I'm having epic problems with my sound card and upon going through the Sound Troubleshooting, It says to activate my sound card through the BIOS Configuration Screen.How on earth do I find that?
View 9 RepliesIs there a way to find out BIOS password from Ubuntu? I know how to reset/clear the password but all I want is to find out the password. Is it possible from Ubuntu?
View 9 Replies View RelatedI purchased a book about Linux called the Linux Starter Kit. It came with a full install disc. The disc is labeled: Ubuntu 9.04 Jaunty Jackalope, Bootable & Installable LiveCD.
After playing with the thing for a while, I decided to take the plunge and install it on my Dell Inspiron laptop. I went through the entire install. Everything worked fine. I shut the computer down.
The very next time I turned on the computer I got the message "BIOS does not find a bootable source."
Right now, the laptop is a big paperweight--unless I either learn how to get Ubuntu to run installed so I can do real work with it, or reinstall XP.
Aftrer use "Suspend to RAM" my system hang and show many error messages ("read error" or something like this), after restart BIOS can't find disk at all. I have latest version Kubuntu 64bit, (few days ago upgraded) and Segate SATA disk.
View 3 Replies View RelatedHow can I Bios configuration and check USB setting?
View 7 Replies View RelatedI've recently installed an internal optical drive (Blu-Ray RW: LG WH10LS30) into my dual boot system. The Windows partition had no trouble with this. However, ubuntu began taking ~30 extra seconds to boot. Once ubuntu finally gets running, the drive is not detected at all. dmesg showed the following:
Code:
$ sudo dmesg | grep -i 'ata2'
[ 1.430315] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf098 irq 15
[ 2.777449] ata2.01: failed to resume link (SControl 0)
[ 2.933509] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.933521] ata2.01: SATA link down (SStatus 4 SControl 0)
[ 2.933531] ata2.01: link offline, clearing class 3 to NONE
[Code]...
Further investigation revealed that changing my BIOS settings for SATA from IDE to AHCI fixed this problem entirely. The ubuntu partition boots fast again, the drive is working. Except, this causes the Windows partition to fail completely. I'm wondering, what is the best way to fix this? Hopefully without a complete reinstall. Is there a GRUB command that could apply AHCI to only the optical drive during ubuntu boot?
Can anyone tell me the command to find Dell system motherboard BIOS for a linux machine ?
i tried find dmidecode but that does not fetch me appropriate output.
I have an Acer T135 desktop with 2gig ram and a Sempron 3300+ single processor. Whenever I boot up, the bios screen seems to hang around for 20-30 seconds before it disappears and boots up. From the time the bios screen disappears it takes about 20 secs for Ubuntu to finish loading (which is fine).So, is it possible to speed up the bios time? If so, how?
View 1 Replies View RelatedSo I just recently got an HP pro 1005 all in one PC and tried to install Debian 8.2 on it through a bootable Uefi USB, however, when trying to install, there's always an error like this: "The attempt to mount a file system with type ext4 in LVM VG debian-vg, LV root at /failed."
Also, no matter how many times I completely wipe every partition, there's always this message at the start of the installation saying Windows is already installed as BIOS compatibility mode, and asks me if i still want to install as Uefi, I was wondering if that had anything to do with my error.
I checked the drives health and there wasn't any kind of problems, passed all the tests.
For anyone reading this I was wondering if there is a way for me to change the dell bios splash screen to another picture, like Tux the penguine or something like that.I've seen alot of people say not to do this due to the editing of the bios and the probability of crashing your system.I was wondering if there was a safe and easy process for doing this???
View 1 Replies View RelatedI dual booted my system with Linux Mint on a Windows 7 operating platform. I later thought it would be better to use Ubunta as I am a newbie to the system and there is more help available. I tried to uninstall Linux Mint through Windows but I am not sure I did. I then installed Ubunta from a CD and the whole system crashed. I am now unable to boot beyond the BIOS screen and am using Ubunta CD to access the internet. I would be grateful if you could shed any light on what has happened. Unfortunately I have no separate boot up disc.
