Installation :: Can't Get MCP73 NVidia Ethernet Card To Work In Fedora 10

Dec 7, 2008

I just installed Fedora 10 on a brand new machine with an on-board nvidia MCP73 ethernet card. Now, when I initially boot up the box after installation, the card comes up and gets a DHCP address just fine. When I go to edit the network settings (change to static) the NIC dies. I don't think I have the proper driver. Does anyone know a) where to get the driver and b) how I can install it?

[code]...

View 3 Replies


ADVERTISEMENT

Fedora Installation :: Video Won't Show Any Effects And The Nvidia Card Won't Work?

Jun 18, 2009

I have a Geforce 9300 GS installed in my machine I am using 64 bit Gnome with a 64 bit system I downloaded this: Now my video won't show any effects and the Nvidia card won't work? This doesn't make any sense. Frustration to the max. I should have stayed with Fedora 10 at least it worked with downloadable drivers.

View 14 Replies View Related

Debian Installation :: Can't Get Pci Express Ethernet Card To Work

Dec 22, 2010

I have an HP Pavillion Elite HPE computer I just got for a server. It has an internal gigabyte on the mother board and I put in one pci express trendnet teg-ectx eternet card in before installing. It is using the realtek 8169 chip. I had the local network on this card and the pubic static ip on the built in ethernet port eth0. After the intstall of debian 5.07 32 bit I couldn't get the eth0 pubic access to work. I can't get into the server with sftp or ssh and openssh has been installed and I can get into it locally on the local network.

I then installed a second ethernet card the same as the local network card. Now the pubic is on the which is eth1 and the local is eth2. I can ping out to [URL] but I can't get into the server on the eth1 using ssh and I have a iptables firewall and I turned it off and I stll can't get in. I am thinking that the eth1 card I added after the install doesn't have the driver or something. nothing is hooked up to eth0 right now.

[code]....

View 3 Replies View Related

Fedora Hardware :: Does Noveau Work With A Nvidia NVA8 Card

Jan 16, 2010

Does the Noveau video driver support an Nvidia NVA8 video card? If so, does it require a special xorg.conf to make it work?

On my FC11 64 bit system, I successfully use a card that is reported in /var/log/gdm as
(--) NOUVEAU(0): Chipset: "NVIDIA NV4B"

but I would prefer to use a "MSI N210 MD512H" card that is reported as
(--) NOUVEAU(0): Chipset: "NVIDIA NVA8"

However, on boot up, he NVA8 card produces a blank screen when the login screen should appear. (The graphical boot screen is visible up to that point). The Xorg.0.log doesn't have anything that I would interpret as a "fatal" error. CTRL-ALT-F2 gives me a usable console. If I do "startx" in the console, I get the message that the Xserver is already running.

View 2 Replies View Related

General :: NVidia Nforce Ethernet Card Not Detected In RHEL 5

Jun 8, 2010

I use an nVidia nforce MCP73 ethernet card on Red Hat Enterprise Linux. It is not getting detected and hence I'm unable to configure my network.

View 14 Replies View Related

CentOS 5 Networking :: NVidia Corporation MCP79 Ethernet Card Not Detected In MAC Mini?

Feb 26, 2010

I have installed trixbox 2.8.0.3 in Intel MAC mini PC, installation completed successfully. After reboot network card was not detected.

My MAC mini PC comes with nVidia Corporation MCP79 Ethernet card. how to enable Ethernet card with out affecting the tribox. trixbox-2.8.0.3 version comes with Cent OS 5.4. [Moderator edit: s/deducted/detected/]

View 5 Replies View Related

Networking :: Configure My Ethernet Card To Work?

Sep 2, 2010

Tell me how to configure my Ethernet card to work. My pc only works wirelessly. I don't know what kind of Ethernet card is installed. I have Ubuntu 10.4 on a dell pc 1ghz, 20ghd, 512mb.

