General :: Bios Configuration And Check USB Setting?
Feb 19, 2011How can I Bios configuration and check USB setting?
View 7 RepliesHow can I Bios configuration and check USB setting?
View 7 RepliesI want to go back to Windows. However I can't uninstall Ubuntu since I can't boot up from CD nor USB no matter how I change the BIOS setting. I chose CD or USB but it will go straight to Ubuntu. How can I get rid of it without taking out the hard drive and have it formatted from another computer.
View 4 Replies View RelatedI have CentOS 5 running on my machine "Appro 1122hi". Now i need to replace centOS with RHEL 4.
Steps Followed is, i changed the bios setting to start booting form CD.
when i try to boot form CD i get "PXE-E61 media test failure, check cable" error
Hardware details. AMD opteron processor 248, 64 bit machine and 16 GB ram.
When I boot up my desktop, lilo spends more than a minute printing a string of dots to the screen, before it declares "Bios data check successful" and then loads slackware normally.
I did
Code:
echo compact >> /etc/lilo.conf
lilo
but lilo declared that to be a syntax error and is as slow as ever. My lilo/conf contains
Code:
# LILO configuration file
[Code]....
Can anyone tell me how to check control-M configuration
View 1 Replies View Relateddo you mount a dvd when the BIOS does even have a setting for DVD's?
View 4 Replies View RelatedI have decided to load the OS on a old HP Compaq DX2000 MT to see if its for me before putting it on my main machine.
I loaded Ubuntu version 10.10 last night everything was fine except I could not get my wireless adapter to work, I decided to connect via ethernet to get the latest updates and drivers.
After the updates and restart I now get the non executable memory error. when I enter
/usr/bin/check-bios-nx --verbose
I am told I have NX capabilities and should go to the bios and enable it. There is nothing in
the bios to enable as far as I can see. So I enter the command
sudo rm /etc/update-motd.d/20-cpu-checker
I have an issue where the CPU isnt running at full capacity. I there some way to enable all the CPU, is it a power setting in the BIOS?
View 5 Replies View RelatedI recently put together a new machine with Ubuntu 9.10 I couldn't boot it even live (or any live distro for that). It wound up being either a ACPI or APM setting in the BIOS that got it to boot, I say either because I spent probably 10 hours in there turning things on and off until it worked. It was about 4am so my memory of it ain't that great. TO get up to date, I was adding a HDD and having some issues with it being detected right. So back in the BIOS I was and accidentally loaded the defaults! Now I can't figure out what I did last time I've been at it for hours with no luck.
If I jump into grub b4 it boots and add the acpi=off the system boots up but with the side effects of no pwr mgmt. I need it to be able to sleep and shut itself off. I've always had good luck with Ubuntu in other machines so I'm not that great in there, and honestly don't know the difference between apm/acpi. The MOBO is an ASUS P4C800 Deluxe, AMI Bios. I'm gunna keep at it in the mean time, if by any chance I figure it out I'll post what it was (after I write it down).
While building my new server I grinded ta hold shortly after inserting the FDR10 DVD.
Hardware:
Chenbro es34069
Albatron KI690-AM2
AMD Athlon X2 64 4850E
IDE 2.5" HD (master)
IDE Slimline DVD (slave)
4x SATA II swap (still empty)
It stops at the message "net: Registered protocol family 2" but in one of my desperate attempts I changed almost every setting in my BIOS (updated to 1.07) and all of a sudden it passed on. Stupid enough I figured it would be a small effort to find the setting and figure out the problem, so I changed them one at a time after loading the defaults....
I have a Dell Windows7 PC configured with BIOS RAID1. I want to install SLES10 and configure it with Software RAID1. My question is: Do I need to reconfigure the BIOS RAID setting and if so What should it be.
View 5 Replies View RelatedI would like to be able to change my BIOS setting to enable me to access a live cd or dvd to try some Linux Distros. At the moment ,when I access the BIOs ,it willl not stay as adjusted ,it ignores the settings ,it goes to default.
View 8 Replies View RelatedI changed something in the BIOS which causes a kernel panic, if my card is installed (Ultra ATA/133 PCI-to-ATA Host Controller). I had it working fine til a month ago, when I installed some Linux on a HD on that card. That booted fine too, and I did some disk switching. Still all was well, but yesterday I tried to boot XP (2nd IDE master)(GRUB is Ubuntu/2nd IDE slave), and XP wouldn't load. I clicked here, and clicked there, and now XP and Ubuntu boot, ONLY if the RAIDbus card is Out. Put the card in, and I get a kernel panic/lockup. This HAS to be a BIOS function - nothing is different on the disks, including GRUB menu.
