I used StartUp Manager in Linux to change to "0" the time GRUB shows the "Select OS screen" now I'cant choose which OS I want to boot. Since WinXP is selected as the default OS, I can only log into Windows.
I've already tried to press the UP ARROW several times when the machine starts up but has no effect and the GRUB selection screen won't show up (This used to work on a desktop PC with GRUB and dual OS's). I'm on a laptop, is there any way to get to the GRUB select OS screen again?
I just installed 10.04 and for some reason once the grub screen loads and I can pick what I want to launch (regular kernel, or rescue mode), it attempts to load and then I just get a blinking cursor. I've found that I can't load the live CD either unless I use the nomodeset flag. I read in another post that this problem should be fixed by editing the /etc/default/grub file to add the nomodeset flag, which I did via nano. However, the file also says you must run update-grub after you edit the file. I tried this and it said something like it can't find / (is /dev mounted?) The hard drive itself is mounted, so I don't know why /dev wouldn't be mounted. How can I get this problem solved so I can boot to 10.04 successfully from the hard drive? (I'm typing this from the live CD right now).
Basically I had windows 8.1 running on my fujitsu lifebook A532 laptop and wanted to dual boot kali linux alongside it, however upon installing the linux it deleted EVERYTHING! on my laptop, the grub bootloader only showed kali linux to choose from...
I then decided kali linux is too complicated for me and decided to delete everything and reinstall windows 8 again however I was surprised that my bios screen looks diffrent also I can not edit the boot sequence.
If I press f2 or f12 it takes me to a screen with a tab named Boot menu and its written on it debian and every time I press enter on it it takes me back to this same screen...
Searched around but have not found this problem listed. I have upgraded my 9.04 installation by doing a new install of 10.04 and keeping my /home partition. I have a dual boot system with Win XP and an older version of ubuntu on another partition.The problem is that when I get the grub menu I cannot select anything other than the top option. Arrowing down it just keeps popping back up to the top option. I can hold the arrow key and it will go down through all the selections but just pops back up to the top if I let go.
If I press "e" to try and edit in order to manually select a drive to boot to the editor comes up and I can select up and down the lines but if I try to move the cursor to the right it just snaps back to the beginning of the line.So I can't select windows XP or my old Ubuntu install, I can only boot to the new 10.04.$ grub-install -vgrub-install (GNU GRUB 1.98-1ubuntu6)
I just upgraded to Ubuntu 10.04 from 9.10. Under 9.10 I dual booted to Ubuntu or Vista in the grub menu. Now that I have upgraded I cannot boot to Vista. When I select the Vista option in the Grub bootloader it restarts the computer and comes back to the grub menu screen again. I have run the boot_info_script. The results are:ot Info Script 0.55 dated February 15th, 2010 ============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in partition #5 for /boot/grub. => Grub 2 is installed in the MBR of /dev/sdb and looks on the same drive in
I'm a long time reader, first time writer. I have a question. I've been trying to do a dual boot with XP Pro SP2 and Ubuntu 9.10. When I setup everything and try to pick which OS I want to load, the GRUB freezes and won't boot/let me select anything else. I have to turn it off and then back on to only select Ubuntu or let the time run out to automatically select Ubuntu. I've got a Compaq Presario 2105 w/80gb HDD, 433.2MiB, and an AMD Athlon XP 1800+ Processor.
I'm using Karmic with Grub 2 (1.97b4) I have this strange problem going on and believe it might be a bug so if no resolution will file it on Launchpad. Whats happening is this:when I installed Karmic fresh a couple of months ago I never did anything with customising the Grub splash screen. I just stuck with the boring black/white and if I wanted to got to Memtest or my little used Win XP partition would just hit the down arrow when the Grub Splash appeared and go there.A couple of days ago I decided to add some custom colors to the splash screen as outlined in the Grub 2 documentation. I did this to both my desktop (Acer Aspire L100) and my laptop (Compaq) Everything looks fine except for one thing. On the desktop if I hit the down arrow (or any other key) it immediately boots the first option which of course is Karmic. It should have paused the timer and allowed me to scroll down. What this means is I can only boot Karmic at this time. This is only happening on the desktop!
I have installed KDE as my desktop, I have managed to get XMBC working from KDE. At times it would be nice just have XMBC load automatically from boot up. I know that its possible to have XBMC load as the Desktop Enviroment.
Is it possible to have something like this setup for Grub?
1 - openSUSE - KDE (Default) 2 - openSUSE - KDE (SafeMode) 3 - openSUSE - XMBC 4 - Windows XP
If so is it also possible to get more fancy and have KDE goto a login screen and XMBC auto login?
I installed Ubuntu as a dual-boot system with Windows XP very carefully. Unfortunately, though given the option to boot Windows at the grub menu, when I select it, I get an error. Booting Ubuntu on my other partition works just fine, no issues.
