Fedora :: Screen Locks Up During Graphical Boot After Update?
Jan 5, 2010
After a recent "yum update", my laptop screen locks up during graphical boot. I use rhgb on the kernel line. The container on the screen fills up with charge and then the screen locks. I have to use the power button to reboot. If I press ESC when the boot splash appears (i.e., boot in text mode), it works.
If I set plymouth to "details" mode using
$ plymouth-set-default-theme details --rebuild-initrd
It boots up correctly. This is equivalent to a text boot screen. I doubt whether it is a video driver problem. I reinstalled the nvidia driver and it is working. I also reinstalled plymouth and plymouth-themes-*.
View 5 Replies
ADVERTISEMENT
Nov 21, 2009
since i have installed the nvidia drivers i have lost the graphical boot and just had a bar at the bottom of the screen instead. i tried to get the graphical screen back by adding vga=795 to my /boot/grub/grub.conf but when i rebooted not only did i not get the graphical boot or the toolbar at bottom.
i got list of all the drivers and services it is starting with ok next to it. i have also since doing this lost the bit when restarting or shutting down getting the words restarting or shutting down and just get blank screen with flashing cursor. i removed the vga=795 and i still get the list of drivers/services loading.
how do i get the quiet option back. i have checked /boot/grub/grub.conf and it has the quiet in it.i have also tried running update-grub but get message command not found. i have attached the grub.conf file
View 3 Replies
View Related
Mar 11, 2011
I have updated 11.3 to 11.4 with downloaded iso (64 bits). I have a ATI hd2400 card that in 11.3 had no additional or other drivers. Now after install of 11.4 the systems reboots in the splasscreen everytime I am now in failsafe mode to get graphical.
Output of /sbin/lspci -nnk
00:00.0 Host bridge [0600]: Intel Corporation 82915G/P/GV/GL/PL/910GL Memory Controller Hub [8086:2580] (rev 04)
Subsystem: Dell Device [1028:01c4]
Kernel driver in use: agpgart-intel
00:02.0 Display controller [0380]: Intel Corporation 82915G/GV/910GL Integrated Graphics Controller [8086:2582] (rev 04) .....
View 3 Replies
View Related
Jan 9, 2010
I have a Dell Latitude E5500. For some time I've been installing different distros on it to find which is best suited for my needs. I've tried Ubuntu, Kubuntu, Mandriva, openSuSE, Fedora, and several others. So far, openSuSE takes the cake in terms of what I need, speed, usability, etc. However, I have a soft spot for Fedora and I'm trying so hard to make things work, but I'm kind of at the end of the road unless you guys have some suggestions.
I was in the IRC chat for Fedora asking around, and one user was kind enough to point me in this direction, which made sense as to why I was having issues.
[url]
I was having mixed results, but I had also installed from a Fedora KDE LiveCD. I decided I'd try the full DVD release of Fedora 12 64 bit, so I installed it this evening.
To my disappointment, even the nomodeset parameter does nothing. I get to the blue screen where there's some kind of logo in the center that fills in with white. After it fills in, an F appears. That's where it stops. It just goes no further. Further adding to the confusion is the fact that the fix lists a kernel there, indicating (to me at least) that the kernel listed is when a fix was deployed. I have a newer kernel than that, and despite that I still have these issues.
So needless to say, I'm using my laptop as testing grounds to plop a different distro than Ubuntu on my laptop and 2 servers full time. I really want to make Fedora work, but at the same time I have to use what works for me. Not being able to boot and log in is kind of a big deal. :P
Is there anything I can do or try? I want to keep the OS's I run all the same, so if Fedora 12 bombs out on this laptop, it has no chance on the other servers I plan to run at work. So far openSuSE is running without a hitch but I'd really like to give Fedora 12 a chance....
View 2 Replies
View Related
Jun 8, 2010
This is a bit complicated to discribe because I don't know the cause, but this problem has been happening for some time (over a few years and generations of kernals), with different Gnome distributions, including Ubuntu (and family) and Fedora. When using Gnome (and only Gnome), I frequently see the screen dim. At the same time, all processes will be locked up. This may happen for a second or two, or it make require a reboot. The mouse can usually move and the underlying program GUIs are still visible, it's just that one or more of the GUIs will be dimmed. This is usually most noticeable with a browser, but that may just be a coincidence.
