Ubuntu Installation :: 10.04 To 10.10 Update Damaged To Nvidia Vga Card?
Oct 9, 2010
10.04 to 10.10 update damaged to Nvidia vga card help please, I have a acer 5520 G notebook and vga card is Nvidia Geforce 8400 G i have used ubuntu 9.04 for one year without any problem with windows xp and many times i formatted and installed both operation systems later i downloaded 10.04 and used it without any problem then on 28.september.2010 i updated ubuntu 10.04 to 10.10 from internet then ubuntu suddenly frozen i could not soft reset it had to close notebook then i started windows xp it was same(frozen) then i formatted hard disc and intalled windows xp and ubuntu 9.04 without Nvidia driver now many spots(hundreds) on the screen both operation system if i install Nvidia drivers operation systems will frozen.
View 6 Replies
ADVERTISEMENT
Apr 3, 2011
I can't figure out how to install the nvidia drivers for my nvidia 8800 GT video card. I've followed some other posts and all the posts seemed either incomplete, or led me down a path of which eventually broke my installation, that I needed to reinstall the entire ubuntu system.Again, it may not have been broken, i just didnt know how to get back in to the gui version of ubuntu, the instructions took me to the console terminal
1.) I've installed the ubuntu 10.10 64bit for i386 in an oracle virtualBox..
2.) downloaded from nvidia.com "NVIDIA-Linux-x86_64-260.19.44.run"
3.) Stuck don't know what to do.
View 4 Replies
View Related
Jun 19, 2011
I have a problem with starting ubuntu 10.10, I changed my graphics card from an ATI card to a Nivida card a week or so ago (Machine has dual boot). I've sort out the windows install, but cant get into ubuntu to update the drivers. It boots as far as console but just leaves me with the text screen. How do I update the drivers from there or get a basic console screen to come up so I can update?
View 1 Replies
View Related
Oct 13, 2015
I pulled the MicroSD card out of a non-working Android phone to backup its data onto my Debian system. My Desktop is Cinnamon and I was simply using copy/past from within Nemo. The files began to be transferred but during the transaction a dialog popped up declaring an input/output error. From that point on the card was not readable on my system.
I initially plugged the card into the computer via a USB card reader. I later tried using an SD card adapter and plugging it in my printer's SD slot. Still the system would not recognize the card. I also tried plugging the card into another Android phone. The phone could not read the card and attaching the phone to a computer did not recognize the card either. I then logged into a Windows 7 system but it could not detect it. The partition manager always showed the USB drive or SD slot as "device not connected". The last thing I tried was putting the card, with the SD adapter, in my camcorder. The camcorder prompted to format but failed to do so.
I would like to recover the pictures and videos off of the card but I am afraid that there may have been hardware failure on the card's controller. I have been searching around most of the day trying to find a solution but nothing I have tried has rendered it detectable on any system. If it is controller failure, need repairing or recovering data from physically damaged SD cards?
View 2 Replies
View Related
Apr 10, 2010
A section of the hard drive on my laptop is damaged but the laptop has genearlly been running fine as it seems to very rarely touch that section (once every few months). However, when installing some updates the computer has hit that section which means it becomes unresponsive and makes a nasty clunking sound every 10s or so. Because of this I've had to abort the update but now whenever I try to run 'dpkg --configure -a' to sort out the problem caused by the interrupted update I get the same freezing up and clunking. The message that appears when I run the command is adding extension /usr/lib/openoffice/basis3.0/program/mailmerge.py... and then it freezes.
View 2 Replies
View Related
Sep 1, 2011
Installed Ubuntu 11.04 but i don't know how to install my nvidia 7200 gs graphics card. in the previous versions (ubuntu 9.10) it installed very easly.. But in Natty 11.04, while i am try to install my driver it fails 2 times and after installation (reboot) ubuntu freezes and not working So reinstalled ubuntu 11.04.
