Ubuntu Installation :: 10.4 - Corrupted Image Of Loading Screen
Apr 30, 2010
I have been trying to get the live image of 10.4 to work on my machine, however I keep running into video corruption issues. When I try to run the live image, from a CD or USB stick, it shows the loading screen fine and the bars underneath the logo move and look fine. Then it seems as though it has loaded and goes to desktop, but it only shows a corrupted image of the loading screen. After a few seconds there seems to be some sort of intro sound playing, however it is very scratchy/corrupted. I'm not sure what the issue is and I have tried 32 and 64 bit versions.
I have also tried installing via Wubi and get the same results. I'm really at a loss of how to correct the problem. Not sure if it is a video driver issue, or some other issue. I also can't seem to find a safe graphics mode to try and work around the problem.
My specs are
DFI Lanparty Expert
nvidia 7800 gt
2gb ram
x-fi sound card
View 1 Replies
ADVERTISEMENT
Dec 26, 2010
Is there a known problem with the Lubuntu 10.10 image here? I have downloaded it to two different computers, then burned the images to two different blank CD's (different brands) and neither loads. Both only get as far as the Lubuntu menu, once ENTER is pressed at that point to load the LiveCD, a blank screen eventually appears with a flashing cursor at the upper left of the screen, that's it. They were both burned using the slowest burn speeds available.
View 9 Replies
View Related
Nov 22, 2010
I downloaded latest Ubuntu version 10. I bruned it to CD disc. I run WUBI.exe. Some files copied to the hard drive, but the error message interrupted in the middle of the installation process. It said unable to install -- permission denied. I don't see what is wrong. My Windows XP is full administration control. All the files should be able to write to drive c without any problem. What is the cause? Could files in ISO image be corrupted?
View 2 Replies
View Related
Jun 11, 2009
Yesterday, i just got my Fedora live DVD. When i tried to boot it from my CD/DVD ROM drive, it seems to hang when it's just about to finish loading. From one of the prevous threads, one of the members said that i had to have 2 partitions on my HD. Currently, i already have 2 partitions. Can someone give me advice on what to do??
View 3 Replies
View Related
Oct 25, 2010
I have been using ubuntu wel a long time now and I know my way around in linux but I recently updated my laptop from ubuntu 10.04 to ubuntu 10.10 all went fine until I had to restart my laptop. I got a purple screen (loading screen) with 4 dots and a oldskool like font which said: Ubuntu 10.10 Right after that the screen goes purple and its like the system halts I hear no login sound etc just a purple screen. So I did a clean install from the 10.10 live cd which booted perfectly fine and the system was also useable like before. But when I installed the system and rebooted it again no problems.
But when I tried to install the proprietary nvidia driver (the recommended one) I got the same problem again the purple screen. After searching a while on the internet I only found posts which had the problem with ATI cards but my laptop is fitted with a Nvidia Geforce 9300 M card. So I tried several things like removing the xorg.conf (read it somewhere) which ofcourse did not work, and booting in graphics fail safe mode which worked. So the point is in 10.04 and 9.10 I CAN use my video card drivers but not in 10.10 is there a solution to this problem? I am talking about the 32 bit version of ubuntu and here's my system hardware profile:
Intel core 2 duo t7350 @ 2,0 ghz / 3mb l2 cache
2 GB DDR3 ram
160 gb hdd
Nvidia 9300m gs
Chipset: I dont know sorry
Model: Samsung R710
View 2 Replies
View Related
Feb 22, 2011
another post about this. I just don't know how to handle this, as I'm pretty nsee the grub loading menu, but screen just freezes after, no way I can reboot, or open a console. In recovery mode I can log as root in console, though.I run Debian 6, 64 bits. I have an intel q6600 and a nvidia geforce 9800GX2.
View 9 Replies
View Related
Jan 24, 2010
I'm COMPLETELY new to linux. I"m running Ubuntu 9.10 and TRYING to install Devede. I have tried the Terminal, Synaptic Manger, and the Add/Remove and still keep getting this same error. I'm running a regular 32 bit Pentium 3 process to test if I like Linux or not. this is what it says: E: /var/cache/apt/archives/libavcodec-extra-52_4%3a0.5+svn20090706-2ubuntu3_i386.deb: corrupted filesystem tarfile - corrupted package archive this is not a DUAL boot computer either.