I also attempted to access files from the first partition in Ubuntu using gparted, but once I mounted it, all of my files were not present. I only saw manufacturer files, and many files and folders I didn't recognize.
Also, as an aside, my laptop monitor is suffering from occasional black-outs during use. Ubuntu gave me a little toolbar flag, telling me to go to a website and use the patches given to fix it, but I'm not quite so sure where to input the given patch text. Do I really need to go through the trouble of finding the source code, etc., or is it more simple?
I know that there is a nice little launcher that will run the script for Grub to select a menu option upon shutdown for a reboot [URL]
I however would like to use this from Windows XP and have grub select menu item 2 during a reboot. Does anyone know if there is any way to set Grub commands from within Windows?
I have a dual boot system (Linux and Windows) that I normally run headless and which boots by default into Linux (which is what I use mainly). This all works fine, except that on occasions when I want to boot Windows I have to plug in a keyboard and monitor just to select Windows in the initial grub boot screen. I'm wondering if there is an easier way to do this ? I don't mind if I have to boot Linux first, I just want to be able to reboot into Windows occasionally without having to plug in any peripherals.
I have an arbiter which determines and manages a lab. I am wondering if it's possible to remotely control the grub boot selection. Right now I have to wait for the nodes to boot, check the hostname and then rsync the new grub configuration and reboot the node, it's VERY timely so I am wondering if there is an alternative to this method?
my Setup is Fedora 14 x64 + radeon hd 4830 i've downloaded .run package from ati site with latest driver for x64 systems. installed it, but didn't edited grub.conf becouse i didn't understood anything there (probably didn't spent enough time to get things understand) Now i've lost possibility to enter my Fedora system. during boot it lost it's modern blue boot screen (with filling drop), it was replaced by standard old boot screen with triple-color stripe. after this boot screen monitor start blinking going on and off. and on last step i'm getting "Fedora 14 boot bla bla bla something" on screen. nothing works except Ctrl+Alt+Delete. system reboots showing successful daemons shutting sequence. How can i edit grub menu from initial grub screen is it possible to it's own 'e' option or 'c' from grub command line?
I have installed Windows 7 and Debian in my Laptop. The problem is that when I get to the Grub Menu, If I select Windows 7,and then I turn off my pc, Grub dissapears and I can't no longer enter any OS. Every time this happens I have to re-install the Grub through a live CD. (This doesn't happen if I use Debian, but sometimes I must enter Windows to play games or anything like that hehe)
I have just installed Ubuntu on a machine that has an ATI Radeon 3450 video card installed. If I boot the machine into recovery mode and then select 'normal boot' at the pause I get to a fully functional desktop that is using the fglrx driver. Compiz is happy and my graphics look great. If I boot normally and just let the machine do its own thing I get just past the 'select' screen and the machine stops. There is no further disk activity and the monitor goes into standby mode. I can't see anything relevant in any of the log files.
I have done a fresh install of Ubuntu 11.04 on my oem intel machine.After the installation,the screen resolution is stuck at 800x600.I am unable to select a higher screen resolution.
I dual installed ubuntu and windows vista side by side, and when it boots up, my monitor comes up with an error saying to change the resolution and timing (60 hertz) When I press enter, ubuntu loads, but I have to use windows for some tasks () such as opening quickbooks files. How do I change the resolution and timing of GRUB?
When I attempt to install the OS on my PC, the install software crashes immediately after I select US-English on the first screen. I'm copying the entire error report below. My system is configured as follows: Gigabyte P35-DS3R motherboard with 4G RAM. (FYI, I'm using the 32-bit LiveCD just because I may need a 32-bit OS for some purposes. I know this means I may not be able to use all of my RAM.) There are 3 500G hard drives connected to the computer. /dev/sda and /dev/sdb are RAID-1 mirrors via the on-motherboard ICH9R RAID chip. The logical partitions show up as /dev/dm-1, /dev/dm-2, /dev/dm-3, /dev/dm-4, and /dev/dm-5. When I type `fdisk -l`, I can see sda, sdb, and dm-* all separately. (I can provide the full output of `fdisk` if anybody wants to see it.)
/dev/sdc is a standalone drive without RAID.
I want to install Fedora on /dev/dm-2 with swap on /dev/dm-5. Currently, /dev/dm-1 and /dev/sdc2 each contain a separate installation of WinXP. I suspect the problem is with detecting RAID, thus I have deleted most of the error report that doesn't seem to concern storage detection.
I'm running an Acer 1810Tz, dual boot with win7.Under 9.10 and Grub I had no boot issues, however I have just completed the upgrade to 10.04 and upgraded GRUB to GRUB2.Everything boots just fine into Ubuntu, and my GRUB menu looks right, but when I select the Windows 7 option, the machine just hangs with a black screen, white cursor top left. I'm sure this is a trivial problem, something overwritten that shouldn't have been perhaps, but I have no clue where to start.