View 11 Replies
View Related
Feb 2, 2010
I am in Fedora 12KDE and just tried "sudo yum update" from terminal because the graphical updater isn't working. I got a list of files to be updated, but in the things it wants to install as dependencies it lists "gnome-menus" and "gnome-packagekit". If I am in the KDE version of Fedora, why am I getting things that require gnome and how do I figure out which things those are to uninstall them? Did I use the wrong command for the update?
View 3 Replies
View Related
Oct 18, 2009
I seem unable to get an nvidia driver working properly after upgrading to the latest kernel with Fedora 11.Here is my laptop and its specs: http://h10025.www1.hp.com/ewfrf/wc/d...reg_R1002_USEN[URL]I've tried both the kmod and akmod unsuccessfully. Everytime it gives me a black screen on boot, I can fix the problem by popping in the LiveCD, and changing the xorg.conf file back to the backup.Here are the errors/warnings from my boot.log file:
Code:
WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/.
Checking for module nvidia.ko: [60G[[0;31mFAILED[0;39m]
[code].....
View 6 Replies
View Related
Mar 12, 2009
Tried the DVD install for 10. Install went fine other than it take for freakin ever, but after an 1 hour install, the update wanted to install 1675 or so updates. I let those updates install. 5 hours later the updates were done. Rebooted and now it freezes at a blank screen right after the 3 scrolling bars. System is older AMD 3000+, 1 GIG RAM with NVidia 5700 video card.
I did try and search some. But the only thing I could find was something about editing my grub file for a scan=sync setting (the information was basically gibberish to me. No clue what it was talking about or how I would edit a file on a system that won't boot). I tried to recover mode off the live CD. It had some options that said you could type Linux command line arguments, but whenever it got to the sysimage it says Linux isn't a command.
View 2 Replies
View Related
Nov 26, 2009
It appears that I have really messed up my machine. I was trying to get matlab working on FC 11 and I ran into libc.so.6 issues, so I put an older file libc.2.3.1.so in /lib/tls/ directory and created a symbolic link libc.so.6 to see if the application would work. Unfortunately at the same time the system did some updates and the system hung, so I ended up rebooting, but now it gets stuck at boot screen (after grub) with a kernel panic - not syncing: attempted to kill init.I just need a way to get to the directror /lib/tls and delete the link and the older .so file I threw in there. How do I get this accomplished. I cannot get even to a shell from the boot screen.
View 3 Replies
View Related
Sep 21, 2010
I've just installed fc 13 on my laptop. It's got windows and mepis linux on here also. the installer for fc only found windows and I was wondering if there's a way to modify the graphical grub screen to contain mepis linux or if i have to disable it and use a standard text screen for grub.
View 1 Replies
View Related
Oct 14, 2010
I just installed the Catalyst drivers under FC13 (package xorg-x11-drv-catalyst-10.9-1.fc13.i686 ) and I am superhappy, as it worked straight out of the box.
The only little annoying thing is that I lost the Plymouth graphical boot, which is now substituted with the text scrollbar...
I edited grub.conf and added
Code:
Somewhere I read that that attribute is now obsolete and has to be changed to
Code:
But that did not work either.
View 4 Replies
View Related
Oct 2, 2010
I have an Emachine that my uncle gave me and I thought that Ubuntu would find a nice home in the cozy case and well.....
I have a Emachine el1200-05w AMD Athlon 64 2650e / 1.6 GHz NVIDIA GeForce 6150 SE 2.0 GB mem. and 160GB HDD
I had to fight to get it to install kept freezing and stopping. I finally got it installed. It runs fine and is fast. I like it alot and then after about 5 to 10 min. The screen locks up or will distort in multicolor stripes across the screen. I cant figure out whats going on!
I did just notice that the specs say it's a 64bit possessor and I'm running the 32bit ubuntu will that make a difference?
