Ubuntu Installation :: Failed From Windows XP - Files In ISO Image Be Corrupted?
Nov 22, 2010
I downloaded latest Ubuntu version 10. I bruned it to CD disc. I run WUBI.exe. Some files copied to the hard drive, but the error message interrupted in the middle of the installation process. It said unable to install -- permission denied. I don't see what is wrong. My Windows XP is full administration control. All the files should be able to write to drive c without any problem. What is the cause? Could files in ISO image be corrupted?
View 2 Replies
ADVERTISEMENT
Sep 1, 2011
My HP Netbook crashed. The Windows XP system files corrupted and Windows absolutely will not run. I planned on using Ubuntu to recover it, and then install Ubuntu permanently to save it in the future. Before you ask, every other utility has failed on me. UBCD included, which did nothing but provide me with errors upon errors just trying to run it.
The netbook has no CD drive.The only internet around is a wireless signal... my netbook has a broadcom wireless card that is never recognized. I'm using someone elses working laptop to connect online and get things I need, make boot devices, research for help, etc.This laptop has barely any hard drive space. Currently it has 1 gb remaining for doing anything.I have three flash memory devices:2 gb SD card. My netbook refuses to recognize it as a boot device.2 gb flash stick (that's actually an mp3 player). My netbook refuses to recognize it as a boot device.512 mb flash stick. This DOES work as a boot device.
So far my 512 mb flash stick has run Damn Small Linux and Ubuntu Minimal on my netbook. Of course, both are useless because the netbook cannot access internet, nor does either OS recognize my wireless card. This flash stick is, obviously, too small for a regular Ubuntu installation or any other Linux distribution that can help (as far as I know).
So, in order for this to work, I have to be able to do one of the following:
Install Ubuntu from a different OS, like Damn Small Linux or something small enough to boot on my 512 mb stick. Ubuntu can be put on one of the other, larger devices, maybe to be accessed for installation. No idea how to do this, let alone safely.
Install Ubuntu Minimal OFFLINE. This question was asked multiple times on these forums and none were answered. Is there a way to run minimal, and use offline sources for the install?
Get the normal Ubuntu installer under 500 mb. Its overwhelmingly frustrating that I'm just barely unable to do this. I've read of Ubuntu Customization Kit, which ended up being lots of useless files and reams of gobbldegook. I've heard Ubuntu is packed with additional, nonrequisite software which makes it so large. Why can't there be a halfway version between normal and minimal?? Not everyone has internet and not everyone has a CD drive or large USB stick! Is there a way this can be accomplished? Does this version exist?
I have limited time and resources. Before you ask, no, I cannot afford a larger USB stick. I'm pinching pennies right now and there's nowhere near here that sells them anyway.
View 9 Replies
View Related
Apr 30, 2010
I have been trying to get the live image of 10.4 to work on my machine, however I keep running into video corruption issues. When I try to run the live image, from a CD or USB stick, it shows the loading screen fine and the bars underneath the logo move and look fine. Then it seems as though it has loaded and goes to desktop, but it only shows a corrupted image of the loading screen. After a few seconds there seems to be some sort of intro sound playing, however it is very scratchy/corrupted. I'm not sure what the issue is and I have tried 32 and 64 bit versions.
I have also tried installing via Wubi and get the same results. I'm really at a loss of how to correct the problem. Not sure if it is a video driver issue, or some other issue. I also can't seem to find a safe graphics mode to try and work around the problem.
My specs are
DFI Lanparty Expert
nvidia 7800 gt
2gb ram
x-fi sound card
View 1 Replies
View Related
Jul 26, 2010
before i proceed,I'll like to say that I'm a complete newbie, but enjoying my time with Ubuntu.
Recently, due to hard disk failure, some of the System files got corrupted, I have no idea to which files, but booting Ubuntu from the latest kernel is not working, instead I have to select the previous version from the grub screen.
How to recover these files? Is there a way by which Ubuntu automatically scans and repairs the system files.
View 2 Replies
View Related
Aug 16, 2011
i had ubuntu installed on my computer via wubi inside my windows 7 OS..after a while something went wrong with the partitions magic stuff and windows 7 got corrupted but ubuntu kept working Love ubuntu for that.since i had my stuff backed up and saved in ubuntu i thought i could make a backup off the root.disk file and reinstall windows and that what i did but then i installed ubuntu again via wubi but replaced the new root diskk with the old one that i had backed up.but now it says it cant find disk :O .so it takes me to a shell i seriously need to get that root disk to work or ima loose really important stuf.
