Ubuntu :: Getting DOD Common Access Cards Working In 10.04
Aug 30, 2010
i have been trying to figure out how to get my CAC working on my laptop so i can log into service portal sites and do things while i am TDY that require CAC logins. I have followed this tutorial [URL], and i got as far as getting the module installed into firefox, but it wouldnt aknowledge my card being inserted and wouldnt prompt me to select a certificate or anything. Then i tried OpenSC, but for one it wouldnt acknowldege my card being inserted and the module wouldnt load in firefox.
I mainly want to use this for logging into AirForce Portal, DTS, and Webmail while im TDY so i dont have to find a GOV computer to do that stuff on. I would ultimately like to get it setup to where i can use my CAC to login to my laptop just like a Government computer, but if i cant do that right now i wont cry over it.
Im using a SCM SCR3340, i havent seen it on any supported hardware list yet, but so far coolkey and opensc have both detected my reader, just opensc didnt detect my card being inserted.
View 2 Replies
ADVERTISEMENT
Jun 4, 2011
I have installed php 5.3.6-4 on centOS 5.6. When i try to install some modules of php then it gives an error
php53-common-5.3.3-1.el5_6.1.i386 from updates has depsolving problems
--> php53-common conflicts with php-common
Error: php53-common conflicts with php-common
[code]....
I have reinstall it twice but each time i get same error.
View 6 Replies
View Related
Jan 20, 2011
I am trying to restore my desktop to how it was, what I assume is default. Some background. I am not new to computers but not an advanced user by any means. While very comfortable in Windows, with Linux I feel like I am trying to learn a foreign language by reading a translation dictionary. Most times things go right but when things go wrong I have no idea why. I am running Xubuntu on an ASUS 701. I installed it based on these directions:[URL]
By the way under Sytem Monitor I am told I am running Ubuntu 10.04 (lucid) Kernel Linux 2.6.32-27-generic GNOME 2.30.2. I'm not sure what all that means or if it is relevant. I have been thrilled 70% of the time. Twice I have had to do a complete reinstall because so far that is the only way I have found to fix it when things go bad. I am hoping that this time I can avoid that. This morning I installed Wine from WineHQ and followed the directions on this page: [URL] That didn't work so well for me. Somehow it took up 2GB of disk space, scrambled my desktop and Thunderbird no longer worked. I reinstalled Thunderbird but that resulted in losing my inbox I uninstalled Wine but can't figgure out how to free up 1 GB of installed applications, I'll ask about that in a sepatate thread. I have searched and tried all kinds of tips and tricks on fixng the desktop. Deleting /.cache. Deleting /.config. Nothing. My final attempt was following the intructions here: [URL] Still not fixed. I tried all of the steps. Previously I had a tab labled "Apllications" in the upper left hand corner. Next to it was "Places" Then a button for Firefox. The Shutdown door button was in the upper right hand corner. My battery status, network status and clock were to the left of the door.
View 1 Replies
View Related
Aug 16, 2010
I use a network-connected HP printer through hplip and cupsI'm trying to discover how to access the media card ports that are built-in on the printer. Q1: Is there some way that my linux workstations can mount or otherwise access these flash-media cards?If not, then,Q2: Does anyone know about a network-connected, shared resource, multiple format media card device?(My wireless router has a USB port for shared things, but I think
View 6 Replies
View Related
Dec 18, 2010
I installed 2 nic cards in my pentium 4 computer running rhel5 to be used as a proxy server and connect 2 computers in each network card for testing . The problem is I cannot ping or use the 2 cards simultaneously . One must be deactivated for the other to be ping . The Network configuration panel indicate both card status as active but i can only ping the first to be activated . I have already set onboot=yes to both cards but still the same result after restarting . The nic cards are onboard - Realtek RTL8139 and pci -3com 3c905b.