View 2 Replies View Related

Networking :: VIA Rhine Ethernet Card Under Slackware 13.1 Won't Work

Mar 2, 2011

I have had some problems with a SATA DVD drive under installation of Slackware 12.2, [URL] So i tried 13.1 instead. But now the ethernet card is not working Its a VIA Rhine card, and it was recognized just fine under 12.2 The following command did nothing: Code: ifconfig eth0 up I am getting no errors. I have also tried using netconfig, no luck there either.

View 3 Replies View Related

Fedora Networking :: 14 Can't Connect To SpeedTouch 585 - Either Wireless Broadcom Card Or The Wired Ethernet Card

Dec 4, 2010

Just installed Fedora 14 from the Live CD i686 on my Dell Inspiron 1521. I can't connect to the SpeedTouch 585 on either wireless broadcom card or the wired Ethernet card.

I can connect to it from the same Laptop on the Vista which is on dual boot on the same laptop.

Further confusing is that I ran Fedora 14 and connected to another SpeedTouch today.

Already checked the Channel on the wireless nic and it's on the same one as the SpeedTouch.

View 6 Replies View Related

Fedora Installation :: Nvidia Card Driver For T61?

Aug 10, 2009

I installed F11, before today, I used Ubuntu for a long time. my graphic card is nvs140m of nvidia. I download the card driver from [URL]. the vision of the driver is NVIDIA-Linux-x86-185.18.29-pkg1.run. before I can install the driver, I must close the X-server. so, please tell me how to close the X-server.

View 4 Replies View Related

Ubuntu Networking :: Can't Get DGE-528T Ethernet Card To Work On Karmic Amd64

Jun 11, 2010

By upgrading to latest kernel(2.6.31-22) the card was recognized but it still doesn't quite work. I'm not that good at this but I'll paste some stuff that I think is related to solving a problem such as this.

[code]...

View 1 Replies View Related

Ubuntu Networking :: Dell WLAN Card - Ethernet Port Does Work

Jul 28, 2010

I have a Dell WLAN 1397 Half Minicard, 802.11 b/g card in my laptop, and I can't seem to get ubuntu to work with it. I tried this method:

1. Synaptic Pack Manager
2. Check "Install from Boot Disc"
3. Reload
4. Install and apply bcmwl-kernel-source
5. Reboot

This didn't work for me, so I tried entering sudo apt-get install bcmwl-kernel-source and that also didn't work. Another thing I tried is formatting my Ubuntu partition and reinstalling, and retrying both of those methods. The ethernet port does work, however.

View 3 Replies View Related

Ubuntu :: Having An OSX Snow Leopard Dual Boot Setup - Ethernet Card Does Not Work

Sep 19, 2010

I booted ubuntu and the included drivers worked beautifully for my Atheros AR8131 PCI Ethernet card on my laptop. I have an OSX Snow Leopard dual boot setup and my Ethernet card does not work. I was wondering if, because OSX is loosely linux based, the network drivers could somehow be loaded into my Snow Leopard install.

View 1 Replies View Related

Ubuntu Installation :: How To Install Nvidia Drivers For Nvidia 8800 GT Video Card

Apr 3, 2011

I can't figure out how to install the nvidia drivers for my nvidia 8800 GT video card. I've followed some other posts and all the posts seemed either incomplete, or led me down a path of which eventually broke my installation, that I needed to reinstall the entire ubuntu system.Again, it may not have been broken, i just didnt know how to get back in to the gui version of ubuntu, the instructions took me to the console terminal

1.) I've installed the ubuntu 10.10 64bit for i386 in an oracle virtualBox..

2.) downloaded from nvidia.com "NVIDIA-Linux-x86_64-260.19.44.run"

3.) Stuck don't know what to do.