View 3 Replies
View Related
Jul 7, 2009
I download the live 64 and burned it to a disk after it burns to the disk Brasero checks and says "error some files could be corrupted." I burn it slowest burn same thing happen. I downloaded thinking I had a corrupted download. Same thing happen. I never had a problem burning iso until now. What am I doing wrong?
View 6 Replies
View Related
Jan 24, 2010
I'm COMPLETELY new to linux. I"m running Ubuntu 9.10 and TRYING to install Devede. I have tried the Terminal, Synaptic Manger, and the Add/Remove and still keep getting this same error. I'm running a regular 32 bit Pentium 3 process to test if I like Linux or not. this is what it says: E: /var/cache/apt/archives/libavcodec-extra-52_4%3a0.5+svn20090706-2ubuntu3_i386.deb: corrupted filesystem tarfile - corrupted package archive this is not a DUAL boot computer either.
View 8 Replies
View Related
Sep 20, 2010
My normal update/upgrade of packages on a LAMP server (Ubuntu 10.04) for my business has resulted in the following error:
Code:
Examining /etc/kernel/postinst.d.
run-parts: executing /etc/kernel/postinst.d/nvidia-common 2.6.32-24-generic-pae /boot/vmlinuz-2.6.32-24-generic-pae
run-parts: /etc/kernel/postinst.d/nvidia-common exited with return code 10
Failed to process /etc/kernel/postinst.d at /var/lib/dpkg/info/linux-image-2.6.32-24-generic-pae.postinst line 1003.
[Code]...
View 8 Replies
View Related
Aug 28, 2010
I try to install linux on hpc mini. Let's crack some keyboards. I have just bought a new pc: hpc mini compaq! I find windows Xp rather fine; but let's try linux. The PC has no cdrom, so, I cannot boot from any ISO of debian. I choosed testing netinstall, and followed the how to given on the debian website from another PC using knoppix iso cdrom. I did placed five files as shown here onto my pendrive as followed in one howto: I found 5 files for testing:
Code:
debian-testing-i386-businesscard.iso initrd.gz vmlinuz
and
Code:
26644480 Aug 28 17:44 ../squeeze-debian-testing-i386-businesscard.iso
with :
[Code]....
View 2 Replies
View Related
Sep 20, 2010
I use KDE 4.5.1 on Ubuntu and every time I maximize a window the windows decoration look wrong: there are no more borders on the decoration when maximized. The windows title and the buttons have no space between them and the screen border at all. Not even one pixel.
- buttons & decoration still there
- decoration borders, corners & placeholders all gone!
This happens with every single windows decoration I choose.I use all default settings on the kwin-effects.
View 3 Replies
View Related
Jan 16, 2011
When playing dvd's, vob files and wmv files, the image comes with high contrast colors ,very intense red/green/blue. very dark too. I have vlc 1.1.4 installed, using ubuntu 10.10, libdvdcss2 installed. for the rest of the video formats it seems to work fine. any ideas on what should I start debugging?
View 5 Replies
View Related
Aug 18, 2011
I have all of my music in mp3 form on an external HD. When I copy it to my home folder for use in Banshee 2.0, some of the music files become corrupted.When these copied mp3s are played, they have annoying, intermittent distortion throughout some of the songs. In an effort to try and isolate the problem, played one of the distorted songs directly from the file on the external HD, and it played flawlessly. I then downloaded Clementine and had the exact same distortion on the playback from the copied file, and then no distortion from the external HD file.
So at this point, it seems like the mp3 are getting messed up when they are being copied from the external HD to the computer.I am using a USB 2.0 port for the file copying.
View 8 Replies
View Related
Apr 16, 2011
I recently downloaded a copy of Kubuntu from the official website...when i finished downloading it and tried to run it inside windows, my virus scanner immediately picked up several malware inside temp files in my computer called win32 antivirus. I attempted to install kubuntu on my computer on a partition (i've previously done this on other computers no issues) but it had multiple partitions. Instead i tried to do a clean install of kubuntu then attempt to install vista again then. However it is now telling me my files are corrupted and will only operate Kubuntu. This is not what i want, i wanted to operate both on partitions as i haven't completely figured out how to use kubuntu?