View 4 Replies
View Related
Aug 5, 2010
i had just went out and got some older blade servers and put ubuntu server on it and when i was installing it it asked if i wanted to set an ip because it didnt get a dhcp responce i said no then because i was going to do it later when i do a ifconfig now all i get is a lo interface but if i do sudo lspci i get 2 ethernet controllers and they show as follows 2:03.0 Ethernet controller: Broadcom corporation NetXtreme BCM5702X Gigabit Ethernet (rev 02) 2:04.0 Ethernet controller: Broadcom Corporation NetXtreme Bcm57j02x Gigabit Ethernet (rev 02)
View 3 Replies
View Related
Feb 1, 2010
I've been using wicd (1.6.2.1 was the latest version on my desktop computer, maybe it got updated) without any problems for a long time. This morning after switching the thing on to read the morning news with a nice hot cup of coffee I got a number of funny Gui system messages: Wicd needs to access your computer's network cards. Password
View 12 Replies
View Related
Mar 1, 2009
I have a fedora 10 box with two network card on eth0 I have a pppoe connection to the internet, on second card eth1 I share my internet connection end I set up a samba server but I don't know if the settings are good. How to do this settings right to work fine, the ip are assigned by dhcp I don't use any static ip .When I try to browse the internet from the other computers some site's like {.com ; .org ; .info} are block, other site from {.ro} are working. Someone tell me something about turn off all my filters, but I don't know where to find this filter to turn it off. And when I use samba I can't have and internet access or vice versa. My network look like that:
Code:
eth0
|<--pppoe connection
|
MyComputer
(fedora 10)
|
eth1
|
switch
|
comp.1 comp.2
Win OS MacOS
View 2 Replies
View Related
Oct 5, 2009
I'm running a Fedora 10 box behind a Comcast cable modem that provides squid and mail services to 15 XP and Vista workstations. I upgraded the ethernet cards on our Fedora box to support our new 1 gigabyte network. I kept the same device configuration eth0 and eth2 by updating the /etc/udev/net persistent file and changing the ethernet hardware address in the respective ifcfg-eht files in the /etc/sysconfig/network-scripts. The box booted to the new cards, the route and ifgonfig shows the new cards and their hardware addresses, the configuration looks as how the old cards looked (eth0 and eth2 respectfully). I was able to browse the local network and have access to the internet as before from inside the network . However I cannot get access to our web server that serves our web host and our VPN services from ouside our network. I tried stopping the firewall and still could nor connect from outside the network.Could my old ethernet hardware address be hard coded somewherel?
View 1 Replies
View Related
Mar 14, 2011
I'm trying to get ubuntu working w/ 3 monitors. I have been given 2 video cards
lspci | grep VGA
20:01:00.0 VGA compatible controller: ATI Technologies Inc RV620 LE [Radeon HD 3450]
25:05:00.0 VGA compatible controller: nVidia Corporation NV44A [GeForce 6200] (rev a1)
I have had it working w/ two monitors plugged into the ATI correctly. and the nVidia monitor blank. Now I have the nVidia monitor working and one monitor from the ATI working, but I can't seem to get the last monitor to show anything. It does show the boot screen and works up until the point you are presented w/ the login screen for ubuntu, then it disappears and the nVidia monitor turns on. Might I have something wrong w/ my xorg.conf or do I need to do something more to get this to work? Currently I'm seeing this error in my Xorg.0.log file, but I'm not sure where to go from here:
[ 24.746] (EE) RADEON(2): reusing fd for second head
/etc/X11/xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 270.29 (buildmeister@swio-display-x86-rhel47-02.nvid
[code]....
View 2 Replies
View Related
Dec 1, 2010
I have a dns server started with 2 NIC Cards in it. The bios sees both cards but they both dont show in ifconfig. is there a way to activate the second card?
View 1 Replies
View Related
Nov 30, 2010
I'm new to Ubuntu - I've decided to give Ubuntu Studio a go as an alternative to Windows. However, after installing it, neither of my network cards work. I have a Intel Pro Wireless 3945ABG wireless card, and a Broadcom Netlink Gigabit Wired card. Neither work, And I'm not sure how to. I've tried searching, and have come up with the .tgz file here, but I have no idea what to do with it I'm concentrating on the wireless card for the moment, seeing as that will be the main one I use.