View 4 Replies View Related

Fedora Installation :: Nvidia Doesn't Work Under 10 64 Bit OS

Jun 20, 2009

Nvidia either works or it doesn't work under Fedora 10 64 bit OS. I have re-installed Fedora 10 64 bit and Fedora 11 64 bit 10 times each and it's getting real old. I keep erasing my system because Nvidia doesn't want to work. Leighs post does no good on this issue and neither does anyone else's or else it would work.

View 2 Replies View Related

Fedora Installation :: F11: Akmod-nvidia Doesn't Work

Jun 14, 2009

I have:

AMD Phenom 9650 Quad-Core Processor
nVidia GeForce 9500 GT graphics card
dual monitors

I installed F11 from the DVD iso. The nouveau driver seemed to work and I could get both monitors working with xrandr.

Then I tried to install the nvidia drivers. I installed akmod-nvidia.

They didn't work. I got this in my /var/log/Xorg.0.log:

Quote:

(II) LoadModule: "nvidia"
(II) Loading /usr/lib64/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0

[Code].....

View 4 Replies View Related

Debian Multimedia :: Getting Two Monitors To Work With 1 Nvidia Card?

Sep 4, 2010

I'd be grateful for any suggestions to get a second TV/Monitor to work in addition to the desktop monitor for a PC which runs Lenny. The first monitor is a small TFTLCD 15". Works perfectly with a GEForce FX 5200 nvidia graphic card and uses the 173.14.09 driver. Having obtained an SVGA cable, I connected the card to a rather larger 32" LCD Panasonic TX-L32S10B TV to enable some armchair viewing of internet etc for my parents. The Panasonic TV or monitor shows all the boot messages but the graphical server fails to start. I know that both screens work, either alternatively or simultaneously, having tested with a Puppy live CD.
However, running

nvidia-xconfig --twinview results in an incorrect screen resolution for the 15" TFT Monitor; Gnome Screen Resolution Preferences gives a rather surprising fixed setting of 2048x786/50Hz when the maximum should be 1024x768. The resulting xorg.conf file is:

cat /etc/X11/xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 1.0  (buildd@ninsei)  Fri Sep  5 22:23:08 UTC 2008
Section "ServerLayout"
Identifier     "Layout0"
Screen      0  "Screen0" 0 0

[Code]...

View 2 Replies View Related

Fedora Installation :: Software Update - Fedora (2.6.34.6-47.fc13.x86_64) - Nvidia Driver Doesn't Work

Sep 1, 2010

Fedora (2.6.34.6-47.fc13.x86_64) I installed that update, during the installation process it said that it had to remove three packages, one of them was kmod nvidia for the old kernel (Fedora (2.6.33.8-149.fc13.x86_64))After the update finished installing the new kernel, I restarted the system and Nvidia did not load. (I assume because Update manager removed the old nvidia? But I also assumed that a new version would be installed automatically?)I received the following Boot messages:

Code:

Entering non-interactive startup
Starting monitoring for VG vg_user1: 3 logical volume(s) in volume group "vg_user1" monitored

[code]....

I'm confused, if Update Manager removed kmod nvidia, then why does yum say it is installed? And why doesn't the new kernel update work with that version? Or should I install a driver version for that particular kernel? I've read while searching that I need to install a kmod-nvidia for that particual kernel version and that I should login to my previous kernel until that happens, is that the problem I'm having?

Why don't rpmfusion and fedoraproject release the kmod-nvidia and kernel updates at the same time to avoid problems such as this? Does anyone know how long does it usually take for rpmfusion to release the new kmod-nvidia driver for the latest kernel?

View 5 Replies View Related

Ubuntu :: Share Internet From 1st Ethernet AND To 2nd Ethernet And Wifi Card?

Feb 8, 2011

I am basically wanting to use my Ubuntu 10.10 computer as a router. Note: Before you say just get a router please note that I am poor/cheap. I have two ethernet connections and one wireless connection on my netbook. I want to share the internet connection that is going into one of the ethernet cards through the other ethernet card and the wireless card.