View 1 Replies
View Related
Apr 23, 2011
I'm having problems with the ftp-server ProFTPd,If I transfer files from a Linux host to a Windows client, it says that my transfered files are damaged, so I'm unable to open them..I've searched this forum and several people say I have to set the default transfer mode to 'binary' mode.I did that, but it didn't work at all for me... so despite the binary transfer mode my files are still damaged when I transfer them.when I do it through SSH, it works fine, so the problem is the FTP-server...
View 3 Replies
View Related
Jan 8, 2010
I was resizing my windows partition and accidently turned my computer off. When I went to run a disk check from gparted I get multiple filesystem errors. Chkdsk /r when run from a recovery cd says it can't determine the size of the partition so it can't continue. Is there anyway to get my files off the corrupted partition from within linux. Right now Gparted shows that it has been resized but that it is corrupted and i can't even attempt to mount it. There are only a few files I need to get off the partition but they are really important.
View 3 Replies
View Related
Oct 18, 2010
My Windows Installation is infected even with Eset installed! I don't know how to clean it. Already tried safe mode scan, but that doesn't even clean it. The only reason I installed ubuntu was so that I could download infected files without any conserns of my windows parition being infected. When ever I download a file, I move it to the NTFS partition from where windows can access it. But just about a week ago when I booted into Windows, my whole drive was infected, not only windows installed partition but also all my NTFS partition. Can anyone please tell me how can I CLEAN the files rather than qurantine all the files which CLAMAV does!
Also, what steps should I take in advance before downloading a virus infected file? I know the virus could've have gotten in when I disable eset for some software installation but it should clean after boot or after being booted.But there should be a way to clean all my NTFS partition .... how? I don't know how to used CLAMAV properly because whenever I try to scan anything, it always returns with '0 files scan' because I think the directory scan doesn't work the way it should!
View 3 Replies
View Related
Mar 30, 2011
I have a single harddisk partitioned with Ubuntu Maverick and Windows 7 installations. I installed Windows first and then Ubuntu, after resizing partitions and adding a new one for Ubuntu. Win7 did not appear in the Grub2 boot menu. I added it (sda3), but on rebooting, I get the message "BOOTMGR is missing/Press Ctrl+Alt_Del to restart".
I understand that Win7 might have put its boot manager in another partition, and sda1 had FAT. I added sda1 as another grub2 entry, but when I try that, I get the error message "Windows Boot Manager/ Windows failed to start. A recent hardware or software change might be the cause... Status 0xc0000225/ Info: The boot selection failed because a required device is inaccessible." Attached are fdisk and parted outputs; and the grub2 files I created. How do I get Windows 7 to boot up?
View 6 Replies
View Related
May 17, 2010
I recently performed a reinstall of ubuntu after mucking up my partitions, and I am running it dual booted with windows 7.
I recently performed a grub-pc update, but I didn't know what it was asking me to do during the process itself of updating the process.
It asked me at one point where to install grub, and I selected all my partitions because it suggested that if I didn't know. I think that may have damaged my windows section, which was also selection.
I've attached the output for:
Code:
Problem symptoms:
1) Weird upgrade error in apt-get
2) Unable to boot windows 7
3) Unable to activate proprietary drivers
4) Perpetually being reminded to restart
View 5 Replies
View Related
Nov 13, 2010
I had a perfectly working Western Digital 250GB external usb hdd about 30 minutes ago. It has about 130GB of data I spent 3 hours copying to it yesterday from my Ubuntu laptop. Just to test it, I plugged it into an older Windows XP machine, and it seemed to work just fine. Then I tried to do the "Safely Remove Hardware" thing. It told me that it could not remove the external drive because another program was accessing it. So okay, I just wait a minute or two. Try again -- same thing. Tried it several more times, waiting a minute or two between each try -- same thing. Then suddenly a message pops up -- cannot write to drive. I also get another error: drive is corrupt, run chkdsk utility. Makes no sense. I was accessing files from the drive from within Windows just fine minutes before.
So since it won't "unmount safely", I just unplug it (probably a mistake, but I didn't see that I had any other choice at the moment), then try mounting it using a LiveCD of Puppy Linux -- Puppy will not mount it, just gives an error but no details.