View 4 Replies
View Related
Oct 11, 2010
This is a fact I have to share with you. I've tried it on liveCD version, and also have tried to fix the problem, but nothing worked. I even installed ndiswrapper, but the Windows drivers didn't solve the problem:
- the system sees the card (lspci)
- the card doesn't see any wireless network (iwlist)
- no command line manipulation helps (iwconfig, ifconfig)
Conclusion: the network manager is out of order.
View 2 Replies
View Related
Jul 17, 2010
below are the details of my system. I have bash as my current shell, some really common commands aren't working.
Do I need to do a re-installation of bash? Or how do I install a selection of bash commands which I need? (for example a subset of [URL])
Code:
root@sdptfw:~ # uname -a
Linux sdptfw.sdpt.co.za 2.4.36 #1 Tue Jul 22 13:13:24 GMT 2008 i686 i686 i386 GNU/Linux
root@sdptfw:~ # echo $SHELL$
/bin/bash$
[Code]....
View 13 Replies
View Related
Feb 25, 2011
I've installed Ubuntu Server 10.10 with two network cards. One for external, and one internal.My problem is that as soon as i activate eth1 (external), i can't access the server from the internal network (eth0)
With these settings i can't reach the internal network from inside.If i disable the gateway on eth1 and enable the gateway on eth0, it works.
View 6 Replies
View Related
Feb 9, 2010
I have a desktop computer running OpenSUSE 11.2 with two network cards installed. I would like to use both cards for connecting to the internet using different networks. The setting would be the following: eth0 is the main (default) card, almost all programs should use this NIC for connecting to the internet. eth1 is used only by a few programs, which have setting for selecting which network interface to use. The two NIC's are connected to different networks, so the IP address of the NIC's, the related subnet masks and gateways are also different.
Saying short, I would like to have the two NIC's as they would be in two separate computers. I can set the IP address and subnet mask of the NIC's. The main problem is that I can only declare one gateway. How can i setup this? I do not use network manager, I configure network cards using yast, but if needed I can of course use ifconfig directly.
View 9 Replies
View Related
Sep 4, 2010
I am using open suse 11.1 in my acer emachine laptop. Everything is okay except Network cards are not working. It says that firmware is missing or kernel problems. My network cards are Broadcom network cards. How can I fix it?
View 9 Replies
View Related
Oct 6, 2010
Todays update broke my display again. The windows are hanging off the left side of the screen.
Nvidia current correctly configured 1920x1080, xorg.conf seems ok too.
System - Administration - Additional Drivers shows nvidia current, but mentions that the driver is activated but not currently in use
How can I get Ubuntu to use this driver?
View 1 Replies
View Related
Apr 28, 2011
This guide isn't going to be updated anymore, as there is gNatty, and I've switched to Lubuntu. The reason? GDM kept crashing and issues kept coming up that reduced the overall functionality of my own computer. The PPA seems like it changes slightly to where things may break, if something does break, try to run: sudo apt-get install gnome-shell gnome-session again, as it looks like a lot of the time gnome-shell and gnome-session aren't being installed. FIX for issue opening certain applications (like games) Do the following in terminal:
Code:
echo "PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games"" | tee -a ~/.profile Logout and log back in and that should fix the issue. NOTE: You have to do this for each user that logs into the system if they can't access games or that. FIX for .ICEauthority issue! There's another method besides this one, and it involves just installing the following:
[Code]...
View 9 Replies
View Related
Aug 18, 2010
I recently installed Ubuntu (normal version) on to my netbook (Samsung N140) and I'm sharing my wireless connection over ethernet to my desktop using the method outlined in the Ubuntu wiki on ICS.
However, I do Ruby on Rails development, so run a local server on the netbook. I found out yesterday while working remotely that I cannot access 'localhost:3000' while I have no internet connection, and I get an error about 'sendmsg: operation not permitted' if I try to ping localhost. Likewise, I cannot access 127.0.0.1 the same way.