View 1 Replies View RelatedI'm having epic problems with my sound card and upon going through the Sound Troubleshooting, It says to activate my sound card through the BIOS Configuration Screen.How on earth do I find that?
View 9 Replies View RelatedI've a problem which occurs during the boot process.I'll turn on the machine and Slackware (13) will begin loading. I'll get the "BIOS data check successful message" and then the screen will go black. Nothing happens after that. This doesn't happen every time I boot and other than that, Slackware works fine.I'm guessing it's the video card. Uname and lspci output to follow.
uname -r: 2.6.29.6-smp
lspci -vv:
00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM
[code]...
So I just recently got an HP pro 1005 all in one PC and tried to install Debian 8.2 on it through a bootable Uefi USB, however, when trying to install, there's always an error like this: "The attempt to mount a file system with type ext4 in LVM VG debian-vg, LV root at /failed."
Also, no matter how many times I completely wipe every partition, there's always this message at the start of the installation saying Windows is already installed as BIOS compatibility mode, and asks me if i still want to install as Uefi, I was wondering if that had anything to do with my error.
I checked the drives health and there wasn't any kind of problems, passed all the tests.
I've recently installed an internal optical drive (Blu-Ray RW: LG WH10LS30) into my dual boot system. The Windows partition had no trouble with this. However, ubuntu began taking ~30 extra seconds to boot. Once ubuntu finally gets running, the drive is not detected at all. dmesg showed the following:
Code:
$ sudo dmesg | grep -i 'ata2'
[ 1.430315] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf098 irq 15
[ 2.777449] ata2.01: failed to resume link (SControl 0)
[ 2.933509] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.933521] ata2.01: SATA link down (SStatus 4 SControl 0)
[ 2.933531] ata2.01: link offline, clearing class 3 to NONE
[Code]...
Further investigation revealed that changing my BIOS settings for SATA from IDE to AHCI fixed this problem entirely. The ubuntu partition boots fast again, the drive is working. Except, this causes the Windows partition to fail completely. I'm wondering, what is the best way to fix this? Hopefully without a complete reinstall. Is there a GRUB command that could apply AHCI to only the optical drive during ubuntu boot?
H/W : Intel 1.6GHz, BioStar U8548
S/W : Ubuntu 8.04 + RTAI + EMC2 (CNC controller)
In configuring CNC controller system, latency-test must be run to find maximum jitter of the system. It counts about 17,000 ns for few minutes, then it suddenly rise to 260,000 ns. It is impossible to control CNC with such large jitter.
In tracing this problem, I found that Award BIOS setting "Delay Prior to Thermal" is firmly engaged in making a problem. When I set this setting to 4 minutes, it makes large jitter periodically with exact 4min 15sec period. When I changed this setting to 8 minutes, its jitter is 8min 15sec period.
But, there is no option to disable this BIOS setting.
I heard that ACPI enabled OS can take over the ACPI function of the BIOS (which may include this "thermal" setting), but RTAI tuned kernel don't include ACPI modules.
Is there any solution to this problem ? If I recompile kernel with RTAI with ACPI processor module enabled, would it be a another problem maker ?
I'd love to know how to check the original configuration of a self-installed package? For example, I would like to install the package XXXXX. I did:
./configure
make
make install
After the installation, I would like to know what the configuration I used for XXXXX's installation. Maybe some dependencies (for example, A,B,C...) were not found so that XXXXX was installed without depending on A,B,C.... However, now, I would like XXXXX depend on A,B,C... How to check whether the current installed XXXXX's original configuration?
i have centos 5 running with apache, mysql, php and phpmyadmin. phpadmin is working well but it is showing the following error on the page:- Cannot load mcrypt extension. Please check your PHP configuration.i just try to install mcrypt but it is asking for required dependencies libmcrypt.
