Ubuntu Installation :: 10.10 - No Graphical Screen And Only Text Screen Comes Again And Again
Oct 28, 2010
I have downloaded ubuntu 10.10 64bit and have also burned it to good disk at 4x speed. when i boot it from cd everything goes simple and fine till it comes to a mixed orange colour screen and then nothing goes further, it just halts there with this full blank screen. so i have to do a hard shutdown. then i tried wubi.it went good. after rebooting it asks for installation options. there are five of them. in the normal mode the same thing gets repeated again. but in safe graphics mode ubuntu gets installed but few errors are shown after installation. there is no graphical screen and only this text screen comes again and again.
My laptop specs are as follows:
View 4 Replies
ADVERTISEMENT
Jul 21, 2011
I am trying to load up the NVidia driver in Fedora 15 and am stuck. After boot up the graphical login screen comes up fine but when I go to log in I get an error message and it asks me to try to login again. I need to be able to get into text mode so I can edit some files but I do not know how to do this other that starting in multi-uder mode by editing /etc/inittab (or in FC15, editing some links in /etc/systemd/system/). Is there a way to get to text mode from the graphical loginscreen or do I need to get a rescue disk and startup in rescue mode to change files?
View 4 Replies
View Related
Jan 3, 2011
I'm looking for software which will allow me to record a screen-cast of a terminal based application, recording keystrokes, timing of keystrokes, and audio. I see a couple of advantages to this approach over video capture: Display independence: the viewer can display text in any resolution/style they want, not limited to the resolution of the recorded video. Ability to copy and paste text from the screencast.
DSABE? (Does Such A Beast Exist?)
View 6 Replies
View Related
Jun 28, 2009
I've just dicovered GNU screen, a program that allows you to setup multiple terminals, from which you can detach and re-attach, so that you can have programs running in a session to a remote server and then log off from that server while the programs keep running! Great for over night copying jobs on my file server. the output of a command is rather long and the text scrolls off the screen. How do i scroll up to read the output? Shift + page up doesn't work...
View 1 Replies
View Related
May 12, 2010
I can't seem to get Ubuntu to run on my old Dell Dimension 2300. It boots to a purple screen then it goes to a black screen with a load of writing nothing else happens after this screen. [URL] Could someone advise how I can get it to work?
View 1 Replies
View Related
Feb 3, 2011
I followed the "how to make a USB install drive" guide on ubuntu's main site. But when I go to actually boot the drive in my netbook I only get this text on the screen.
[Code]...
View 2 Replies
View Related
Jun 11, 2010
So everything went fine in my installation of ubuntu 10.04 but when the pc was reset after installation, it goes to the black screen with the white writing and then does nothing. To check if there was a problem with the disk I had burnt, I installed an an older version of ubuntu (8.something) which had previously worked and the same thing happened: installation goes fine but then when I reset it goes to the black screen with white writing and does nothing. I then tried to install 10.04 again through usb with the same results. Do I need to change a BIOS setting?
View 2 Replies
View Related
Jan 16, 2011
I'm some what new to ubuntu and i would really like to start using it as my main operating system and get rid of windows. The first problem i face here is that I am unable to install Ubuntu using the normal gui mode.As soon as i select the option to install ubuntu the files starts loading and then the screen goes blank.. but the monitor is still live. So i installed ubuntu using the text based installer.. everything went fine, i installed the system and at boot loader i selected my Os but still the old demon comes in "Blank screen". I've tried all the related forums and tried all the options best to my knowledge, but its still the same.. I am not even able to get a command prompt/terminal. I know that this is a problem with my ATI (i can hear the sighs!!!!!) video card. Now I know that Ubuntu is being loaded cause i can hear the welcome sound of Ubuntu(drums sound).
View 2 Replies
View Related
Mar 3, 2010
Recently my Ubuntu has started dropping to bash shell instead of starting the graphical login. It first asks me login name and password(in the shell) then gives me a command line. I can then type startx to start it. It seems to start alright but that is not how it is supposed to work.