I am having trouble getting grub to automatically boot into ubuntu server. When I turn on my server the grub menu shows up and shows me the choices. They all work fine except that grub wont automatically select one. This wouldn't be too much of a problem but this is a headless server and I can't boot into ubuntu without a keyboard. I tried looking through the grub 2 documentation but nothing seemed to work when I edited the conf file.
I have been using Ubuntu for a few days and it keeps on surprising me: This morning when I turned my pc on instead of displaying list of available OS versions GRUB just prints out "[ Minimal BASH-like line...." and console with prefix "sh:grub>". Why is the list gone and how can I get it back?
I have a new netbook - "Eee PC 1005PE-PU27-BK" and installed Ubuntu Netbook Remix 10.04, Kernel Linux 2.6.32-24-generic. I love Ubuntu, but I also want to be able to access Windows 7 if I can. I've read some on GRUB, but the menu on startup isn't showing my Windows 7 instance. I've tried reinstalling GRUB, but when I run sudo update-grub, I still get this:
Code: Generating grub.cfg ... Found linux image: /boot/vmlinuz-2.6.32-24-generic Found initrd image: /boot/initrd.img-2.6.32-24-generic Found linux image: /boot/vmlinuz-2.6.32-21-generic Found initrd image: /boot/initrd.img-2.6.32-21-generic Found memtest86+ image: /boot/memtest86+.bin done
I know that Windows 7 is still on the system, I just can't access it.
I installed it from a cd and it wouldn't work. (froze in the process). I then tried to install it through windows wubi and that didn't work (wouldnt boot) since I was unaware it was a known issue and thought it was me doing something wrong I uninstalled it,reformatted the hard drive and tried to install via a cd again this time it fully iinstalled but when I rebooted it tells me unable to mount drives and a shell will be shown.
in the end I have no files on ubuntu so I would like to clean up all reminance of the previous installs and be able to use a working install. since I have been installing and reistalling for the better part of 8 hours.Yexcuse the post sloppiness using my phone)
So when i boot up into grub why dose it show 2 versions of ubuntu something like this
Ubuntu, with linux 2.6.32-22- generic Ubuntu, with linux 2.6.32-22- recovery ubuntu, with linux 2.6.32-21- generic ubuntu, with linux 2.6.32-21- recovery
I've had two students report a problem whereby Ubuntu does not show up as a menu option in Grub. Both systems used Wubi installations of Ubuntu 10.04 Desktop for x86 on Windows XP. In both cases, Ubuntu completed the installation process. Upon reboot, we have the options to choose between Windows XP and Ubuntu. However, once we enter into Grub, only the Windows XP option shows.
I just reinstalled Ubuntu 10.04 (I was running it wubi but various issues prompted me to install it in a separate partition) and now windows isn't an option in the GRUB. I have windows Vista on /dev/sda2 and I can see it on GParted.
I tried looking through some of the other posts, but I think that I need some direct help with this one. I have tried update-grub and nothing changed.
I don't use Windows often, but it is nice to have the option.
I have a dual-boot setup with Windows 7 and Ubuntu 11.04. Each OS is installed on a separate partition of one hard drive. I read that installing Windows after installing Ubuntu wipes out Grub, so I made sure to install Windows first. Unfortunately, after completing the Ubuntu install and rebooting, I see no sign of the Grub menu. I followed several sets of instructions for reinstalling Grub, and after running grub-update, it appears that Windows 7 was added to Grub, and after examining the grub.cfg file, it appeared that that was the case. Despite appearing to be installed perfectly once inside Ubuntu, Grub doesn't show anything at startup. No matter what I try, I can't seem to make Grub appear, and now I can't get back to Windows 7. Am I missing something, or should I try a different bootloader?
I'm currently running Karmic 9.10 in dual boot with Windows 2000. My computer has automatically updated and installed kernels 2.6.31-17, -19 and -20 (They show up in Synaptic as installed).
However, the newest kernel choice in my GRUB menu is 2.6.31-16-generic (followed by -15 and -14). These all start without any errors.
Question: Why haven't the newer updates shown up in GRUB for booting purposes?
Could it be a question that I didn't answer correctly some time back about accepting or not accepting an update or change in GRUB?
How can this be changed? The new kernels do not show up in Start-Up Manager either.
just tried downloading the latest version of ubuntu and install it on my laptop got an error message at the end of the installation (an I/O error, dev sr0,sector something) now when booting i got grub rescue. the only command working are ls and set. commands such as 'linux' or 'boot' show 'unkown command'
typing ls (hd0,1) or ls /boot/ results in unknown filesystem
I tried to reinstall grub using the 3 different methods as in [URL] got no error message while doing so except when typing sudo grub-install --recheck /dev/sda it told me something about being unable to locate ubuntu or something along those lines - sorry i thought i'd remember .. running out of option is there a possibility to download the latest pre 10.04 stable version?
