I'm trying to update Karmic to Lucid. I try to update Karmic to the most recent update before I upgrade I get this error.
W: GPG error: [URL] karmic Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 5A9A06AEF9CB8DB0
My software sources some how got screwed up. Now when I try to install from software manager or Synaptic, I get error messages. Here is the error messages at the bottom of "sudo apt-get update" :
W: GPG error: http://archive.ubuntu.com lucid Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 40976EAF437D05B5
W: GPG error: http://archive.canonical.com lucid Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 40976EAF437D05B5
How do I fix this ?
I use Ubuntu 9.04. Synaptic Software Manager > Repositories > Reload. I have a following error.
GPG error: [URL]... karmic Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 7804AF9D95075E6E. What can I do?
What does this lot mean:?
Code:
Hit [URL]
Hit [URL]
Hit [URL]
Fetched 557kB in 2s (198kB/s)
Reading package lists... Done
W: GPG error: [URL] Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY EA8E8B2116BA136C
W: You may want to run apt-get update to correct these problems
(after typing apt-get update)
When I try to install things I am getting lots of errors.
[code]...
What can I do to fix my problems? I also included a screen shot of the repositories in Software Sources. I been messing with BeachBit as Root and been toying with Ubuntu Tweak and so I think I messed something up on accident. Here is my list that I have too.
[code]...
Some index files failed to download, they have been ignored, or old ones used instead.
All the places online said to do this script - sudo add-apt-repository ppa:hel-sheep/pastie && sudo apt-get updatesudo apt-get install pastieAnother had a sudo upgrade in the middle, but essentially just that script above. Whenever I do that, my terminal hangs at -Executing: gpg --ignore-time-conflict --no-options --no-default-keyring --secret-keyring /etc/apt/secring.gpg --trustdb-name /etc/apt/trustdb.gpg --keyring /etc/apt/trusted.gpg --primary-keyring /etc/apt/trusted.gpg --keyserver keyserver.ubuntu.com --recv 8B9B7F6B51298512D6B5A8993B9ADE3DE4CA452gpg: requesting key DE4CA452 from hkp server keyserver.ubuntu.comEventually I crtl c and it looks like its installing, but then stops and says -W: GPG error: http://ppa.launchpad.net maverick Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 93B9ADE3DE4CA452
View 3 Replies View RelatedWhen I go to the Update Manager to update my system I get the following error message: W: GPG error: http://packages.medibuntu.org lucid Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 2EBC26B60C5A2783
I am not sure what this exactly means and what I need to do to fix this.
I'veopenoffice.org 3.0. I tried to upgrade it to oog3.1 via terminal by the command sudo apt-get update && sudo apt-get install openoffice.org 3.1 my terminal shows; the lines above these are not shown W: GPG error: http://ppa.launchpad.net intrepid Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 632D16BB0C713DA6 W: You may want to run apt-get update to correct these problems Reading package lists... Done Building dependency tree Reading state information... Done E: Couldn't find package 3.1 I got the same results when I tried the commands with firefox 3.5.
View 2 Replies View RelatedWhen I try to do
[code]...
I've tried the method described here: [URL]... However, I'm still getting the same error.
Why everytime I send apt-get update I got this error on the last lines? Reading package lists... Done W: GPG error: [URL] Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 8F91B0E6C862B42C Here is my /etc/apt/sources.list
[Code]....
After not having used Ubuntu for a few months now, I want to make up a new LiveCD and possibly a bootable USB. The times I have done this in the past, the installations don't include recent updates which need to be downloaded and installed once the system is running. (Understandably)
Two questions:
1) Does Ubuntu update the downloadable ISO periodically to include recent updates?
...for example: Now that it is January (ie. some 3 months after release of Karmic in October '09 and some 200-300Meg+ of updates required since that time), will I be downloading an ISO from Ubuntu that has recent updates already as part of it, or will it still require updates to be downloaded and installed once Ubuntu is running on the computer?
2) If the downloadable ISO has not been updated since Oct '09, is there a way of making a LiveCD/bootable USB that has up-to-date updates already installed? (if you know what I mean?) ....and is this process relatively simple?
I'm running ubuntu 10.04 (via wubi-installer) on a lenovo g560. I was quite comfortable on ubuntu and thought about switching from win7. I was proud, because i fixed a problem (almost) myself. My speakers and headphones were playing sound simultaniously, so i followed this solutionsNow i lost my faith: Since yesterday, my sound is totally gone. I assume, this problem appeared because of some recent "updates" i blindly accepted. Now, i have no idea where to start...aplay -l: "no soundcard found..."lspci -v: i seem to have two soundcards:
Code:
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
Subsystem: Lenovo Device 38af
[code]....
My system has Ubuntu and Debian (Squeeze) on it.I don't want to have to boot up Debian in order to get the recent updates.Is there a way to do this from Ubuntu?
View 2 Replies View RelatedI was quite pleased to see that Ubuntu 11.04 now loads and reads the contents of my iPhone 3GS.
