Todays update broke my display again. The windows are hanging off the left side of the screen.
Nvidia current correctly configured 1920x1080, xorg.conf seems ok too.
System - Administration - Additional Drivers shows nvidia current, but mentions that the driver is activated but not currently in use
How can I get Ubuntu to use this driver?
So i installed Ubuntu 10.10 did updates all was fine. when i went to activate the nvidia driver it install but upon restart i lost my GUI. I have a nvidia ion next gen graphics card. Running desktop 10.10 with intel atom dual core and 2gb of ram
NOTES:
1.) sudo service gdm start states that the gdm service is already running
2.) ctr + alt + f7 does nothing and along with that all the other alt + f keys do not have a GUI
3.) i can log in and use the OS via command line
4.) other things i have tried is the sudo apt-get install nvidia-current just led to the same results
I just installed Natty. Installed nvidia-current via synaptic. Then uninstalled nouveau via synaptic also. Back to Unity desktop, I chose Additional Drivers and activated "nvidia-current". However, after reboot, the info window says this driver is activated but not in use.
View 9 Replies View RelatedI have a geforce 8400GS and nvidia-current installed. However, the Additional Drivers app advises that "No proprietary drivers are in use on this system" and that the driver is activated but not in use. I know other people have complained about this problem, but for me this is breaking 3D content and I can't get compiz to work either. When I try to start compiz manually (compiz --replace), I get this error:
Code: compiz (code) - Fatal: Couldn't open display My Xorg has nvidia as device driver. I'm using the NVIDIA X Server settings program to setup my two monitors, so I know that this is what is in use. In addition to the compiz problem (which I can get over), sometimes I can see the desktop background through the active window. It's hard to explain so I'll take a screenshot when it happens again. Things I've tried:
1. Installing nvidia's latest drivers - The installer was extremely picky, constantly complaining about other modules and drivers. After I finally managed to remove everything it didn't like and install it, X wouldn't load.
2. Reinstall nvidia-current - tried multiple times with no change.
3. Link /usr/lib/xorg/modules/extensions/libglx.so to /usr/lib/nvidia-current/xorg/libglx.so.270.41.06 - didn't make a difference.
I have this broken package nvidia-kernel-common, I don't have Nvidia HW andI'm using ATI.
I tried to remove/purge/install this package since I saw it was broken but without any help.
This is the output that I have:
Quote:
sudo apt-get remove nvidia-kernel-common
Reading package lists... Done
Building dependency tree
Reading state information... Done
[Code].....
xserver-common (2:1.10.4-1) was upgrade today in Sid to xserver-common (2:1.11.0-1) breaking my nvidia driver (NVIDIA-Linux-x86_64-280.13.run). There is a temporary fix as showen below.
Section "ServerFlags"
Option "IgnoreABI" "true"
EndSection
Some problems do exist and downgrading may be a better option.
I need to look at bugreports at nividia but not sure how. LOL guess it's time to google.
After countless failed installs, and a memory and motherboard replacement, I finally got 11.04 working. So I then installed the latest proprietary Nvidia driver for the 7950 GT card in my desktop. Now I'm getting this (IMO) ridiculous Alice in Wonderland-esque message.
View 5 Replies View RelatedI have installed php 5.3.6-4 on centOS 5.6. When i try to install some modules of php then it gives an error
php53-common-5.3.3-1.el5_6.1.i386 from updates has depsolving problems
--> php53-common conflicts with php-common
Error: php53-common conflicts with php-common
[code]....
I have reinstall it twice but each time i get same error.
I'm trying to install the nvidia drivers but it is not working.
lspci | grep VGA
02:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX - nForce GPU] (rev a3)
My xorg.conf looks like this:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
[code]...
And after that my X is not working. And when i try sudo modprobe nvidia I get this:
FATAL: Error inserting nvidia (/lib/modules/2.6.26-2-686/nvidia/nvidia.ko): No such device
I can not get the Nvidia closed source driver to work..when i open the "Additional Drivers" it says that the driver is activated but not currently in use.
Another problem...I can not see my grub nor the Plymouth screen.