View 6 Replies
View Related
Sep 24, 2009
My Fedora11 hangs on boot. I have no idea where or why it is hanging so I want to disable graphical boot. I booted the installation media, the root file system mounted on /mnt, seted /mnt as my root with the chroot command and edited /etc/inittab, then unmounted and rebooted but it didn't help me. Is it possible to run gconf-editor under live cd and disable splash? How can I boot Fedora in single mode? For example use the following steps I'll be able to boot RHEL into single-user mode:
At the GRUB splash screen at boot time, press any key to enter the GRUB interactive menu.
Select Red Hat Enterprise Linux with the version of the kernel that you wish to boot and type a to append the line.
Go to the end of the line and type single as a separate word (press the Spacebar and then type single ). Press Enter to exit edit mode.
View 5 Replies
View Related
Jan 24, 2010
Recently, I accidentally erased plymouth from my Fedora 12 system.I now have reinstalled plymouth.But I still do not have my graphical boot. How do I switch back to graphical boot?
View 2 Replies
View Related
Jun 2, 2010
I've put a fresh install of Fedora 13 x86_64 on my new server and I have it automatically log in to the gnome desktop so I can control it via VNC. However this only happens when there is a monitor physically connected when the computer boots. If there is no monitor present at boot time, there is no graphical session started, however I want it to start whether or not a monitor is present.
My hardware is a Zotac IONITX-G-E board (which has an Atom N330 and a NVidia ion chipset of some description). I'm using the Fedora default graphics driver (nouveau). Why doesn't it start a graphical session with no monitor, and is there any way to get Fedora to start one whether or not there is a monitor connected?
View 5 Replies
View Related
Sep 23, 2010
I have successfully installed the Nvidia driver on my FC13 system that is using an Nvidia NV44 (Ge 6200) card. It seems to be working as I see the nvidia driver when I do a lsmod | grep nvidia and the glxgears program works as well as the nvidia-settings program.Basically, I did the following:
Code:
yum install kmod-nvidia-PAE
new-kernel-pkg --mkinitrd --dracut --update $(rpm -q --queryformat="%{version}-%{release}.%
[code]...
View 6 Replies
View Related
Mar 16, 2010
Just recently installed Fedora 12 (GNOME) on my Netbook, just trying to get the boot as fast as possible. So I was wondering how do I turn off the graphical boot? That should save a few seconds.
View 2 Replies
View Related
Oct 28, 2010
I have downloaded ubuntu 10.10 64bit and have also burned it to good disk at 4x speed. when i boot it from cd everything goes simple and fine till it comes to a mixed orange colour screen and then nothing goes further, it just halts there with this full blank screen. so i have to do a hard shutdown. then i tried wubi.it went good. after rebooting it asks for installation options. there are five of them. in the normal mode the same thing gets repeated again. but in safe graphics mode ubuntu gets installed but few errors are shown after installation. there is no graphical screen and only this text screen comes again and again.
My laptop specs are as follows:
View 4 Replies
View Related
Feb 7, 2011
I would like to run a command when the screen locks, and another when it unlocks. I work in a shared office space. When I leave my desk (and the screen locks) I would like the webcam motion capture software 'motion' to run, in order to record anyone who uses my computer when I'm gone. Likewise when I come back and unlock the screen I would like it to pause.
View 1 Replies
View Related
Mar 1, 2011
When Ubuntu loads on my laptop (micron gx3, pentium 4) it freezes on the install screen. Is there something about my hardware that might cause a problem? I looked @ the other micron GX3 forums and didn't see the same case
View 1 Replies
View Related
May 22, 2010
everytime I run "zypper up -t patch", I get the following:
Code:
Loading repository data...
Reading installed packages...
Resolving package dependencies...
[code]...
View 4 Replies
View Related
Aug 6, 2010
Recently, ive been having this problem with ubuntu in which while im watching a movie and thus not doing anything else, everything locks up except for the sound (if i attempt to move mouse doens't work) and then it goes into the login screen. Previously, ubuntu would fade away into the login screen.
So is there any way to prevent ubuntu from going to the login screen if the user is not moving the mouse? non-fading login screen?
edit: oh and i also have this sometimes occuring problem where i type my password to login, it logs in, and then it immediately goes back to login screen. A second login works. probably not relevant
View 2 Replies
View Related
Aug 28, 2010
I'm running 10.04 and when my screen locks I can't unlock it. I enter my password and it checks my password forever. This is a recent problem. I don't know what's causing it.