View 2 Replies View RelatedI recently dumped XP and installed Fedora 14. Since then I have been unable to access the BIOS Setup Screen.The Laptop is Fuitzu Siemans D Series 8820, The BIOS version is not in the manual. wouldn't have thought Fedora could write to the BIOS.Perhaps it is special key presses causing the problem.I am impressed with Fedora 14.
hank you.
Kiteman
I just upgraded from 9.04 to 9.10 (using Update Manager) in an attempt to get to 10.04. Installation and upgrade seemed to go OK until reboot. Now I only get a black screen - I don't see the grub menu, I don't even see any way to access the BIOS menu- not even a blinking cursor. I can hear it start and I can see the numlocks key go on. Ctrl-Alt-PrtScrn-B does not reboot (nor does Ctrl-Alt-Backspace- but I didn't expect that would) Surprisingly Ctrl-Alt-Del does (or at least it sounds like it does) reboot the system. I do have a NVIDIA cards and after reading around I suspect that this is likely the problem but I have no idea what to do now..
Here's what I've attempted:
I figured since I wanted to get to 10.04 anyway and this was so troublesome I could just go do a fresh install with a Live CD or USB to 10.04. However, even with a live CD or USB I still just get a blank screen.
Continually holding down F2 (and other function keys to try to access Bios)
Holding down Shift while booting
Esc while booting
Moving the monitor to the VGA port (as opposed to the NVIDIA card).
Other information...
Previously I had tried to upgrade to 9.10, but ran into problems with it not recognizing my RAID, so I just found it easier to go back to 9.04. (So although this is likely a graphics problem I guess the possibility is that now it doesn't even see my boot drive- although- if that was the case, I'd assume I wouldn't have the same problems from the CD or USB boot.) My ultimate goal is to get this to 10.04, if I could do it with an upgrade instead of a fresh install I'd prefer that, but at this point just getting back to a functioning computer would be ideal. I see many options in other posts for how to get back once you can access a command line- but since I can't even see that, I'm not sure what to do now.
I got a new monitor (a used one), so i hooked up my very old PC. I went to the living-room and checked something. I went back and got a black screen. i did a "cold reboot" (?) and: nothing. Not even the BIOS-messages.
Now i am missing the terms: I replaced the "thing" where the monitor gets plugged (i would say its a PCI-slot, but as the graphics are build-in it doesn't seem to be a graphics-card. I simply don't know. I searched for PCI-slot +monitor and that picture should show it: picture). I rebooted with a live CD and voila: i get a screen. I rebooted into the installed OS and i get a screen. Then it freezes. "Cold reboot" (if it is called that way): again nothing.
[Code]...
I have a problem where my PC will stop at the BIOS logo screen after a reboot. The keyboard and mouse don't get power ie no lights. I can power off / on and it will boot normally. The problem started after a fresh install and after installing the updates. ie before updates I could reboot and it was ok. I moved from Slackware and have Win7 and they don't have this problem. Also Ubuntu and Arch rebooted normally when I tried them. I have Opensuse 11.4 x64 on it's own HDD (Samsung F3) The system board is an Asus P8P67 Deluxe (Sandy Bridge) and the HDD is on a SATA3 port. Could it have something to do with the EFI BIOS? Would it be worth trying a newer kernel? it may better support my hardware. I'm hesitant as I don't want to break Lirc as it took awhile to get it working properly on the stock kernel.
Also where can I add '/etc/init.d/lirc restart' so I don't have to run it manually every time time I launch XBMC. I couldn't find 'rc.local'
I installed a Raid 2+0 a couple of days ago with windows 7, and everything was working fine until today. I left my computer for a couple of hours and when i came back all i see is this black screen with a blinking cursor, then i tried everything on the bios but every time i tried to boot it kept stuck there, right after the bios POST.Then i tried changing the SATA ports, that was something that fixed similar problems on my old Mobo, but this is strange because this mobo has 1 week, and the HD's (2x seagate 500gb) have 2 days, so they should be fine.
