I run a live cd I downloaded, right? Everything goes fine - it installs with no real issues whatsoever, when all of a sudden after the install it boots to nothing but the famous black screen with a white, blinking dash.So, what do I do? It was installed on a Dell Inspiron 9300 laptop, and I ended up completely wiping the XP drive to do it
View 4 RepliesI have installed Debian Jessie 8.0.3 64-bit net install on a MSI CX620. Installation went fine but trying to boot it up the first time nothing but a black screen shows up. I've tried:
Holding shift on startup - Nothing
Press down all keys - Not much, only ctrl+alt+delete makes the screen turn off and then on again.
I'm thinking that I had secure boot on which I now after installation see could be a problem, but I didn't think it would be a problem as I could just go into bios and turn it off, but seeing now that I can't even go into bios it may be a problem.
I'm having no end of problems trying to get 10.04 onto my older Toshiba Satellite A50 laptop that I use as a spare laptop round the house. The laptop previously dual booted with XP and Xubuntu fine. I wanted to give Lubuntu a go to see if it's performance was better on this older hardware. When installing I got the black screen of death, and also got the same problem with the Xubuntu CD. Research pointed me in the way of this article: [URL] I was able to boot the Lubuntu Live CD using the instructions outlined in method A.
Once installed however I rebooted and Grub seemed to be knackered. Just sent me to a recovery console of which I had no idea what to do. As I could no longer boot into Windows either I reinstalled Xubuntu 9.10 and all was fine. I decided yesterday to give it another bash this time connecting to my wireless from the live cd hoping it would download an update to fix this problem. Nadda, Grub this time did show and I was able to boot into XP, but upon picking my Linux distro I now get an unrecognised device error with a long string of charachters and then it dumps be back into the grub menu, choosing the recovery mode version does the same thing.
I've had it with 11.04. 2 days, countless posts read, and I still get the black screen of death. I want to go back to 10.10. Can I do it without a complete re-install, and if so, how?
View 5 Replies View RelatedI'm having a really odd problem since I upgraded to 10.04 on my IBM T40 laptop. Every now and then, especially if I'm using Firefox (so it seems), I will be in the middle of something and suddenly I get a black terminal screen that flashes a few lines ending in "checking battery state" and I get bounced back to the login screen. I log back in and all my work is gone (Firefox and whatever else was open has closed). I was on the web for a while tonight and in a few hours it did it three times. I never had this happen before in 9.10.
Any idea what's going on? If it matters I'm on AC power when this is happening. I haven't used it long enough on battery to know if it does it then or not.
I had Ubuntu 10.04 running fine. Then I got curious about NVIDIA XServer.
"ATI Technologies Inc RV380 [Radeon X600 (PCIE)]" - Video Card
I opened it up, clicked a settings change, and said OK.
It said you need to update your blah blah blah.
Then it said blah blah blah doesn't exist.
Then it said it would create it for me.
Then I said REBOOT!
Now I get a black screen of death.
The only way I can get anything to happen on my monitor that comes from this computer is to boot into the Install Disk and say "TRY UBUNTU".
I have installed Ubuntu 10.10 alongside Win 7 on a seperate partition. But starting from yesterday, my Ubuntu doesn't boot. Instead I get a Black Screen of death. I tried the Ubuntu Safe mode, and hit grub>boot I got a message saying, "No kernel selected."
View 1 Replies View RelatedI just installed Kubuntu 10.10 x64. I copied de .conkyrc from my Ubuntu install, where it worked fine, to my Kubuntu install. But now, it's quite awfull. I've put a screen at the bottom of the post.[URL]
View 1 Replies View RelatedI have Windows XP & Fedora 14 on separate hard drives.seem to see POST upon startup. Same for Windows or Linux.
View 14 Replies View RelatedWhen restarting my dual boot system I wanted to start Win XP. Scrolling down the list I think I hit the left arrow key by mistake. I got what I think is the recovery menu. I chose #1, Continue Normal Boot (at least that's what I think it was). Then I was prompted for my login and password. The system accepted those and seemed happy but will go no further.