View 8 Replies
View Related
Feb 5, 2010
I'm using ubuntu 9. For some weird reason, sometimes when i log in only the ubuntu logo shows up. It says "Grub loading" and then the logo appears, but the harddrive isn't accessed. After about 2 minutes, the logo disappears and the screen goes blank. I have to shut down the computer manually. The weird thing is, it only happens every so often..about every other boot up.
View 1 Replies
View Related
Mar 1, 2010
Here's my problem, i have 1 Ubuntu cd, (8.10, free cd), 1x 9.10 32 bit from a friend, and a 64bit 9.10 from a friend. Also i have downloaded 9.10 64bit ISO, (making sure the md5 was correct)This is what ive tried: - Installing inside windows, cd - Installing inside windows, iso mounted - Installing via cd on boot - Installing via usb on boot- Booting from cd/usb, like testing, and install from that (but got to loading screen..)Ive tried the above with all the Ubuntu's mentioned.Yet all have got to the Loading screens and just stopped.With the USB one, once (it had casper on it?), it had errors such as IO, memory buffers etcSo why doesnt either 32 or 64 bit work on my system, is there something i missed?
View 4 Replies
View Related
Mar 29, 2010
Did a clean install of Ubuntu 9.1 and asked that I provide a username & pw. Rebooted after the install and came to a command prompt asking for the username. Provided it, hit enter and then provided the pw. Next, Ubuntu went to a command prompt as follows:
username@computernam:~$
How do I get to the Ubuntu home screen?
View 1 Replies
View Related
Jun 30, 2010
I'm attempting to install Ubuntu Netbook remix (however I have tried others) on a 32 bit laptop but after it goes through that ubuntu loading thing, it goes blank after that and I've determined that it's not the cd and it's something to do with the hardware after looking at other posts with similar issues. I do not have an operating system on this laptop.
View 3 Replies
View Related
Sep 5, 2010
ive downloaded the Ubuntu CD from the official website and burned it twice, once one a dvd and the other on a normal 700MB CD-RW.in both, the screen went blank after the loading part before the main menu (installation, try it blah blah..)what should i do?btw i use a windows XP and here is my hardware details...sapphire hd 5770 1gb, 4 gb of ram,Intel Core i5- P55 .5 ghz, i think that its enough for the minimum of the ubuntu isnt it?
View 4 Replies
View Related
Jul 24, 2010
I am doing a fresh install of Ubuntu 10.4 and I cant install, when it says Ubuntu in the loading screen after a while the entire sceen becomes distorted, like all messed up and I cant seem to do anything, I am running Opteron 175, DFI Expert Motherboard and Nvidia 7800GT.I am attaching a picture of what i am getting
View 6 Replies
View Related
Sep 4, 2010
I'm trying to install Ubuntu on a Dell computer of mine but I can't get it to boot past the loading screen. I'm using 10.04 live CD. At the loading screen (boot, memory test, etc..) I select to boot the live CD and after that, I get a black screen followed by no signal from my monitor. My monitor is a 42" LCD TV (I had plans to turn this PC into a HTPC using Ubuntu and Boxee). I know Linux will work on this box, because it has in the past. Now, before I used to have an ATI Radeon X 1300 PCI-E card and now I am using an ATI Radeon 2900GT, and since cannot boot.
Does anyone have any idea on how I can get this to work?
View 2 Replies
View Related
Oct 10, 2010
i have just upgraded to 10.10 from 10.04. i have an acer netbook (d250 one). i had boot loading screen problems with 10.04 too. i hoped that this issue will be fixed with the upgrade but not. after the grub menu, a black screen appers until the password prompt screen. there is no purple loading screen, just a black screen. is it a plymouth prob? also i realised that when i playing videos in videos the sound crashes a bit. i'm using google chromium. but my main problem is the booting one not the flashplugin. the new 'ubuntu' font is awesome. i <3 it.
View 9 Replies
View Related
Jan 21, 2011
Try to load my system today and nothing come up, only the terminal window. Whatever I type in is working, like now I type in the terminal firefox and it is how I ended up here. Try to type thunderbird in the terminal and my mail server started no problem. But nothing on my screen, don't no where to go from here.
