntu to install on my workstation. I have the 64-bit cd (am currently trying the 32-bit cd with similar results) and it won't install. I get to the ubuntu splash screen with the 5 dots underneath it and it looks like it's trying to run for several minutes. After the several minutes, the screen simply goes black and I can't do anything.
View 8 Replies
Clean install on dell d400 laptop, worked fine with 9.10 but 10.04 gets past the stick man then after several minutes with the red/ white buttons a quick flash of colour on the screen and then nothing, just a dead PC.
Have tries alternative F6 and also i915.modeset=1 and 0 but no change. Pre release 10.04 worked fine just a problem with the official release
I have a 10.04 installation that is hanging at the boot splash screen. Any ideas how to start troubleshooting? I checked the filesystem with fsck and all okay. Also ran spinrite to check general condition of hard disk. Okay there too.
View 2 Replies View RelatedI tried to upgrade from 9.10 to 10.4. Installation went fine except for one message. Do not know the message, but wrote down the path of the file: /etc/kernel/header-postinst.d/dkmsAfter installing had to restart and now the computer hangs on at an ugly kubuntu splash screen (looks like purple 16 colors)Starting the failsafe start there is a error message 'no screen found'I got the feeling it has to do something with my nvidia card, but not sure. So I tried looking for an answer, but finding something meanwhile you do not know what your looking for is difficult. Somebody has some suggestions? If additional information is needed just le me know.running 64 bitAMD 3500+gigabyte m57 sli s4nvidia 7200xp is still working from other hard disk*edit* added some details
View 2 Replies View RelatedSo I turned off my computer the other day (I leave my laptop on, pretty much 24/7 I only turn it off if I have to, or I forget to plug it in I turned it off this time just because it was feeling warm)...
And when I went to turn it back on, the splash screen was big and ugly looking, then the orange ("loading") dots loaded to the end... but then it just stopped.
My computer wouldn't boot up... so then I used one of the older versions (you know grub lets you select versions before upgrades or whatever)... and the boot splash was the nice small version... and it loaded just fine, but then after the splash screen went away... the monitor just stayed black... same thing with the version before that.
So then I tried recovery mode on the first one (the latest), and when I clicked "boot normally" it took me to shell. However, everything was working fine, I could load up my non-x dependent programs like IRSSI just fine.
I think it has something to do with me installing the ATI proprietary driver (which was stupid of me, Ubuntu was handling my graphics card perfectly without it... and I hate using closed sourced software).
Adding several 2TB HDDs somehow crashed SATA controller on motherboard.Fedora will no longer boot.
I connected HDD (with Fedora OS) to another computer.Fedora gets past GRUB, but hangs before loading the splash screen.Is something wrong with GRUB settings?Previously, I had dual boot at GRUB (Fedora and WindowsXP).
What is the easiest way to get Fedora to boot properly on another system?I need access to those files.
I have failed to install kUbuntu for a several days already, so I am currently on SuSE (hate it, love ubuntu...). I don't know what is wrong with my PC, but something ain't right. I tried:1st: Installing kUbuntu x64 - Result: Freeze on loading screen (I think..don't even remember anymore ).2nd: Running Live CD ("Try Kubuntu") - Freeze on splash screen, at the Hard Disc icon (can't get past that one).3rd: Installing Ubuntu x64 with Unetbootin - (GNOME variant). - I get a nice graphic card error, can't unerstand anything - screen messed up.4th: Installing Ubuntu x86 with Unetbootin (GNOME) - same as 3rd time.5th: Decided that maybe something was wrong with the download. Downloaded kUbuntu via torrent. Installed with Unetbootin in a flash - no change.6th: Installed SuSE7th: Downloaded kUbuntu x86, burnt, tried installing, back to 1st step.Is this an infinite loop ?Hardware specs:
250GB x 2 Seagate Barracuda ( I had them connected in a RAID0 via bios previously(Windows 7), had trouble installing suse because of this, but I deleted RAID information and disabled raid in BIOS setup )GeForce 9800 GX2Quad 2 Core 2.664 GB unbuffered ram ( 4 x 1 GB)
I boot up after a fresh install and I don't get a boot splash screen. I really cant find a way to fix and some times it does not go to the login screen.
View 1 Replies View RelatedTrying to install Ubuntu (tried several releases) on HP Pavillion Pentium 4 Proccessor 515 2.93 Gig 1M L2 cache 533mhz 90nm . Have 1 gig ram and 1Tb hd. Hangs on initial install screen for ever. Tried versions from 8.10 (origional disk) to 11.01. Machine works perfectly on Windows XP but who wants that? The model is pavillion 1000 system number pl397aa.
View 7 Replies View RelatedI just installed Ubuntu 10.10 on a vostro 1000 laptop using standard configuration.I repartitioned the whole disk for Ubuntu. Now, when starting up Ubuntu, it appears to log in fine, but right near the end of the theme and before the desktop loads, it hangs, repeating a slice of the intro music over and over again. What could be causing this problem?Note: On every ubuntu disk I use, it also says that modules/..../Kernel something is missing from the disk quickly before booting the live session.