I am trying to get my new computer to work with the proprietary nvidia drivers, but unfortunatly I am having some troubles. When I activate the nvidia drivers in jockey and restart the computer, the DE fails to load unity, and no compositing is actually being done. When I check jockey, it says:
"this driver is activated but not currently in use" I have an NVIDIA GT 550M. I can use unity with nouveau, however there are some problems that I have noticed, like not resuming from sleep and some freezing, which I suspect is a result of the open source drivers(could be fixed in an update later). But does anyone know how to get the proprietary drivers to work in the mean time?
I've got an issue where my nvidia drivers won't activate, which is a fairly large problem on my Asus G60VX. The reason it bugs me most is because it won't let me use a second monitor while the drivers aren't activated.
Here's my issue.
Now, I already tried going into Synaptic and removing all NVidia stuff manually, and then reinstalling, but this didn't fix my problem.
I just installed natty today after erasing the previous maverick and windows dual boot.Everything works fine.But there is one problem .The propriety driver for Nvidia seems to be activated but not in use.I still get unity desktop,(couldn't get it before installing the propriety driver).I have tried removing and activating it again but it ended up the same again.I know that this problem has been encountered lot of times,but I searched everywhere and didn't find anything.
View 9 Replies View RelatedBus 001 Device 002: ID 0846:9040 NetGear, Inc.So I think it's correctly recognizing it, but for some reason it won't identify it as a wireless USB NIC. I'm trying to install without a wired connection (several rooms away from a wire, and this is an old tower), so any help there would be nice, if not, then any advice on what to do when I get it hardwired would be nice. I have the Live CD to try this with. I also have a second CD/DVD, and have it installed/working on XP on the box (which after I get wireless working I'll be replacing),so I have the .inf file if anyone can direct me to using ndiswrapper for it. Let me know what else you need to know.
View 2 Replies View RelatedSystem-->Admin-->Hardware Drivers States my STA driver is activated, but not in use... ug. having so many wireless issues with 10.04 i've been pulling my hair out for a week now. I assume this is why it says my network UNCLAIMED as well.
View 9 Replies View RelatedHaven't been able to boot here lately. Installed Lucid Lynx via Wubi. Tried reinstalling grub, with no avail. Tried using Lilo and now it says I have no activated partitions. I can only boot if I use a LiveCD or Super Grub Disk to find my Windows XP Loader. Here is my results.txt from the boot info script:
[Code]...
Recently the menus in Firefox will no longer drop down when I click on them. I also can't activate them by using the keyboard shortcut.
View 4 Replies View RelatedA friend of mine is running Ubuntu. He used to run Windows XP, but he kept destroying it completely, and I soon got tired of fixing it for him. So I setup Ubuntu, and we're both happier people for it.BUT! The other day he asked me to setup a VPN (PPTP) connection to his workplace, which I promptly did. It also just works, except for one minor problem: When he fires up the VPN connection, I lose the ability to connect to his computer over SSH. As soon as he shutdown the VPN connection, I can once again log in over SSH.I use the SSH connection for basic maintenance and for tunneling port 5900 so I can assist him over VNC.
His nic is setup with DHCP. Gateway is 192.168.57.1. Port 22 is NAT'ed to 192.168.57.2, which is the IP his computer is assigned by the router (it's reserved to his MAC address).
When he connect the VPN, a new interface is created with the IP 192.168.1.32. I'm very much _not_ a network expert. I can manage the very basic stuff, but beyond that I'm quite lost.
as the majority of ubuntu 10.04 users I had problems with setting up wireless internet connection too. After reading many forum topics I somehow managed to set up the connection.Now the only problem is that when I restart computer wireless connection is no longer working. Each time I boot Ubuntu I have to go to System>Administration>Hardware Drivers, remove Broadcom STA wireless driver and then install it again. Otherwise the wireless connection is not working and under Broadcom STA wireless driver this message is written:
View 2 Replies View RelatedSome times when I start up I get this theme activated and used. The only way to get rid of it totally is to restart. How can I stop this?