View 9 Replies
View Related
Jan 27, 2010
I recently upgraded from Hardy to 9.10 Kubuntu. The install went smoothly, and when I boot up, the loading screen (the one with the progress bar) does its thing. Then I see the 'waiting' cursor (in Kubuntu, the two dots chasing each other around in a circle). I see this for about two to three seconds, then the entire thing freezes up and I can't do anything, including switching to a virtual console. How do I figure out my system's dying words so I can figure out what's going wrong? As a (sort of) aside, when I open files in /var/log for reading with cat <file> | less, I have to Page-Down a whole bunch to get to the most recent stuff. Is there a way to jump to the bottom, or read with something other than what I have been using?
View 1 Replies
View Related
Aug 13, 2010
It is the same drive that I used to install ubuntu, but kubuntu isn't working!
View 3 Replies
View Related
Nov 23, 2010
When I start my laptop: Dell Vostro 1720, it starts loading grub, I select Ubuntu, and after that, appears one image of ubuntu logo
and few points, like loading... I show it : Since I updated to ubuntu 10.04, I had this problem
1- How to change it ?
2- When I install StartupManager, it appears only with two options: Startup Options and Advanced. And there I can't change the ubuntu loading image. If we check google images, we can see more than this... I suppose this is caused by ubuntu startupManager download link....
3-I tried copy by different ways the splash.png. With gnome-conf, setting the key in apps...splash.png. Didn't work. Also I tried to replace "/usr/share/images/xsplash/bg_2560x1600.jpg" to another pic I have, but no result.
View 9 Replies
View Related
Jun 14, 2011
Once I launch google chrome
14.0.792.0 (Developer Build 88942 Linux) Ubuntu
(problem happens across various chrome versions and firefox too)
and I visit a site with graphics, still image or ....., I get a screen overlay of the website image positioned near top left of my monitor which overlays its graphics on top of windows of other applications. Interestingly, when I kill chrome the image disappears, then reappears on re-launch of chrome. Somehow chrome is controlling the rendering of its video memory, from killed tabs, outside of its own window.
This I have seen for firefox as well. Its been happening for few months, not on every browser launch but daily nonetheless. The video corruption also prevents mouse cursor cut N paste of text on any application which happens to have its window overlayed in this manner.
I have all the latest updates
ubuntu 11.04
nvidia driver 270.41.19
screen captures of offending overlay do not show up, though I could photograph my screen if need be. Have stopped using beta chrome daily builds, now using default google chrome to verify whether symptoms disappear.
I see no apparent errors in system log or X server log
View 2 Replies
View Related
Nov 19, 2014
Naturally a Windows user, because all of my computers were with pre-installed Windows and I was young.. and I get used to it..In the time of.. growing up I became programmer and learnt how bad is actually Windows coded. Not only that.. Linux has better support for developers.So.. I was Windows user till yesterday. I finally decided to work on Installing Linux or more specifically - Debian.I love everything part of the GNU - GIMP, GTK+, Gedit, GCC...
Well I can't use my PC, both of my operation systems are non-functional.Windows get stuck (which is something completely typical for Microsoft stuff) on Windows logo screen, or safe mode loading files..Debian installation is messy.Firstly I installed Debian 6.0 on a Virtual DVD Disc mounted. I followed the installation process strictly and move forward to Debian startup.It asked me for account. root as "username" and the password as "password" didn't work so I logged in as "localhost" normal user.
However.. I started to realize that I actually also had to install the Graphical Environment in order to have Debian with the desired GNOME Desktop.. I went to aptitude to install the Graphic Environment Package but it said that I have no root rights.. I tried to log-in again, using the correct details but failed.I tried to get in, using the sudo command, but the sudo command also didn't work. Of course.. since I can't install packages, I can't either install sudo."su -" or "su" also prompt me to select a password which I apparently have no clue of.
Then I went to Debian Recovery, because there I was logged as root. It also pointed out that "Root Account is locked". I went to install packages finally.. But when the installation started to proceed It asked me for disk insertion in a specific folder?There I got lost completely.
View 12 Replies
View Related
Mar 24, 2010
With my limited knowledge about integrating kernel modules into the initrd image. The issues is that currently when we are trying to install the RHEL5.4 image onto a 64 bit box we need to load the megasr driver initially before the ahci driver. Hence we use a seperate diskette for the same. We want to integrate the megasr files into the RHEL image itself.
View 5 Replies
View Related
Nov 21, 2010
I am using a Dell Latitude D610 that is a few years old, and running Fedora 13. I do not think hardware is too relevant to my problem, nor is it an issue with my OS itself. I do not dare perform an upgrade to Fedora 14 at this point because this is an active work machine, for school use. To the heart of the problem, I am extremely irritated by the erratic behavior of Epiphany Browser (and just an hour ago, Midori). If I open more than a few pages at once (e.g. ctrl-clicking a bunch of Google search results) more often than not I get a chain of "cannot resolve hostname" blank tabs.