DSL-->1sr Eth --> 2nd Eth (currently works)
DSL-->1sr Eth --> Wireless Card (Adhoc) <--(connects with limited connectivity AKA no internet)

The 2nd Ethernet card already has working internet, but when I connect to the Wireless card (through an Adhoc network), it cannot get an IP (I believe).

View 2 Replies View Related

Ubuntu :: Getting The Audio To Work Through The Hdmi Out To Tv Using An Nvidia Ion Graphics/sound Card?

Mar 10, 2010

I am a new Ubuntu user and am having trouble getting the audio to work through the hdmi out to my tv using an Nvidia Ion graphics/sound card.

As far as I can make out Ubuntu recognises the sound card l but i cant get any sound out of it and don't know to go about altering anything.

View 3 Replies View Related

Ubuntu Multimedia :: Get Nvidia Card To Work On Dell With Integrated Graphics?

May 25, 2010

I have a PCI graphics card, Nvidia Geforce FX 5500, but can't get it to work. I have 10.04 installed on a Dell Dimension 3000, P4, 1Gb RAM, integrated graphics. I installed 10.04 without the card in the machine, then shut down and plugged the card in and booted it up again (BIOS setting is 'onboard' for integrated graphics, 8Mb; only other option is 'auto'). Checking the hardware drivers I can see the recommended Nvidia drivers (v173, not yet activated) and lspci gives me the integrated as well as the Nvidia listing:

01:02.0 VGA compatible controller: Nvidia Corporation NV34 [GeForce FX 5500] (rev a1)
00:02.0 VGA compatible controller: Intel Corporation 8286G Integrated Graphics Controller (rev 02)

So far so good, but that's where it ends. Changing the BIOS setting to 'auto' turns the screen off on reboot, both for the monitor connected to the VGA port of the Nvidia card and for the monitor connected to the VGA port of the motherboard. I have to shutdown, take the card out and set the BIOS back to 'onboard' to be able to boot again (and shutdown, plug the card back in and boot up again to get back to where I was).

Activating the recommended hardware driver and rebooting (still with BIOS set to onboard) gives a blank screen (screen is still on and there may have been a flash of the purple screen with the ubuntu logo); nothing else happens no matter how long I wait. Rebooting doesn't help, it turns off the screen; same result for booting in recovery mode. I can get to the GRUB bootloader and when I replace 'quiet splash' with 'nomodeset' I manage to boot again with the monitor connected to the VGA port of the motherboard, but am not anywhere closer to getting my monitor working on the Nvidea card.

View 5 Replies View Related

Debian Installation :: No Ethernet Card Detected

Jul 28, 2015

I am installing Linux for the first time right now and I am facing a bit of an issue when it comes to network hardware driver installation. The NIC on my motherboard is a Marvel 88E1111 (computer is very old). During the installation of Debian, I got to a menu which read "No Ethernet card detected. If you know the name of the driver needed by your Ethernet card you can select it from the list", then provides me with said list of driver names.

However, the only driver I could find that came close the NIC I am using was one called just "Marvel", and selecting actually didn't do anything (screen flashes blue and returns me to the same menu). So I continued by selecting the "none of the above" option, and now the new menu reads: "A driver for your hardware is not available. You may need to load drivers from removable media (...)". So I thought I should google for the drivers and see what I can find. The official site of the company that made my NIC doesn't even list my model in their drivers' list (to be expected since it is so old).

Then I found this: URL.., but I was expecting more of a download than the source code itself.

View 2 Replies View Related

Debian Installation :: CD Cannot Find Ethernet Card?