View 9 Replies View RelatedI'm going to start with Gen'l Help then maybe slide over to security. Twice recently, when shutting down for the night, I've noticed a Guest Session has been activated on my system. Since I'm the only one using this machine, I'm naturally curious. Can anyone out there explain how Guest Session works and if it can be activated remotely... or otherwise explain how the check mark next to "Guest Session" might be activated?
View 6 Replies View RelatedI've been into Linux since about 6 months, & I love it. Thanks to everyone....
Anyway, Due to the bad habit of windows habits, I've many Desktop Icons on my Desktop.
I ALREADY KNOW HOW TO HIDE THEM. I know both the ways for hiding them...
BUT, the problem is, whenever I hide Icons, the desktop RIGHT CLICK DROP-DOWN MENU goes too!! There's no right click menu then.
But as soon as I activate SHOW DESKTOP ICONS, the menu comes back... Pretty obvious why. But how can I prevent it???
I need HIDDEN desktop icons, ALONG with DESKTOP RIGHT CLICK MENU.
SO, my dear fellows, please enlighten me. WHAT SHOULD/CAN I DO?
I bought Sony vivo c series laptop and I tried to install ubuntu 10.10 version on it.After installed ubuntu the ethernet device was not activated. But It's working fine with wireless network. Similar problem I faced with older version 10.04 also.
Then, I tried with newer version 11.04. It detected Ethernet device.After installation over I just rebooted and I have chosen ubuntu OS, then it stuck and goes to blank screen.I am doing all my work in ubuntu only, i am struggling to recover form this problem for a long time.
System Information:
Model :VPCCA15FG/B
Processor : Intel(R) Core (TM) i5-2410M CPU @ 2.30GHz
RAM : 4.00 GB
System Type : 64 bit
Network Adapter : Atheros AR8151 PCI-E Gigabit Ethernet Controller (NDE 6.20)
Display Adapter : AMD Radeon HD 6630M / Mobilie Intel (R) HD Graphics
I loaded open suse 11.2 from download nothing works, an error comes up kde nepomuk not activated. And I cant do any thing in yast2, everything comes back to the error.
View 5 Replies View RelatedI activated a bunch of fonts through FontMatrix, which is a font manager I installed from the Ubuntu Software Center. The Font's were then available to me in inkscape, and a bunch of other programs. Now however I wanted to use some of those fonts in OpenOffice Impress (Presentation), but OpenOffice didn't seem to list the fonts.
Does anyone know how I can solve this. I'm assuming that one of two things is happening. Either OOo is not following the symlinks that are present in the .fontmatrix directory, or that openoffice is hard coded to not read fonts from any directory other than .fonts.
Can the screen saver be activated after system supend to ram?
View 1 Replies View RelatedI was trying to get the b43 driver work with my broadcom bcm4322 wireless card. I changed the kernel from 2.6.32 to 2.6.38 in order to make the b43 driver to work. When I booted with the new kernel the internet stopped working so I looked for a solution. I don't remember which website I went but it said that I have to re-install the STA drivers so I did that and rebooted and nothing happened. I decided to go back to the 2.6.32 kernel and re-installed the STA drivers. The wireless card (eth1) isn't showing when I run the command iwconfig
Code:
xavi@xavi-laptop:~$ iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
easytether0 no wireless extensions.
xavi@xavi-laptop:~$
I'm currently running Ubuntu 10.04 Lucid Lynx
i followed a tutorial and i used NDISWRAPPER to install the windows drivers and my device WUSB300N (wireless network card) worked perfectly. Once i rebooted however, the drivers are still installed but not activated if you get me? so the wireless card is just not read by the operating system.
View 1 Replies View RelatedHere is the output of lspci -v on a dell xps laptop I got today:
Network controller: Intel Corporation Device 008a (rev 34)
Subsystem: Intel Corporation Device 5325
Flags: fast devsel, IRQ 17
Memory at f3b00000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel modules: iwlagn
im using opensuse 11.2 with kde and im having problems to use desktop effects differents from those default ones. For exemple, I cant enable the desktop cube! i check the box and click apply.... but nothing changes, even restarting the system. Maybe my graphics card is not working well..
View 9 Replies View Related