Then i tried with my ubuntu lucid lynx live cd, it has saved my life many times, it always works flawlessly and i thought i could use it to restore the boot files, but i was very surprised when it failed as well, it pops a message saying something like "invalid user pwsuid "user: unknown"{0}". Tried it many times with no luck, only that same message...Now i managed to boot from a "slitaz" linux dist. thats about 30mb, it has many useful tools.I can see the partitions/HD's on the Gparted and mount applications, but i still i havent managed to mount the raid i had on my Windows 7 install, im a bit scared of losing data, and i dont even know how to do it.Is there any way to fix thisrom the slitaz live cd?Maybe i could mount the Raid and then restore the Boot files from the slitaz live cd? I have a windows image i could use on the Raid, and i could copy the image files to a partition, make it primary, active and bootable...I really dont know, maybe that wont help either because the ubuntu live cd couldnt boot, i really dont know what whats going on and what could be the cause of this... maybe a worm/virus
I have been running Ubuntu 9.04 for the past year. Tonight decided to upgrade to 9.10 thru update manager. Every thing regarding the install seemed fine until the request to restart the computer. I hit the restart and it will not boot up. Computer goes thru the normal restart screens.
Screen flashes with bios info--no hard drive detected, then proceeds to show booting from hd, then loads grub stage 1.5 (not grub 2)and screen goes blank.
I come bearing a question that I hope I can get some info on. Here's the situation: I installed Ubuntu 10.04 Netbook Remix on my Acer Aspire One (didn't want it, but got it for free). I installed and am dual booting it with windows 7 basic. Both worked fine until this morning when the laptop ran out of battery and shut down.Now, on start up, the BIOS screen flashes, and its not the same BIOS screen, but I can't tell what it says, its moving too fast, the laptop then restarts. This problem may be bigger than the linux part of it
View 9 Replies View RelatedI want to see what is the configuration of my Wind River Linux (actually I want to see what modules are installed in it when it was built). I can't find the configuration file.
View 14 Replies View RelatedI have some trouble booting the current KDE Live Cd (11.2) on my Laptop. I tried USB and CD both. The laptop hangs on the bios bootscreen and I cant select any further option like a boot device. No problem I have with an Ubuntu CD.
View 9 Replies View RelatedAs you know,whenever user turns the PC on,a beep sound is heard,then the bios starts,but recently this beep sound doesn,t come out of the case,and,so the bios does not start(nothing seen on the screen),then i have to hard reboot several times,and mostly,i have to shut down for some seconds to remove this problem,also sometimes this beep sound comes out but repeatedly for many times.
I am suspicious about the shut down button,because it,s a long time that this button usually is blinking.
-What is the reason for this problem?
-Is that related to hardware or software?
i started the installation programme and it went through a couple of options then says it has to restart the laptop when i restarted i got this message before the bios screen and then the computer does nothing
" Booting GRLDR.....
Turning on gate a 20 .... Success
Srating cmain() .... _"
I'm trying to install Debian Lenny on my new Dell XPS 8100 Desktop with 2 x 1To SATA HD. (No Windows or any other OS install is present on the system) The Bios allows me to change the SATA mode to either "ATA" or "RAID"
- When SATA mode is set to RAID, the installation goes without issues, but when it comes to load into the system, I've got that Stage 1.5 Grub Loading... Error 2 problem. I assume this is due to the Bios "RAID" configuration. I then switched the SATA mode to "ATA" in the Bios and now I can see the menu that allows me to boot my debian install but that part actually fails too saying "ALERT /dev/sda1 does not exist"
- When SATA mode was set to ATA, I tried to re-install the system but this time my drive was not recognized by the installer: "No common CD ROM drive"
I've got two laptops running Ubuntu. Both have had Lucid installed from the live cd. I have upgraded one of them to Maverick. Both distributions are running great after they boot up, but I haven't experienced any faster boot times with either distibution. Both boot to Bios and then the screen goes black with a blinking cursor in upper left corner of the screen. The black screen remains for 30 to 45 seconds and then I get the Ubuntu splash screen for maybe 5 seconds, and then desktop. Why am I not seeing faster boot times? I realize 45 to 60 seconds is good compared to other os's, but I anticipated much faster boot times. Shut down on the other hand is quite fast at maybe 5 to 10 seconds. Does anyone else get this black screen on boot? Seems like wasted time cause I can't tell what's going on during the time there is a black screen. This is not a real big deal breaker, as I don't reboot very often, but I just wonder why bootup isn't faster.