I've tried entering 'exit'. This simply causes the system to ask for login and pword again. see the attachment of my screen. I've searched the forum and haven't found a similar situation with a solution.I am reluctant to pull the power to shut down. Until this my system has been very stable and reliable.
I installed a Raid 2+0 a couple of days ago with windows 7, and everything was working fine until today. I left my computer for a couple of hours and when i came back all i see is this black screen with a blinking cursor, then i tried everything on the bios but every time i tried to boot it kept stuck there, right after the bios POST.Then i tried changing the SATA ports, that was something that fixed similar problems on my old Mobo, but this is strange because this mobo has 1 week, and the HD's (2x seagate 500gb) have 2 days, so they should be fine.
Then i tried with my ubuntu lucid lynx live cd, it has saved my life many times, it always works flawlessly and i thought i could use it to restore the boot files, but i was very surprised when it failed as well, it pops a message saying something like "invalid user pwsuid "user: unknown"{0}". Tried it many times with no luck, only that same message...Now i managed to boot from a "slitaz" linux dist. thats about 30mb, it has many useful tools.I can see the partitions/HD's on the Gparted and mount applications, but i still i havent managed to mount the raid i had on my Windows 7 install, im a bit scared of losing data, and i dont even know how to do it.Is there any way to fix thisrom the slitaz live cd?Maybe i could mount the Raid and then restore the Boot files from the slitaz live cd? I have a windows image i could use on the Raid, and i could copy the image files to a partition, make it primary, active and bootable...I really dont know, maybe that wont help either because the ubuntu live cd couldnt boot, i really dont know what whats going on and what could be the cause of this... maybe a worm/virus
I've installed almost every version of ubuntu so far and four different versions on this computer, and I've never had a problem with the installation cd. The install cd on this new version however gives me only a purple screen of death with a white line down the middle. What is going on? The ubuntu-10.04-desktop-i386.iso file's md5sum is fine. I've burned it successfully on two different discs and still I can't install it. I've got a Dell 6400 with an nvidia geForce 7300 video card.
View 9 Replies View RelatedI just finishing burning ubuntu on my laptop and was getting ready to partition my disk to allow space for ubuntu. I restarted my computer and when it was restarting ubuntu logo came up (as it booted from the disc). I was not wanting to install it at this moment so i was waiting for it to load then cancel it(just like a windows installation).It then froze and became pixelated with green and white colours.I thought it was nothing maybe just an error in teh disc. I waited 5-10 minutes then held the power button to shut it off. I then went to settings in the bios and changed it to boot from hdd first. After restart, windows began to load for like 3 seconds then blue screen. I dont know what went wrong or why this is happening.During installation of Ubuntu on my second try I keep getting:sudo: can't read /etc /sudoers: Input/Output errorsudo: no valid sudoers sources found, quittingWhat are the odds of me still having my windows 7 data?and could Hiren's boot cd help?
View 5 Replies View RelatedI am a Linux newbie and did one successful install Ubuntu 9.1 32 bit on my old desktop. Encouraged by that success (and the ease of it), this week I built my own system, which will be my primary system. I am trying to install Ubuntu 9.1 (AMD 64 version) and after the partition selection screen (I chose to partition the entire disk), I immediately get a white blank screen. Then nothing happens. I also tried with Ubuntu 9.1 32 bit, XUbuntu 9.1 64, Ubuntu 9.04 all had the same results.