View 3 Replies
View Related
Feb 28, 2010
I am trying setup nfs mount points on my system. when i try to restart nfs-common servic, I get following error. client :~ sudo /etc/init.d/nfs-common restart bash: /etc/init.d/nfs-common: No such file or directory
apt-get install nfs-common gives this message :
apt-get install nfs-common
Reading package lists... Done
Building dependency tree
Reading state information...
nfs-common is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 1 not upgraded.what am i doing wrong? I'm running Linux client 2.6.31-19-generic #56-Ubuntu SMP Thu Jan 28 02:39:34 UTC 2010 x86_64 GNU/Linux (karmic)
View 2 Replies
View Related
Mar 1, 2010
In WinXP they have program_files folder that houses the most installed software on their PC's. Where does Ubuntu house most of it's installed programs?
View 1 Replies
View Related
Mar 22, 2010
I was looking for a converter to use on common avi files and maybe some others and came across this thread. I followed it all the way to where it asks me to install ConvertIt by adding the repos and then running Synaptic. I found convertit and marked for install and clicked apply and got this error:
Code:
convertit:
Depends: gambas2-runtime (<2.1) but 2.13.1-1ubuntu1 is to be installed
Depends: gambas2-gb-qt (<2.1) but 2.13.1-1ubuntu1 is to be installed
So i check synaptic for that and i had them installed already from the guide. So i marked them all for reinstall since i installed them in the terminal the first time. Reinstalled and i still get the same error.
Any idea whats wrong? Or is there a better movie converter thats easier? I just want to re encode the files so the will play on my 360.
View 5 Replies
View Related
Mar 31, 2010
I've only ever installed two programs that came in .tar.gz's with their own install.sh scripts. Each one recommended to be saved in /opt.What is opt? Should all .tar.gz programs with their script installer be handled in the opt directory?
View 6 Replies
View Related
May 9, 2010
I have this broken package nvidia-kernel-common, I don't have Nvidia HW andI'm using ATI.
I tried to remove/purge/install this package since I saw it was broken but without any help.
This is the output that I have:
Quote:
sudo apt-get remove nvidia-kernel-common
Reading package lists... Done
Building dependency tree
Reading state information... Done
[Code].....
View 2 Replies
View Related
Jun 1, 2010
I am running a fresh install of Lucid 64bit with Desktop effects enabled and the latest driver from Nvidia 195.36.24 (but had the problem also with the ubuntu repo driver. The issue can be reproduced as follows. Set AWN to group common windows (I believe this is the default) Open several gedit windows (or any other app) Then open firefox and maximize the window (or simply move the window so it's directly above your gedit dock icon.) In the AWN dock, select the gedit icon and try and select an open gedit window. When you click the gedit icon in the AWN dock, you'll see a popup with all of your gedit windows. If you move the mouse to attempt and select one of the gedit's, the menu disappears and you can't select anything.
View 1 Replies
View Related
Jun 18, 2010
It is hard to explain this using words. Suppose you have multiple OpenOffice documents open. Instead of spreading the OpenOffice documents out on the taskbar, I want to combine it into one. I want to select, which window I want within the OpenOffice documents group vertically.
View 1 Replies
View Related
Jul 8, 2010
I have received a file in CDF V2 format (.pub file extension).
Is there any software available to read this file in Linux (Ubuntu)?
View 2 Replies
View Related
Aug 10, 2010
I ran this line: aptitude purge x11-common and all common files, all the tools I need are gone from my desktop. I have an amd64 with ubuntu +gnome on it.
Is there a way to reverse this --other than installing 1gb of packages one by one?
View 3 Replies
View Related
Sep 13, 2010
I've just upgraded from ubuntu 8.04 LTS to 10.04 LTS.
During the installation I received the error message that tex-common could not be installed. After searching the forum and bugs, I found these
https://bugs.launchpad.net/ubuntu/+s...on/+bug/580881
https://bugs.launchpad.net/ubuntu/+s...se/+bug/228334
talking about dependencies issues, with the solution to first install texlive-base. I have now tried to remove all tex packages completely and reinstall them, starting with texlive-base, but I keep getting the same error. code...
View 2 Replies
View Related