View 1 Replies View RelatedI'm trying to install Debian Lenny on my new Dell XPS 8100 Desktop with 2 x 1To SATA HD. (No Windows or any other OS install is present on the system) The Bios allows me to change the SATA mode to either "ATA" or "RAID"
- When SATA mode is set to RAID, the installation goes without issues, but when it comes to load into the system, I've got that Stage 1.5 Grub Loading... Error 2 problem. I assume this is due to the Bios "RAID" configuration. I then switched the SATA mode to "ATA" in the Bios and now I can see the menu that allows me to boot my debian install but that part actually fails too saying "ALERT /dev/sda1 does not exist"
- When SATA mode was set to ATA, I tried to re-install the system but this time my drive was not recognized by the installer: "No common CD ROM drive"
A few days ago I upgraded my debian sid system, and since then systemd does a filesystem check on every boot which takes over two minutes, disobeying the existing settings I had. How can I set systemd to do a filesystem check only once every a set number of mounts, like I had set up before the upgrade?
View 5 Replies View RelatedBecause the version of the microcode installed by the package intel-microcode in Testing (2009-03-30) is way older than the one currently offered by Intel (2010-02-09), I only installed the package microcode.ctl and let it fetch the microcode. However, after reading the Read Me files, manual pages and system logs, and checking the directory where the microcode is stored, I have not been able to find an option to check the version of the microcode in use.
This is the output of update-intel-microcode:
Local version:
Remote version:
could not extract the actual data of remote microcode
since I am on a Dell inspiron 1545 laptop, being able to display my battery charge is critical. After some extensive googling, I found I need a command 'acpi', which does not exist on my computer. I cannot seem to find it in the packages database; the closest thing being 'acpi-support' apt-get install also can't find it.
I tried cat /proc/acpi/battery/BAT0/state, but that only shows me if the battery is discharging or charging and doesn't give me an actual percentage.
Heare i come with Nagios Problem, When ever i stop nagios it say's
[root@x292 ~]# service nagios stop
Stopping nagios: No lock file found in /usr/local/nagios/var/nagios.lock
When ever i restart nagios it say's
[root@x292 ~]# service nagios restart
Running configuration check... CONFIG ERROR! Restart aborted. Check your Nagios configuration.
my nagios.cfg file is
# 'Nagios CFG 1'
[Code]...
Currently I have 2 Arch Linux boxes, one upstairs, one downstairs. Well, The router is downstairs, and my office is upstairs. My windows laptop is hooked up wireless, and one of my linux machines is upstairs, so I can't exactly connect it to the router. Now I know how to setup a bridge in windows to allow access to internet from other windows machines, my 360, etc, but How do you exactly do it in Linux, something i've never tried doing before.
View 1 Replies View RelatedHave installed Suse 11.2. how can I change the calendar format dd/mm/yyyy and how to configure the system to sync.from an ntp?
View 1 Replies View RelatedI use jessie-32bit of kernel 4.1.3 on ASUS EeeBook X205TA. But it doesn't recognize buttery status.Result of my investigation, the incomprehensible ponts is below.
・"acpi -b" outputs no information.
・There is not "battery" directory in /proc/acpi/. (button only exists.)
The following is my system informations.
Code: Select allacpi -V
Adapter 0: on-line
Cooling 0: intel_powerclamp no state information available
Cooling 1: Processor 0 of 10
[code]...
I want to check battery in console and fluxbox Desktop.
I would like to run a mailing daemon on my system that would receive incoming mail and forwards it to my Gmail account. I have no experience in mail services and forwarding mail at all. where to start reading and/or look for clues?
View 3 Replies View RelatedI have two ethernet NIC's on my debian server. One built-in Realtek [eth0] (attached to internet), and a PCI Nvidia ethernet card [eth1] (attached to my Win7 netbook). I used this guide to setup the bridge: url. It worked when I was behind a router. But when I moved the computer in front of the router, to direct connect to the internet, the internet stopped functioning on any device that I plug into my Nvidia NIC. The name of my bridge is 'br0'. Does anyone know how to fix it, so I can route the internet to my second NIC?
My Win7 netbook displays this at an 'ipconfig' command:
Windows IP Configuration
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix:
Link-local IPv6 Address.....: fe80::143e:4cab:f802:8611%12
Autoconfiguration IPv4 Address..: 169.254.134.17
Subnet Mask.......:255.255.0.0
Default Gateway......:
My Debian interfaces file:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo br0
iface lo inet loopback
# Set up interfaces manually, avoiding conflicts with, e.g., network manager
iface eth0 inet manual
iface eth1 inet manual
# Bridge setup
iface br0 inet dhcp
bridge_ports eth0 eth1