View 1 Replies View RelatedInstall from x64 DVD seems to have gone OK but 1st boot to welcome screen where user is added always hangs.I've done the install multiple times and no joy on any of them.I'm experienced with Fedora and had 10 installed on the same machine with no problem.Hardware is an HP d5000t.Quad core IntelNV graphics adapter8 Gig of memoryVista on a raid 0 by itselfFedora on a 320 Gig WD drive by itselfSuse 11.1 on another 640 Gig WD drive by itself
View 2 Replies View RelatedI am trying to install Ubuntu 10.10 x64 on a HP Pavilion p6565uk.
My PC is x64 compatible, although ubuntu will not install.
I don't get to any gui, it says ubuntu will continue install in 5 seconds, at 0, nothing happens. The CPU light is flashing, but nothing happens.
After about 10 minutes, it reboots, but when the HP splash screen shows (Before the boot selection screen) it just hangs. I have to do a hard shutdown to boot back up.
I am using wubi for install.
Ubuntu and right now I am running it inside Windows. I burnt it onto a cd so I could install it onto my 2nd harddrive. I know the cd is fine. When I boot off the cd a purple screen loads up with some weird symbols at the bottom looks like a picture of a battery = and then a picture of a stick figure man. If I hit f6 I can get to the option screen. I've tried using noapci, nomodeset, disabling the framebuffer, and vga=normal. None of them work as soon as I hit enter to start installing Ubuntu it just sits there on the menu screen and never does anything.
View 5 Replies View RelatedI have a pretty old acer lap top. I used to run xubuntu on it, then I formatted it and installed freeBSD just to check them out. I tried to install last version of xubuntu then, and I got a message that /dev/../loop0 couldn' d mount or sth then I learned about lubuntu and I tried to installed them but I tried both a dvd and a cd and on both cases after I select language and "install on this machine" I just see a screen with 4 red dots writing "Ubuntu 10.10" that stays like this forever.. and nothing happens. the same if I select to boot from the cd just to check the environment. I then tried a ubuntu-studio dvd I had handy just to see if this would work - and it started installing as expecting, I cancelled it after a while. how to get lubuntu running?
View 4 Replies View RelatedWhen I install Ubuntu 11.04 with Wubi, I get this freeze screen after I reboot and get past the Ubuntu splash screen: url
As you can see, it's a scrambled picture of my Windows desktop. This happens with every other version of Ubuntu also.
I'm running a 64-bit PC and I don't wanna waste another CD or use a USB to install, because I actually progress further in my efforts whenever I use Wubi.
I received the Ubuntu CD by mail the other day and tried to install a dual boot with it. I first tried it out by running from the CD and the first problem I had was the screen froze after the splash screen. So I lurked around for a bit and found out that I can press any key on the screen with the keyboard and person to get to a different screen. At this screen I entered "F6" and then entered "nomodeset", this allowed me to pass the splash screen.
Next, I got into Unbuntu but I found out that the keyboard and mouse weren't working, so I lurked again and found out that I have to enter "noacpi" (sorry if I got that wrong, I forgot the name ). I ran by CD once more and everything worked, so I decided to finally install it next to my Vista. However, after installing it goes straight to the splash screen, and the freezing happens again. The screen where the keyboard and the person are not showing up so I have no idea how add the "nomodeset" and "noacpi". So my question is, how do I get to the screen where I can add both those things? Also, is there a way to add it permanently so I don't have to keep pressing F6?
Im trying to install fedora 11 from the live CD and when i get into the CD meny where it says "boot" and "press tab for boot options" i press enter. then a bunch lines flash across the screen with a lot of error messages. then the fedora loading bar at the bottom loads. hangs for about 1 minute at the very end. then the GMD screen appears. But the GMD screen is all out of place and its patchy as if my graphics card was causing some kind of error
View 1 Replies View RelatedI have been running 10.04 quite successfully, when I upgraded to 10.10, I have a problem with the newer kernels. If I let it boot into the latest one 2.6.35-23, I get the Ubuntu 10.10 splash screen for a second then a blank screen, same with 2.6.35-22. I have to run with 32-25 to get it to load the gui.
I have an AMD Sempron 2800, 1.6GHz pc, but I'm not sure if it's running 64bit.
If I re-install Grub 2 from the live CD should that reset all the personalisations such as as splash screen and colours in the Grub splash to default? In my case they are not resetting. I would expect them to revert to the default black/white you get when initially installing the OS. the Grub timeout to be a lot less than its supposed to be? e.g. the default timeout setting of 5 seconds is more like 2 or 3 in reality, and when I set my prefered value to 2 seconds it results in being about 1/4 sec or so.
View 9 Replies View RelatedSince updating my graphics driver on ubuntu 10.10, My splash screen has been inconsistant and messed up. Sometimes ill get random command lines mixed in with the usual splash, sometimes the splash wont show and it will just be black till the desktop appears, sometimes it flashes on and off. I originally tried fixing the resolution and just made the problem worse. Then I tried installing a new splash via gnome-look.org, but it just made my shut-down splash blank and didnt effect my splash at startup. I just want the original splash that ubuntu is supposed to have.