(Once I connect the phone to my netbook, Shotwell and Banshee would recognize the cell-phone and give me options to manage my data.Alas, that joy has been very short-lived. As of the most recent updates, something appears to have 'broken' this functionality. [TODAY's DATE: Monday, 30 May, 2011],
Now when I connect the phone Nautilus fails to mount it, and I consistently get the same error message:
"DBus error org.freedesktop.DBus.Error. NoReply:Message did not receive a reply (timeout by message bus)"
Anyone else notice that the recent updates have trashed Swiftfox? Here's the error message: Quote: MozPlugger: Error: Too many types (32) for handler 22 (application/vnd.sun.xml.writer:sxw:OpenOffice Writer 6.0 documents)
Opera, Seamonkey and Firefox all work fine and if I open Firefox and then open Swiftfox, it's working just fine, so apparently FF handles the OpenOffice, etc., issues for it. It still fails if you have opened Seamonkey or Opera first.
Is it possible to update a Live USB so that way when you use it to install to another computer it will install with the most recent updates? I want to install Lucid to my sister's computer, but it doesn't have internet so once its installed it's never getting updated again.
View 9 Replies View RelatedI am running sid. A few days ago I ran an update which killed 3D. I followed this thread to get 3D support back. However I failed to hold those packages so I suspect a subsequent upgrade undid all that work. Now what is happening is that I do not have X starting at all. These are the relevant nvidia, mesa and xserver files installed
ii libgl1-nvidia-alternatives-ia32 270.41.19-1
simplifies replacing MESA libGL with GPU vendor libraries (32-bit)
ii libgl1-nvidia-glx-ia32 270.41.19-1
NVIDIA binary OpenGL 32-bit libraries
ii libglx-nvidia-alternatives 270.41.19-1
simplifies replacing Xorg module libglx.so with GPU vendor library
ii nvidia-installer-cleanup 20110515+1
Cleanup after driver installation with the nvidia-installer .....
Yet when I run lsmod I get:
nvidia 10710970 0
i2c_core 25601 14 adt7475,nvidia,tuner_simple,tda9887,tda8290,tea5767,tuner,cx8800,cx88xx,i2c_algo_bit,tveeprom,v4l2_common,videodev,i2c_i801
I am missing something obvious in all of this.
xserver-xorg-video-nvidia:
Installed: (none)
Candidate: 275.09.07-3
Version table:
275.09.07-3 0
[URL]
If anyone else is having problems with their HP Photosmart (c4580) multifunction after the latest updates, here's what I did to get mine working once again -
1. Uninstalled hplip (ALL versions including standard AND packman), this also automatically uninstalls hplip-hpcups (which seems to be the cause of the problems) and automatically re-instates hplip-hpijs instead.
2. Remove all installed printers in Yast and also check on http://localhost:631 to make sure they are all removed.
3. If you have (as I did) lots of annoying test pages spooled and waiting to be printed, reboot now to (hopefully) get rid of them.
4. Disable your firewall (through yast) and add allowed service - cups. You might want to restart it, but to save time/frustrations/headaches/smashing your computer and printer out of frustration I would leave it disabled until you have successfully achieved a test page printout!
5. Download hplip-3.9.6b.run from here - HP Linux Imaging and Printing and follow the install instructions. It should eventually bring up the GUI interface where you can detect your printer.
5a. If it doesn't find your printer in the scan, then you are most likely going to have problems. Make sure your firewall is disabled/allowed and that the printer is actually reachable (ie by ping or the web interface). If still not reachable, then you need to find out your printer's IP address and enter that in a browser and get it's hostname.....
where I can find a list of Fedora 9 kernel updates (i.e. the updates that come through yum update) along with the dates they were released? I'd like to know when the last kernel I have installed (2.6.25.14-108.fc9.x86_64) was publicly released.
View 4 Replies View RelatedI did a yum update to install quite a few updates to my Centos 5.3 x86_64 system. Updates included kernel and xen which required a reboot. It must be a month or so since I last updated. The updates seemed to go fine - but when the machine restarts it goes through the bios screens which seem to detect all the hard drives etc - but then the word "Grub" appears at the bottom of the bios screen - and the system hangs. It doesn't appear to respond to keyboard input. The system is using linux raid in case that is relevant.
I am able to boot a centos5.2 live CD and look at the Logical volumes - and all appears in order to my untrained eye. I have also mounted the /dev/mdo as /tmp/bootx (boot volume) and had a quick look at /tmp/bootx/grub/grub.conf and /tmp/bootx/grub/device.map and again - I can't spot any obvious problem. I note that before the updates - my default boot was "1" and now it is "0" though this appears reasonable because the xen and non-xen images seem to be listed in the opposite order to earlier updates. I have set it to boot non-xen by default - and this has always worked in the past.