My Ubuntu laptop, however, is no longer usable -- after I copied the 130GB of files I wanted to save to my external hdd, I attempted an upgrade of Ubuntu. It hosed. I'm still on that Puppy Linux LiveCD right now as I type.
So then. I KNOW this external hdd should be recoverable. I didn't do anything to it except let Windows screw up its ability to be mounted/unmounted, somehow. But I do not know how to go about trying to rescue it. What are the tools I should use? Is there something I can download somewhere that I can burn to a bootable CD or something that can fix a broken NTFS drive/partition? It would almost have to be something bootable at this point since I don't know how to install anything new on Puppy. Wasn't there an "Ultimate Linux Bootable Rescue CD" or something like that a while back? I can't remember it's exact name now.
If worst comes to worst, I suppose I could always reformat the external hdd and then copy the files over to it again. I still have all my files on my laptop's hard drive and Puppy can see them -- the Ubuntu upgrade I attempted did not overwrite all my stuff. But....I would just rather avoid having to spend another 3 hours or more today doing that. All my files are already on the external....I just want to fix it so that I can see them again.
View 9 Replies
View Related
Dec 26, 2010
for some reason Win7 has gone and run a startup repair (there was two boot options in GRUB, perhaps I chose the wrong one by accident) which has corrupted my GRUB. Now, the only way I can get anything to run is by booting Ubuntu of a live-pendrive/flashdrive! I tried following a couple of walkthroughs that claimed to fix the problem; and I don't doubt that they work - on someone elses computer! I receive errors whenever I try to use things like 'sudo grub' and often (but not always) with 'mkdir' and 'mount' - and I have very little idea what some of them are doing (I gather 'mkdir' is making a directory and 'mount' is mounting a device virtually, but some others are a little harder to guess)
So, I am wondering if someone has a little insight as to how I can fix this and perhaps point me in the correct direction to learning about making my way around ubuntu and these fancy terminal commands! Currently, I am at the stage where I can boot into my flash drive by spamming escape before the bootloader. However, when GRUB loads it tells me there is an error and gives me a command line; through which I have been unable to get anything to happen. I am running Ubuntu 10.10, I believe, and Windows 7 on the same hard-disk and possibly the same partition (though, I am unsure of how Ubuntu works itself into partition's). I also ran a little code (seemed somewhat like a batchfile in windows) that made a txt file of my boot info; I'm attaching it below if that helps at all. Boot Info Results:
[Code]......
View 9 Replies
View Related
Jun 14, 2011
Once I launch google chrome
14.0.792.0 (Developer Build 88942 Linux) Ubuntu
(problem happens across various chrome versions and firefox too)
and I visit a site with graphics, still image or ....., I get a screen overlay of the website image positioned near top left of my monitor which overlays its graphics on top of windows of other applications. Interestingly, when I kill chrome the image disappears, then reappears on re-launch of chrome. Somehow chrome is controlling the rendering of its video memory, from killed tabs, outside of its own window.
This I have seen for firefox as well. Its been happening for few months, not on every browser launch but daily nonetheless. The video corruption also prevents mouse cursor cut N paste of text on any application which happens to have its window overlayed in this manner.
I have all the latest updates
ubuntu 11.04
nvidia driver 270.41.19
screen captures of offending overlay do not show up, though I could photograph my screen if need be. Have stopped using beta chrome daily builds, now using default google chrome to verify whether symptoms disappear.
I see no apparent errors in system log or X server log
View 2 Replies
View Related
Feb 4, 2011
I want to add my .tar files in the .iso image of redhat cd and untar the same at desired location using some script.how do I add the files in the ISO image?where to place the script? how to link the script so that it is executed after the installation completes (redhat).
View 2 Replies
View Related
May 20, 2011
I had a usb stick running ubuntu. A coworker used this install to go around some of my companies security measures, and I was told to hold on to the usb stick in question. I copied all the files onto another usb stick in case something went wrong with the first one.
The problem: The first usb stick that was bootable has become corrupted. I still have the files from the disc, but they're not on the bootable stick.
Can i just use something like unetbootin, reinstall ubuntu, then drag all the files over?
View 2 Replies
View Related
Jul 21, 2010
It seems there is a bug with F13Files send over Bluetooth to my WM phone are corrupted.When I send files, the Bluetooth transfer starts normal, then when the transfer finishes the window stays open (like it does not complete the transfer).I am unable to run or use that files on the WM (they are binary or data) so I assume they are corrupted. I have no problem with Ubuntu/Opensuse (I have a test disk with Ubuntu and OpenSuse) only with F13.