Not sure if the hardware specs are required, but here they are:
1) Motherboard: MSI KA 780 G
2) Processor: AMD Athlon II X4 630
3) Memory: Corsair 2 x 2 GB, 800 MHz twinx 6400 c6
4) Harddrive: Hitachi sata 300, 1 TB
In desperation, I have started windows XP installation and that seems to progress fine at its leisurely pace. Its formatting the drive right now. During one of the attempts, it did install something*, since after that I see a new ubuntu partition after that. But when I boot from hard disk I get a black screen with cursor. I tried to search thru the forums and nobody seemed to have this exact problem, one guy got a white screen with cursor after a graphics card install, which is not the same. I dont want to go back to windows.
i feel like i should be on the payroll if I have to work so hard and long to get these things working. (ranting stopped, for now) I have ATI Mobility Radeon HD 4330 GPU in my Dell Zino system and finished the upgrade from 9.10 to 10.04 LTS and got the purple screen of death. tried the intel recommended fixes but got nothing. I cant even get into recovery mode.
View 3 Replies View RelatedI initially had problems with the install CD giving the purple screen of death (a screen of vertical purple lines), however I managed to press F6 and set nomodeset and then add "xforcevesa no splash --" to the boot parametres (I guess) and I was able to boot into the live CD. Now however, I've installed 10.4 and I'm back to the purple vertical lines. My Dell 6400 laptop has an nvidia 7300 video card which must be the problem. My question is, how do boot into some kind of low graphics mode so that I can install the proper video drivers? I've been pressing shift to get to the grub menu, but the recovery mode only gets me the purple vertical lines as well, and I don't know what I'm doing.
View 7 Replies View RelatedI just upgraded from Ubuntu 10.10 to Ubuntu 11.04 Natty Narwhal and now I've got a purple screen of death. The download and install process all went okay, but when I restarted the computer through the upgrade dialogue to complete the installation process the system never came back online. When I turn on my computer it goes through the standard boot screen (F2 and F12 options shown while it boots the HDD, ODD, and wireless modem), and then it goes to a purple Ubuntu screen and doesn't do anything at all. I let it sit like that for 30 minutes before turning off the power and trying to boot again, but the same thing happened. I can press CTRL-ALT-DEL and the system will reboot, but nothing I know to do will get me past the purple screen and the Ubuntu logo. DI'm using a Dell Studio 1 desktop computer. It's got a 2.5ghz Pentium processer, 4gb of RAM, and a 400gb HDD. I don't dual boot, and Ubuntu is the only OS installed.
View 6 Replies View RelatedI've been trying to install Ubuntu 10.04 on my Dell XPS 630 but every time i select INSTALL or TRY UBUNTU when booting from the cd, all i get is a black screen with a white blinking cursor. I have tried various options in the F6 menu but nothing has worked. I know the CD is working because I was able to install it inside Windows and dual boot, but I wish to do a fresh install.
View 9 Replies View RelatedI'm so desperate about my problems with installing ubuntu. I got a Fujitsu Siemens Computer AMD Athlon 64 Processor 3200+ 2.01 GHz and 1,50 gb RAM. I got Windows XP home edition on my computer, but i wanna completely switch to ubuntu.
At first I tried to install it with wubi, but it won't work always the same problem.
Then I tried it with the Live CD and tried demo and not install, but it fails. First there is a purple screen with a keyboard and a little guy in a circle, then there's a _ in a black screen blinking, and after that my monitor goes into standby mode. The CD is still loaded from the harddrive, but nothing happens. It feels like the Screen froze down and I can't see anything, what's going on.
I tried it with just installing, alternate install, but it's everytime the same problem.
After install I tried to install my video. Which happens to be nvidia and of course after reboot I now get a black screen showing login and password but it will not work I can only get in through recovery. I have a nvidia ge force 9500gt.
View 6 Replies View Relatedafter i installed ubuntu 11.04 and restart .. nothing appear only black screen i think my problem in my vga card ....i have switchable one in my laptop (ATI Radeon HD 5600 /intel )
View 9 Replies View RelatedI boot from my USB, and when I try to install my screen starts showing a bunch of white words while scrolling, then my screen goes black and my laptop stops running even though it is still on. I have also tried just running it, but the same thing basically happens.