Doed anyone know how I can get it back to default behavior?
View 2 Replies
View Related
Oct 23, 2010
It has been a few days I'm struggling to install Kubuntu 10.10 on my computer. I started with the normal CD, burnt it and boot the computer. Halfway through the graphical installer, I got a black screen and system froze up. I tried several things (including running the installer with nomodest and single options) but didn't help.
Then I downloaded the alternate CD and started to install in the text mode. I could get passed installing the kernel and programs but right after adding a user/password, the text installer crashed with a black screen and system froze!
Now, I already have Windows 7 64 bits on this computer and have done all kinds of memory/hardware tests on it and it works fine. The CPU, GPU and the case is well ventilated so nothing is overheating. I also run heavy loads on Windows (MATLAB, Chess engine tournaments) for hours and hours and never had a crash. So I guess the hardware is fine.
Here are the specs of the system if it can help:
CPU: i7 950 GPU: ATI HD5870 (model Gigabyte GV-R587UD-1GD) RAM: 12 GB DDR-1666 Motherboard: Gigabyte GA-X58A-UD3R (rev. 2.0) Optical drive: Liteon ihbs112 USB Mouse and Keyboard
Windows is installed on a SSD and I have 2x 2.0TB hard disks for data. Kubunto, however was being installed on a separate and dedicated 200GB hard disk. During installation process I format and partition this drive. I didn't disconnect/disable the other drives. In BIOS, all SATA controllers are set to run in AHCI mode.
My primary suspect is the graphics card. However, why it would ever crash even in the text mode? Although it works fine in Windows even with heavy gaming so graphics card is itself stable.
View 5 Replies
View Related
Apr 20, 2009
Trying to install FC10 on an older Dell GX150 machine, and I get to the point where the graphical install app loads, but I am not able to see any text on the screen, other than the back/next buttons, and when I click on next, I can see that it goes to a new screen where it looks like it's asking for some text input, but I can't decipher what it's asking for, and if I try to type in the box, nothing happens.
I think I read somewhere on here about using a different boot option to get FC10 to work in a Virtual PC, but not sure if it would apply here (and can't seem to find that thread anyway!) I am booting off the FC10 DVD, and can get to the menu to install/upgrade, rescue, boot locally, or test memory. If I hit TAB, I can edit the boot option - I just need to know what to put in there to get this to work!
View 4 Replies
View Related
Jan 19, 2011
I have installed Ubuntu 6.06 LTS via the command line interface. I installed onto Microsoft Virtual PC on the mac. The installation completed successfully. On first boot, I see the text is spread out very wide on the screen. It's like the screen has been zoomed out greatly.
I assume I have to modify the x11 configuration, but I forget how to do this.
Here is an image of the screen:
I tried installing a more recent version of Ubuntu but ran into other troubles. more on that later.
View 5 Replies
View Related
Jun 30, 2010
I have just been using distro's that install with a graphical interface, but some of the distro's forum members recommend are installed text mode only. How difficult is a text mode install
View 9 Replies
View Related
Jun 3, 2010
I'm using debian etch and I've installed some automatic updates, after that some programs weren't running. So I restarted the pc. Now that the computer boot up normally but when it reaches the login screen it just emit a sound in the pc's speaker,he login screen flickers and is showed another login screen again and again and again (it's automatic). I can logon using the option single-user mode in the grub options, any idead on how can I fix it?
View 5 Replies
View Related
Jan 5, 2010
After a recent "yum update", my laptop screen locks up during graphical boot. I use rhgb on the kernel line. The container on the screen fills up with charge and then the screen locks. I have to use the power button to reboot. If I press ESC when the boot splash appears (i.e., boot in text mode), it works.
If I set plymouth to "details" mode using
$ plymouth-set-default-theme details --rebuild-initrd
It boots up correctly. This is equivalent to a text boot screen. I doubt whether it is a video driver problem. I reinstalled the nvidia driver and it is working. I also reinstalled plymouth and plymouth-themes-*.
