I applied all updates to my Kubuntu 10.04 installation, and shutdown and went to bed. Booted up this morning and found:
[code]...
This error is returned if the module load command is used before loading a Multiboot kernel. It only makes sense in this case anyway, as GRUB has no idea how to communicate the presence of location of such modules to a non-Multiboot-aware kernel. lets re-install GRUB. So I booted up my live CD, and ran:
Same error. So I started looking around, and most complaints of this particular error seem to be dual boot environments, which I found rather odd, as I have never dual booted this machine.....
When I try and boot my Debian computer I get the messages: Grub Loading stage1.5. Grub loading, please wait... Error 15 Is there any way of recovering from this - or is it simply a fresh install? I was attempting an upgrade from Lenny to Squeeze and despite a few hurdles it looked like it was all happening. Got the new kernel loading, and the new grub. It looked as though grub2 was working so I ran the grub-remove-legacy-support command (something like that) and now my computer won't boot grub or Linux.
I'm assuming the MBR on my harddrive is lost, however I don't know what state the partition is in. I'm guessing that maybe this has been lost as well. I tried a few tools from the Ultimate Boot CD but nothing here was able to re-install my grub or boot from any partition or even mount my file-system. I'm fearing the worst but would like it confirmed before I blow it all away with a new install.
I am trying to set-up a home server using Ubuntu 9.10 server edition. My PC has 4 x 500Gb SATA drives which I will use for storage. I also have a 80Gb IDE drive which I want to install OS on. During installation the 80Gb IDE drive shows as sde. When doing the install I chose to install to whole disk (sde), all appears to go well. When I reboot all I get is "GRUB loading, please wait.... Error 15" Is the problem caused by my drive being sde and not sda? I have also tried partitioning sde as /. /boot and swap, still get Error 15.
I'm getting a funny error after trying to add a new internal hard drive to my computer. After adding the new drive to the "Slave" slot GRUB will not load properly and gives me the following error Grub Loading, Please Wait Error 17 I've checked in my BIOS and the "Master" drive is still the one where grub is loaded. When I unplug the new drive the problem disappears and I can load Grub normally. I've searched the threads, but couldn't find a similar problem, or a problem that could be applied to mine. I've also tried loading the live CD, but my internal CD drive is broken, and the external one I have doesn't seem to recognized during boot time.
i am using a RAID 1 with ubuntu 9.04. I tried to upgrade to 9.10. Total failure. Fed up and I tried to reload 9.04 onto RAID with previous "Ubuntu 9.04 Alternate Disk". Again no luck. I decide to load 9.10 on a single hard drive without using the second HD. I inactivated the second HD. Loading 9.10 is ok. When it asked me reboot I am getting the "GRUB loading, please wait.... Error 22". This is purely a Ubuntu dedicated computer, no windows in it.
I know nothing about this at all. I have never programmed a computer.. I loaned my tower to a friend who put this on ...now i have it back and cant get to my windows 98. all i get each time i boot is ...
GRUB loading ... error:no such disk grub recover>
I have tried ubuntu sec 8.4 recover mode and all i get is unreconized command.. i do not know how to set anything.. i have no disks for this not even the orginal windows recover disk.. is their anything i can do to get win to run as it use to??
My Server runs "fine", then I type init 6 for rebooting or some cron job initiates Init 6 and my system stops in grub at: GRUB loading stage1.5. Error 18 After another Ctrl+Alt+Del the system boots as if anything happened. this is why I doubt that it's an issue of too big HDD or BIOS.
I been running both OS's for a few months now with no major problems besides wireless internet issues. Today, however, as I go to boot my laptop up, the Dell logo loads with the F2 and F12 boot and setup options which both work. Directly after that though I get the message "GRUB loading. Symbol '?' not found. Aborted. Press any key to Exit." then it repeats when I push a key, and then it tells me to press F1 to retry, F2 to go to setup, or F5 to run diagnostics. It passes all the tests in diagnostics. I've tried booting off of the ubuntu cd I used to load it initially with no luck. So I'm stuck at either that error message or in setup but I can't go any further, and it does not change anything when I tried to boot from the cd.