I realise that the recent updates may be a coincidence - and whatever is wrong may have occurred earlier. I cannot think of anything I have done which could have broken grub though. I can probably restore my boot volume to the state it was before the updates. I should have a backup from this morning - as luck would have it. Is this a safe thing to do - or do I need to restore both boot and root to keep them consistent. I would prefer not to restore the root system unless I have to - as this would cause some data loss. However I need advice as to whether yum and other things will get confused if the boot volume is restored in isolation.
I have a machine with a fresh install of fc14. When I first created the machine about 3 weeks ago I could attache my iPhone 3GS and FC14 (gnome) would detect it and I could use shotwell and rhythmbox fine. Ya!
Now as of about 1.5 weeks ago, when I plug in my phone I get a pop up with : Unable to mount Brian's iPhone DBus error org.freedesktop.DBus.Error.NoReply: Message did not receive a reply (timeout by message bus) dmesg doesn't show any errors, just that an iPhone was attached. Is this just me or are others seeing this? Any ideas as to what might be wrong?
Compiz seems to have had a bug where, upon using Compiz as the window manager, the mouse cursor would refuse to properly change after selecting a new theme. The workaround (altering the index.theme in/usr/share/icons/default) used to be a way around the issue... that is, until the latest Nautilus updates. Now even that won't let the cursor change, and I'm stuck with the issue of a Bluecurve cursor inside applications, but the default dmz-aa cursor on the desktop. Has anyone else found a way around this bug?
View 1 Replies View RelatedI have been running my Canon Pixma MP460 for years on suse linux. Worked fine also after upgrade to suse 11.4. I was running MP460 using MP160 drivers as per some forum information when 460 drivers were not available. Some recent updates, however, have killed operation of my printer. Will not even print a test page. I have tried my old MP160 driver and variations of same and new MP460 drivers from CUPS-Gutenprint.
Consistent error message is: "The PPD version (134566257) is not compatible with Gutenprint 5.2.7."
I downgraded and upgraded CUPS. I have deleted and reinstalled many printer drivers for MP160 and MP460. I have run the "cups-genppdupdate.5.2" per the error log message and other cups update programs in the same directory. Keep getting same message. Printer works when I reboot to windows 7 so hardware has not failed.
System is: Suse 11.4 32 bit w/usb mp460 printer.
Hate to bid farewell to my old faithful printer.
There have been no updates recently (for almost two months) on any of my CentOS 5.5 boxes when I run 'yum check-update'. I may be misunderstanding the repo setup, but looking at the file mod dates, it seems that there hasn't been an update since 2011-01-06:[URL]...Meanwhile, a prominent North American Enterprise Linux vendor has had multiple security and bug fixes since then:[URl]...Is CentOS 5.5 still getting updated, or am I missing something (quite possible).
View 12 Replies View RelatedI have a GnuPG key that's been signed by several people. I want to add another name (and e-mail) to it.I used seahorse to do it, but it doesn't look like the old signatures migrated to the new name.Is this standard behavior? Is there a way that I can migrate the signatures, or do I have to request that the signers themselves do it?
View 1 Replies View RelatedI have a GnuPG key that's been signed by several people. I want to add another name (and e-mail) to it. I used seahorse to do it, but it doesn't look like the old signatures migrated to the new name. Is this standard behavior? Is there a way that I can migrate the signatures, or do I have to request that the signers themselves do it?
View 1 Replies View RelatedI recently enabled autologin on my linux distro, now during login network manager needs to have a password entered before it will load. How do I set it so that I don't have to enter the password every time?
View 1 Replies View RelatedIs there a way to make Clam update the signatures automatically? I cannot see an option in Clam TK.
View 1 Replies View RelatedI was doing an update today and got the following error:
W: GPG error: [URL] lucid Release: The following signatures were invalid: BADSIG 2EBC26B60C5A2783 Medibuntu Packaging Team <admin@lists.medibuntu.org>
I have tried updating the keys, and got this:
apt-key adv --recv-keys --keyserver keyserver.ubuntu.com 2EBC26B60C5A2783
Executing: gpg --ignore-time-conflict --no-options --no-default-keyring --secret-keyring /etc/apt/secring.gpg --trustdb-name /etc/apt/trustdb.gpg --keyring /etc/apt/trusted.gpg --primary-keyring /etc/apt/trusted.gpg --recv-keys --keyserver keyserver.ubuntu.com 2EBC26B60C5A2783
gpg: requesting key 0C5A2783 from hkp server keyserver.ubuntu.com
gpg: key 0C5A2783: "Medibuntu Packaging Team <admin@lists.medibuntu.org>" 6 new signatures
gpg: no ultimately trusted keys found
gpg: Total number processed: 1
gpg: new signatures: 6
else had a problem with wheezy on cd1 install? I get to the install screen and can not go any farther as it will not pick up the keyboard or mouse. I have tried it on several PCs and also verified the disc. Just curious why there was not a 3/21 build? I have squeeze on my main drive and was wanting to install testing on my second drive with LXDE. It fun having stable running great on one drive and then playing around with testing on another. If you mess up so what format start over.
View 1 Replies View Related