Ubuntu :: Freewins Compiz Plugin "no Makefile Found"
Mar 30, 2011
I'm trying to install the Freewins Compiz plugin (because I often use my computer while I'm horizontal on the couch; and I realize that's lazy), and I'm trying to use the instructions from the page,I've googled this and found one guy that has the same problem but no solution, and other pages that talk about Freewins have the exact same instructions for installing.Does anybody have any idea how to get this working correctly?
View 4 Replies
ADVERTISEMENT
Feb 21, 2016
I seem to be running into this issue a lot when installing various programs. I downloaded and installed a tar file (Linux Wacom Project. xf86-input-wacom-0.32.0 specifically) for my Bamboo tablet. Here's what I did:
Code: Select allsudo apt-get install build-essential
Looks like everything went well, but it asked me for a CD?... I just ignored that and went to the next step in the guide.
Code: Select allsudo apt-get build-dep wacom-tools
Looks like everything went well here. But near the end I get this...
Code: Select allchecking for doxygen... no
configure: WARNING: doxygen not found - documentation targets will be skipped
checking for rint in -lm... yes
checking for XORG... no
configure: error: in `/home/mason/Desktop/xf86-input-wacom-0.32.0':
configure: error: The pkg-config script could not be found or is too old. Make sure it is in your PATH or set the PKG_CONFIG environment variable to the full path to pkg-config.
Alternatively, you may set the environment variables XORG_CFLAGS and XORG_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details.
I didn't really pay attention to THAT until I do...
Code: Select allcd ~/Desktop/linuxwacom-0.8.8-6
./configure --prefix=/usr
make
Where in I get this error message after I enter in Code: Select allmake at the terminal
Code: Select allmake: *** No targets specified and no makefile found. Stop.
View 11 Replies
View Related
May 1, 2010
I download a package of tar.gz ...
1:firstly I extract it on desktop
2:Then use cd command and go to extracted folder
3:To install that package i use
sudo make install. Then I got a error message
"make: *** No targets specified and no makefile found. Stop."
View 4 Replies
View Related
Aug 4, 2011
im trying to install Squid clamav with squid(fedora11, 386MB, 2.6kernel)..i configured clamd and is working fine,(squid wrking fine) then i tried to install squidclamav via (yum -y install curl-devel).then i downloaded squidclamav-4.0.tar.gz and extracted.. then i run ./configure and then make.but make install command wont work; it shows an error.
View 4 Replies
View Related
Feb 13, 2010
I have xubuntu 9.10 and I'm trying to install iw-0.9.19.When I use the command "make" I get this error:
/bin/sh: pkg-config: not found
/bin/sh: pkg-config: not found
Makefile:38: *** Cannot find development files for any supported version of libnl. Stop. I read the Readme file and it says: "To build IW, just enter make. If that fails, set the PKG_CONFIG_PATH environment variable to allow the Makefile to find libnl". I guess the problem is linking Makefile (in iw-0.9.19 directory) to libnl (version 1.1 correctly installed on xubuntu) via pkg_config_file.
View 6 Replies
View Related
Sep 19, 2010
I'm trying to load drivers from .tar.bz2 file. I got the .tar opened and extracted to directory ABC. When I try to CD to that directory, I get a message the directory does not exist even tho' I'm looking right at it and the ls command shows it. The full path is user/downloads.ABC.
When I try to run the next command $tar -xvzf DPB_RT2870_Linux_STA_x.x.x.x.tgz I get a message Ubuntu 10.04 cannot find -xvzf. When I try to run the Makefile command locate in the same ABC directory, I again the error message cannot find Makefile.
View 4 Replies
View Related
Mar 22, 2011
I downloaded mesa from their git repository a few days ago then built it and installed it. I've tried removing it just now with "make uninstall", but that feature isn't in the makefile. How I can remove it?
View 1 Replies
View Related
Dec 5, 2010
I needed an open source alternative to after effects so i went for jahshaka but after following the instructions, i type in 'make' and hit return and it says "make: *** No targets specified and no makefile found. Stop." am i missing something obvious? i have looked around the web, but no-one has this problem that i can find i am using ubuntu 10.04.