View 5 Replies View RelatedI burned a copy of Ubuntu 9.10 and decided to use it to build up my little server. All was well initially. The CD booted, the language selection came up (I selected English), then there was the option to Try, Install, boot from first hard-drive, etc. I chose install and figured I'd nuke the original drive since everything that I need is off there. The little Ubuntu logo came up (it was shining/pulsating) for about 5 minutes. This went on for some time (the DVD-ROM spinning the entire time furiously) and then..The screen went black and there was a message saying that there was no input to the monitor (as some monitors are prone to do if you unplug/loosen the cable.) I rebooted, burned new CDs, etc. To no avail!
I have an HP (quite reliable in the past.)
* 2.80 Ghz
* 1 gig RAM
I have a Lenovo SL510 thinkpad (CPU 1.80GHz / 2GB / 250GB SATA / Intel GMA X4500 / 15.6" HD LED says the website), totally fresh, just got it today. My goal would be to install Kubuntu 9.10 on this machine. When I try the live CD, screen just goes black, after a while it plays what I assume to be the welcome music. If I try the conventional install screen is just black. The safe graphic mode yielded two grey _, one in the 1/5 and one in the 4/5 of the screen.
View 9 Replies View RelatedI want to make a clean install of 10.04 instead of just upgrading from Karmic.However when I run the boot cd I get the new Ubuntu boot up screen (with the five dots) but after a while I get a black screen and at the same time the cd stops running in the drive.The only thing I can do is pressing down the start button until my computer shuts down.I do get the menu to choose to run the live cd or make a new installation, but whatever I choose, I end up with the black screen.
I'm trying to install on an older IBM Thinkpad R50e, with 500 mb RAM so I figured that it was simply just too old to run the new ubuntu. The strange thing however is that the cd is actually running fine from within my Virtual Machine. This I don't get
I am installing 10.04 on a HP pavilion. I have downloaded the ubuntu-10.04-desktop-i386.iso (live CD). When I try to boot or install from it, the screen shows the "ubuntu" with the red dots for a minute and then a black screen with no action from the hard drive or the CD drive. I think it should be asking what language I want but presing enter does nothing.I have been using Ubuntu since 2006 and after yesterday's repartition I installed 6.06 from a live CD so I know I can install from a CD.
View 6 Replies View RelatedI'm trying to make a complete install of ubuntu 10.4 on an old PC.When I boot from the CD, a text screen is displayed: "PhoenixBIOS Utility"
Code:
BIODate: 09/14/99
CPU type:celeron
[code]....
I recently decided to give Ubuntu another try after a break for a while, and have hit a bit of a road block The live CD booted fine, ran, installed, all flawlessly, so it's now a dual boot with Windows 7. Only issue now is when trying to load the HDD installed Ubuntu, it just hangs on a black screen, no HDD activity light or anything. First up my specs code...
Next, what happens in detail:
Machine posts, loads boot loader with OS options. Whether choose Ubuntu or recovery Ubuntu, it always hangs on black screen straight after that.
Next, what I have tried to fix it so far:
Tried pressing 'e' and replacing the quiet splash with nomodeset, same result with both normal flavour and recovery.
Tried copying the xorg.conf from the live CD filesystem to X11 folder on main system drive. Also tried editing it to try and use generic vesa driver.
I am trying to do a dual boot of XP and ubuntu. I have 3 hard drives and I plan to put ubuntu on one of them. I have created a DVD from the ISO for 10.10 using programs and methods recommended by ubuntu, and it burned correctly onto the DVD. When I boot with the dvd in the tray the computer says something about linux iso then the screen goes black with a Human=Keyboard symbol at the bottom for a few seconds. Then my screen goes black with a blinking cursor in the top left of the screen. I have let it sit for a while and the PC shows no signs of drives working.Also if I remove it the PC automatically boots to windows.
View 5 Replies View Relatedwhy do i get the black screen at install just after when it loads
View 3 Replies View Related