View 3 Replies
View Related
Jan 8, 2010
I just bought a new pc. It has plenty of hard drive space and ram with a 2.6GHz processor. I'm trying to run a dual-boot with Windows 7 and Linuxmint. I need some help as to how I go about installing my video driver. I have tried combinations of the following: -clicking on the taskbar icon that says "restricted drivers are available" and enabling the drivers -going to Software Manager/Drivers and choosing to install "NVidia 3D Drivers"
My efforts so far have only resulted in the following behavior: The screen changes from color into black-and-white and becomes unresponsive except to close it out The screen freezes up completely forcing me open up a terminal to kill the offending process (which turns out to be firefox)
The next thing I would like to try is to just go to the Nvidia website and downloading and installing the driver from there. It's a BIN file with a "run" extension. So I entered the command "chmod +x NVIDIA-Linux-x86-190.53-pkg1.run" followed by the command "./NVIDIA-Linux-x86-190.53-pkg1.run". But I get an error that says the following:
ERROR: You appear to be running an X server; please exit X before installing. WHAT IS AN X SERVER? HOW DO I CLOSE IT?? I've got nothing unusual open. Maybe a web page. I've tried closing out of everything except the terminal and I still get the same message.
View 2 Replies
View Related
Aug 10, 2009
I installed F11, before today, I used Ubuntu for a long time. my graphic card is nvs140m of nvidia. I download the card driver from [URL]. the vision of the driver is NVIDIA-Linux-x86-185.18.29-pkg1.run. before I can install the driver, I must close the X-server. so, please tell me how to close the X-server.
View 4 Replies
View Related
May 3, 2010
I have an old video card, Nvidia XFX 7800GT, which is now beginning to fail and I need to upgrade. I am not huge a gamer but I do play/buy games on regular basis. Right now I'm playing Eternal Lands on the Linux side. Looking to spend $100-$150 on a new card.I have a Core2Duo Wolfdale 3.0, with 2ghz ram and run Lucid 32bit. Also run windows Vista64Ultimate on dual boot (rarely).
I would love to buy a new ATI 5770 or 5830, ATI budget cards seem to be much better for the buck over budget Nvidia cards, but I'm concerned with ATI drivers and long term with Ubuntu.On the Nvidia side I'm considering the GTS 250. The only advantage I can find is lower power consumption with Nvidia and Ubuntu has always preferred Nvidia over ATI, as far as working drivers go.As Far as Ubuntu and Lucid is concerned, which way is best, ATI or Nvidia? Has anything changed with ATI support, that could make theor cards more compatible now and in the future?
View 9 Replies
View Related
Oct 11, 2010
I'm trying to setup a dual boot of windows 7 x64 and Ubuntu 10.10 i386. Before I got windows 7 and the new graphics card it ran 9.10 perfectly. If I take the card out (Nvidia 8800 Ultra), it will install fine but when I put the card back in, it crashes. It appears that it just doesn't like the card.
View 3 Replies
View Related
Mar 23, 2011
This is to request the communities assistance with the following: As the title suggests, I am attempting to install 10.04.2 LTS on a PC equipped with an ASUS M2NPV-VM mobo and integral NVidia GeForce 6150 chipset/card and AMD dual processors.
Result: While the CD with the installation software loads, the splash screen comes up distorted and is displayed as several black and white horizontal bars. I have tried this with low end monitors with a VGA input with the same results. It appears to me as if though the video driver on the installation CD is not suitable for the mobo's chipset, but I may be wrong.
View 5 Replies
View Related
Nov 30, 2010
Only about 1.5 weeks into Linux guys so bear with me. I'm trying to uninstall the Nouveau driver and install NVIDIA-Linux-x86-71.86.14-pkg1.run for my old Nvidia TNT2 card. Following these directions I run into a problem in the first step. When I execute the Ctrl+Alt+F1 command and get:
Ubuntu 10.10 splat-desktop tty1 splat-desktop login: if I enter splat which I believe is my username and the correct p/w I get an incorrect login response.