I have an Ubuntu Jaunty server with 4 x 1 TB Hitachi SATA Hard drives and a 4GB IDE Flash Drive. I installed the root file system to the IDE Flash Drive and setup the 4 x 1 TB Hard Drives as a RAID 5 for the home partition (I actually allotted 3 Gigs on each drive as swap space as well). My problem occurs however when I restart my computer after the server installation. Grub doesn't load fully and I am left with a "GRUB_" message on the screen.My root partition is ext3 and I have also tried the same configuration with a boot partition as well on the IDE drive to no avail.
I was and idiot and stared messing around gparted before I was ready to partition my hard drive. Consequently I messed up my partitions, and when I restarted my computer a screen comes up that reads:
GRUB loading. error: no such partition grub rescue> _
Have I killed my computer or is there some way I can fix it?
I have a dual boot system with Windows 7 and Ubuntu 9.10. I booted into Ubuntu and started the process to upgrade to Ubuntu 10.04. When it was all finished, it restarted and attempted to boot into the GRUB load screen. However, I get this message:
I have a CLEVO laptop and it currently has Windows 7 installed. I now want to create a separate partition to install Ubunutu 9.10 64bit. I attempted to install this and the install part worked fine but as soon as I rebooted all I seem to be getting after the BIOS is 'grub loading'. I get no other error messages and am stumped on what the problem is. It also meant I couldnt load windows either but I fixed this by loading the windows cd, running repair and then fixing the MBR which another thread mentioned. Once this was done windows loading up ok. I have checked nearly every setting and it has made no difference. I tried reinstalling 9.10 but came up with the same problem. I am not sure what I did in Windows may have caused it. I have a 320gb drive and I shrunk it using disk management as I know the ubuntu will see this free space and install the OS onto it. Should I have left this and let 9.10 create some space automatically during install?
I had win7 on my laptop. Before sometime I install Ubuntu 9.10 and it worked fine. Bur later that I resize the partition using third party software. Now when I restart the system it is giving me an error GRUB Loading error: unknown filesystem grub rescue> I am not able to access the harddrive. I am very new to ubuntu.
I went through the procedure to install Ubuntu 9.10 alongside Windows XP. The installation completed without complaint. But when I reboot the PC I get the error message "Grub loading error: no such partition...". and the keyboard is dead. I am using a Sony vaio PCG-FR215H laptop on which I have fitted new HDD and CD-drive. I carried out the installation by first booting up a live version of Ubuntu on a USB thumb drive and then clicking on the 'install Ubuntu' icon on the Live Ubuntu desktop. (I coudn't use a Live CD to install as this fails for some reason). I regained use of Windows XP on the PC by booting with a Windows 95 boot floppy and typing "fdisk /mbr". So, does anyone know what might have cased this grub error? Also, are there ways to try and fix the problem manually. I.e. can I get a copy of good versions of the files that are likely corrupted and then replace the stuff that I will have written over when I did the "fdisk /mbr"?
The follwing message appears when i start my computer (loaded with ubuntu 9.10 and windows) "grub loading error reading". i am not able to proceed further. and the part that baffles me the most is that i am not able to boot from the live cd as well.
My laptop is running Fedora 12. I installed BackTrack 4 onto an external USB hard drive using a LiveCD. Now when I boot my laptop. I get this: GRUB Loading stage1.5. GRUB loading, wait Error 21. I never touched anything with my internal drive. When I was reviewing what partitions the installer was going to format, the swap partition for my internal drive (Fedora) was set to be formatted even though I did not specify this. Fedora never used to show GRUB loading at all. Screen was blank until Fedora starting loading. Maybe this means that this is a copy of GRUB from my BackTrack disc? I ran 'fdisk' to look for anything suspicious and under /dev/sda1 (internal drive, boot partition) it says "Partition 1 does not end on cylinder boundary."
I'm using an Eee netbook so i have no CD drive. I've used Linux for about a week. Someone else installed it for me using their flash drive. If I need to use a flash drive to install I will need info on how to install to a flash drive. I had it set up so i could choose windows or ubuntu at start up. logged into windows to play a game and all it brought up was.