View 2 Replies
View Related
Dec 17, 2010
i have installed mouse trap by the Ubuntu "easy peasy" software center ,but for some reason it didn't work so i uninstalled it and start to install the mouse trap from herehttp://live.gnome.org/MouseTrap/Installationbut when did the "make" step it gave me that error:make: *** No targets specified and no makefile found. Stop.so how i fix thatand another problem that i have is when i go to a live radio on the net to listen it dose not work how do i change it to work like i changed to the "vlc player" to be the first program that opens
View 2 Replies
View Related
Oct 13, 2010
After upgrading from 10.04 to 10.10, I've noticed (as have others) that the Compiz plugin for multiple wallpapers on different desktops is broken. If I wish to move to a new screen with the Expo feature, the graphics behave oddly (i.e. things become blurry or windows look terrible). I found a work-around on Launchpad, but this is only a temporary fix to a long-term solution. Has anyone else here had this problem or figured out a way to solve it?
View 8 Replies
View Related
Oct 15, 2010
I just installed 10.10 this morning. No major complaints at this point, but I can't seem to find the Grid plugin for Compiz. Is it missing in 10.10? If not what do I need to do to activate it.
View 4 Replies
View Related
May 10, 2011
How can I get the scale plugin to show windows from all workspaces like I could before with 10.04 and Gnome?With Unity the scale plugin only "scales" windows that are on the current desktop/workspace.
View 4 Replies
View Related
Jun 9, 2010
Ubuntu 9.10
Kernel 2.6.32-22-generic
I'm attempting to replace gnome-panel with cairo (also called glx dock), but I'm noticing some strange interaction between cairo and compiz. I have the Window Previews compiz plugin enabled, but the cairo dock only previews the window when the window is already visible on the desktop. If the window is minimized, the plugin doesn't seem to work. Have I missed a crucial configuration option somewhere? I'll attach some screenshots to try to clarify the problem. Notice the placement of the mouse over the left-most icon on my dock in both screenshots.
View 2 Replies
View Related
May 2, 2011
I did a clean install and mounted my user folders/partitions back after removing everything else from the Home drive to ensure no incompatible leftovers from Maverick.Now, I am dissapointed to see that I can't get blur on my transparent windows. This worked like a charm in Maverick and it looked brilliant but now it's often hard to tell windows apart if there are windows below the active one. So I had to turn down transparency... I have D-bus enabled, proprietary drivers installed and I have been Google-searching like crazy to find a solution. None.. Do any of you know the status of this plugin in Natty? Should it work, does it? Or not?I have Focus blur activated and working, it helps but not enough. My videocard is Radeon HD 4650 (AGP).
View 5 Replies
View Related
Jun 19, 2009
When moving the mouse to the right side of the screen quickly, all the windows are small.Previously I was the first thing I was stopped by removing the mark from the Scale, but now stopped while still influence the rest.
View 4 Replies
View Related
Jan 1, 2011
I've just finished installing slack on my new computer, and after about 20 minutes of hair-pulling agony, I've gotten compiz working properly except for one plugin; the 3D windows plugin (windows hover over cube on rotate). I think it might be a corrupted ccsm- whenever I check the box next to the plugin, then try to rotate the cube, it is unchecked. Anyway, I know my graphics card (Geforce 6200 256Mb pci-e) is powerful enough to handle it since the driver installed properly and the effect worked on the knoppix live disk I used for partitioning. I'm running xfce and using emerald as the window decorator if it helps at all. It does the same thing with both animation packs.
View 4 Replies
View Related
May 31, 2010
I just downloaded slackware 13.1(x86) and i'm trying to compile ndiswrapper-1.56 using the slackbuild from slackbuils.org and i'm getting this error:
Code:
Makefile:535: /usr/src/linux-2.6.33.4/arch/i486/Makefile: No such file or directory
make[2]: *** No rule to make target `/usr/src/linux-2.6.33.4/arch/i486/Makefile'. Stop.
make[1]: *** [modules] Error 2
make: *** [all] Error 2
looks like the folder i486 doesn't exist
View 2 Replies
View Related
Mar 14, 2009
Using Compiz's animation plugin, only the open and close effects work. When any entries are listed under the "Animation Selection" for Minimize, Focus, or Shade; the animations do not play; and I receive a libnotify error: "Animation settings mismatch in 'Animation Selection' list for __<Minimize or Focus or Shade>___ event."This happens even with the Animation Selection values reset and even the entire Animation configuration reset. I use the Gconf backend, but this also occurs with a file-based configuration. This has never worked for me.
View 3 Replies
View Related
May 7, 2011
i m trying to install glib on my pc but i was always encounter a probelem in make. it says "No Target Specified No Makefile Found Stop"
[code]...
View 14 Replies
View Related
Aug 5, 2010
I recently switched over to Fedora 13 but I'm having a bit of trouble. I've tried writing simple programs in Emacs and Eclipse but neither will compile. It always gives the error, "make: *** No targets specified and no makefile found. Stop."