View 3 Replies
View Related
Dec 7, 2008
I just installed Fedora 10 on a brand new machine with an on-board nvidia MCP73 ethernet card. Now, when I initially boot up the box after installation, the card comes up and gets a DHCP address just fine. When I go to edit the network settings (change to static) the NIC dies. I don't think I have the proper driver. Does anyone know a) where to get the driver and b) how I can install it?
[code]...
View 3 Replies
View Related
Dec 11, 2008
I took the following path: Yast - Hardware - Graphics Card and Monitor; and it gave me message "the configuration is Framebuffer based and your system does not support changes for resolution and/or color settings". I verified my system's(dual boot system) graphics card using windows OS and it showed NVIDIA Quadro FX 570, but in X11 configuration it shows "Card: VESA Framebuffer Graphics" and the Properties tab is not active.
View 1 Replies
View Related
Feb 11, 2010
I installed Karmic and the resolution was lower than I expected. I went to Admin and Drivers and the system stated I needed to activate the Nvidia driver. I did this and the system asked for a reboot.Now after Grub I get a black screen. I can hear things going on in the background and can even guess when to input my password, but all I see is a black screen.
View 1 Replies
View Related
Apr 28, 2011
Tonight I upgraded to 11.04. Once I had finished the upgrade, I restarted my computer as it told me too. When I got past the ubuntu 11.04 (purple background orange dots), it simply went to the terminal and asked me to log in. I tried to restart the X server with "sudo service gdm restart" but no display popped up. I happened to have a few NVIDIA drivers in my downloads file also so I gave these a try, but the "install script" failed.
After all this I booted Ubuntu in graphic failsafe mode. I then decided to see what would happen if I removed the proprietary driver. Upon doing this and rebooting my Ubuntu booted into graphical mode "yay!".So without the Nvidia drivers I can finally see something other than terminal, but, I need those NVIDIA drivers for my work. So what can I do? I have tried installing the new NVIDIA linux drivers from the NVIDIA website,and have tried Installing the recommended driver via "additional drivers", but both have resulted in my being stuck in terminal.
View 9 Replies
View Related
Aug 8, 2010
The freeze's on my machine only appears when i monitor the temperature of
the gpu. Normally i use gkrellm to monitor temperatures including the gpu temperature. When i stop gkrellm there a no more freeze's on my system. Then i started nvdock which also monitor the gpu temperature and the freeze's are back. Stopping nvdock make the system working normally. I have done a few reboots now, warm and also cold starts und everything works normal.
System data: AMD P2 X4 940, Nvidia GTS 250, openSUSE 11.3, Nvidiadriver 256.44,
Gigabyte Mainboard GA-MA78G-DS3H rev.2,8GB RAM, KDE 4.4.95,
View 6 Replies
View Related
May 3, 2010
Using the video card Nvidia 7800GT on an AMD4200, MB T6100, I am unable to install from the iso, as progression is halted by a video mode that is unviewable. (black and white rows). I can get to the "f6" menu, however once I attempt an install it fails. My main goal is to install Mythbuntu, however the problem seems to be with the Unbuntu install drivers.This post worked to get around this on version 6.10, however these instructions no longer work. http://ubuntuforums.org/showthread.php?t=379807
Is there any way to use the newest Nvidia drivers that should work from a new install CD? I do not see a command line option, which would seem to allow me to install and update and setup the distro, THEN add my drivers before I run xconf.
View 6 Replies
View Related
Jun 18, 2009
I have a Geforce 9300 GS installed in my machine I am using 64 bit Gnome with a 64 bit system I downloaded this: Now my video won't show any effects and the Nvidia card won't work? This doesn't make any sense. Frustration to the max. I should have stayed with Fedora 10 at least it worked with downloadable drivers.
View 14 Replies
View Related
Jan 7, 2011
I am new to Suse Linux. So please excuse me for this "funny" query. have read the threads: Configuring graphics cards in openSUSE 11.3
From here I went to this page: SDB:Configuring graphics cards - openSUSE Its mentioned on this page that: Upon installing openSUSE, the X system's automatic configuration may have failed to properly configure the graphics correctly. Typically this results in either a black screen upon reboot, or the wrong resolution being displayed on the monitor.