View 6 Replies View RelatedI'm running 64 bit Ubuntu, and on the start-up after I pass the GRUB it goes blank for a minute then briefly shows the splash for 5-10 secs and then jumps to the login screen. Also the screen is offset by about 10-15 pixels but from the login screen onwards it is centred. (It's also like this for if I'm in recovery mode)
How do I fix this and Im wondering if it is a hardware problem?
I recently installed Ubuntu Studio and after an update the standard Plymouth splash screen began to show. I tried changing it back via the "sudo update-alternatives --config default.plymouth" method but I am getting a blue kbuntu splash screen instead of the ubuntu studio splash.
View 1 Replies View RelatedAfter installing Fedora 15 from LiveUSB and rebooting it just hangs on a black screen with a blinking cursor (underscore) in the top left of the screen. If it's reached grub, it isn't responding to any commands, and mashing several key combinations (such as ctrl-alt-f1) will produce a beep usually emitted only by the BIOS (hinting that it may never be making its way to grub).
The only particularly interesting thing about the install is that by default it wanted to boot itself from the MBR on my primary-master (Windows) disk. Instead I selected the option to boot from "the first partition in sdb1", which is my primary-slave (Linux) disk, (the first partition being /boot). This way I can change which OS boots by changing the boot order in my BIOS, and so avoiding bootloader wars.
I ordered a SuSE 11.4 installation DVD from an online Linux Distro distributer that I've used before with no problems. I did this rather than burn my own DVD from the website. I thought that I might perform a fresh install of SuSE 11.4 on this Dell 1420 Laptop that is currently running Ubuntu 11.04.
Note, this is a completely fresh install, not a side-by-side installation with Ubuntu; I followed the installation sequence that completely repartitions the entire disk for SuSE, and accepted all of the suggested options regarding logon, etc.
Everything goes well ... sort of. The first install didn't reboot correctly, i.e., the set-up that is supposed to run after the initial install never happened and I had to manually power-down the machine and restart from the "safe mode." Needless to say, that didn't work as expected. So, I re-install, from scratch, trying different options: for instance, instead of LVM, I decide to have an un-encrypted partition scheme and accept the "obvious" options ... thinking that the LVM options interacted badly with the install. Eventually I get the installation to proceed correctly, or so it appears: it goes though the entire sequence, including the re-boot, building the default image, etc.
I test this image by removing the DVD, power-cycling the machine, and all looks good, so I begin the process of installing software updates, etc. Being paranoid, I re-boot the machine, and all restarts correctly, etc.
Now here's the annoying thing. The next day, I power the machine on, and it locks at the splash screen. By the way, these are the exact symptoms that I experienced with the bogus/incomplete installations. The boot sequence proceeds up to the splash screen and waits forever.
So, in sum: I spent inordinate amounts of time attempting to install this software, carefully following the instructions provided by the installer. In every instance, after leaving the machine off for a day or so and rebooting, I am met with a splash screen that sits forever. Needless to say, I am extremely reluctant to repeat another day of software installation to only have to re-start with no assurances of success. Either I go back to ugly Ubuntu (which has always worked out of the box, by the way), or I look at other options. I was hoping to use SuSE, but I really don't care which distro is on that machine as long as it works and it provides TeX, R, Emacs, Scheme, and a few other software packages that I'm sure are of no interest to your customer base.
How do I do that ? Currently I have Kubuntu/Mint KDE installed as my main and only OS so the GRUB splash is disabled by default, how do I enable that (so I'm able to change the boot commands to go to single user mode).?
View 2 Replies View RelatedLast update 26/03/2010 splash screen was changed... again!
View 3 Replies View RelatedI recently installed Ubuntu 10.04 on my laptop (clean install, not upgrade), and when I turn my computer on, I get a black screen instead of the purple "Ubuntu" screen before my system logs on. When I log off, I get the purple "Ubuntu" screen, but not when I log on.
View 6 Replies View RelatedI have been trying to install ubuntu for a few days. After I select install on the first screen using live it will switch over to the UBUNTU splash screen. I can hear the CD drive and that hard drive working for about 45 seconds to a minute then nothing. It will just sit there on the splash screen for as long as I let it. By let it i mean hours. I and installing it on a Toshiba laptop with 1.6 ghz centrino processor, 160 gb hard drive, and 2.5 gigs of ram.
View 7 Replies View RelatedI upgraded a week or so ago to 10.04, and everything was working fine. Then suddenly a few days ago the computer froze at the splash screen on startup. Thinking it was just some sort of neurotic, temporary issue, I restart again, but no luck -- same problem.
In terms of what I changed before the problem happened, I don't recall changing any system settings. On possibility is my changing things to skip the login screen and go strait to my account, but I believe I had done that a few shutdown/restarts before.
The new splash screen would fly by in two shakes without, the dots moving left to right.And I was looking at more blackness than purple. So what I did was this without installing a slower uvesa v86d update. I used that as a reference point instead. This is what me Grub2 looks like: /etc/default/grub
Code:
GRUB_DEFAULT=2
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
[Code]...