Oddly enough, I refresh the pages (one by one, of course - I don't know how to mass refresh) and they load properly! The problem is more prominent on Wikipedia - most articles have images embedded here and there amongst the text. When I visit the page, none of these show up - the page loads, and after I see the blue mercury-looking progress indicator shoot to the end, the spaces where the images should be are blanked and in the centers lie a little thumbnail of a grey photo with the corner turned up - e.g. generic-can't-show-the-image.
This is remediated by visiting wikimedia.org or refreshing the article itself, whereupon the images fall into place. The problem seems to carry over into Midori browser, which I installed a few hours ago just to use as an alternative - I say "had" because just now, the problem resolved itself. I strongly suspect that it has to do with my changing my cache size from 169 MB to 13 MB, which I did just now. That issue is now trivial; next question: Google Docs behaves very strangely in my browser. Whenever I make a normal alphanumeric keystroke, it shows up fine; but "backspace" and "delete" and "enter" are both doubled.
I double-space between my paragraphs by accident and when I make a mistake in my typing I often suck myself into a cycle of mistakes. E.g. "Polanrd" --> "Polan" --> "Pol" --> "Pold" (hitting backspace twice to trim off "rd", but Google Docs redoubles the keystrokes into four backspaces and I end up taking off too much and adding the lone "d" in the wrong place). The problem shows up to a lesser extent in the built-in chat, wherein backspace is not affected, but every time I hit "enter" my chat appears twice (as though I had hit enter twice).
View 6 Replies
View Related
Apr 15, 2011
like any other Linux newb, I came to Ubuntu because my Windows crashed one time too many. And I chose Ubuntu because "it just works". But these past few days that hasn't been true. I'm posting this from a netbook with Ubuntu, and am having no problems whatsoever, but normally I use an Acer Aspire 5920G laptop. I'll include the specs as written on the sticker:
* Intel Core 2 Duo processor T5250 (1.5GHz etc)
* Up to 1024 MB Nvidia Geforce 8600M GS Turbocache
* 2 GB DDR2
Let me know if you need more details, and I'll add them later. Now, what happened was I clicked "hibernate" while leaving Firefox open. (I've done this hundreds of times, no problem) And when I went to turn it back on the next day there were weird graphical glitches in the loading screen, and it booted to the "tty1" prompt screen. I did a lot of googling and found quite a few posts about it, but the solutions either didn't work, or I didn't understand them. After trying several different suggestions from this forum and others, I managed to delete the graphics drivers. That enabled me to boot in low graphics mode, and naturally, I tried a whole bunch of things to make it work properly again. That only made it worse. Now it went straight from the loading screen to just blanking out and turning the display off. So, I tried new things. Over and over. The weird thing is even when I disconnected my harddrive and ran from a Live USB, the problem persisted. Could there be an issue with the graphics card itself? Anyway, after reconnecting the harddrive I tried to boot again. And it suddenly worked. Even HDMI to my bigger screen worked.
[Code]...
View 1 Replies
View Related
Jan 7, 2011
I'm trying to install Ubuntu 8.04 on my computer (yes...I know version 10 is out...I will get it when I get this version installed).Here's my dilemma, I get through all the way to the partition. I don't have Windows on the computer, so check the button labeled something like "Whole Disk" or something along those lines. So, after a while (about 1+ hour), it all of a sudden turns into a black screen with the "running" mouse on top of it. The screen isn't frozen, the mouse is still moving, and it sounds like the computer is still "chugging" away
View 1 Replies
View Related
Aug 4, 2010
Unfortunately my experience in the Unix* based world up to this point has only been using web servers and administrating them, no GUI experience of any kind so I am completely unfamiliar with the setup and entire usage of Xorg or any other Window manager at this point. The issue I am having is with the screen resolutions I am being allowed to chose for my Dell Studio 1535 running Fedora Core 13 and the KDE 4 desktop GUI, thus my issue since I am not really familiar with how to run a Unix* based GUI in the first place.
The basic information, if there is more needed just advise what and what command gathers that info (or what conf/log I should look into in order to find it). Laptop is a Dell Studio 1535 Video is the Mobile Intel GMA X3100 ATI Radeon HD 3200 Graphics. LCD interface is the LVDS.