I have none of these problems. But after searching for inability of desktop effects to become activated, I found that nVIDIA graphic card drivers are must for these effects. After clicking "My computer" icon on desktop, I found Display Info as following:
Vendor: nVidia Corporation
Model: G98 [GeForce 8400 GS]
2D driver: nouveau
3D driver: nouveau Gallium (7.8.2)
Can anyone tell me 'Is nouveau an alternative for nVIDIA'? Is this the reason for no wrong resolution or black screen upon boot. That means my computer graphics are working correctly. Then why does Desktop Effects are not getting enabled.
After searching for Kaffeine media player extra codecs to play media files, I incidentally found the following options: I opened Yast Control Center @ linux-o26a Software> Add on Products > installed Add-On Products > Community Repositories > clicking Next, this opened a window with "List of Online repositories" where there is an option of "NVIDIA Repository". If I install it, will it enable the "Desktop effects"
View 9 Replies
View Related
Feb 27, 2011
I use DOS and WIndows XP for engineering and CAD work, and HAD a WORKING dual boot system, with NTLDR booting both systems. Now, after my attempts to add Fedora 14, I don't have ANY working OS. I don't know much of anything about Linux. I just wanted to add it to my to machine for safe and reliable web browsing and email. I know it can be used for much more, but that was just the initial goal.
I've watched a friend create a triple boot with Linux a couple years ago, and he wrote the procedure up for me. (I've seen the same procedure posted many places online.) It involves installing linux to a clean formatted XT3 OR XT4 partition and GRUB to the root of the same partition. Then you "DD" the first 512 bytes of the partition to a file "bootsect.lnx" in the primary partition. And finally, you reference "bootsect.lnx" in the Windows BOOT.INI.
I repartitioned the drive for Linux, using Partition Commander 11. It's structured like this. (sizes are my best recollection)
I booted from a Fedora 14 LIVE CD. Ran GPARTED from a terminal window. It identified the 100GB XT 4 partition as SDA7 and the 2GB Linux swap as SDA8. I figured this was the only place Fedora would go. So I started the installer.
It didn't tell me where it was going to install, but alerted me that I had FAT, FAT32 and NTFS partitions. I was given several choices and selected the option that would not touch those partitions. The installation proceeded, and I was never given the chance to tell the installer where to install GRUB. I had every reason to expect that it installed to the XT4 partition. On reboot, I now have a command line, "GRUB:" No DOS, WINDOWS or Linux.
Is there anyway to restore my DOS and WIndows booting under NT Loader? Or is it gone for good? I may want Linux, but I can't live without the DOS and WIndows for my work. If it IS possible to fix this can we do that BEFORE we get back to installing Linux?
View 14 Replies
View Related
May 5, 2010
I've been running Lucid since it dropped. Decided to upgrade my NVIDIA 6600gt graphics card to the newest driver I found at the website. Installation went flawless. But after reboot, I got this:
Ubuntu is running in low-graphics mode
The following error was encountered. You may need to update your configuration to solve this.
(EE) May 05 12:24:17 NVIDIA(0): Failed to initialize the NVIDIA
kernel module. Please see the
(EE) May 05 12:24:17 NVIDiA(0): system's kernel log for
[Code]....
View 9 Replies
View Related
Sep 16, 2010
I have been waiting on installing ubuntu on my mid 2010 MBP 15' for a while now. I was wondering if the dynamic GPU switching was supported yet. Does Ubuntu recognize the intel card and can I use it over the nVidia card?
View 1 Replies
View Related
Jun 14, 2010
I had Ubuntu working perfectly until I installed updates for the proprietary Nvidia drivers.Now Ubuntu freezes at the Ubuntu loading screen. Im using Ubuntu 10.04 64bit.I used to know how to access the terminal at bootup but I no longer remember.