View 5 Replies
View Related
Sep 21, 2010
I've just installed fc 13 on my laptop. It's got windows and mepis linux on here also. the installer for fc only found windows and I was wondering if there's a way to modify the graphical grub screen to contain mepis linux or if i have to disable it and use a standard text screen for grub.
View 1 Replies
View Related
Jun 14, 2010
I was in the middle of deleting the Xine movie player, and clicked a box wrong. I lost everything possible on the graphical desktop as well as a log in screen for Ubuntu 9.10 (karmic). Since then I did a few things:1. apt-get install ubuntu-desktop2. apt-get install kubuntu-desktop3. apt-get remove kubuntu-desktopAfter all this, I still have the login screen for Kubuntu. But I don't want that. I want to get back to the Ubuntu login screen, and the orange colored desktop. Right now -- after I log in -- I only have a terminal to use. And I have the blue background of Kubuntu. What do I need to do to get rid of the Kubuntu graphics and back to my original login screen, plus the Ubuntu (karmic) graphics and toolbars / menus?
View 2 Replies
View Related
Jun 26, 2009
Is there any way to change the resolution and refresh rate of the graphical log on screen in Lenny? I have the right resolution and refresh rates set for after I log in but I don't know which file to edit to make Lenny use the right settings for the log on screen.
View 1 Replies
View Related
Oct 25, 2010
I have been using ubuntu wel a long time now and I know my way around in linux but I recently updated my laptop from ubuntu 10.04 to ubuntu 10.10 all went fine until I had to restart my laptop. I got a purple screen (loading screen) with 4 dots and a oldskool like font which said: Ubuntu 10.10 Right after that the screen goes purple and its like the system halts I hear no login sound etc just a purple screen. So I did a clean install from the 10.10 live cd which booted perfectly fine and the system was also useable like before. But when I installed the system and rebooted it again no problems.
But when I tried to install the proprietary nvidia driver (the recommended one) I got the same problem again the purple screen. After searching a while on the internet I only found posts which had the problem with ATI cards but my laptop is fitted with a Nvidia Geforce 9300 M card. So I tried several things like removing the xorg.conf (read it somewhere) which ofcourse did not work, and booting in graphics fail safe mode which worked. So the point is in 10.04 and 9.10 I CAN use my video card drivers but not in 10.10 is there a solution to this problem? I am talking about the 32 bit version of ubuntu and here's my system hardware profile:
Intel core 2 duo t7350 @ 2,0 ghz / 3mb l2 cache
2 GB DDR3 ram
160 gb hdd
Nvidia 9300m gs
Chipset: I dont know sorry
Model: Samsung R710
View 2 Replies
View Related
Dec 26, 2010
Is there a known problem with the Lubuntu 10.10 image here? I have downloaded it to two different computers, then burned the images to two different blank CD's (different brands) and neither loads. Both only get as far as the Lubuntu menu, once ENTER is pressed at that point to load the LiveCD, a blank screen eventually appears with a flashing cursor at the upper left of the screen, that's it. They were both burned using the slowest burn speeds available.
View 9 Replies
View Related
May 12, 2011
When I install Ubuntu 11.04 with Wubi, I get this freeze screen after I reboot and get past the Ubuntu splash screen: url
As you can see, it's a scrambled picture of my Windows desktop. This happens with every other version of Ubuntu also.
I'm running a 64-bit PC and I don't wanna waste another CD or use a USB to install, because I actually progress further in my efforts whenever I use Wubi.
View 6 Replies
View Related
May 27, 2011
'm trying to duel boot windows 7 and ubuntu 11.04 on an Acer Aspire 5736, but when I try to boot from the cd (which I burned with InfraRecorder) it first goes to a black screen with a blinking under score in the corner, then to a purple screen with a couple symbols at the bottom, and then the screen goes black and nothing else ever happens
View 4 Replies
View Related
Jun 1, 2010
After succesfully installing Ubuntu 10.4 x32 and rebooting pc hangs on black screen with a flashing white dot in the top left corner of my screen, i've tried installing it twice with the same results.