I've looked around at a couple of forums, but people with the same issue can't install software, but I can. I got Fedora from the Fedora website so I know its complete, but I have the sneaking suspicion that I'm just missing a file or something.
View 2 Replies
View Related
Oct 3, 2010
I want to load the package madwifi under opensuse from Index of /suse/11.1, but RealPlayer did not function correctly. The reason why I want to use madwifi is that I cannot start my internet with opensuse 11.1 using motherboard from asus with the ethernet adapter from Atheros AR 8121/AR8113 PCI-E Version 1.0.0.5. When I compile the delivered Linux drivers I got the failure message "Makefile:61: Linux kernel source not found". So I decided to take rpm from opensuse within madwifi. How/Where can I get the corrosponding madwifi elsewhere?
View 4 Replies
View Related
Jun 14, 2010
I'm trying to install Apache2::Request module (from CPAN.org) and in shell there is such messages: I'm using openSUSE 11.1, Perl 5.8
[Code]...
View 2 Replies
View Related
Jun 16, 2011
I am using Kubuntu 11.04 on ASUS K52Jc and when I start compiling this happens: (yes,yes I do ./configure; after that) q12345@Laptop $ make make: *** No targets specified and no makefile found. Stop. and what is so weird? Well, I can't do it on any other system that I tried (openSuSE, all Ubuntus, Debian...).
View 2 Replies
View Related
Jun 19, 2010
I'm using openSUSE 11.1, KDE I'm trying to install the module Apache2::Request to my OS. After the gzip -dc libapreq2-2.12.tar.gz | tar -xof - I typed in Shell these (as shown in INSTALLATION document of module): perl Makefile.PL --with-apache2-apxs=/path/to/apache2/bin/apxs Then something goes wrong, make doesn't work saying: make: *** No targets specified and no makefile found. Stop..
I think the problem is in the command perl Makefile.PL --with-apache2-apxs=/path/to/apache2/bin/apxs in section .../path/to/apache2/bin/apxs . What does mean ./path/to/apache2/bin/apxs? Maybe I should write the path to apache2 which contains a file named apxs? I did not find such file apxs. My apache2 path is /etc/apache2, but there is no file named apxs... Result for perl Makefile.PL --with-apache2-apxs=/path/to/apache2/bin/apxs:
[Code]....
View 3 Replies
View Related
May 25, 2010
Title says it all. Following the instructions at the site [URL] "Start using the Ubuntu One Music Store by going to Applications Sound & Video Rhythmbox Music Player." yields nothing.
View 2 Replies
View Related
Apr 30, 2010
I have just upgraded from a fully functional 9.10 to 10.04 which doesn't seem to find the correct intel video drivers when trying to activate compiz extra desktop effects on my laptop...
[Code].....
I tried reinstalling the video drivers using sudo apt-get install xserver-xorg-video-intel with no luck, telling me I already am using the latest version.
View 9 Replies
View Related
Nov 18, 2010
It is no longer running my default when I log in it did go screwy yesterday I reinstalled my nvidia driver and it started allowing to to activate it. This is what it was saying:
Code:
compiz (core) - Fatal: No valid GL extensions string found.
compiz (core) - Error: Failed to manage screen: 0
compiz (core) - Fatal: No manageable screens found on display :0.0
View 9 Replies
View Related
May 25, 2011
I recently swapped from courier to dovecot on my server and it's working fine, but I can't seem to get the autocreate plugin to work.I have followed the directions to enable the plugin and autocreate and autosubscribe 2 folders.After enabling debug I can see an error "autocreate: No namespace found" listed for both folders. I haven't been able to find any other instructions, docs or threads that suggest what has to be done to the private namespace to allow it to create these folders.
View 1 Replies
View Related
May 3, 2011
I'm trying to install compiz with a completely new install of slackware64-13.37. I had been using gsb gnome2 and compiz 0.8.6 under slackware64-13.1. I installed gsb gnome3 and, to my chagrin, found out that it is incompatible with compiz. I'm afraid I'm not "LEET" enough to install the old gnome (gnome2) pkg by pkg. Which version of compiz did you successfully install and in which desktop?
View 11 Replies
View Related
Feb 3, 2011
i wanted to change the opacity settings in compiz config settings manager (i read it in the forum post that i can change opacity using compiz settings) when i opened the ccsm, i did not find the opacity settings in general options...do i have to update or upgrade?
View 4 Replies
View Related