View 3 Replies
View Related
Nov 23, 2010
I am not sure exactly what is going on, but my ASUS UL30a (X32a) keeps locking up until I press a key, then it seems to resume for a while.
At first I thought it was just the mouse, but I noticed that the screen stops refreshing also. Hitting the space key (or any other key) brings the systme back to life (until it happens again).
It is a fresh install of Ubuntu 10.10, not much seems to be going on in the top list (compiz 1%, xorg 0.5%)
I am looking for ways to try and diagnose the problem (if not fix it )
View 9 Replies
View Related
Apr 14, 2015
I'm using SolydX, based on Debian Jessie. XScreensaver is installed and disabled, but it still locks my netbook screen after some minutes and suspend mode. Waking the netbook up brings XScreensaver login window. I'd like lightdm login window to appear instead.
View 3 Replies
View Related
Mar 2, 2011
I just installed 10.04.2 Desktop. Full install, reformatted all partitions. Hardware: Dell Optiplex GX200 with Dell 781p monitor Dell mouse and kybd.
All appeared to install well and as expected.
The computer has locked up 4 times, now. Whenever I attempt to use the mouse to drag a window to a different place on the desktop the monitor goes half black (bottom half of screen) and I loose the ability to use the mouse or keyboard to provide input. The only recourse is to shut it down hard and boot up again.
View 1 Replies
View Related
Feb 8, 2010
I've been using Ubuntu for about a year or so and have never had any problems installing it up until now.
I can boot from live CD for 9.10, but if at any point I attempt to install it to my hardrive, it either locks up or the screen goes black. Sometimes I'm able to start the installer, but the screen will go blank. The most progress I've been able to make on the install was up to 98% before it locked up, every other time I've gotten a blank screen or a lock up around 40-60%. After a hard reboot I get an error that reads "DISK BOOT FAILURE. INSERT SYSTEM DISK AND PRESS ENTER"
This problem doesn't only occur with 9.10, but with every other linux distro I've tried on it. My first attempt was with Ubuntu Studio, but I got similar errors. I've searched literally for hours and have found nary a solution that even comes close to solving my problem. using HP Pavilion a404x desktop
View 5 Replies
View Related
Jan 22, 2011
I just got a wireless dongle because in my house wired is not possible, but now I am getting problems. The dongle is a tp-link that turned out to be plug&play (unlike windows) and seems to work perfectly, except when the screen locks. I have tried to download overnight several times and it seems like a few minutes after the screensaver comes on or after I lock the screen, the connection is dropped. It works completely fine normally. So what changes when Ubuntu (its maverick with all updates) locks the screen? Also, when I log back in, I have to unplug the dongle and plug it back in to get it to connect again.
This is really REALLY annoying, enough to make me switch back to windows if I can only download while I'm looking at the screen.
View 4 Replies
View Related
Jun 29, 2010
I have a very strange problem since I turned to kubuntu 10.4. Often, after some heavy working, my laptop works very slowly and suddenly when loading something, it locks and white lines turns all over the screen, just like curtains. Linux jumps out of KDE and logs in automatically. That's very anoying since all my work is lost and it turns back to the previously saved session.
Also, often when I boot, the load screen is also mmissed up with those white lines. The only thing I can do then is to reboot.
I tried to re-install kubuntu (in first instance, i upgraded in kpackage, then i re-installed with formatting the root en swap partitions).
I don't know how to solve it. Only thing that seems reasonable now is to downgrade, since i didn't have this problem on 9.10 (fyi: I have a dell inspiron 1501 with ATI Xpress 1150 256MB HyperMemory video card, formerly i had problems to have good graphic drivers for it on previeous versions of kubuntu (some 3d games didn't work), maybe this has someting to do with it?)
View 3 Replies
View Related
Apr 30, 2011
I've updated my ubuntu from 10.10 ==> 11.04. Now I can't login using graphical inerface. System is loading but it stops right before I should see screen with login credentials. When I use ctrl+alt+del it's going to reboot properly, the same when i push the power button it's shutting down. System works fine in failsafex mode so I can assume there's a problem with xserver etc. Using Nvidia 9500GS.
View 7 Replies
View Related