View 2 Replies
View Related
May 8, 2010
I'm trying to upgrade everything on this computer to the release Lucid, and am getting errors retrieving some files, here's a sample of one of the errors, (the rest are very similar)
W: Failed to fetch [URL] 404 Not Found [IP: 91.189.88.31 80]
View 2 Replies
View Related
Jun 14, 2010
I have installed Lucid 10.04 server on an IBM eserver 325 dual boot with 2003. the cd rom drive on the server is starting to go out and the install worked but failed to install key applications and files. For examle- no VIM (just VI) and the apt sources.list file had one entry- the cd rom. I need to update all the packages necessary for the system to operate fully. ( I have tons of broken dependencies when trying to install SSHserver, Samba and other apps) I manually entered the muliverse and universe repositories in sources.list but this is not resolving the issues with the missing dependencies. I can get a new cd-rom drive but it will certainly take a week or two to get and I need to get this project going. I have some experience with Linux, but not enough to know if there is a magic command that I don't know.
View 2 Replies
View Related
Aug 13, 2011
I just recently installed Ubuntu on my laptop and was attempting to install Wine on it this morning. I went through the proper procedure listed on the site, but once I get back to the Software Center and hit "install" it gives me an error a second later saying "Failed to Download Package Files. Check your Internet connection."
View 6 Replies
View Related
Nov 29, 2010
I've read all the documentation on installing Debian via CD, USB, or HD.I need to install Debian on a embedded system using only compact flash.This is similar to a HD installation, but I don't have any version of Linux installed to format.Is there someway of creating a bootable CF image from a Windows system?
View 3 Replies
View Related
Apr 13, 2011
I am attempting to copy files from one server to an external USB drive on a second server. Both servers are running custom RedHat Linux, kernel 2.6. Both are setup as Check Point SecurePlatform (one is a log server and the other a management server). I am trying to archive files from one (HP DL380 G5) to the second (HP DL380 G6). I am not able to archive directly to the external usb drive when connected to the HP DL380 G5 (data gets corrupted and switches to read-only access). The external USB drive has no issues when connected to the HP DL380 G6 server, thus my reason for trying to copy the files across servers.
When I attempt to use scp to copy files between the server, I am prompted for the password. Once entered the debug shows the authentication is successful, but then no files are copied (see log below). I have tried searching for potential answers, but none have panned out. Unfortunately I can't yet post the actual scp debug log output as some of the text is viewed as a URL and not yet allowed for me. I have changed all the atsign symbols to '(a)' to avoid the URL inference.
Output log from scp attempt follows:
[Expert(a)server1]# scp -p -r -v /var/fromhere/* copyfile(a)server2:/media/disk/tohere/
Executing: program /usr/bin/ssh host server2, user copyfile, command scp -v -r -p -d -t /media/disk/tohere/
OpenSSH_3.6.1p2, SSH protocols 1.5/2.0, OpenSSL 0x0090707f
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Applying options for *
debug1: Rhosts Authentication disabled, originating port will not be trusted.
debug1: Connecting to server2 [192.168.10.3] port 22.
debug1: Connection established.
debug1: identity file /root/.ssh/identity type -1 .....
debug1: Exit status 1
lost connection
[Expert(a)server1]#
View 1 Replies
View Related
Sep 15, 2010
I have a double problem here. I had a problem with ubuntu which I more or less took care of but at the loss of much information but that is neither here nor there. The problem has to do with the here and now. I purchased a ubuntu 10.04 LTS CD. I installed it and partitioned it with my win xp. All seemed to go good but the problems seem to arrive when I booted to the other partition side.
I am able to select the windows xp side and hit enter and and boot to xp. However when I wanted to go to the ubuntu side of things this is where the problems happens. I click enter the ubuntu selection and this error shows up."Windows could not start because the following file is missing or corrupt. <windows root> system32hal.dllPlease re-install a copy of the above file."
The only way I can of getting to the ubuntu side is by inserting the ubuntu cd into the cd/dvd drive. However when I do I get this message."Installation Failed.The installer encountered an unrecoverable error. A desktop session will now run so you may investigate the problem or try installing again."I am hoping that someone here will be able to assist me in finding an solution to my dilemma.
View 9 Replies
View Related