GRUB loading. error: no such partition grub rescue>
I have just installed Lucid Lynx as after a live run of it I thought it was about time to upgrade. Everything ran smoothly in the live version so I backed up my files and installed it. When I went to boot I get this - Grub loading, please wait ... Error 2
The strange thing is it seems to be specific to the computer. I have an older, lower spaced desktop, computer that I tried the hard drive in and it worked fine. Problem is its too low spaced for what I want so it seems the install went ok but its something with the computer? How I would be able to boot into the install?
I just (basically) completely uninstalled my OS by accident. In synaptic package manager I selected to completely remove volume control (which had been going haywire for god knows what reason) with intent to immediately reinstall. I didn't put 2 and 2 together when it said it'd remove all related files including the kernel... hal... restricted drivers... everything got uninstalled. Network manager crashed...
I decided to try my luck with restarting (what was left) of the system. Now I'm looking at a boot screen of: loading grub... error 15: file not found.
Did I have to just make a boot disc and reinstall the os? or can I just "put the pieces back together" as it were and reinstall with a 'sudo aptitude update' once I get network up again?
I started my laptop this morning with no problems. It was doing a file system check which I quit (pressing C) after about 30%. The only problem I had was wired networking didn't seem to be working (though wireless was). No problem: this happens sometimes and a restart fixes it. After restart: the GRUB screen hangs at "Loading stage 1.5" for ages before issuing Error 25. Try a restart. Same thing. And again. I'm on Lucid 10.4, no other OS installed, Toshiba laptop that up to now has had no problems with the last two versions of Ubuntu.
I installed opensuse 11.2 64bit on my external hard drive with the idea that this way the two OS would be completely seperate and I could just use suse when I felt like it. Everything boots fine for both OS when the hard driv is plugged in but when it is unplugged I can't get past a boot screen which says: Grub loading stage 1.5 Error 21 I have seen on another forum a fix using the windows install disk but I no longer have this. Is there some other fix I can use to make my laptop portable again.
When I boot I briefly see 'Grub loading...' then I get dumped in 'sh:grub>'. I can then boot up manually: linux (hd0,1)/vmlinuz root=/dev/sda1 initrd (hd0,1)/initrd.img boot
I'm very new at this, so all my attempts at correcting it has been through reading posts turned up by google searches. Previously, I was dumped at the grub_rescue> prompt (have another thread about that, but I think this is a new issue, so I'm hoping making a new thread won't bring any mod's wrath down on my head), but that seemed to solve itself through no influence of mine...
What I've tried to solve the 'sh:grub>' issue: In /etc/default/grub: I tried disabling quiet splash, in hopes there would be some lines that would give me a clue as to what is going on, but it jumps directly from Grub loading to sh:grub> I tried commenting out Grub_Hidden_Timeout and setting it to a positive integer. I tried uncommenting GRUB_DISABLE_LINUX_UUID=true In /etc/grub.d/10_linux: I tried commenting out 'if [ -n ${have_grubenv} ]; then save_env recordfail; fi'
Then I tried typing 'search -f /boot/grub/grub.cfg' at the sh:grub> prompt and got 'error: no such device: /boot/grub/grub.cfg' which I guess meant all my previous attempts were void as grub couldn't even find grub.cfg. I've tried to reinstall grub with 'grub-install --recheck /dev/sda'. Then I found this thread and tried out "grub-setup -r '(hd0,1)' /dev/sda", hoping it would point to my grub.cfg as well. No such luck.
I'm trying to install ubuntu from a CD. I believe it is version 8.4 The install seemed to go fine and I rebooted my computer and immediatly after start up I get a message that says: Grub Loading stage 1.5.
Grub loading, please wait... Error 18
I have no idea what this means or what to do and Im not the most computer savy guy. My computer is stuck and will do nothing at this point.
A few days ago I installed openSUSE 11.4 on a 1TB HP external hard drive. I have some very important files for school and personal work on my main hard drive, running windows 7, so I made sure the installation only affected my external hard drive. With the external hard drive plugged in it boots just fine but when it is un-plugged it says Grub loading stage 1.5. Error 21 and it won't do anything. This kind of pisses me off because there were no warnings and nothing was supposed to happen to my main hard drive. But this has already happened and now I want to know if there is any way I could fix it so I can boot windows 7 normally and still boot openSUSE with the external hard drive plugged in.