So far it seems to give me modes for 1024x768 and on down, nothing above this. I believe I am supposed to use the radeon driver being that is the type of card it is but every time I change the xorg.conf file to use this instead of vesa the system wont get past the loading screen anymore upon reboot and nor can I seem to find a way to bring up a command line so I can hit up the Xorg.0.log to see what is wrong or change the xorg.conf file back to the original driver it had listed.
I am going to assume this is a missing driver or something else it hangs on but without being able to get access back to the system and having to rebuild it again (re-install via live CD) I am basically out of luck at this time. Sorry for the rather poor post but I do hope to receive some basic directions on where to go from here with this issue
View 12 Replies
View Related
Jun 16, 2010
I've had this odd, stubborn problem that seems to be related to the nouveau video driver and certain kernel builds: opening or saving full resolution jpeg image files using GIMP takes from 1-5 minutes and causes xorg CPU usage to reach almost 100%.This also occurs when using UFRaw to open Canon raw image files. The problem is not intermittent, it happens each time I open a file. Opening photos in the default image viewer works fine.This bug has vexed me on and off for the last couple of months, and seems to be triggered by a combination of kernel version and the Nouveau driver. I switched to Debian Squeeze from Ubuntu 10.04 because I was experiencing slow image open times in Ubuntu 10.04 (using the Nouveau driver).I did not experience the bug running Squeeze with the nv driver and kernel 2.6.32-3.
I did not have the bug running Squeeze with the nouveau driver and kernel 2.6.32-5 backported from Sid.I began experiencing the bug again after the Squeeze updates on June 14th (still running nouveau and kernel 2.6.32-5). I update daily so it's likely to be that day's updates which caused the bug to reappear.Just for grins, I installed the Liquorix kernel. The bug does not occur using kernel 2.6.34-0.dmz.10-liquorix-686 and the nouveau video driver.I have a Nvidia FX5500 video card. I prefer the nouveau driver to nv as my display seems to behave better. The Nvidia proprietary drivers are not an option because they produce X freezes when I am doing photo editing. The liquorix kernel seems to be working fine, but for long-term stability I'd rather be running a mainline Debian kernel.
View 5 Replies
View Related
Apr 9, 2009
I'm trying to build a dual boot ubuntu 8.10 and fedora 10.I have ubuntu sucessfully installed. with a free partition ready for fedora.I cant seem to get fedora past the beginning of the install. Once it says its loading anaconda, my screen either goes blank, or the anaconda fails and the install exits, telling me to reboot my system.I have downloaded the DVD twice. once from the website, and i think when I bruned it it didn't burn right, I then downloaded it from torrent just to be safe and reburned at the slowest speed. It passes the media test.
I have been reading around it may be cause of my video card?My computer is the following.AMD Athlon +2400 XPXFX Nvidia Geforce 6800 GT or something close.80 gig hard drive1.5 gigs of DDR ram.MSI Motherboard not sure of model off top of my head.I really wanna get this dual boot working, As I feel fedora may have advantages over ubuntu. I was going to try to get ahold of another video card, and maybe try that. What do you think I should do
View 14 Replies
View Related
May 20, 2010
I am very happy with Ubuntu 10.04 that I downloaded, burnt to CD and installed (I am a newbie to Linux), but I am finding a little problem on an old Sony lap-top, with a rather old-fashioned almost square screen.The top bar of any screen image is just off the top, and I can only see a quarter of it, which makes using the max/min and cancel buttons a bit hard to use. I know I can resize the screen, but it goes back to the original next time it is used. Is there a permanent fix?
View 1 Replies
View Related
Jun 20, 2011
I mount a few locations from a VMware virtual machine, but currently every time I start up VMware I need to re-mount the locations once the VMware image has started up fully, which gets tedious. I'd like to be able to mount them automatically when VMware is started.
I generally double-click the .VMX file (which is associated with VMware Player) to launch the virtual machine, but once it has finished loading I would need to run the mount commands manually or execute a bash script that does it.
Is there any way you can think of to have it done automatically? One way I can think of is to start my virtual machine by running a script that starts VMware player, sleeps for a minute or so, then runs the mount command - but setting the right sleep interval would be difficult because this varies a fair bit - and overall, it's a solution that's kinda icky and that I'd like to avoid if there's some better option.
View 3 Replies
View Related