my setup is: Asus p5q-e,
4 gig of corsair dual ram,
ati 4850 graphics,
onboard audio.
ahci mode
win 7 installed on intel ssd, and xp on a samsung 320 gb sata 2,
i had this configuration running fine for 2 months without boot loaders,
on pc start up i choose from which hdd to boot from.
i installed ubuntu on the samsung drive where it was recognised fine, wiped it all and installed automatically.
pls let me know if there is anything i missed, and advice if possible in what to do.
thanks
kannanni
View 2 Replies
View Related
Jul 21, 2010
I received the Ubuntu CD by mail the other day and tried to install a dual boot with it. I first tried it out by running from the CD and the first problem I had was the screen froze after the splash screen. So I lurked around for a bit and found out that I can press any key on the screen with the keyboard and person to get to a different screen. At this screen I entered "F6" and then entered "nomodeset", this allowed me to pass the splash screen.
Next, I got into Unbuntu but I found out that the keyboard and mouse weren't working, so I lurked again and found out that I have to enter "noacpi" (sorry if I got that wrong, I forgot the name ). I ran by CD once more and everything worked, so I decided to finally install it next to my Vista. However, after installing it goes straight to the splash screen, and the freezing happens again. The screen where the keyboard and the person are not showing up so I have no idea how add the "nomodeset" and "noacpi". So my question is, how do I get to the screen where I can add both those things? Also, is there a way to add it permanently so I don't have to keep pressing F6?
View 2 Replies
View Related
Aug 11, 2011
I have a question regarding to the Graphical Splash Screen. Is their a way to show the text based startup on booting your OS? So. I don't the OpenSuse Background with the loading line. But i want the half transparent black background if possible or just the black background with all the loading texts. The black and white screen.
View 9 Replies
View Related
Dec 22, 2010
I have been running 10.04 quite successfully, when I upgraded to 10.10, I have a problem with the newer kernels. If I let it boot into the latest one 2.6.35-23, I get the Ubuntu 10.10 splash screen for a second then a blank screen, same with 2.6.35-22. I have to run with 32-25 to get it to load the gui.
I have an AMD Sempron 2800, 1.6GHz pc, but I'm not sure if it's running 64bit.
View 7 Replies
View Related
May 4, 2011
I've been running Ubuntu 10.10 very smoothly for a while now. Decided to upgrade to 11.04 - managed to corrupt the hard disk the first time by letting the laptop hibernate part of the way through but reinstalled from a live CD of 11.04 and it's now working except for this issue.
If I shut the screen on my laptop (or press the screen off button) either the screen won't come back on or it will but frozen (I can move the mouse but not click on anything etc.) In this state music continues to play (from spotify under wine) and if I press my hibernate shortcut (power button) the computer hibernates, only to wake into the same situation. I've got a Dell Latitude D520, upgraded to a bigger hard disk and more ram - the ubuntu partition has 50gb. Windows is working fine.
Edit: I noticed a sticky thread which includes something about a blank screen but I think this is a different issue?
View 2 Replies
View Related
Feb 22, 2011
another post about this. I just don't know how to handle this, as I'm pretty nsee the grub loading menu, but screen just freezes after, no way I can reboot, or open a console. In recovery mode I can log as root in console, though.I run Debian 6, 64 bits. I have an intel q6600 and a nvidia geforce 9800GX2.
View 9 Replies
View Related
Oct 2, 2009
I'm trying to install F11 on my old FSC Amilo Pro laptop. The installer starts fine, shows up on the screen fine, but the graphic installation window is wrongly positioned on the screen. It's about 300px too far to the right and about 300px too low on the screen, so that my Next, Back, Cancel buttons etc are off the screen.
View 2 Replies
View Related
Oct 14, 2010
Two things.First off, since 10.04, no matter how many times I try to change the keyboard layout to United Kingdom, when I log back in the @ and " signs are ALWAYS in the wrong place.
Second off, I installed the NVIDIA proprietary driver to allow Compiz to work, except now my Plymouth Screen is a lot of ugly text.
View 3 Replies
View Related