View 7 Replies View RelatedI am having issues with 3d I am trying to start up a game called auteria but it displays this error "Could not find a compatible opengl display resolution. Please check your driver configuration. (Error: Couldn't find a matching GLX visual)" I am on ubuntu 10.10 could anybody give me a solution on how to fix this issue?
View 5 Replies View RelatedI've a problem which occurs during the boot process.I'll turn on the machine and Slackware (13) will begin loading. I'll get the "BIOS data check successful message" and then the screen will go black. Nothing happens after that. This doesn't happen every time I boot and other than that, Slackware works fine.I'm guessing it's the video card. Uname and lspci output to follow.
uname -r: 2.6.29.6-smp
lspci -vv:
00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM
[code]...
I ran Ubuntu desktop for a while then installed Ubuntu Server 10.4. I restarted the machine after install and now I am freezing at the BIOS loading screen right after the "Intel (R) Matrix Storage Manager option ROM v6.0.0.1022 ICH8R" part.Have tried: taking all USB devices, cd's, etc, out.Edit: ATA AHCI BIOS, Version iSrc 1.02.23 11212006Am installing on a Dell Dimension E520
View 1 Replies View RelatedI bought my previous laptop without thinking about whether linux would run or not, I ran into a lot of ton of trouble and had to use ndiswrapper for the wireless and I had to wait year before a patch came so the monitor could be used, and 1 year before it ran stable (back then I used ubuntu). I have a medion computer, their consumer service are very nice, however I fried the hard drive, and when I got the computer back the wireless card weren't visible from linux... I then went into the bios to find out that there were only 2 settings to choose between "off" and "last state", and last state apparently also meant off... in windows both off and last state could be turned into "on" by clicking Fn + F7... but this did not change the bios setting and therefore linux wireless were still off (I know it sounds strange).
Anyway My girlfriend needs a windows computer for gaming (and all of out computers run only linux with the exception of mine which dual boots), so I have desided to buy a new one. My main question is this: which laptop manufactures play nice with linux... I have heard only bad things about dell costumer service, and I want to buy a laptop that I can return w/o to much hassle if it doesn't perform as I am hoping...
My second question is, is there any way to check whether the graphics card and such are compatible with linux ahead of time, (w/o acualy buying it where you can do lspci and then submit it to some webpage) 3rd are there anyway to check whether the fn + key buttons and webcamp works ahead of time (this is only of minor importance, as I find that generally the sound up and brightness up/down works, and that's the most useful)
I have been running Ubuntu 10.04 under Windows 7 (Is this call WUBI?) without any problems for a while. My other machines only run Ubuntu (9.04 & 10.04). I decided to give it a try to the latest Ubuntu 10.10. After going through the successful installation and then rebooting, I am getting the following error message once I select 'Ubuntu' in the boot up menu right after the BIOS screen: Booting ' Ubuntu 10.10, kernel 2.6.35-25-generic'
[Code]...
Where to find SSH Server Configuration Howto for Dummies? To Ubuntu 10.04 LTS Server? Must work like FTP/SFTP and user accounts must be in MySQL. Just for File Transfer and user can open only his / her own ./ where is public_html in root..
View 4 Replies View Related