View 5 Replies
View Related
Feb 19, 2010
im having problems with update to new kernels..here is the error info: error is: Multiple packages exist that are not compatible with each other. This is usually due to mixing packages from different software origins. ERROR with rpm_check_debug vs depsolve:
kernel-uname-r = 2.6.30.5-43.fc11.x86_64 is needed by kmod-nvidia-2.6.30.5-43.fc11.x86_64-185.18.36-1.fc11.1.x86_64
kernel-uname-r = 2.6.30.8-64.fc11.x86_64 is needed by kmod-nvidia-2.6.30.8-64.fc11.x86_64-185.18.36-1.fc11.2.x86_64
kernel-uname-r = 2.6.30.9-96.fc11.x86_64 is needed by kmod-nvidia-2.6.30.9-96.fc11.x86_64-190.42-
[Code]....
View 6 Replies
View Related
Oct 30, 2010
a little while ago the file from nv stopped being able to run.. I cant update the driver and now always get this error
4: warning: comparison between signed and unsigned integer expressions
/tmp/selfgz2718/NVIDIA-Linux-x86_64-260.19.12/kernel/nv.c: In function �nv
_kern_read_registry�:
[code]....
View 2 Replies
View Related
Oct 17, 2010
While installation of openSUSE on machine already having winXP and Ubuntu, I chose "Edit partition setup", I also chose GRUB: change locaiton to "MBR" enabled installation summary was something like this, shrinking sda1 to 13.02 and sda5 to 12.3 Gb, swap partition to sda3 (old linux), root partition to sda6(old linux), then began installation, and after sometime, while shrinking done with sda5, when started with sda1, it showed the following error- Failure occured during following action: Shrinking partition /dev/sda1 to 13.03 GB (progress bar might not move) System error code was: -3027. Now, currenly, i am not able to have my winXp back, during booting it shows: error: no such partition grub rescue>_
View 7 Replies
View Related
Jan 6, 2010
i'm going to change my old Nvidia Graphic card wich runs very well in Ubuntu by an ATI HD Radeon 4770.Will Ubuntu recognize it when i plug it and start the computer, will Ubuntu reconfigure by itself?... or i'm going to have problems like not to be able to start the X server and only be able to enter to the console.Need i to remove the nvidia graphics driver before to plug in the new card?I have downloaded a program called Envy, which is supposed to reconfigure ubuntu properly... it's ok?Finllay, can i backup the curent configuration so that if the new card is not well installed i can return to the old without problems?
View 1 Replies
View Related
Jul 7, 2011
I was trying to update the new nvidia drivers since they dont seem to work in the newer kernel, or to try to fix it but now when i run yum update I get a screen like this:
Downloading Packages:
Running rpm_check_debug
ERROR with rpm_check_debug vs depsolve:
kernel-uname-r = 2.6.38.3-18.fc15.i686.PAE is needed by (installed) kmod-nvidia-2.6.38.3-18.fc15.i686.PAE-1:270.41.06-1.fc15.i686
[Code]...
View 4 Replies
View Related
Aug 10, 2011
I've been running a dual-boot ubuntu 11.04 64-bit and windows 7 64-bit for a while now, and recently got a new computer. I moved the hard drives to the new computer (one had both os's on it, the other was just a storage drive) and windows 7 would not boot, so I reinstalled it. I used a live cd to repair grub using boot repair /Boot-Repair) and everything looked to be going swell But when I tried to boot I got "invalid or damaged bootable partition" instead of a grub menu. so I went back and, copying and pasting the commands the program gave me, I manually removed and reinstalled grub on my ubuntu partition. same error. so, I backed up all my documents onto a third drive, wiped everything out, and started again. I installed win7 on one drive, and then when that was done, I installed ubuntu on the other. lo and behold when I tried to boot I got the same error message, and now I can't even boot from my windows drive. The ubuntu drive is fairly new and according to disk utility has no errors. Is this some problem with grub or what?
View 5 Replies
View Related