Aug 27, 2011

I'v just brought a notebook computer with a CPU i7 2630QM. I install debian 6.0.2.1 via CD driver, but it failed to success. The probles are three, (1).it reported "cannot find ethernet card" ; (2). It reported "cannot install continue" after the diskpartion step have been successed; (3). It said "netinstall may be a choice", so I say "Yes" and It really downloading something (543 files) and successed . After reboot, I loggin and cannot link to the internet. There is no such files ralated to netware config and I'm not able to config that, for I'm always only a bar finder in an meau.(shy a little,but this is ture). I do it 4 times and the situation and results are the same that I got a smallest netinstalled debian system on my computer and I cannot play music, cannot link to internet. I wonder: How could I install a real debian on my computer? Need I download anther version of iso file or do something that I do not know to makes it works. I can burn an iso image to a real CD by my old computer. I can also install OS such as mint via USB flash drive. In the computer Highly-Orangized world (already-wisdomed world), I have a body already but I've never been installed a sprit or a soul. So I really need to learn from you, from the great debian bbs, learn something of vital importance to take me into wise and freedom.

View 8 Replies View Related

Red Hat / Fedora :: How To Configure Ethernet Card

Dec 10, 2010

I have installed linux on my system. I have connected two ethernet cards in the CPU. I have then connected one cord to one card from the modem. Its working fine. I have connected another cord from the second port to the switch and there by from switch to other systems. However the system is not detecting the second card. I am a newbie to linux and I don't know how to configure it.

View 3 Replies View Related

Fedora Installation :: Update The New Nvidia Drivers Since Dont Seem To Work In The Newer Kernel?

Jul 7, 2011

I was trying to update the new nvidia drivers since they dont seem to work in the newer kernel, or to try to fix it but now when i run yum update I get a screen like this:

Downloading Packages:
Running rpm_check_debug
ERROR with rpm_check_debug vs depsolve:
kernel-uname-r = 2.6.38.3-18.fc15.i686.PAE is needed by (installed) kmod-nvidia-2.6.38.3-18.fc15.i686.PAE-1:270.41.06-1.fc15.i686

[Code]...

View 4 Replies View Related

General :: Download Gallium With Dx10/11 Support For Ubuntu That Work With Nvidia GTX 460 Card

Apr 30, 2011

Im just curious if theres a place were you can download Gallium with dx10/11 support for ubuntu that will work with an nvidia GTX 460 card. and abit of an explanation on what gallium actually is, im unsure if its a graphics driver or program.

View 1 Replies View Related

Debian Installation :: Didn't Recognize Ethernet Card

Sep 15, 2010

I am a rookie to both Debian and Linux. There is a need of Debian so I just started my experience with the Linux system.

I have installed the Debian squeeze testing version and since when I installed the system it didn't recognize my ethernet card, I could only install what is in the installation CD1. Now I have a nice looking Debian system but very simple with a lot of necessary packages or whatever missing (I don't even have the update manager). Is there some way that I could launch an automatic installation of content in the rest CDs from internet?

View 3 Replies View Related

Fedora Hardware :: Ethernet Card Not Detected In 14?

May 31, 2011

i have newly bought Desktop system with the following configuration:

1)intel DH67vr mother board with i7 microprocessor inserted
2)1000Gb hdd
3)Dvd Drive
4)Nvidia graphics card -1Gb

i successfully installed Fedora 14 in that machine.though the mother board has inbuilt LAN port,it is not detected by fedora14.

View 4 Replies View Related

Ubuntu Multimedia :: After Installing Nvidia Card Ffmpeg Desktop Capture Fails To Work?

Nov 10, 2010

i installed an nvidia graphics card recently and this

Code:
ffmpeg -f alsa -ac 2 -i pulse -f x11grab -r 30 -s 1024x768 -i :0.0 -acodec pcm_s16le -vcodec libx264 -vpre lossless_ultrafast -threads 0 ./Desktop/mydesktop.mkv

[code]....

View 4 Replies View Related

Debian Installation :: Emachines G725: Ethernet Card Not Recognized

Mar 4, 2010

i can't install debian 5 in my emachines G725 notebook, the ethernet card is not recognized, it's name: Atheros AR8132 PCI-E Fast Ethernet Controller .

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved